CISCO-MVPN-MIB
87 objects
This MIB contains managed object definitions for Cisco implementation of multicast in VPNs defined by the Internet draft: draft-rosen-vpn-mcast-05.txt. Note that this MIB works along with the L3VPN-MPLS-VPN-MIB.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-VPN-MIB | MplsVpnRouteDistinguisher mplsVpnVrfName |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.113 | IdentityciscoMvpnMIB | This MIB contains managed object definitions for Cisco implementation of multicast in VPNs defined by the Internet draft: draft-rosen-vpn-mcast-05.txt. Note th… | ||
| 1.3.6.1.4.1.9.10.113.0 | NodeciscoMvpnNotifications | |||
| 1.3.6.1.4.1.9.10.113.0.2 | NotificationciscoMvpnMvrfChange | current | A ciscoMvpnMvrfChange notification signifies a change about a MVRF in the device. The change event can be creation of the MVRF, deletion of the MVRF or an upda… | |
| 1.3.6.1.4.1.9.10.113.1 | NodeciscoMvpnObjects | |||
| 1.3.6.1.4.1.9.10.113.1.1 | NodeciscoMvpnScalars | |||
| 1.3.6.1.4.1.9.10.113.1.1.1 | ScalarciscoMvpnMvrfNumber | read-only | current | The number of MVRFs that are present in this device. |
| 1.3.6.1.4.1.9.10.113.1.1.2 | ScalarciscoMvpnNotificationEnable | read-write | current | If this object is TRUE, then the generation of all notifications defined in this MIB is enabled. |
| 1.3.6.1.4.1.9.10.113.1.2 | NodeciscoMvpnGeneric | |||
| 1.3.6.1.4.1.9.10.113.1.2.1 | TableciscoMvpnGenericTable | not-accessible | current | This table gives the generic information about the MVRFs present in this device. |
| 1.3.6.1.4.1.9.10.113.1.2.1.1 | RowciscoMvpnGenericEntry | not-accessible | current | An entry in this table is created for every MVRF in the device. Note that many implementations may have MVRF for global VRF (VRF0) by default in the device. Al… |
| 1.3.6.1.4.1.9.10.113.1.2.1.1.1 | ColumnciscoMvpnGenOperStatusChange | read-only | current | This object describes the last operational change that happened for the given MVRF. createdMvrf - indicates that the MVRF was created in the device. deletedMvr… |
| 1.3.6.1.4.1.9.10.113.1.2.1.1.2 | ColumnciscoMvpnGenOperChangeTime | read-only | current | The time at which the last operational change for the MVRF in question took place. The last operational change is specified by ciscoMvpnGenOperStatusChange. |
| 1.3.6.1.4.1.9.10.113.1.2.1.1.3 | ColumnciscoMvpnGenAssociatedInterfaces | read-only | current | Total number of interfaces associated with this MVRF (including the MDT tunnel interface) with ifOperStatus = up(1). |
| 1.3.6.1.4.1.9.10.113.1.2.1.1.4 | ColumnciscoMvpnGenRowStatus | read-create | current | This variable is used to create or delete a row in this table. |
| 1.3.6.1.4.1.9.10.113.1.3 | NodeciscoMvpnConfig | |||
| 1.3.6.1.4.1.9.10.113.1.3.1 | TableciscoMvpnMdtDefaultTable | not-accessible | current | This table specifies the default MDT address and the encapsulation type used for a MVRF instance. |
| 1.3.6.1.4.1.9.10.113.1.3.1.1 | RowciscoMvpnMdtDefaultEntry | not-accessible | current | An entry in this table is created for every MVRF for which a default MDT group is configured. A MVRF which does not have a default MDT group configured will no… |
| 1.3.6.1.4.1.9.10.113.1.3.1.1.1 | ColumnciscoMvpnMdtDefaultAddrType | read-create | current | The Internet address type of ciscoMvpnMdtDefaultAddress. |
| 1.3.6.1.4.1.9.10.113.1.3.1.1.2 | ColumnciscoMvpnMdtDefaultAddress | read-create | current | The default MDT address to be used for the MVRF in question. |
| 1.3.6.1.4.1.9.10.113.1.3.1.1.3 | ColumnciscoMvpnMdtEncapsType | read-create | current | The encapsulation type to be used in the MVRF in question. |
| 1.3.6.1.4.1.9.10.113.1.3.1.1.4 | ColumnciscoMvpnMdtDefaultRowStatus | read-create | current | This variable is used to create, modify or delete a row in this table. |
| 1.3.6.1.4.1.9.10.113.1.3.2 | TableciscoMvpnMdtDataTable | not-accessible | current | This table specifies the range of data MDT addresses and associated variables for a MVRF instance. |
