CISCO-MGX82XX-VIRTUAL-PORT-MIB
58 objects
The MIB module for configuration ond reporting statistics of virtual ports in PXM1 Service module in MGX82xx series.
Imported Objects
| BASIS-MIB | virtualInterface |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.8.1 | NodevirtualInterfaceCnf | |||
| 1.3.6.1.4.1.351.110.5.2.8.1.1 | TablevrtlIntrConfigTable | not-accessible | current | Virtual Interface Configuration Table. |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1 | RowvrtlIntrConfigEntry | not-accessible | current | An entry in the Virtual Interface configuration Table. |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.1 | ColumnconfigVrtlIntrNum | read-only | current | Virtual Interface Number. There are totaly. 32 Virtual Interfaces on the card (egress). |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.2 | ColumnvrtlIntrPortNum | read-write | current | Port number which will be connected to the Virtual Interface. Value zero meens that this virtual interface is not connected to any port. |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.3 | ColumnvrtlIntrState | read-write | current | Virtual Interface State. |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.4 | ColumnvrtlIntrMaxQueMem | read-write | current | Virtual Interface's Max queue memory. 1 = 4Kcells 2 = 8Kcells 3 = 16Kcells 4 = 32Kcells 5 = 64Kcells 6 = 128Kcells 7 = 256Kcells 8 = 512Kcells. |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.5 | ColumnvrtlIntrMinCellRate | read-write | current | Virtual Interface's minimum cell rate. The default value: for OC12 port is 1412832 cells/sec for OC3 port is 353208 cells/sec for T3 port is 96000 cells/sec fo… |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.6 | ColumnvrtlIntrMaxCellRate | read-write | current | Virtual Interface's maximum cell rate. The default value: for OC12 port is 1412832 cells/sec for OC3 port is 353208 cells/sec for T3 port is 96000 cells/sec fo… |
| 1.3.6.1.4.1.351.110.5.2.8.1.1.1.7 | ColumnvrtlIntrCurrConfigPaths | read-only | current | This is not a configurable parameter. This gives the count of paths currently configured on this virtual interface. |
| 1.3.6.1.4.1.351.110.5.2.8.2 | NodevirtualInterfaceCnt | |||
| 1.3.6.1.4.1.351.110.5.2.8.2.1 | TablevrtlIntrCounterTable | not-accessible | current | Virtual Interface Counter32s Table. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1 | RowvrtlIntrCounterEntry | not-accessible | current | An entry in the Virtual Interface Counter32 Table. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.1 | ColumncountVrtlIntrNum | read-only | current | Virtual Interface Number. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.2 | ColumnvrtlIntrTotalCellCnt | read-only | current | Total number of cells (VC plus Qbin) that belong to this Virtual Interface. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.3 | ColumnvrtlIntrTotalQbinCellCnt | read-only | current | Total number of cells in the Qbin belonging to this Virtual Interface. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.4 | ColumnvrtlIntrRxdValidOAMCellCnt | read-only | current | Total number of OAM cell received. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.5 | ColumnvrtlIntrRxdRmCellCnt | read-only | current | Total number of RM cells Received. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.6 | ColumnvrtlIntrRxdClpUntaggedCellCnt | read-only | current | Total number of CLP-0 cells Received. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.7 | ColumnvrtlIntrRxdClpTaggedCellCnt | read-only | current | Total number of CLP-1 cells Received. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.8 | ColumnvrtlIntrRxdClpUntaggedDiscardedCellCnt | read-only | current | Total number of CLP-0 cells discarded at Ingress. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.9 | ColumnvrtlIntrRxdClpTaggedDiscardedCellCnt | read-only | current | Total number of CLP-1 cells discarded at Ingress. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.10 | ColumnvrtlIntrXmtdOAMCellCnt | read-only | current | Total number of OAM cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.11 | ColumnvrtlIntrXmtdRmCellCnt | read-only | current | Total number of RM(Resource Monitoring) cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.12 | ColumnvrtlIntrXmtdClpUntaggedCellCnt | read-only | current | Total number of CLP-0 cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.8.2.1.1.13 | ColumnvrtlIntrXmtdClpTaggedCellCnt | read-only | current | Total number of CLP-1 cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.8.3 | NodevirtualInterfaceQbinCnf | |||
