CISCO-MODEM-MGMT-MIB
102 objects
This MIB module provides modem call related data for tracking the progress and status of a call.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.47 | IdentityciscoModemMgmtMIB | This MIB module provides modem call related data for tracking the progress and status of a call. | ||
| 1.3.6.1.4.1.9.9.47.1 | NodeciscoModemMgmtMIBObjects | |||
| 1.3.6.1.4.1.9.9.47.1.1 | NodecmSystemInfo | |||
| 1.3.6.1.4.1.9.9.47.1.1.1 | ScalarcmSystemInstalledModem | read-only | current | The actual number of modems that are currently installed within this system. |
| 1.3.6.1.4.1.9.9.47.1.1.2 | ScalarcmSystemConfiguredGroup | read-only | current | The actual number of modem groups that are currently configured within this system. Maximum value for this object is cmSystemInstalledModem. |
| 1.3.6.1.4.1.9.9.47.1.1.3 | ScalarcmSystemWatchdogTime | read-write | current | A passive software watchdog timer value will be used to recover a modem which enters into an unexpected state and hangs. When this watch dog timer times out, t… |
| 1.3.6.1.4.1.9.9.47.1.1.4 | ScalarcmSystemStatusPollTime | read-write | current | The ideal time interval between modem status polling via the out of band management port. |
| 1.3.6.1.4.1.9.9.47.1.1.5 | ScalarcmSystemMaxRetries | read-write | current | A reply event is expected to be received for every message sent to the modem through the out of band management port. If an expected reply event is not receive… |
| 1.3.6.1.4.1.9.9.47.1.1.6 | ScalarcmSystemModemsInUse | read-only | current | The number of modems in the system that are in the following states: connected, offHook, loopback, or downloadFirmware. |
| 1.3.6.1.4.1.9.9.47.1.1.7 | ScalarcmSystemModemsAvailable | read-only | current | The number of modems in the system that are onHook. That is, they are ready to accept a call. |
| 1.3.6.1.4.1.9.9.47.1.1.8 | ScalarcmSystemModemsUnavailable | read-only | current | The number of modems in the system that cannot accept calls. They are in a state other than onHook. |
| 1.3.6.1.4.1.9.9.47.1.1.9 | ScalarcmSystemModemsOffline | read-only | current | The number of modems in the system, which have been held administratively offline |
| 1.3.6.1.4.1.9.9.47.1.1.10 | ScalarcmSystemModemsDead | read-only | current | The number of modems in the system with the state bad or downloadFirmwareFailed. |
| 1.3.6.1.4.1.9.9.47.1.2 | NodecmGroupInfo | |||
| 1.3.6.1.4.1.9.9.47.1.2.1 | TablecmGroupTable | not-accessible | current | Table of descriptive and status information about the groups of modems. |
| 1.3.6.1.4.1.9.9.47.1.2.1.1 | RowcmGroupEntry | not-accessible | current | An entry in the table, containing information about a single group of modems. |
| 1.3.6.1.4.1.9.9.47.1.2.1.1.1 | ColumncmGroupIndex | not-accessible | current | This object identifies the group containing the modems for which this entry contains information. |
| 1.3.6.1.4.1.9.9.47.1.2.1.1.2 | ColumncmGroupTotalDevices | read-only | current | The total number of modem devices which are configured in the group. |
| 1.3.6.1.4.1.9.9.47.1.2.2 | TablecmGroupMemberTable | not-accessible | current | Table of information about the modem members in modem groups. |
| 1.3.6.1.4.1.9.9.47.1.2.2.1 | RowcmGroupMemberEntry | not-accessible | current | An entry in the table, containing information about modem members in a group. The modem groups are currently created when an associated Async interface groups … |
| 1.3.6.1.4.1.9.9.47.1.2.2.1.1 | ColumncmSlotIndex | not-accessible | current | The modem feature card slot number in the group. |
| 1.3.6.1.4.1.9.9.47.1.2.2.1.2 | ColumncmPortIndex | read-only | current | The modem port number of a modem feature card in the group. |
| 1.3.6.1.4.1.9.9.47.1.3 | NodecmLineInfo | |||
| 1.3.6.1.4.1.9.9.47.1.3.1 | TablecmLineStatusTable | not-accessible | current | A collection of objects that describe the status of the modem. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1 | RowcmLineStatusEntry | not-accessible | current | An entry in the table, containing status information about a single modem. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.1 | ColumncmInterface | read-only | current | The interface that this modem is connected. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.2 | ColumncmGroup | read-only | current | The modem group number that the modem may be in. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.3 | ColumncmManufacturerID | read-only | current | A textual description to identify the modem, including the manufacturer's name and type of modem. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.4 | ColumncmProductDetails | read-only | current | A textual description of the modem, including hardware revision number, firmware revision number, feature set and optionally, its serial number. