CISCO-LRE-CPE-MIB
22 objects
The MIB module for the Cisco Long Reach Ethernet Customer Premise Equipment device information. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** CPE - Customer Premise Equipment DSL - Digital Subscriber Loop VDSL - Very High Speed DSL LRE - Long Reach Ethernet
Imported Objects
| BRIDGE-MIB | dot1dTpFdbAddress |
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.340 | IdentityciscoLreCpeMIB | The MIB module for the Cisco Long Reach Ethernet Customer Premise Equipment device information. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** CPE - Customer Pre… | ||
| 1.3.6.1.4.1.9.9.340.0 | NodeclreCpeMIBNotifications | |||
| 1.3.6.1.4.1.9.9.340.0.0 | NodeclreCpeMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.9.9.340.1 | NodeciscoLreCpeMIBObjects | |||
| 1.3.6.1.4.1.9.9.340.1.1 | NodeclreCpeDot1dTp | |||
| 1.3.6.1.4.1.9.9.340.1.1.1 | TableclreCpeDot1dTpFdbTable | not-accessible | current | A table that supplements the information from the BRIDGE-MIB. The BRIDGE-MIB tracks the MAC address to switch interface mapping in the dot1dTpFdbTable. On the … |
| 1.3.6.1.4.1.9.9.340.1.1.1.1 | RowclreCpeDot1dTpFdbEntry | not-accessible | current | An entry that supplements the information in the dot1dTpFdbTable table from the BRIDGE-MIB. |
| 1.3.6.1.4.1.9.9.340.1.1.1.1.1 | ColumnclreCpeDot1dBasePortIfIndex | read-only | current | The value of the instance of the ifIndex object, define in MIB-II, for the interface corresponding to this CPE port. The Forwarding database on the switch trac… |
| 1.3.6.1.4.1.9.9.340.1.2 | NodeclreCpePort | |||
| 1.3.6.1.4.1.9.9.340.1.2.1 | TableclreCpePortTable | not-accessible | current | A list of LRE CPE port entries. The number of entries is determined by the number of Long Reach Ethernet interfaces (to which the CPE attaches) on the switch a… |
| 1.3.6.1.4.1.9.9.340.1.2.1.1 | RowclreCpePortEntry | not-accessible | current | Entry containing information for a particular CPE Fast Ethernet port. The entries are created as new CPE devices are discovered. A new CPE device is discovered… |
| 1.3.6.1.4.1.9.9.340.1.2.1.1.1 | ColumnclreCpePortAdminStatus | read-write | current | The desired state of the CPE port. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all CPE ports s… |
| 1.3.6.1.4.1.9.9.340.1.2.1.1.2 | ColumnclreCpePortAdminSpeed | read-write | current | This object controls the speed of this CPE Fast Ethernet port. When set to autoDetect(1), the CPE port negotiates with its peer for the optimum speed, either s… |
| 1.3.6.1.4.1.9.9.340.1.2.1.1.3 | ColumnclreCpePortAdminDuplex | read-write | current | This object controls the duplex of this CPE Fast Ethernet port. When set to autoDetect(1), the CPE port negotiates with its peer for the optimum duplex setting… |
| 1.3.6.1.4.1.9.9.340.1.2.1.1.4 | ColumnclreCpePortAdminProtected | read-write | current | This object configures a CPE Fast Ethernet port as a protected port when its value is set to true. Data traffic is disallowed between two CPE ports configured … |
| 1.3.6.1.4.1.9.9.340.1.2.1.1.5 | ColumnclreCpePortOperProtected | read-only | current | The value represented by this object is the actual protected port state of the CPE port. The object value is true when this CPE port is configured as a protect… |
| 1.3.6.1.4.1.9.9.340.2 | NodeclreCpeMIBConformance | |||
| 1.3.6.1.4.1.9.9.340.2.1 | NodeclreCpeMIBCompliances | |||
| 1.3.6.1.4.1.9.9.340.2.1.1 | ComplianceclreCpeMIBCompliance | current | The compliance statement for switches supporting the LRE CPE devices. | |
| 1.3.6.1.4.1.9.9.340.2.2 | NodeclreCpeMIBGroups | |||
| 1.3.6.1.4.1.9.9.340.2.2.1 | GroupclreCpeDot1dTpGroup | current | The collection of MIB objects used to monitor the transparent learning bridge on the LRE CPE. | |
| 1.3.6.1.4.1.9.9.340.2.2.2 | GroupclreCpePortGroup | current | The collection of MIB objects used to manage and monitor LRE CPE Fast Ethernet ports. |