CISCO-LWAPP-AAA-MIB
146 objects
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is used to manage AAA information on the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC + + CC + + + + + + + +......+ +......+ +......+ .. . . .. . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + AP + + AP + + AP + + AP + + + + + + + + + +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Terminal Access Controller Access-Control System ( TACACS ) A remote authentication protocol that is used to communicate with an authentication server. TACACS allows a remote access server to communicate with an authentication server in order to determine if the user has access to the network. Remote Authentication Dial In User Service (RADIUS) It is an AAA (authentication, authorization and accounting) protocol for applications such as network access or IP mobility. It is intended to work in both local and roaming situations. Wireless LAN ( WLAN ) It is a wireless local area network, which is the linking of two or more computers without using wires. It uses radio communication to accomplish the same functionality of a wired LAN. PAP - Password Authentication Protocol CHAP - Challenge Handshake Authentication Protocol MD5-CHAP - Message Digest 5 Challenge Handshake Authentication Protocol LSC - Local Significant Certificate LSC can be used if we want our own public key infrastructure (PKI) to provide better security, to have control of our certificate authority (CA), and to define policies, restrictions, and usages on the generated certificates. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Imported Objects
| CISCO-LWAPP-TC-MIB | CLSecKeyFormat |
| CISCO-LWAPP-WLAN-MIB | cLWlanIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoURLString |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus StorageType TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.598 | IdentityciscoLwappAAAMIB | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weight Access Point Protocol tunnel… | ||
| 1.3.6.1.4.1.9.9.598.0 | NodeciscoLwappAAAMIBNotifs | |||
| 1.3.6.1.4.1.9.9.598.0.1 | NotificationciscoLwappAAARadiusServerGlobalActivated | current | This notification is sent by the agent when the controller detects that the RADIUS server is activated in the global list. The RADIUS server is identified by t… | |
| 1.3.6.1.4.1.9.9.598.0.2 | NotificationciscoLwappAAARadiusServerGlobalDeactivated | current | This notification is sent by the agent when the controller detects that the RADIUS server is deactivated in the global list. The RADIUS server is identified by… | |
| 1.3.6.1.4.1.9.9.598.0.3 | NotificationciscoLwappAAARadiusServerWlanActivated | current | This notification is sent by the agent when the controller detects that the RADIUS server is activated on the WLAN. The RADIUS server is identified by the addr… | |
| 1.3.6.1.4.1.9.9.598.0.4 | NotificationciscoLwappAAARadiusServerWlanDeactivated | current | This notification is sent by the agent when the controller detects that the RADIUS server is deactivated on the WLAN. The RADIUS server is identified by the ad… | |
| 1.3.6.1.4.1.9.9.598.0.5 | NotificationciscoLwappAAARadiusReqTimedOut | current | This notification is sent by the agent when the controller detects that the RADIUS server failed to respond to request from a client/user. The RADIUS server is… | |
| 1.3.6.1.4.1.9.9.598.0.6 | NotificationciscoLwappAAARadiusAuthServerAvailable | current | This notification is sent by the agent when the controller detects that the RADIUS authenticating server is available/responsive when it was previously unavail… | |
| 1.3.6.1.4.1.9.9.598.0.7 | NotificationciscoLwappAAARadiusAuthServerUnavailable | current | This notification is sent by the agent when the controller detects that the RADIUS authenticating server is unavailable/unresponsive when it was previously ava… | |
| 1.3.6.1.4.1.9.9.598.0.8 | NotificationciscoLwappAAARadiusAcctServerAvailable | current | This notification is sent by the agent when the controller detects that the RADIUS accounting server is available/responsive when it was previously unavailable… | |