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.5 | ColumncmManageable | read-only | current | The Manageable modem allows to be accessed through the out of band management port in which the modem statistic data can be retrieved, and the Direct Connect s… |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.6 | ColumncmState | read-only | current | Indicates the current state of modem. The meaning of each state code is explained below: unknown: the current state of the modem is unknown. onHook: the condit… |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.7 | ColumncmCallDirection | read-only | current | The modem can be used either as an incoming call or outgoing call. This object specifies the direction of the current or previous call. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.8 | ColumncmDisconnectReason | read-only | current | Indicates the reason that the last connection or call attempt disconnected. The meaning of each reason code is explained below: unknown: the failure reason is … |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.9 | ColumncmCallDuration | read-only | current | This object specifies the call duration of the current or previous call. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.10 | ColumncmCallPhoneNumber | read-only | current | The dialed outgoing telephone number of the current or previous call. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.11 | ColumncmCallerID | read-only | current | The incoming caller identification of the current or previous call if this entry is not in the connected state. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.12 | ColumncmModulationSchemeUsed | read-only | current | The modem modulation scheme used in the current or previous call. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.13 | ColumncmProtocolUsed | read-only | current | The modem protocol used in the current or previous call. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.14 | ColumncmTXRate | read-only | current | The speed of modem transmit rate of the current or previous call in bits per second. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.15 | ColumncmRXRate | read-only | current | The speed of modem receive rate of the current or previous call in bits per second. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.16 | ColumncmTXAnalogSignalLevel | read-only | current | The modem transmit analog signal level in the current or previous call. The unit used is in dBm. This object is valid for modems that have cmManageable set to … |
| 1.3.6.1.4.1.9.9.47.1.3.1.1.17 | ColumncmRXAnalogSignalLevel | read-only | current | The modem transmit analog signal level in the current or previous call. The unit used is in dBm. This object is valid for modems that have cmManageable set to … |
| 1.3.6.1.4.1.9.9.47.1.3.2 | TablecmLineConfigTable | not-accessible | current | A collection of objects that describe some of the configuration info of the modem. |
| 1.3.6.1.4.1.9.9.47.1.3.2.1 | RowcmLineConfigEntry | not-accessible | current | An entry in the table, containing configuration information about a single modem. |
| 1.3.6.1.4.1.9.9.47.1.3.2.1.1 | ColumncmATModePermit | read-write | current | Direct Connect session is used for test and debugging purpose by using the modem AT commands through the out of band management port when cmManageable is true.… |
| 1.3.6.1.4.1.9.9.47.1.3.2.1.2 | ColumncmStatusPolling | read-write | current | Modem status and events can be polled through the out of band management port when the cmManageable is true. This object specifies whether this status polling … |
| 1.3.6.1.4.1.9.9.47.1.3.2.1.3 | ColumncmBusyOutRequest | read-write | current | This object is used to put modem out of service, i.e. modem cannot make calls or answer calls. If the modem to be busyout is handling a call, the busyout actio… |
| 1.3.6.1.4.1.9.9.47.1.3.2.1.4 | ColumncmShutdown | read-write | current | This object is used to put modem out of service, i.e. modem cannot make calls or answer calls. This is a hard busyout command to bring the modem out of service… |
| 1.3.6.1.4.1.9.9.47.1.3.2.1.5 | ColumncmHoldReset | read-write | current | A command hold-reset will put the state of modem into reset mode until an inverse command to bring modem out of RESET mode. During the period of reset mode, th… |
| 1.3.6.1.4.1.9.9.47.1.3.2.1.6 | ColumncmBad | read-write | current | This object can hold modem out of service and marks the modem as suspected or proven to be bad. During the router start-up initialization sequence, modem back-… |
