CISCO-LWAPP-INTERFACE-MIB
59 objects
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB helps to manage the WLANs on the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected to. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the controllers. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Imported Objects
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.686 | IdentityciscoLwappInterfaceMIB | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel … | ||
| 1.3.6.1.4.1.9.9.686.0 | NodeciscoLwappInterfaceMIBNotifs | |||
| 1.3.6.1.4.1.9.9.686.0.1 | NotificationciscoLwappInterfaceAddressChanged | current | This notification is generated after the address of an interface is changed. | |
| 1.3.6.1.4.1.9.9.686.0.2 | NotificationciscoLwappInterfaceIpv6AddressStatus | current | This notification is generated after the Ipv6 address status is changed | |
| 1.3.6.1.4.1.9.9.686.1 | NodeciscoLwappInterfaceMIBObjects | |||
| 1.3.6.1.4.1.9.9.686.1.1 | NodeciscoLwappInterfaceConfig | |||
| 1.3.6.1.4.1.9.9.686.1.1.1 | TableclInterfaceConfigTable | not-accessible | current | This table represents the configuration of all the interfaces, both the static and the dynamic interfaces, on the Wireless LAN Controller(WLC). |
| 1.3.6.1.4.1.9.9.686.1.1.1.1 | RowclInterfaceConfigEntry | not-accessible | current | This represents an entry in the clInterfaceConfigTable. Each entry corresponds to an interface, indicated by clInterfaceName. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.1 | ColumnclInterfaceName | not-accessible | current | This object represents the name of the interface on the controller. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.2 | ColumnclInterfaceWired | read-write | current | This object indicates whether the interface represented by clInterfaceName, will be used for the wireless clients that are connected to the WLC or will be used… |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.3 | ColumnclInterfaceQuarantineVlanId | read-write | current | This object represents the quarantine vlan id of the interface. If the value is zero,then it means the interface is non-quarantine and the client traffic throu… |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.4 | ColumnclInterfaceDhcpOpt82Enabled | read-write | current | This object indicates whether the interface represented by clInterfaceName, has DHCP Option 82 Enabled on it or not. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.5 | ColumnclInterfaceDhcpProxyMode | read-write | current | This object indicates DHCP proxy mode on the interface, which overrides the global DHCP proxy mode. There are three modes as below: * global - use the global D… |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.6 | ColumnclInterfaceMdnsProfileName | read-write | current | This object represents the name of the Mdns profile added on the Interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.7 | ColumnclInterfaceNasId | read-write | current | This object represents the NAS-ID of the interface. NAS-ID string is sent to Radius server by WLC (as radius client) via authentication request, which can be u… |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.8 | ColumnclInterfaceMappingRedPort | read-write | current | This object indicates whether the interface represented by clInterfaceName, has mapping to redundancy port Enabled on it or not. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.9 | ColumnclInterfacePrimaryIPv6AddrType | read-write | current | This represents the ipv6 address type of the interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.10 | ColumnclInterfacePrimaryIPv6Addr | read-write | current | Ipv6 Address of the interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.11 | ColumnclInterfacePrimaryPrefixLen | read-write | current | This object denotes the prefix length for interface Ipv6 address. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.12 | ColumnclInterfacePrimaryIPv6GatewayType | read-write | current | Gateway Address type of the interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.13 | ColumnclInterfacePrimaryIPv6Gateway | read-write | current | Gateway Address of the interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.14 | ColumnclInterfaceIPv6AclName | read-write | current | Name of the IPV6 Access Control List applied to the interface. This attribute is applicable only to the management interface and other dynamic interfaces. If i… |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.15 | ColumnclInterfaceLinkLocalIDType | read-only | current | Link Local Identifier of the interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.16 | ColumnclInterfaceLinkLocalID | read-only | current | Link Local Identifier of the interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.17 | ColumnclInterfaceIPv6SLAAC | read-write | current | This indicates the SLAAC status of the interface. This applies only to the service port interface. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.18 | ColumnclInterfaceLinkSelectEnabled | read-write | current | This object indicates whether the interface represented by clInterfaceName, has DHCP Option 82 Link Select Enabled on it or not. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.19 | ColumnclInterfaceLinkSelectRelaySrcIntf | read-write | current | This object represents the name of the Source Interface for DHCP Opt82 Link Select. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.20 | ColumnclInterfaceVpnSelectEnabled | read-write | current | This object indicates whether the interface represented by clInterfaceName, has DHCP Option 82 Vpn Select Enabled on it or not. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.21 | ColumnclInterfaceVpnSelectVpnId | read-write | current | This object represents the Vpn Id of DHCP Option 82 for Vpn Select, The VPN-ID is sequence of 7 octets, 3 octet VPN authority Organizationally Unique Identifie… |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.22 | ColumnclInterfaceVpnselectVrfName | read-write | current | This object represents the DHCP Opt 82 VrfName for the Vpn Select. |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.23 | ColumnclInterfacePrimaryIpv6AddrStatus | read-only | current | This object represents the Ipv6 Address status |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.24 | ColumnclInterfaceLinkLocalIpv6AddrStatus | read-only | current | This objest represents the Link local Ipv6 Address status |
| 1.3.6.1.4.1.9.9.686.1.1.2 | TableclInterfaceGroupsConfigTable | not-accessible | current | This table is used to maintain the interface groups. An interface group is a logical grouping of interfaces with unique VLAN ids. |
| 1.3.6.1.4.1.9.9.686.1.1.2.1 | RowclInterfaceGroupsConfigEntry | not-accessible | current | This represents an entry in clInterfaceGroupsConfigTable. Entries can be added or deleted by explicit management action by NMS or by user console. |
| 1.3.6.1.4.1.9.9.686.1.1.2.1.1 | ColumnclInterfaceGroupName | not-accessible | current | This object represents the name assigned to identify the interface group. |
| 1.3.6.1.4.1.9.9.686.1.1.2.1.2 | ColumnclInterfaceGroupDescr | read-create | current | This object describes the interface group. |
| 1.3.6.1.4.1.9.9.686.1.1.2.1.3 | ColumnclInterfaceGroupIsQuarantine | read-only | current | This object indicates whether the interface group has quarantine interfaces. A value of 'true' specifies the interface group has quarantine interfaces. A value… |
| 1.3.6.1.4.1.9.9.686.1.1.2.1.4 | ColumnclInterfaceGroupRowStatus | read-create | current | This object is used to add or delete entries in clInterfaceGroupsConfigTable |
| 1.3.6.1.4.1.9.9.686.1.1.2.1.5 | ColumnclInterfaceGroupMdnsProfileName | read-create | current | This object represents the name of the Mdns profile added on the Interface Group. |
| 1.3.6.1.4.1.9.9.686.1.1.2.1.6 | ColumnclInterfaceGroupFailDetectMode | read-write | current | This object indicates the mode of failure detection (dirty interface logic)in the interface group when a client fails to get an ip address from a vlan. 'aggres… |
| 1.3.6.1.4.1.9.9.686.1.1.3 | TableclInterfaceGroupsMappingTable | not-accessible | current | This table represents the mapping between the interface and the interface group. |
| 1.3.6.1.4.1.9.9.686.1.1.3.1 | RowclInterfaceGroupsMappingEntry | not-accessible | current | This represents an entry in clInterfaceGroupsMappingTable Entries can be added or deleted by explicit management action By NMS or by user console . |
| 1.3.6.1.4.1.9.9.686.1.1.3.1.1 | ColumnclInterfaceGroupMappingRowStatus | read-create | current | This object is used to add or delete entries in clInterfaceGroupsMappingTable |
| 1.3.6.1.4.1.9.9.686.1.2 | NodeciscoLwappInterfaceInfo | |||
| 1.3.6.1.4.1.9.9.686.1.2.1 | TablecLInterfaceTable | not-accessible | current | This table represents the information about all the interfaces, both the static and the dynamic interfaces, on the Wireless LAN Controller(WLC). |
| 1.3.6.1.4.1.9.9.686.1.2.1.1 | RowcLInterfaceEntry | not-accessible | current | Each entry in this table provides information about one interface on the WLC. |
| 1.3.6.1.4.1.9.9.686.1.2.1.1.1 | ColumncLInterfacePreviousAddressType | read-only | current | This object represents the previous type of the interface's address on the controller. |
| 1.3.6.1.4.1.9.9.686.1.2.1.1.2 | ColumncLInterfacePreviousAddress | read-only | current | This object represents the previous address of the interface on the controller. |
| 1.3.6.1.4.1.9.9.686.1.2.1.1.3 | ColumncLInterfaceCurrentAddressType | read-only | current | This object represents the current type of the interface's address on the controller. |
| 1.3.6.1.4.1.9.9.686.1.2.1.1.4 | ColumncLInterfaceCurrentAddress | read-only | current | This object represents the current address of the interface on the controller. |
| 1.3.6.1.4.1.9.9.686.2 | NodeciscoLwappInterfaceMIBConform | |||
| 1.3.6.1.4.1.9.9.686.2.1 | NodeciscoLwappInterfaceMIBCompliances | |||
| 1.3.6.1.4.1.9.9.686.2.1.1 | ComplianceciscoLwappInterfaceMIBCompliance | deprecated | The compliance statement for the SNMP entities that implement the ciscoLwappInterfaceMIB module. | |
| 1.3.6.1.4.1.9.9.686.2.1.2 | ComplianceciscoLwappInterfaceMIBComplianceRev01 | deprecated | The compliance statement for the SNMP entities that implement the ciscoLwappInterfaceMIB module. | |
| 1.3.6.1.4.1.9.9.686.2.1.3 | ComplianceciscoLwappInterfaceMIBComplianceRev02 | read-only | current | The compliance statement for the SNMP entities that implement the ciscoLwappInterfaceMIB module. |
| 1.3.6.1.4.1.9.9.686.2.2 | NodeciscoLwappInterfaceMIBGroups | |||
| 1.3.6.1.4.1.9.9.686.2.2.1 | GroupciscoLwappInterfaceConfigGroup | current | This collection of objects represent the configuration of interfaces on the controller. | |
| 1.3.6.1.4.1.9.9.686.2.2.2 | GroupciscoLwappInterfaceGroupConfigSup1 | current | This collection of objects represent the configuration of interface groups on the controller. | |
| 1.3.6.1.4.1.9.9.686.2.2.3 | GroupciscoLwappInterfaceConfigGroupSup1 | current | This collection of objects represent the configuration of interfaces on the controller. |