| 1.3.6.1.4.1.9.10.113.1.3.2.1 | RowciscoMvpnMdtDataEntry | not-accessible | current | An entry in this table is created for every MVRF for which a data MDT group range is configured. A MVRF which does not have a data MDT group range configured w… |
| 1.3.6.1.4.1.9.10.113.1.3.2.1.1 | ColumnciscoMvpnMdtDataRangeAddrType | read-create | current | The Internet address type of ciscoMvpnMdtDataRangeAddress. |
| 1.3.6.1.4.1.9.10.113.1.3.2.1.2 | ColumnciscoMvpnMdtDataRangeAddress | read-create | current | The data MDT group range address for the given MVRF. This along with ciscoMvpnMdtDataWildcardBits gives the pool of data MDT addresses that can be used for enc… |
| 1.3.6.1.4.1.9.10.113.1.3.2.1.3 | ColumnciscoMvpnMdtDataWildcardType | read-create | current | The Internet address type of ciscoMvpnMdtDataWildcardBits. |
| 1.3.6.1.4.1.9.10.113.1.3.2.1.4 | ColumnciscoMvpnMdtDataWildcardBits | read-create | current | Wildcard bits which when used along with data MDT range address, give a pool of addresses to be used in a MVRF. For example, if ciscoMvpnMdtDataRangeAddress is… |
| 1.3.6.1.4.1.9.10.113.1.3.2.1.5 | ColumnciscoMvpnMdtDataThreshold | read-create | current | The bandwidth threshold value which when exceeded for a multicast routing entry in the given MVRF, triggers usage of data MDT address instead of default MDT ad… |
| 1.3.6.1.4.1.9.10.113.1.3.2.1.6 | ColumnciscoMvpnMdtDataRowStatus | read-create | current | This variable is used to create, modify or delete a row in this table. |
| 1.3.6.1.4.1.9.10.113.1.4 | NodeciscoMvpnProtocol | |||
| 1.3.6.1.4.1.9.10.113.1.4.1 | TableciscoMvpnMrouteMdtTable | not-accessible | current | Given a multicast routing entry and the context MVRF, this table provides information about the MDT group being used for encapsulating the traffic for the mult… |
| 1.3.6.1.4.1.9.10.113.1.4.1.1 | RowciscoMvpnMrouteMdtEntry | not-accessible | current | An entry in this table exists for a multicast routing entry the traffic for which is being encapsulated in a context MVRF. |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.1 | ColumnciscoMvpnMrouteMvrfGrpAddrType | not-accessible | current | The Internet address type of ciscoMvpnMrouteMvrfGroup. |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.2 | ColumnciscoMvpnMrouteMvrfGroup | not-accessible | current | Group adddress of multicast routing entry in question. |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.3 | ColumnciscoMvpnMrouteMvrfSrcAddrType | not-accessible | current | The Internet address type of ciscoMvpnMrouteMvrfSource. |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.4 | ColumnciscoMvpnMrouteMvrfSource | not-accessible | current | Source adddress of the multicast routing entry in question. |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.5 | ColumnciscoMvpnMrouteUpDownStreamInfo | not-accessible | current | Indicates if this PE is the upstream (sending) or the downstream (receiving) router for the multicast routing entry specified by ciscoMvpnMrouteMvrfSource and … |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.6 | ColumnciscoMvpnMrouteMdtGrpAddrType | read-only | current | The Internet address type of ciscoMvpnMrouteMdtGroup. |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.7 | ColumnciscoMvpnMrouteMdtGroup | read-only | current | MDT group address used to encapsulate the multicast routing entry specified by ciscoMvpnMrouteMvrfSource and ciscoMvpnMrouteMvrfGroup in the context MVRF speci… |
| 1.3.6.1.4.1.9.10.113.1.4.1.1.8 | ColumnciscoMvpnMrouteMdtType | read-only | current | Indicates the type of MDT group used for encapsulation. |
| 1.3.6.1.4.1.9.10.113.1.4.2 | TableciscoMvpnBgpMdtUpdateTable | not-accessible | current | This table has information about the BGP advertisement of the the MDT groups. (These advertisements are generated and used for source discovery when SSM is use… |