| 1.3.6.1.4.1.9.9.598.0.9 | NotificationciscoLwappAAARadiusAcctServerUnavailable | current | This notification is sent by the agent when the controller detects that the RADIUS accounting server is unavailable/unresponsive when it was previously availab… | |
| 1.3.6.1.4.1.9.9.598.1 | NodeciscoLwappAAAMIBObjects | |||
| 1.3.6.1.4.1.9.9.598.1.1 | NodeclaConfigObjects | |||
| 1.3.6.1.4.1.9.9.598.1.1.1 | TableclaPriorityTable | not-accessible | current | This table contains entries for AAA authentication methods configured in the controller. At startup, all the entries in this table are set up by the central co… |
| 1.3.6.1.4.1.9.9.598.1.1.1.1 | RowclaPriorityEntry | not-accessible | current | A conceptual row in claPriorityTable. There is an entry in this table for each AAA authentication method available at the agent, as identified by a value of cl… |
| 1.3.6.1.4.1.9.9.598.1.1.1.1.1 | ColumnclaPriorityAuth | not-accessible | current | This object represents the authentication method used to authenticate users. local - indicates that local password is used for authentication. radius - indicat… |
| 1.3.6.1.4.1.9.9.598.1.1.1.1.2 | ColumnclaPriorityOrder | read-write | current | This object specifies the priority order of an authentication method to be used in user authentication for a session. At start up, the agent assigns the value … |
| 1.3.6.1.4.1.9.9.598.1.1.2 | TableclaTacacsServerTable | not-accessible | current | This table represents the information about configuring the Accounting, Authentication and Authorization servers. The creation of a new row in claTacacsServerT… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1 | RowclaTacacsServerEntry | not-accessible | current | Each entry in this table provides information about the server that is configured for AAA. Each entry is uniquely identified by the server type and priority th… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.1 | ColumnclaTacacsServerType | not-accessible | current | This attribute identifies the type of the server being configured. |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.2 | ColumnclaTacacsServerPriority | not-accessible | current | The priority value for this entry. This value determines the unique priority for this entry. The priority value for this entry determines the order in which th… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.3 | ColumnclaTacacsServerAddressType | read-create | current | This object specifies the type of the network address made available through claTacacsServerAddress. This object must be set to a valid value before setting th… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.4 | ColumnclaTacacsServerAddress | read-create | current | This object specifies the address of the AAA server. The type of the address stored in this object is determined by the claTacacsServerAddressType object. This… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.5 | ColumnclaTacacsServerPortNum | read-create | current | This object specifies the port number for this server. It must be set to a valid value before setting the row to 'active'. |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.6 | ColumnclaTacacsServerEnabled | read-create | current | This object specifies the server state. A value of 'true' indicates that the server state is enabled. A value of 'false' indicates that the server state is dis… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.7 | ColumnclaTacacsServerSecretType | read-create | current | This object specifies the server secret type. The claTacacsServerSecret value is set based on this type. When reading this object, the value 'default' is alway… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.8 | ColumnclaTacacsServerSecret | read-create | current | This object specifies the key configured for this server. For get operation this always returns a string with asterisks. This object must be set to a valid val… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.9 | ColumnclaTacacsServerTimeout | read-create | current | This object specifies the number of seconds between retransmissions. This object can be modified when a row is in the 'active' state. |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.10 | ColumnclaTacacsServerStorageType | read-create | current | This object specifies the storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object… |
