CISCO-MGX82XX-ENVMON-MIB
20 objects
The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products.
Imported Objects
| BASIS-MIB | basisAsm |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.1.2.1 | TableasmAlarmTable | not-accessible | current | The ASM Alarm table. The table size is given by the value of ASMNumOfValidEntries. |
| 1.3.6.1.4.1.351.110.1.2.1.1 | RowasmAlarmEntry | not-accessible | current | An entry in the Basis ASM Alarm Table. |
| 1.3.6.1.4.1.351.110.1.2.1.1.1 | ColumnasmAlarmNum | read-only | current | This object is the identifier of a ASM alarm entry. The Alarm is further identified by the objects ASMAlarmType & ASMAlarmUnitNum. |
| 1.3.6.1.4.1.351.110.1.2.1.1.2 | ColumnasmAlarmType | read-only | current | The value for this object indicates the type of device for which alarm is applicable. The possible values are : alarmOther (1) : Other than specified below ala… |
| 1.3.6.1.4.1.351.110.1.2.1.1.3 | ColumnasmAlarmUnitNum | read-only | current | This object identifies one unit among a number of identical units represented in this table having the same asmAlarmType. |
| 1.3.6.1.4.1.351.110.1.2.1.1.4 | ColumnasmAlarmThreshold | read-only | current | This object specifies the threshold beyond which the alarmable unit is said to be in an abnormal state. |
| 1.3.6.1.4.1.351.110.1.2.1.1.5 | ColumnasmAlarmSeverity | read-only | current | This variable specifies the severity of the alarm to be declared when the asmAlarmThreshold specified is exceeded. |
| 1.3.6.1.4.1.351.110.1.2.1.1.6 | ColumnasmUnitMeasurable | read-only | current | This object indicates if the alarm unit is measurable by the switch/system. |
| 1.3.6.1.4.1.351.110.1.2.1.1.7 | ColumnasmUnitMeasuredValue | read-only | current | This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This … |
| 1.3.6.1.4.1.351.110.1.2.1.1.8 | ColumnasmPhysicalAlarmState | read-only | current | This object indicates the status of the ASM alarm represented in this entry. It is a bitmap where a set bit indicates an abnormal condition. A reset bit signif… |
| 1.3.6.1.4.1.351.110.1.2.1.1.9 | ColumnasmClrButton | read-write | current | This object when set to asmAlarmClear(2),causes the alarm to be cleared. |
| 1.3.6.1.4.1.351.110.1.2.2 | ScalarasmNumOfValidEntries | read-only | current | The number of valid asmAlarmTable entries (regardless of how many are actually configured) in the table. |
| 1.3.6.1.4.1.351.110.1.2.3 | ScalarasmShelfAlarmState | read-only | current | This object indicates whether any Shelf/Node Alarm has been declared in the system. |
| 1.3.6.1.4.1.351.150.70 | IdentityciscoMgx82xxEnvmonMIB | The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products. | ||
| 1.3.6.1.4.1.351.150.70.2 | NodecmEnvmonMIBConformance | |||
| 1.3.6.1.4.1.351.150.70.2.1 | NodecmEnvmonMIBGroups | |||
| 1.3.6.1.4.1.351.150.70.2.1.1 | GroupcmEnvmonInfoGroup | current | The collection of objects which are used for providing information on environmental monitoring devices. | |
| 1.3.6.1.4.1.351.150.70.2.1.2 | GroupcmEnvmonGeneralGroup | current | The collection of objects which are used for providing information on shelf level objects related to environmental monitoring devices. | |
| 1.3.6.1.4.1.351.150.70.2.2 | NodecmEnvmonMIBCompliances | |||
| 1.3.6.1.4.1.351.150.70.2.2.1 | CompliancecmEnvmonCompliance | current | The compliance statement for objects related to MGX82xx Environmental monitoring MIB. |