CISCO-MEMORY-POOL-MIB
34 objects
MIB module for monitoring memory pools
Imported Objects
| CISCO-QOS-PIB-MIB | Percent |
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.48 | IdentityciscoMemoryPoolMIB | MIB module for monitoring memory pools | ||
| 1.3.6.1.4.1.9.9.48.1 | NodeciscoMemoryPoolObjects | |||
| 1.3.6.1.4.1.9.9.48.1.1 | TableciscoMemoryPoolTable | not-accessible | current | A table of memory pool monitoring entries. |
| 1.3.6.1.4.1.9.9.48.1.1.1 | RowciscoMemoryPoolEntry | not-accessible | current | An entry in the memory pool monitoring table. |
| 1.3.6.1.4.1.9.9.48.1.1.1.1 | ColumnciscoMemoryPoolType | not-accessible | current | The type of memory pool for which this entry contains information. |
| 1.3.6.1.4.1.9.9.48.1.1.1.2 | ColumnciscoMemoryPoolName | read-only | current | A textual name assigned to the memory pool. This object is suitable for output to a human operator, and may also be used to distinguish among the various pool … |
| 1.3.6.1.4.1.9.9.48.1.1.1.3 | ColumnciscoMemoryPoolAlternate | read-only | current | Indicates whether or not this memory pool has an alternate pool configured. Alternate pools are used for fallback when the current pool runs out of memory. If … |
| 1.3.6.1.4.1.9.9.48.1.1.1.4 | ColumnciscoMemoryPoolValid | read-only | current | Indicates whether or not the remaining objects in this entry contain accurate data. If an instance of this object has the value false (which in and of itself i… |
| 1.3.6.1.4.1.9.9.48.1.1.1.5 | ColumnciscoMemoryPoolUsed | read-only | current | Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device. |
| 1.3.6.1.4.1.9.9.48.1.1.1.6 | ColumnciscoMemoryPoolFree | read-only | current | Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of ciscoMemoryPoolUsed and ciscoMemoryPoo… |
| 1.3.6.1.4.1.9.9.48.1.1.1.7 | ColumnciscoMemoryPoolLargestFree | read-only | current | Indicates the largest number of contiguous bytes from the memory pool that are currently unused on the managed device. |
| 1.3.6.1.4.1.9.9.48.1.1.1.8 | ColumnciscoMemoryPoolLowMemoryNotifThreshold | read-write | current | This object is used to indicate the threshold value in percentage of free memory remaining in a memory pool. If the free memory available goes below this thres… |
| 1.3.6.1.4.1.9.9.48.1.2 | TableciscoMemoryPoolUtilizationTable | not-accessible | current | A table of memory pool utilization entries. Each of the objects provides a general idea of how much of the memory pool has been used over a given period of tim… |
| 1.3.6.1.4.1.9.9.48.1.2.1 | RowciscoMemoryPoolUtilizationEntry | not-accessible | current | An entry in the memory pool utilization table. |
| 1.3.6.1.4.1.9.9.48.1.2.1.1 | ColumnciscoMemoryPoolUtilization1Min | read-only | current | This is the memory pool utilization for 1 minute. |
| 1.3.6.1.4.1.9.9.48.1.2.1.2 | ColumnciscoMemoryPoolUtilization5Min | read-only | current | This is the memory pool utilization for 5 minutes. |
| 1.3.6.1.4.1.9.9.48.1.2.1.3 | ColumnciscoMemoryPoolUtilization10Min | read-only | current | This is the memory pool utilization for 10 minutes. |
| 1.3.6.1.4.1.9.9.48.1.3 | ScalarciscoMemoryPoolLowMemoryNotifEnable | read-write | current | This object is used to enable or disable the generation of notification when the available memory in the system has fallen below ciscoMemoryPoolLowMemoryNotifT… |
| 1.3.6.1.4.1.9.9.48.2 | NodeciscoMemoryPoolNotifications | |||
| 1.3.6.1.4.1.9.9.48.2.0 | NodeciscoMemoryPoolMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.48.2.0.1 | NotificationciscoMemoryPoolLowMemoryNotif | current | This notification is generated when the percentage of free memory in the system has fallen below ciscoMemoryPoolLowMemoryNotifThreshold and when the value of c… | |
| 1.3.6.1.4.1.9.9.48.2.0.2 | NotificationciscoMemoryPoolLowMemoryRecoveryNotif | current | This notification is generated when the percentage of free memory in the system has returned to ciscoMemoryPoolLowMemoryNotifThreshold after suffering from a l… | |
| 1.3.6.1.4.1.9.9.48.3 | NodeciscoMemoryPoolConformance | |||
| 1.3.6.1.4.1.9.9.48.3.1 | NodeciscoMemoryPoolCompliances | |||
| 1.3.6.1.4.1.9.9.48.3.1.1 | ComplianceciscoMemoryPoolCompliance | deprecated | The compliance statement for entities which implement the Cisco Memory Pool MIB | |
| 1.3.6.1.4.1.9.9.48.3.1.2 | ComplianceciscoMemoryPoolComplianceRev1 | deprecated | The compliance statement for entities which implement the Cisco Memory Pool MIB | |
| 1.3.6.1.4.1.9.9.48.3.1.3 | ComplianceciscoMemoryPoolComplianceRev2 | current | The compliance statement for entities which implement the Cisco Memory Pool MIB | |
| 1.3.6.1.4.1.9.9.48.3.2 | NodeciscoMemoryPoolGroups | |||
| 1.3.6.1.4.1.9.9.48.3.2.1 | GroupciscoMemoryPoolGroup | deprecated | A collection of objects providing memory pool monitoring. | |
| 1.3.6.1.4.1.9.9.48.3.2.2 | GroupciscoMemoryPoolUtilizationGroup | current | An optional group providing a collection of memory pool utilization objects. | |
| 1.3.6.1.4.1.9.9.48.3.2.3 | GroupciscoMemoryPoolNotificationGroup | current | A collection of all the notifications supported in the CISCO-MEMORY-POOL-MIB. | |
| 1.3.6.1.4.1.9.9.48.3.2.4 | GroupciscoMemoryPoolNotificationCtrlGroup | current | A collection of all the notification control objects. | |
| 1.3.6.1.4.1.9.9.48.3.2.5 | GroupciscoMemoryPoolGroupRev1 | current | A collection of objects providing memory pool monitoring. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoMemoryPoolTypes | Integer32 (1..65535) | current | Represents the different types of memory pools that may be present in a managed device. Memory pools can be roughly categorized into two groups, predefined pools and dynamic pools. The following pool types are currently… |