| 1.3.6.1.4.1.9.9.598.1.1.2.1.11 | ColumnclaTacacsServerRowStatus | read-create | current | This object specifies to add or delete an entry in this table. The required parameters for this entry are claTacacsServerAddress, claTacacsServerAddressType, c… |
| 1.3.6.1.4.1.9.9.598.1.1.3 | TableclaWlanTable | not-accessible | current | AAA table corresponding to a WLAN. When WLAN is added a new entry gets added to this table. The entry is removed when the WLAN is removed. |
| 1.3.6.1.4.1.9.9.598.1.1.3.1 | RowclaWlanEntry | not-accessible | current | Each entry in this table provides AAA information for a WLAN. |
| 1.3.6.1.4.1.9.9.598.1.1.3.1.1 | ColumnclaWlanAcctServerEnabled | read-write | current | This object specifies the status to indicate whether the account server is enabled(true) or disabled(false) for this WLAN. A value of 'true' indicates that the… |
| 1.3.6.1.4.1.9.9.598.1.1.3.1.2 | ColumnclaWlanAuthServerEnabled | read-write | current | This object specifies the status whether the authentication server is enabled(true) or disabled(false) for this WLAN. A value of 'true' indicates that the serv… |
| 1.3.6.1.4.1.9.9.598.1.1.3.1.3 | ColumnclaWlanOverwriteInterface | read-write | current | This object specifies the status whether dynamic interface is enabled(true) or disabled(false) for this WLAN. A value of 'true' indicates that the dynamic inte… |
| 1.3.6.1.4.1.9.9.598.1.1.3.1.4 | ColumnclaWlanInterimUpdate | read-write | current | This object specifies the status whether the interim update is enabled(true) or disabled(false) for this WLAN. A value of 'true' indicates that the interim upd… |
| 1.3.6.1.4.1.9.9.598.1.1.3.1.5 | ColumnclaWlanInterimUpdateInterval | read-write | current | This object specifies the interim update interval configuration. |
| 1.3.6.1.4.1.9.9.598.1.1.4 | ScalarclaRadiusServerGlobalActivatedEnabled | read-write | current | The object specifies to control the generation of ciscoLwappAAARadiusServerGlobalActivated notification. A value of 'true' indicates that the agent generates c… |
| 1.3.6.1.4.1.9.9.598.1.1.5 | ScalarclaRadiusServerGlobalDeactivatedEnabled | read-write | current | The object specifies to control the generation of ciscoLwappAAARadiusServerGlobalDeactivated notification. A value of 'true' indicates that the agent generates… |
| 1.3.6.1.4.1.9.9.598.1.1.6 | ScalarclaRadiusServerWlanActivatedEnabled | read-write | current | The object specifies to control the generation of ciscoLwappAAARadiusServerWlanActivated notification. A value of 'true' indicates that the agent generates cis… |
| 1.3.6.1.4.1.9.9.598.1.1.7 | ScalarclaRadiusServerWlanDeactivatedEnabled | read-write | current | The object specifies to control the generation of ciscoLwappAAARadiusServerWlanDeactivated notification. A value of 'true' indicates that the agent generates c… |
| 1.3.6.1.4.1.9.9.598.1.1.8 | ScalarclaRadiusReqTimedOutEnabled | read-write | current | The object specifies to control the generation of ciscoLwappAAARadiusReqTimedOut notification. A value of 'true' indicates that the agent generates ciscoLwappA… |
| 1.3.6.1.4.1.9.9.598.1.1.9 | ScalarclaSaveUserData | read-write | current | This object specifies to save the guest user config to NVRAM. A value of 'true' indicates that the data is saved. A value of 'false' indicates the data is not … |
| 1.3.6.1.4.1.9.9.598.1.1.10 | ScalarclaWebRadiusAuthentication | read-write | current | This object specifies to configure the Web RADIUS Authentication parameters on the WLC. PAP (1) - Configure Web RADIUS Authentication in PAP mode. CHAP (2) - C… |
