CISCO-NBAR-PROTOCOL-DISCOVERY-MIB
87 objects
Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that recognizes applications that are static (which use fixed TCP or UDP port numbers), and stateful (which dynamically assign TCP or UDP port numbers). Protocol Discovery - uses NBAR to show you the mix of applications currently running on the network. Key statistics are associated with each protocol. These statistics can be used to define traffic classes and QoS policies. Functionality: 1. To enable/disable Protocol Discovery per interface. 2. Display the protocols/applications which NBAR currently recognizes. 3. To display various Protocol Discovery statistics. 4. A configurable top N table which lists protocols using user defined criteria. 5. To configure notifications (traps) based on configurable statistic thresholds. 6. To maintain a history table of all notification events.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.244 | IdentityciscoNbarProtocolDiscoveryMIB | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that recognizes applications that are st… | ||
| 1.3.6.1.4.1.9.9.244.0 | NodecnpdMIBNotifications | |||
| 1.3.6.1.4.1.9.9.244.0.1 | NotificationcnpdThresholdRisingEvent | current | A cnpdThresholdRisingEvent is sent whenever a notification entry crosses its rising threshold and generates an event that is added to the cnpdThresholdHistoryT… | |
| 1.3.6.1.4.1.9.9.244.0.2 | NotificationcnpdThresholdFallingEvent | current | A cnpdThresholdConfigFallingEvent is sent whenever a notification entry crosses its falling threshold and generates an event that is added to the cnpdThreshold… | |
| 1.3.6.1.4.1.9.9.244.1 | NodecnpdMIBObjects | |||
| 1.3.6.1.4.1.9.9.244.1.1 | NodecnpdStatus | |||
| 1.3.6.1.4.1.9.9.244.1.1.1 | TablecnpdStatusTable | not-accessible | current | The cnpdStatusTable is used to enable and disable Protocol Discovery on an interface. |
| 1.3.6.1.4.1.9.9.244.1.1.1.1 | RowcnpdStatusEntry | not-accessible | current | An entry in the cnpdStatusTable contains objects for enabling or disabling Protocol Discovery on a per interface basis. |
| 1.3.6.1.4.1.9.9.244.1.1.1.1.1 | ColumncnpdStatusPdEnable | read-write | current | This object is used to enable or disable Protocol Discovery on an interface. If set to 'true' - Protocol Discovery is enabled on this Interface. If set to 'fal… |
| 1.3.6.1.4.1.9.9.244.1.1.1.1.2 | ColumncnpdStatusLastUpdateTime | read-only | current | The value of sysUpTime at the time Protocol Discovery was last enabled on an interface. If the interface does not have Protocol Discovery enabled this value is… |
| 1.3.6.1.4.1.9.9.244.1.2 | NodecnpdAllStats | |||
| 1.3.6.1.4.1.9.9.244.1.2.1 | TablecnpdAllStatsTable | not-accessible | current | The cnpdAllStatsTable contains all the statistics available for all the protocols/applications currently recognized by NBAR Protocol Discovery for a particular… |
| 1.3.6.1.4.1.9.9.244.1.2.1.1 | RowcnpdAllStatsEntry | not-accessible | current | An entry in the cnpdAllStatsTable table. This entry contains the statistics collected on all the protocols which NBAR classifies for a particular interface. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.1 | ColumncnpdAllStatsProtocolsIndex | not-accessible | current | An object which represents a unique identifier for a protocol or application which NBAR currently recognizes. This object is an index into the SupportedProtoco… |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.2 | ColumncnpdAllStatsProtocolName | read-only | current | Name of the application or protocol, a unique textual string, assigned in the cnpdSupportedProtocolsTable. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.3 | ColumncnpdAllStatsInPkts | read-only | current | The packet count of inbound packets as determined by Protocol Discovery. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.4 | ColumncnpdAllStatsOutPkts | read-only | current | The packet count of outbound packets as determined by Protocol Discovery. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.5 | ColumncnpdAllStatsInBytes | read-only | current | The byte count of inbound octets as determined by Protocol Discovery. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.6 | ColumncnpdAllStatsOutBytes | read-only | current | The byte count of outbound octets as determined by Protocol Discovery. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.7 | ColumncnpdAllStatsHCInPkts | read-only | current | The packet count of inbound packets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsInPkts. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.8 | ColumncnpdAllStatsHCOutPkts | read-only | current | The packet count of outbound packets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsOutPkts. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.9 | ColumncnpdAllStatsHCInBytes | read-only | current | The byte count of inbound octets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsInBytes. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.10 | ColumncnpdAllStatsHCOutBytes | read-only | current | The byte count of outbound octets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsOutBytes. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.11 | ColumncnpdAllStatsInBitRate | read-only | current | The inbound bit rate as determined by Protocol Discovery. |