| 1.3.6.1.4.1.9.9.47.1.3.3 | TablecmLineStatisticsTable | not-accessible | current | A collection of objects that describe the status of the modem. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1 | RowcmLineStatisticsEntry | not-accessible | current | An entry in the table, containing status information about a single modem. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.1 | ColumncmRingNoAnswers | read-only | current | A counter to count the calls that ringing was detected but the call was not answered at this modem. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.2 | ColumncmIncomingConnectionFailures | read-only | current | A counter that indicates the number of incoming connection requests that this modem answered in which it could not train with the other DCE. This object is val… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.3 | ColumncmIncomingConnectionCompletions | read-only | current | A counter that indicates the number of incoming connection requests that this modem answered and successfully trained with the other DCE. This object is valid … |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.4 | ColumncmOutgoingConnectionFailures | read-only | current | A counter that indicates the number of outgoing calls from this modem which successfully went off hook and dialed, in which it could not train with the other D… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.5 | ColumncmOutgoingConnectionCompletions | read-only | current | A counter that indicates the number of outgoing calls from this modem which resulted in successfully training with the other DCE.This object is valid only for … |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.6 | ColumncmFailedDialAttempts | read-only | current | A counter that indicates the number of call attempts that failed because the modem didn't go off hook, or there was no dial tone. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.7 | ColumncmNoDialTones | read-only | current | A counter that indicates the number of times the dial tone expected but not received. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.8 | ColumncmDialTimeouts | read-only | current | A counter that indicates the number of times the dial time-out occurred. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.9 | ColumncmWatchdogTimeouts | read-only | current | The number of times the Call Processing watchdog timer has expired. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.10 | Columncm2400OrLessConnections | read-only | deprecated | The number of connections initially established at a modulation speed of 2400 bits per second or less. This object is valid only for modems which have cmManage… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.11 | Columncm2400To14400Connections | read-only | deprecated | The number of connections initially established at a modulation speed of greater than 2400 bits per second and less than 14400 bits per second. This object is … |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.12 | ColumncmGreaterThan14400Connections | read-only | deprecated | The number of connections initially established at a modulation speed of greater than 14400 bits per second. This object is valid only for modems which have cm… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.13 | ColumncmNoCarriers | read-only | current | A counter that indicates the number of times that the disconnect reason is no carrier. This object is valid only for modems which have cmManageable to be true. |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.14 | ColumncmLinkFailures | read-only | current | A counter that indicates the number of times that the disconnect reason is link failure. This object is valid only for modems which have cmManageable to be tru… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.15 | ColumncmProtocolErrors | read-only | current | A counter that indicates the number of times that the out of band protocol error occurred. This object is valid only for modems which have cmManageable to be t… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.16 | ColumncmPollingTimeouts | read-only | current | A counter that indicates the number of times that the out of band protocol time-out error occurred. This object is valid only for modems which have cmManageabl… |
| 1.3.6.1.4.1.9.9.47.1.3.3.1.17 | ColumncmTotalCallDuration | read-only | current | A counter that indicates total call duration on the modem. This includes the duration of all previous calls. |
| 1.3.6.1.4.1.9.9.47.1.3.4 | TablecmLineSpeedStatisticsTable | not-accessible | current | A collection of objects that describe the intial modem line speeds and connections |
| 1.3.6.1.4.1.9.9.47.1.3.4.1 | RowcmLineSpeedStatisticsEntry | not-accessible | current | An entry in the table, containing initial speed and connection information about a single modem. |
| 1.3.6.1.4.1.9.9.47.1.3.4.1.1 | ColumncmInitialLineSpeed | not-accessible | current | A discrete initial speed at which the given line may operate |