| 1.3.6.1.4.1.9.9.598.1.1.11 | ScalarclaRadiusFallbackMode | read-write | current | This object specifies to configure the RADIUS Fallback Test mode on the WLC. Following are the configurable options:- off (1) - Disables RADIUS server fallback… |
| 1.3.6.1.4.1.9.9.598.1.1.12 | ScalarclaRadiusFallbackUsername | read-write | current | This object specifies to configure the RADIUS Fallback Test. username to be sent in dead server probes |
| 1.3.6.1.4.1.9.9.598.1.1.13 | ScalarclaRadiusFallbackInterval | read-write | current | This object specifies to configure the probe interval (when claRadiusFallbackMode is in active mode) or inactive time (when claRadiusFallbackMode is in passive… |
| 1.3.6.1.4.1.9.9.598.1.1.14 | ScalarclaRadiusAuthMacDelimiter | read-write | current | This object specifies the delimiter to be used for RADIUS authentication servers. The possible values allowed are - no delimiter (0) - as in xxxxxxxxxxxx. colo… |
| 1.3.6.1.4.1.9.9.598.1.1.15 | ScalarclaRadiusAcctMacDelimiter | read-write | current | This object specifies the delimiter to be used for RADIUS accounting servers. The possible values allowed are - no delimiter (0) - as in xxxxxxxxxxxx. colon (1… |
| 1.3.6.1.4.1.9.9.598.1.1.16 | ScalarclaAcceptMICertificate | read-write | current | This object specifies if controller will accept Manufactured Installed Certificate from the access points as part of authorization. A value of 'true' indicates… |
| 1.3.6.1.4.1.9.9.598.1.1.17 | ScalarclaAcceptLSCertificate | read-write | current | This object specifies if controller will accept Local Significant Certificate from access points as part of authorization. A value of 'true' indicates that the… |
| 1.3.6.1.4.1.9.9.598.1.1.18 | ScalarclaAllowAuthorizeLscApAgainstAAA | read-write | current | This object specifies if access points to be authorized using a AAA RADIUS server or local database. A value of 'true' indicates that the access points would b… |
| 1.3.6.1.4.1.9.9.598.1.1.19 | ScalarclaSscHashValidationEnabled | read-write | current | This object specifies if the SSC Hash Validation is configured on the controller. If true, then SSC Hash Validation is enabled. If false, then SSC Hash validat… |
| 1.3.6.1.4.1.9.9.598.1.1.20 | ScalarclaSscCertificateSubject | read-only | current | This object indicates the SSC Certificate subject value of the controller. |
| 1.3.6.1.4.1.9.9.598.1.1.21 | ScalarclaSscCertificateValidity | read-only | current | This object indicates the SSC Certificate validity value of the controller. |
| 1.3.6.1.4.1.9.9.598.1.1.22 | ScalarclaSscCertificateHashKey | read-only | current | This object indicates the SSC Certificate hash key value of the controller. |
| 1.3.6.1.4.1.9.9.598.1.1.23 | TableclaRadiusAuthServerTable | not-accessible | current | This table represents the conceptual listing the RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.9.9.598.1.1.23.1 | RowclaRadiusAuthServerEntry | not-accessible | current | An entry is a conceptual row representing a RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.1 | ColumnclaRadiusAuthServerIndex | read-create | current | This object specifies a number uniquely identifying each RADIUS authentication server with which this client communicates. |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.2 | ColumnclaRadiusAuthServerIPSecAuthMethod | read-create | current | This object specifies IPSec authentication method over RADIUS. The value of 'psk' indicates that the authentication is through PSK method. The value of 'cert' … |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.3 | ColumnclaRadiusAuthServerKey | read-create | current | This object specifies the authentication and encryption key shared between the Radius client and this Radius Server. When the claRadiusAuthServerKeyFormat is h… |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.4 | ColumnclaRadiusAuthServerKeyFormat | read-create | current | This object specifies the format of the server key. When hex, the number of characters in the key should be even. The value of 'hex' indicates that the format … |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.5 | ColumnclaRadiusAuthServerIsActive | read-only | current | This object indicates the status of the RADIUS authentication server. The value of 'disable' indicates that the status is disabled. The value of 'enable' indic… |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.6 | ColumnclaRadiusAuthServerTunnelProxy | read-create | current | This object specifies active RADIUS authentication server's tunnel proxy. A value of 'true' indicates that the tunnel proxy is enabled. A value of 'false' indi… |