| 1.3.6.1.4.1.9.10.113.1.4.2.1 | RowciscoMvpnBgpMdtUpdateEntry | not-accessible | current | An entry in this table is created when a BGP advertisement of the MDT group is received and cached in the PE device. An entry in this table deleted when such a… |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.1 | ColumnciscoMvpnBgpMdtUpdGrpAddrType | not-accessible | current | The Internet address type of ciscoMvpnBgpMdtUpdateGroup. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.2 | ColumnciscoMvpnBgpMdtUpdateGroup | not-accessible | current | MDT group address in the BGP MDT advertisement. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.3 | ColumnciscoMvpnBgpMdtUpdateRd | read-only | current | RD (route distinguisher) in the BGP MDT advertisement. This is the RD corresponding to the originator PE. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.4 | ColumnciscoMvpnBgpMdtUpdSrcAddrType | not-accessible | current | The Internet address type of ciscoMvpnBgpMdtUpdateSource. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.5 | ColumnciscoMvpnBgpMdtUpdateSource | not-accessible | current | MDT source address in the BGP MDT advertisement. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.6 | ColumnciscoMvpnBgpMdtUpdOrigAddrType | read-only | current | The Internet address type of ciscoMvpnBgpMdtUpdateOriginator. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.7 | ColumnciscoMvpnBgpMdtUpdateOriginator | read-only | current | The BGP peering address of the device that originated (or advertized) the BGP MDT update. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.8 | ColumnciscoMvpnBgpMdtUpdNhAddrType | read-only | current | The Internet address type of ciscoMvpnBgpMdtUpdateNexthop. |
| 1.3.6.1.4.1.9.10.113.1.4.2.1.9 | ColumnciscoMvpnBgpMdtUpdateNexthop | read-only | current | The next-hop address (address of the border router to be used to reach the destination network) in the BGP MDT advertisement. |
| 1.3.6.1.4.1.9.10.113.1.4.3 | TableciscoMvpnMdtJnRcvTable | not-accessible | current | This table has information about the data MDT join TLVs received by a device. |
| 1.3.6.1.4.1.9.10.113.1.4.3.1 | RowciscoMvpnMdtJnRcvEntry | not-accessible | current | An entry in this table is created or updated for every MDT data join TLV received and cached in the device. The value of mplsVpnVrfName in such an entry specif… |
| 1.3.6.1.4.1.9.10.113.1.4.3.1.1 | ColumnciscoMvpnMdtJnRcvGrpAddrType | not-accessible | current | The Internet address type of ciscoMvpnMdtJnRcvGroup. |
| 1.3.6.1.4.1.9.10.113.1.4.3.1.2 | ColumnciscoMvpnMdtJnRcvGroup | not-accessible | current | Data MDT group address in the MDT join TLV. |
| 1.3.6.1.4.1.9.10.113.1.4.3.1.3 | ColumnciscoMvpnMdtJnRcvSrcAddrType | not-accessible | current | The Internet address type of ciscoMvpnMdtJnRcvSource. |
| 1.3.6.1.4.1.9.10.113.1.4.3.1.4 | ColumnciscoMvpnMdtJnRcvSource | not-accessible | current | Source address for the MDT multicast routing entry created following the receipt of MDT join TLV. |
| 1.3.6.1.4.1.9.10.113.1.4.3.1.5 | ColumnciscoMvpnMdtJnRcvUpTime | read-only | current | The time since this MDT join TLV was first received by the device. |
| 1.3.6.1.4.1.9.10.113.1.4.3.1.6 | ColumnciscoMvpnMdtJnRcvExpTime | read-only | current | The amount of time remaining before the cache corresponding to this MDT join TLV is deleted from the device and the corresponding MDT multicast routing entry i… |
| 1.3.6.1.4.1.9.10.113.1.4.4 | TableciscoMvpnMdtJnSendTable | not-accessible | current | This table specifies the data MDT Join TLVs sent by a device. |
