CISCO-MGX82XX-RPM-SUBIF-MIB
15 objects
This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the MGX controller to manage the RPM. The RPM family of Router Modules run the IOS Operating System
Imported Objects
| BASIS-MIB | rpmPort |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.9.1.1 | TablerpmPortTable | not-accessible | current | This table contains information on subinterfaces configured on RPM back plane interface. |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1 | RowrpmPortEntry | not-accessible | current | An entry for the RPM backplane sub interface. Each entry contains RPM's backplane sub interface number, its IP address and ATM address. |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.1 | ColumnrpmPortSlotNum | read-only | current | This object specifies the the slot number of the RPM card in MGX shelf. |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.2 | ColumnrpmPortInterface | read-only | current | This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1. |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.3 | ColumnrpmPortSubInterface | read-only | current | This object identifies the sub-interface number. The value 0 is for the sub-interface on the main interface(rpmPortInterface). |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.4 | ColumnrpmPortRowStatus | read-only | current | This indicates the status of this subinterface. add(1) : sub-interface is added. del(2) : sub-interface is deleted. mod(3) : Set to this value before modifying… |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.5 | ColumnrpmPortIpAddress | read-only | current | IP address configured on the sub-interface. |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.6 | ColumnrpmPortSubNetMask | read-only | current | The subnet mask configured on the sub-interface. |
| 1.3.6.1.4.1.351.110.5.2.9.1.1.1.7 | ColumnrpmPortState | read-only | current | This indicates the state of this sub-interface. notConfigured(1) : Sub-interface is not configured. active(2) : Sub-interface is in active state. failed(3) : S… |
| 1.3.6.1.4.1.351.150.60 | IdentityciscoMgx82xxRpmSubIfMIB | This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the MGX controller to manage the R… | ||
| 1.3.6.1.4.1.351.150.60.2 | NodecmrSubIfMIBConformance | |||
| 1.3.6.1.4.1.351.150.60.2.1 | NodecmrSubIfMIBCompliances | |||
| 1.3.6.1.4.1.351.150.60.2.1.1 | CompliancecmrSubIfMIBCompliance | current | The compliance statement for the Cisco MGX RPM sub-interface MIB. | |
| 1.3.6.1.4.1.351.150.60.2.2 | NodecmrSubIfMIBGroups | |||
| 1.3.6.1.4.1.351.150.60.2.2.1 | GroupcmrSubIfMIBGroup | current | Objects related to ATM Subinterface in RPM module. |