| 1.3.6.1.4.1.9.9.598.1.1.23.1.7 | ColumnclaRadiusAuthServerPacState | read-create | current | This object specifies active RADIUS authentication server's PAC (Protected Access Control) state. A value of 'true' indicates that the server PAC state is enab… |
| 1.3.6.1.4.1.9.9.598.1.1.24 | TableclaRadiusAccServerTable | not-accessible | current | This table represents the conceptual table listing the RADIUS accounting servers with which the client shares a secret. |
| 1.3.6.1.4.1.9.9.598.1.1.24.1 | RowclaRadiusAccServerEntry | not-accessible | current | An entry is a conceptual row representing a RADIUS accounting server with which the client shares a secret. |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.1 | ColumnclaRadiusAccServerIndex | read-create | current | This object specifies a number uniquely identifying each RADIUS accounting server with which this client communicates. |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.2 | ColumnclaRadiusAccServerIPSecAuthMethod | read-create | current | This object specifies IPSec Authentication method over RADIUS. The value of 'psk' indicates that the authentication is through PSK method. The value of 'cert' … |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.3 | ColumnclaRadiusAccServerKey | read-create | current | This object specifies the accounting and encryption key shared between the RADIUS client and this RADIUS Server. When the claRadiusAccServerKeyFormat is hex it… |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.4 | ColumnclaRadiusAccServerKeyFormat | read-create | current | This object specifies the format of the server key. When hex, the number of characters in the key should be even. The value of 'hex' indicates that the format … |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.5 | ColumnclaRadiusAccServerIsActive | read-only | current | This object indicates the status of the RADIUS accounting server. The value of 'disable' indicates that status is disabled. The value of 'enable' indicates tha… |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.6 | ColumnclaRadiusAccServerTunnelProxy | read-create | current | This object specifies active RADIUS accounting server's tunnel proxy. A value of 'true' indicates that the tunnel proxy is enabled. A value of 'false' indicate… |
| 1.3.6.1.4.1.9.9.598.1.1.24.1.7 | ColumnclaRadiusAccServerPacState | read-create | current | This object specifies active RADIUS accounting server's PAC (Protected Access Control). A value of 'true' indicates that the server PAC state is enabled. A val… |
| 1.3.6.1.4.1.9.9.598.1.1.25 | TableclaRadiusAuthServerRealmTable | not-accessible | current | This table represents the conceptual table listing the RADIUS authentication servers with realm config. |
| 1.3.6.1.4.1.9.9.598.1.1.25.1 | RowclaRadiusAuthServerRealmEntry | not-accessible | current | An entry is a conceptual row representing a RADIUS authentication server with a particular realm. |
| 1.3.6.1.4.1.9.9.598.1.1.25.1.1 | ColumnclaRadiusAuthServerRealm | not-accessible | current | This object represents authentication realm string on this index. This is used to filter the realms that are received from the client on the controller. |
| 1.3.6.1.4.1.9.9.598.1.1.25.1.2 | ColumnclaRadiusAuthRealmRowStatus | read-create | current | This object specifies the row status is used to control the realm to add or delete an entry in this table. |
| 1.3.6.1.4.1.9.9.598.1.1.26 | TableclaRadiusAcctServerRealmTable | not-accessible | current | This table represents the conceptual table listing the RADIUS accounting servers with which the client shares a realm. |