| 1.3.6.1.4.1.9.10.113.1.4.4.1 | RowciscoMvpnMdtJnSendEntry | not-accessible | current | Entries in this table exist for data MDT Join TLVs that are being sent by this device to other PEs. |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.1 | ColumnciscoMvpnMdtJnSendGrpAddrType | not-accessible | current | The Internet address type of ciscoMvpnMdtJnSendGroup. |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.2 | ColumnciscoMvpnMdtJnSendGroup | not-accessible | current | This indicates the address of a multicast group in the MVRF specified by the column mplsVpnVrfName. This along with ciscoMvpnMdtJnSendSource identifies the mul… |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.3 | ColumnciscoMvpnMdtJnSendSrcAddrType | not-accessible | current | The Internet address type of ciscoMvpnMdtJnSendSource. |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.4 | ColumnciscoMvpnMdtJnSendSource | not-accessible | current | This indicates the address of a source in the MVRF specified by the column mplsVpnVrfName. This, along with ciscoMvpnMdtJnSendGroup identifies the multicast ro… |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.5 | ColumnciscoMvpnMdtJnSendMdtGrpAddrType | read-only | current | The Internet address type of ciscoMvpnMdtJnSendMdtGroup. |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.6 | ColumnciscoMvpnMdtJnSendMdtGroup | read-only | current | The data MDT group in the MDT Join TLV sent. |
| 1.3.6.1.4.1.9.10.113.1.4.4.1.7 | ColumnciscoMvpnMdtJnSendMdtRefCt | read-only | current | Indicates how many multicast routing entries in the MVRF specified by the column mplsVpnVrfName are using ciscoMvpnMdtJnSendMdtGroup for encapsulation. |
| 1.3.6.1.4.1.9.10.113.1.4.5 | TableciscoMvpnTunnelTable | not-accessible | current | This table gives information about the MVPN/MDT tunnels present in the device. |
| 1.3.6.1.4.1.9.10.113.1.4.5.1 | RowciscoMvpnTunnelEntry | not-accessible | current | An entry in this table is created for every MVPN tunnel interface present in the device. The ifType for a MVPN tunnel is 'tunnel' (131). (A MVPN tunnel interfa… |
| 1.3.6.1.4.1.9.10.113.1.4.5.1.1 | ColumnciscoMvpnTunnelName | read-only | current | The canonical name assigned to the tunnel. The ifName of this tunnel interface should have a value equal to ciscoMvpnTunnelName. |
| 1.3.6.1.4.1.9.10.113.1.4.5.1.2 | ColumnciscoMvpnTunnelMvrf | read-only | current | Name of the MVRF that this tunnel is associated with. This object has the same value as mplsVpnVrfName for the MVRF. |
| 1.3.6.1.4.1.9.10.113.2 | NodeciscoMvpnConformance | |||
| 1.3.6.1.4.1.9.10.113.2.1 | NodeciscoMvpnGroups | |||
| 1.3.6.1.4.1.9.10.113.2.1.1 | GroupciscoMvpnScalarGroup | current | Collection of scalar objects required for MVPN management. | |
| 1.3.6.1.4.1.9.10.113.2.1.2 | GroupciscoMvpnMIBGenericGroup | current | Collection of objects needed for MVPN MVRF management. | |
| 1.3.6.1.4.1.9.10.113.2.1.3 | GroupciscoMvpnMIBMdtDefaultGroup | current | Collection of objects needed for MVPN default MDT group management. | |
| 1.3.6.1.4.1.9.10.113.2.1.4 | GroupciscoMvpnMIBMdtDataGroup | current | Collection of objects needed for MVPN data MDT group management. | |
| 1.3.6.1.4.1.9.10.113.2.1.5 | GroupciscoMvpnMIBMrouteMdtGroup | current | Collection of objects that list sources in a MVRF and the corresponding MDT groups. | |
| 1.3.6.1.4.1.9.10.113.2.1.6 | GroupciscoMvpnMIBBgpMdtUpdateGroup | current | Collection of objects needed for MVPN BGP MDT updates related information. | |
| 1.3.6.1.4.1.9.10.113.2.1.7 | GroupciscoMvpnMIBMdtJnRcvGroup | current | Collection of objects needed for management of MVPN MDT data joins received by a device. | |
| 1.3.6.1.4.1.9.10.113.2.1.8 | GroupciscoMvpnMIBMdtJnSendGroup | current | Collection of objects needed for management of MVPN MDT data joins received by a device. | |
| 1.3.6.1.4.1.9.10.113.2.1.9 | GroupciscoMvpnTunnelGroup | current | Objects required for MDT tunnel interface management. | |
| 1.3.6.1.4.1.9.10.113.2.1.10 | GroupciscoMvpnNotificationGroup | current | A collection of MVPN notifications. | |
| 1.3.6.1.4.1.9.10.113.2.2 | NodeciscoMvpnCompliances | |||
| 1.3.6.1.4.1.9.10.113.2.2.1 | ComplianceciscoMvpnModuleFullCompliance | current | Compliance statement for agents that support read-create so that both configuration and monitoring can be accomplished via this MIB module. | |
| 1.3.6.1.4.1.9.10.113.2.2.2 | ComplianceciscoMvpnModuleReadOnlyCompliance | read-only | current | Compliance statement for agents that support the monitoring of MVRFs via this MIB module. |