| 1.3.6.1.4.1.9.9.47.1.3.4.1.2 | ColumncmInitialLineConnections | read-only | deprecated | The number of connections initially established at a given modulation speed. An instance of this object will be only present for those speeds where one or more… |
| 1.3.6.1.4.1.9.9.47.1.3.4.1.3 | ColumncmInitialTxLineConnections | read-only | current | The number of Transmit connections initially established at a given modulation speed. An instance of this object will be only present for those speeds where on… |
| 1.3.6.1.4.1.9.9.47.1.3.4.1.4 | ColumncmInitialRxLineConnections | read-only | current | The number of Receive connections initially established at a given modulation speed. An instance of this object will be only present for those speeds where one… |
| 1.3.6.1.4.1.9.9.47.1.4 | NodecmNotificationConfig | |||
| 1.3.6.1.4.1.9.9.47.1.4.1 | ScalarcmStateNotifyEnable | read-write | current | This variable controls generation of the cmStateNotification. When this variable is 'true(1)', generation of cmStateNotification is enabled. When this variable… |
| 1.3.6.1.4.1.9.9.47.2 | NodecmMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.47.2.0 | NodecmMIBNotifications | |||
| 1.3.6.1.4.1.9.9.47.2.0.1 | NotificationcmStateNotification | current | A modem port state change notification is generated whenever the port transitions to a state where it is offline due to a failure or administrative action. The… | |
| 1.3.6.1.4.1.9.9.47.3 | NodeciscoModemMgmtMIBConformance | |||
| 1.3.6.1.4.1.9.9.47.3.1 | NodeciscoModemMgmtMIBCompliances | |||
| 1.3.6.1.4.1.9.9.47.3.1.1 | ComplianceciscoModemMgmtMIBCompliance | obsolete | The compliance statement for entities which implement the cisco Modem Management MIB | |
| 1.3.6.1.4.1.9.9.47.3.1.2 | ComplianceciscoModemMgmtMIBComplianceRev1 | obsolete | The compliance statement for entities which implement the cisco Modem Management MIB | |
| 1.3.6.1.4.1.9.9.47.3.1.3 | ComplianceciscoModemMgmtMIBComplianceRev2 | read-only | obsolete | The compliance statement for entities which implement the cisco Modem Management MIB |
| 1.3.6.1.4.1.9.9.47.3.1.4 | ComplianceciscoModemMgmtMIBComplianceRev3 | read-only | obsolete | The compliance statement for entities which implement the cisco Modem Management MIB |
| 1.3.6.1.4.1.9.9.47.3.1.5 | ComplianceciscoModemMgmtMIBComplianceRev4 | not-accessible | obsolete | The compliance statement for entities which implement the cisco Modem Management MIB |
| 1.3.6.1.4.1.9.9.47.3.1.6 | ComplianceciscoModemMgmtMIBComplianceRev5 | not-accessible | deprecated | The compliance statement for entities which implement the cisco Modem Management MIB |
| 1.3.6.1.4.1.9.9.47.3.1.7 | ComplianceciscoModemMgmtMIBComplianceRev6 | not-accessible | current | The compliance statement for entities which implement the cisco Modem Management MIB |
| 1.3.6.1.4.1.9.9.47.3.2 | NodeciscoModemMgmtMIBGroups | |||
| 1.3.6.1.4.1.9.9.47.3.2.1 | GroupcmSystemInfoGroup | obsolete | A collection of objects providing system configuration and status information. | |
| 1.3.6.1.4.1.9.9.47.3.2.2 | GroupcmGroupInfoGroup | current | A collection of objects providing modem configuration and statistics information for modem groups. | |
| 1.3.6.1.4.1.9.9.47.3.2.3 | GroupcmLineInfoGroup | current | A collection of objects providing modem configuration and statistics information for individual modem. | |
| 1.3.6.1.4.1.9.9.47.3.2.4 | GroupcmManagedLineInfoGroup | deprecated | A collection of objects providing modem configuration and statistics information for individual managed modems. | |
| 1.3.6.1.4.1.9.9.47.3.2.5 | GroupcmLineSpeedInfoGroup | obsolete | A collection of objects providing modem configuration and statistics information for individual managed modems. | |
| 1.3.6.1.4.1.9.9.47.3.2.6 | GroupcmSystemInfoGroupRev1 | current | A collection of objects providing system configuration and status information. | |
| 1.3.6.1.4.1.9.9.47.3.2.7 | GroupcmLineSpeedInfoGroupRev1 | deprecated | A collection of objects providing modem configuration and statistics information for individual managed modems. | |
| 1.3.6.1.4.1.9.9.47.3.2.8 | GroupcmManagedLineInfoGroupRev1 | deprecated | A collection of objects providing modem configuration and statistics information for individual managed modems. | |
| 1.3.6.1.4.1.9.9.47.3.2.9 | GroupcmNotificationConfigGroup | current | Objects for configuring the notification behavior of this MIB. | |
| 1.3.6.1.4.1.9.9.47.3.2.10 | GroupcmNotificationGroup | current | The collection of notifications used for monitoring modem status | |
| 1.3.6.1.4.1.9.9.47.3.2.11 | GroupcmLineSpeedInfoGroupRev2 | current | A collection of objects providing modem configuration and statistics information for individual managed modems. | |
| 1.3.6.1.4.1.9.9.47.3.2.12 | GroupcmManagedLineInfoGroupRev2 | current | A collection of objects providing modem configuration and statistics information for individual managed modems. |