| 1.3.6.1.4.1.9.9.598.1.1.26.1 | RowclaRadiusAcctServerRealmEntry | not-accessible | current | An entry is a conceptual row representing a RADIUS accounting server with a particular realm. |
| 1.3.6.1.4.1.9.9.598.1.1.26.1.1 | ColumnclaRadiusAcctServerRealm | not-accessible | current | This object represents the accounting realm string on this index. This is used to filter the realms that are received from the client on the controller. |
| 1.3.6.1.4.1.9.9.598.1.1.26.1.2 | ColumnclaRadiusAcctRealmRowStatus | read-create | current | This object specifies the row status, used to control the realm to add or delete an entry in this table. |
| 1.3.6.1.4.1.9.9.598.1.1.27 | ScalarclaTacacsFallbackTestInterval | read-write | current | This object specifies the TACACS Fallback Test Interval in seconds. |
| 1.3.6.1.4.1.9.9.598.1.2 | NodeclaStatusObjects | |||
| 1.3.6.1.4.1.9.9.598.1.2.1 | TableclaRadiusServerTable | not-accessible | current | This table represents the information about the requests sent to the RADIUS servers. When a new request gets sent to the RADIUS server an entry gets added to t… |
| 1.3.6.1.4.1.9.9.598.1.2.1.1 | RowclaRadiusServerEntry | not-accessible | current | Each entry in this table provides information about a request that is sent to a RADIUS server. Each entry is uniquely identified by the request identifier. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.1 | ColumnclaRadiusReqId | not-accessible | current | This object indicates the request identifier of the request sent to the RADIUS server. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.2 | ColumnclaRadiusAddressType | read-only | current | This object indicates the address type for the RADIUS server. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.3 | ColumnclaRadiusAddress | read-only | current | This object indicates the address of the RADIUS server. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.4 | ColumnclaRadiusPortNum | read-only | current | This object indicates the port number for the RADIUS server. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.5 | ColumnclaRadiusWlanIdx | read-only | current | This object indicates the WLAN index whether the RADIUS server is activating and deactivating. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.6 | ColumnclaRadiusClientMacAddress | read-only | current | This object indicates the client MAC address that sent the request identified by the claRadiusReqId. |
| 1.3.6.1.4.1.9.9.598.1.2.1.1.7 | ColumnclaRadiusUserName | read-only | current | This object identifies the user for whom the request identified by the claRadiusReqId was sent. |
| 1.3.6.1.4.1.9.9.598.1.2.2 | ScalarclaDBCurrentUsedEntries | read-only | current | This object specifies the current database entries used. This includes the number of users, mac filters configured in the system. |
| 1.3.6.1.4.1.9.9.598.1.2.3 | ScalarclaRadiusAuthClientAccessRequestsTotal | read-only | current | This object indicates the number of RADIUS Access-Request packets sent by the controller. This also includes retransmissions. |
| 1.3.6.1.4.1.9.9.598.1.2.4 | ScalarclaRadiusAuthClientAccessResponseTotal | read-only | current | This object indicates the number of RADIUS Auth response packets received by the controller. This includes 'Access-Accept', 'Access-Reject' and 'Access-Challen… |
| 1.3.6.1.4.1.9.9.598.1.2.5 | ScalarclaRadiusAuthClientAccessAcceptsTotal | read-only | current | This object indicates the number of RADIUS Access-Accept packets received by the controller. |
| 1.3.6.1.4.1.9.9.598.1.2.6 | TableclaRadiusServerAvpTable | not-accessible | current | This table represents the information about the avp entries sent in the authentication and accounting packets to radius servers. These avp entries are populate… |
