CISCO-MGX82XX-RPM-CONN-MIB
46 objects
The connection MIB module for RPM(Router Blade) service module in MGX8250/MGX8230 products. The 'channel' and 'connection' and 'connection endpoint' mean same in this MIB.
Imported Objects
| BASIS-MIB | rpmChanGrp |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.10.1.1 | TablerpmChanGrpTable | not-accessible | current | This table contains endpoint configuration information for connections applicable to RPM service module. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1 | RowrpmChanGrpEntry | not-accessible | current | An entry for logical channel. Each entry corresponds to a connection endpoint identified by Slot number and channel number. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.1 | ColumnrpmChanSlotNum | read-only | current | Specifies the slot number of the RPM card. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.2 | ColumnrpmChanInterface | read-only | current | This is the RPM's backplane interface. Currently there is only one interface. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.3 | ColumnrpmChanNum | read-only | current | This object identifies the channel number. This is also called Logical Connection Number(LCN). This is a unique number which identifies a connection. The LCN m… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.4 | ColumnrpmChanRowStatus | read-only | current | This indicates the status of this channel. add(1) : Channel is added. del(2) : channel is deleted. mod(3) : Set to this value before modifying objects related … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.5 | ColumnrpmChanVcd | read-only | current | Virtual Circuit Descriptor. A unique number which identifies a connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.6 | ColumnrpmChanVpi | read-only | current | The VPI value for this channel. For VPC, VPI range is 1..255 and LCN range is 3841..4095. LCN = VPI + 3840 |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.7 | ColumnrpmChanVci | read-only | current | The VCI value for this channel. For VCC, VCI range is 1..3825, and LCN range is 16..3840. LCN = VCI + 16. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.8 | ColumnrpmChanSubInterface | read-only | current | This is the RPM's backplane sub-interface. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.9 | ColumnrpmChanLocalVpi | read-only | current | This VPI together with the local VCI and NSAP represents the local end point in this connection. The VPI value is zero for rpmChanConnType value of vcc(2). |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.10 | ColumnrpmChanLocalVci | read-only | current | This VCI together with the local VPI and NSAP represents the local end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.11 | ColumnrpmChanLocalNsap | read-only | current | This object identifies the local NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved : 2 bytes Slot/Port : 2 bytes[5 b… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.12 | ColumnrpmChanRemoteVpi | read-only | current | This VPI together with the remote VCI and NSAP represents the remote end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.13 | ColumnrpmChanRemoteVci | read-only | current | This VCI together with the remote VPI and NSAP represents the remote end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.14 | ColumnrpmChanRemoteNsap | read-only | current | This object identifies the remote NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved : 2 bytes Slot/Port : 2 bytes[5 … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.15 | ColumnrpmChanType | read-only | current | This object identifies the channel type svc(1) : Switched Virtual Connection pvc(2) : Permanent Virtual Connection spvc(3) : Soft PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.16 | ColumnrpmChanConnType | read-only | current | This specifies the connection type vpc(1) : Virtual Path Connection vcc(1) : Virtual Channel Connection |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.17 | ColumnrpmChanServiceType | read-only | current | This object identifies the connection service type. cbr (1) : Constant Bit Rate vbr (2) : Variable Bit Rate ubr (4) : Unspecified Bit Rate atfr (5) : ATM Frame… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.18 | ColumnrpmChanMastership | read-only | current | This specifies which end of the connection is the master. This is used by PXM to determine if this end point is master or slave. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.19 | ColumnrpmChanRtePriority | read-only | current | This is also known as class of service, it is used by PXM to determine how important this connection is when selecting connections to route. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.20 | ColumnrpmChanMaxCost | read-only | current | Maximum allowed cost. It is related to Cost Based Routing. This is used by PXM so that it won't choose a path with a cost greater than this configured level. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.21 | ColumnrpmChanRestrictTrkType | read-only | current | Restricted trunk type for routing, used by PXM. It specifies that the connection either cannot be routed over satellite trunks or terrestrial trunks, or it can… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.22 | ColumnrpmChanPCR | read-only | current | Peak cell rate.(in cells per sec.) |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.23 | ColumnrpmChanRemotePCR | read-only | current | Peak cell rate of the remote endpoint of the connection. If not set, its value will be same as the value of rpmChanPCR. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.24 | ColumnrpmChanMCR | read-only | current | Minimum cell rate.(in cells per sec.). |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.25 | ColumnrpmChanRemoteMCR | read-only | current | Minimum cell rate of the remote endpoint. If this is not set, its value will be same as value of rpmChanMCR. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.26 | ColumnrpmChanPercentUtil | read-only | current | This is the expected long-term utilization of the channel by this end-point. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.27 | ColumnrpmChanRemotePercentUtil | read-only | current | This is the expected long-term utilization of the channel by the other end-point. If this is not specified in the connection setup request, it'll be set to be … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.28 | ColumnrpmChanEncapType | read-only | current | This object identifies the ATM adaptation layer (AAL) and Encapsulation type. aal5snap - LLC/SNAP precedes the protocol datagram. aal34smds - Encapsulation for… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.29 | ColumnrpmChanMidLow | read-only | current | Starting Message Identifier Number for this PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.30 | ColumnrpmChanMidHigh | read-only | current | Ending Message Identifier Number for this PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.31 | ColumnrpmChanBurstSize | read-only | current | The Maximum number of ATM cells the virtual circuit can transmit. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.32 | ColumnrpmChanInArpFreq | read-only | current | Specifies how often Inverse ARP datagrams will be sent on this virtual circuit. The value zero will disable the IN-ARP for this channel. This object is support… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.33 | ColumnrpmChanOAMloopback | read-only | current | This object specifies how often to generate an OAM F5 loopback cell from this virtual circuit. The value zero will disable generation of OAM F5 loopback cells. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.34 | ColumnrpmChanState | read-only | current | This indicates the status of this channel. 1 ==> notConfigured 2 ==> active 3 ==> failed. Currently 'failed' state is not supported. When the channel is not ad… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.35 | ColumnrpmChanVirtualTemplate | read-only | current | Specifies the Virtual Template used for CISCO PPP. If it is not using Virtual Template then this value is zero. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.36 | ColumnrpmChanAbrRDF | read-only | current | This is valid only for ABR Service Type. Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1 are received. Larger va… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.37 | ColumnrpmChanAbrRIF | read-only | current | This is valid only for ABR Service Type. Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is received with CI=0 and NI=0. … |
| 1.3.6.1.4.1.351.150.62 | IdentityciscoMgx82xxRpmConnMIB | The connection MIB module for RPM(Router Blade) service module in MGX8250/MGX8230 products. The 'channel' and 'connection' and 'connection endpoint' mean same … | ||
| 1.3.6.1.4.1.351.150.62.2 | NodecmrConnMIBConformance | |||
| 1.3.6.1.4.1.351.150.62.2.1 | NodecmrConnMIBCompliances | |||
| 1.3.6.1.4.1.351.150.62.2.1.1 | CompliancecmrConnMIBCompliance | current | The compliance statement for the Cisco MGX RPM connection management group. | |
| 1.3.6.1.4.1.351.150.62.2.2 | NodecmrConnMIBGroups | |||
| 1.3.6.1.4.1.351.150.62.2.2.1 | GroupcmrConnConfGroup | current | The objects related to Connections on RPM card. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RpmNsapAddress | OCTET STRING (SIZE(20)) | current | ATM address used by the networking entity. The only address type presently supported is NSAP (20 octets) |