| 1.3.6.1.4.1.351.110.5.2.8.3.1 | TablevrtlIntrQbinConfigTable | not-accessible | current | Virtual Interface QBin Configuration Table. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1 | RowvrtlIntrQbinConfigEntry | not-accessible | current | An entry in the Virtual Interface Qbin Config Table. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.1 | ColumnqueConfigVrtlIntrNum | read-only | current | Virtual Interface Number. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.2 | ColumnqueConfigVrtlIntrQbinNum | read-only | current | Virtual Interface Qbin Number. There are totaly 16 Qbin per Virtual Interface. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.3 | ColumnvrtlIntrQbinState | read-write | current | Virtual Interface QBIN state. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.4 | ColumnvrtlIntrQbinPri | read-write | current | This indicates the priority of the QBIN service within the Virtual Interface. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.5 | ColumnvrtlIntrQbinRate | read-write | current | The rate at which cells in the QBIN are serviced. Max Cell rate for OC3 interface is 353208 cell/sec. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.6 | ColumnvrtlIntrQbinDiscardSelection | read-write | current | Virtual Interface QBin Congestion control option. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.7 | ColumnvrtlIntrQbinMaxThreshold | read-write | current | Max cells that can be queued in the QBIN. The Get value will be different from the Set value because of FW internal round up. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.8 | ColumnvrtlIntrQbinClpHiThreshold | read-write | current | The threshold above which the tagged cells will be dropped. The Get value will be different from the Set value because of FW internal round up. |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.9 | ColumnvrtlIntrQbinClpLoThreshold | read-write | current | Valid only if congestion control is set to CLP hysterises. The threshold upto which the dropping of the tagged cells should continue once it has crossed CLP HI… |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.10 | ColumnvrtlIntrQbinFrameDiscardThreshold | read-write | current | Valid only if congestion control is set to Frame Discard. It is the threshold after which the QE will start discarding the entire frame if one or more cells of… |
| 1.3.6.1.4.1.351.110.5.2.8.3.1.1.11 | ColumnvrtlIntrQbinEfciThreshold | read-write | current | The threshold above which the EFCI bits of the cell is set. The Get value will be different from the Set value because of FW internal round up. |
| 1.3.6.1.4.1.351.110.5.2.8.4 | NodevirtualInterfaceQbinCnt | |||
| 1.3.6.1.4.1.351.110.5.2.8.4.1 | TablevrtlIntrQbinCounterTable | not-accessible | current | Virtual Interface QBin Counter Table. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1 | RowvrtlIntrQbinCounterEntry | not-accessible | current | An entry in the Virtual Interface Qbin Counter Table. Each entry contains information on the statistics supported for an interface. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1.1 | ColumnqueConuterVrtlIntrNum | read-only | current | Virtual Interface Number. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1.2 | ColumnqueCounterVrtlIntrQbinNum | read-only | current | Virtual Interface Qbin Number. There are totaly 16 Qbin per Virtual Interface. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1.3 | ColumnvrtlIntrQbinCurrentCellCnt | read-only | current | Total number of cells currently in the Qbin. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1.4 | ColumnvrtlIntrQbinRxdCellCnt | read-only | current | Total number of cells arrived to the QBIN. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1.5 | ColumnvrtlIntrQbinTxdCellCnt | read-only | current | Total number of cells departured from QBIN. |
| 1.3.6.1.4.1.351.110.5.2.8.4.1.1.6 | ColumnvrtlIntrQbinDiscardedCellCnt | read-only | current | Total number of arrivals to QBIN which were discarded. |
| 1.3.6.1.4.1.351.150.38 | IdentityciscoMgx82xxVirtualPortMIB | The MIB module for configuration ond reporting statistics of virtual ports in PXM1 Service module in MGX82xx series. | ||
| 1.3.6.1.4.1.351.150.38.2 | NodecmvPortMIBConformance | |||
| 1.3.6.1.4.1.351.150.38.2.1 | NodecmvPortMIBGroups | |||
| 1.3.6.1.4.1.351.150.38.2.1.1 | GroupcmvPortConfGroup | current | The collection of objects which are used for configuring Virtual Ports in PXM1 service module. | |
| 1.3.6.1.4.1.351.150.38.2.1.2 | GroupcmvPortStatsGroup | current | The collection of objects related to statistics for Virtual Ports in PXM1 service module. | |
| 1.3.6.1.4.1.351.150.38.2.1.3 | GroupcmvPortQbinConfGroup | current | The collection of objects related to configuration of Qbin related things in PXM1 service module. | |
| 1.3.6.1.4.1.351.150.38.2.1.4 | GroupcmvPortQbinStatsGroup | current | The collection of objects related to statistics for Qbin related things in PXM1 service module. | |
| 1.3.6.1.4.1.351.150.38.2.2 | NodecmvPortMIBCompliances | |||
| 1.3.6.1.4.1.351.150.38.2.2.1 | CompliancecmvPortCompliance | current | The compliance statement for objects related to SRM MIB. |