| 1.3.6.1.4.1.9.9.598.1.2.6.1 | RowclaRadiusServerAvpEntry | not-accessible | current | Each entry in this table provides information about a request that is sent to a RADIUS server. Each entry is uniquely identified by the wlan id,radius type and… |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.1 | ColumnclaWlanId | not-accessible | current | This object indicates the wlan id of the ssid profile for which the avp entries are applied. |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.2 | ColumnclaRadiusType | not-accessible | current | This object indicates the radius type for which the packets are sent, it takes the value auth(1), acct (2) or both (3) |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.3 | ColumnclaAvpEntryId | not-accessible | current | This object identifies the entry index for this avp pair. |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.4 | ColumnclaAvpVendorId | read-only | current | This object indicates the vendor id of this radius avp entry |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.5 | ColumnclaAvpAttribute | read-only | current | This object indicates the attribute id for each vendor in the avp pair |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.6 | ColumnclaAvpType | read-only | current | This object indicates the value type in the avp pair. |
| 1.3.6.1.4.1.9.9.598.1.2.6.1.7 | ColumnclaAvpValue | read-only | current | This object indicates the value of the avp pair which is as per the type, currently only the string is returned for all types of values. |
| 1.3.6.1.4.1.9.9.598.1.3 | NodeclaGlobalObjects | |||
| 1.3.6.1.4.1.9.9.598.1.3.1 | ScalarclaTacacsDnsServerEnabled | read-write | current | This object specifies whether TACACS DNS feature is enabled on the controller A value of 'true' indicates that TACACS DNS feature is enabled. A value of 'false… |
| 1.3.6.1.4.1.9.9.598.1.3.2 | ScalarclaTacacsDnsServerAddressType | read-write | current | This object specifies the TACACS DNS server address type. |
| 1.3.6.1.4.1.9.9.598.1.3.3 | ScalarclaTacacsDnsServerAddress | read-write | current | This object specifies the TACACS DNS server address. |
| 1.3.6.1.4.1.9.9.598.1.3.4 | ScalarclaTacacsDnsServerPort | read-write | current | This object specifies the port number for TACACS DNS server. |
| 1.3.6.1.4.1.9.9.598.1.3.5 | ScalarclaTacacsDnsServerSecretType | read-write | current | This object specifies the secret key type of TACACS DNS server. |
| 1.3.6.1.4.1.9.9.598.1.3.6 | ScalarclaTacacsDnsServerSecret | read-write | current | This object specifies the secret key configured for TACACS DNS server.The secret key and type has to be set together.For get operation this object always retur… |
| 1.3.6.1.4.1.9.9.598.1.3.7 | ScalarclaTacacsDnsServerURL | read-write | current | This object specifies the URL of the TACACS DNS server. |
| 1.3.6.1.4.1.9.9.598.1.3.8 | ScalarclaTacacsDnsServerTimeout | read-write | current | This object specifies the TACACS DNS server timeout in days. |
| 1.3.6.1.4.1.9.9.598.1.3.9 | ScalarclaRadiusDnsServerEnabled | read-write | current | This object specifies whether Radius DNS feature is enabled on the controller A value of 'true' indicates that Radius DNS feature is enabled. A value of 'false… |
| 1.3.6.1.4.1.9.9.598.1.3.10 | ScalarclaRadiusDnsServerAddressType | read-write | current | This object specifies the Radius DNS server address type. |
| 1.3.6.1.4.1.9.9.598.1.3.11 | ScalarclaRadiusDnsServerAddress | read-write | current | This object specifies the Radius DNS server address. |
| 1.3.6.1.4.1.9.9.598.1.3.12 | ScalarclaRadiusDnsServerPort | read-write | current | This object specifies the port number for Radius DNS server. |
| 1.3.6.1.4.1.9.9.598.1.3.13 | ScalarclaRadiusDnsServerSecretType | read-write | current | This object specifies the secret key type of Radius DNS server. |
| 1.3.6.1.4.1.9.9.598.1.3.14 | ScalarclaRadiusDnsServerSecret | read-write | current | This object specifies the secret key configured for Radius DNS server.The secret key and type has to be set together.For get operation this object always retur… |
| 1.3.6.1.4.1.9.9.598.1.3.15 | ScalarclaRadiusDnsServerURL | read-write | current | This object specifies the URL of the Radius DNS server. |
| 1.3.6.1.4.1.9.9.598.1.3.16 | ScalarclaRadiusDnsServerTimeout | read-write | current | This object specifies the Radius DNS server timeout in days. |
| 1.3.6.1.4.1.9.9.598.1.3.17 | ScalarclaAAARadiusAuthCallStationIdType | read-write | current | This object specifies the call station ID information sent in RADIUS auth messages. ipAddr(0) : Sets Call Station Id Type to the system's IP Address. macAddr(1… |
| 1.3.6.1.4.1.9.9.598.1.3.18 | ScalarclaRadiusDnsAuthnetworkState | read-write | current | This object specifies whether the Radius DNS server auth network flag is enabled (true) or disabled (false). A value of 'true' indicates that auth network flag… |
| 1.3.6.1.4.1.9.9.598.1.3.19 | ScalarclaRadiusDnsAuthmgmtState | read-write | current | This object specifies whether the Radius DNS server auth management flag is enabled (true) or disabled(false). A value of 'true' indicates that auth management… |
| 1.3.6.1.4.1.9.9.598.1.3.20 | ScalarclaRadiusDnsAcctnetworkState | read-write | current | This object specifies whether the Radius DNS server accounting network flag is enabled (true) or disabled (false). A value of 'true' indicates that accounting … |
| 1.3.6.1.4.1.9.9.598.1.3.21 | ScalarclaRadiusDnsAuthRetransmitTimeout | read-write | current | This object specifies the Radius Authentication DNS server's re-transmit Timeout. |
| 1.3.6.1.4.1.9.9.598.1.3.22 | ScalarclaRadiusDnsAcctRetransmitTimeout | read-write | current | This object specifies the Radius Accounting DNS server's re-transmit Timeout. |
| 1.3.6.1.4.1.9.9.598.1.3.23 | ScalarclaRadiusDnsAuthRfc3576State | read-write | current | This object specifies whether the Radius DNS server authentication server RFC3576 flag is enabled (true) or disabled(false). A value of 'true' indicates that a… |
| 1.3.6.1.4.1.9.9.598.1.3.24 | ScalarclaRadiusFramedMtu | read-write | current | This object specifies framed-mtu-size for Radius EAP |
| 1.3.6.1.4.1.9.9.598.1.3.25 | ScalarclaRadiusDnsAuthMgmtRetransmitTimeout | read-write | current | This object specifies the Radius Authentication DNS server's Mgmt-Retransmit Timeout. |
| 1.3.6.1.4.1.9.9.598.1.3.26 | ScalarclaMgmtUserReauthInterval | read-write | current | This object specifies termination-interval for management users. |
| 1.3.6.1.4.1.9.9.598.2 | NodeciscoLwappAAAMIBConform | |||
| 1.3.6.1.4.1.9.9.598.2.1 | NodeciscoLwappAAAMIBCompliances | |||
| 1.3.6.1.4.1.9.9.598.2.1.1 | ComplianceciscoLwappAAAMIBCompliance | deprecated | The compliance statement for the SNMP entities that implement the ciscoLwappAAAMIB module. | |
| 1.3.6.1.4.1.9.9.598.2.1.2 | ComplianceciscoLwappAAAMIBComplianceRev1 | current | The compliance statement for the SNMP entities that implement the ciscoLwappAAAMIB module. | |
| 1.3.6.1.4.1.9.9.598.2.2 | NodeciscoLwappAAAMIBGroups | |||
| 1.3.6.1.4.1.9.9.598.2.2.1 | GroupciscoLwappAAAMIBConfigGroup | current | This collection of objects specifies the required parameters for AAA. | |
| 1.3.6.1.4.1.9.9.598.2.2.2 | GroupciscoLwappAAAMIBSaveUserConfigGroup | current | These is the configuration parameter related to guest user configuration saving. | |
| 1.3.6.1.4.1.9.9.598.2.2.3 | GroupciscoLwappAAAMIBNotifsGroup | current | This collection of objects specifies the notifications for AAA. | |
| 1.3.6.1.4.1.9.9.598.2.2.4 | GroupciscoLwappAAAMIBStatusObjsGroup | current | This collection of objects represents the information about the general status attributes for AAA. | |
| 1.3.6.1.4.1.9.9.598.2.2.5 | GroupciscoLwappAAAMIBDBEntriesGroup | current | This is the additional object which represent the information about the general status attributes for AAA. | |
| 1.3.6.1.4.1.9.9.598.2.2.6 | GroupciscoLwappAAAMIBRadiusConfigGroup | current | These are the RADIUS web authentication and fallback related configuration parameters on the WLC. | |
| 1.3.6.1.4.1.9.9.598.2.2.7 | GroupciscoLwappAAAMIBAPPolicyConfigGroup | current | These are the AP Policy related configuration parameters on the WLC. | |
| 1.3.6.1.4.1.9.9.598.2.2.8 | GroupciscoLwappAAAMIBWlanAuthAccServerConfigGroup | current | These are the authentication and account server configuration parameters per wlan. |