| 1.3.6.1.4.1.9.9.244.1.2.1.1.12 | ColumncnpdAllStatsOutBitRate | read-only | current | The outbound bit rate as determined by Protocol Discovery. |
| 1.3.6.1.4.1.9.9.244.1.3 | NodecnpdTopNConfig | |||
| 1.3.6.1.4.1.9.9.244.1.3.1 | TablecnpdTopNConfigTable | not-accessible | current | The cnpdTopNConfigTable is used to configure cnpdTopNStatsTable's. |
| 1.3.6.1.4.1.9.9.244.1.3.1.1 | RowcnpdTopNConfigEntry | not-accessible | current | This entry provides the objects to configure and thus initiate the generation of a cnpdTopNStatsTable.. |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.1 | ColumncnpdTopNConfigIndex | not-accessible | current | A monotonically increasing integer which uniquely identifies a cnpdTopNConfigEntry in the cnpdTopNConfigTable. |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.2 | ColumncnpdTopNConfigIfIndex | read-create | current | This object allows the management station to select the interface, which Protocol Discovery is running on, to be used to create this cnpdTopNConfigEntry. |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.3 | ColumncnpdTopNConfigStatsSelect | read-create | current | This object allows the management station to select the statistic used to base the order of the top-n table on. For example: a cnpdTopNConfigStatsSelect of bit… |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.4 | ColumncnpdTopNConfigSampleTime | read-create | current | If the cnpdTopNConfigStatsSelect is bitRateIn, bitRateOut or bitRateSum, then this value is the interval in seconds that the bitrate is sampled. This has no ef… |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.5 | ColumncnpdTopNConfigRequestedSize | read-create | current | The requested size of the associated cnpdTopNStatsTable entry. For example a cnpdTopNConfigRequestedSize of 20 indicates the management station wants to create… |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.6 | ColumncnpdTopNConfigGrantedSize | read-only | current | The actual size of the associated cnpdTopNStatsTable entry. The reason this may differ from cnpdTopNConfigRequestedSize is because a management station may req… |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.7 | ColumncnpdTopNConfigTime | read-only | current | The value of sysUpTime when the associated cnpdTopNStatsTable entry was created. |
| 1.3.6.1.4.1.9.9.244.1.3.1.1.8 | ColumncnpdTopNConfigStatus | read-create | current | This object is used to create or delete the row entry in cnpdTopNConfigTable. When creating a row entry the management station is required to specify a value f… |
| 1.3.6.1.4.1.9.9.244.1.4 | NodecnpdTopNStats | |||
| 1.3.6.1.4.1.9.9.244.1.4.1 | TablecnpdTopNStatsTable | not-accessible | current | A cnpdTopNStatsTable describes an ordered list of protocols. |
| 1.3.6.1.4.1.9.9.244.1.4.1.1 | RowcnpdTopNStatsEntry | not-accessible | current | This entry is used to store a set of objects which describe a cnpdTopNStatsTable. A cnpdTopNStatsTable is a number of protocols and statistics sorted according… |
| 1.3.6.1.4.1.9.9.244.1.4.1.1.1 | ColumncnpdTopNStatsIndex | not-accessible | current | A monotonically increasing integer which uniquely identifies a cnpdTopNStatsEntry in the cnpdTopNStatsTable. |
| 1.3.6.1.4.1.9.9.244.1.4.1.1.2 | ColumncnpdTopNStatsProtocolName | read-only | current | Name of the application or protocol, a unique textual string, assigned in the cnpdSupportedProtocolsTable. |
| 1.3.6.1.4.1.9.9.244.1.4.1.1.3 | ColumncnpdTopNStatsRate | read-only | current | The amount of change in the selected statistic during this sampling interval. The selected statistic is the cnpdTopNConfigStatsSelect from the associated cnpdT… |
| 1.3.6.1.4.1.9.9.244.1.4.1.1.4 | ColumncnpdTopNStatsHCRate | read-only | current | The amount of change in the selected statistic during this sampling interval. The selected statistic is the cnpdTopNConfigStatsSelect from the associated cnpdT… |
| 1.3.6.1.4.1.9.9.244.1.5 | NodecnpdThresholdConfig | |||
| 1.3.6.1.4.1.9.9.244.1.5.1 | TablecnpdThresholdConfigTable | not-accessible | current | The cnpdThresholdConfigTable allows the management station to create thresholds for the purpose of sending notifications if breached, and creating a history of… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1 | RowcnpdThresholdConfigEntry | not-accessible | current | This entry contains configuration information to set thresholds for the purpose of notifications. The management station is allowed to set thresholds on indivi… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.1 | ColumncnpdThresholdConfigIndex | not-accessible | current | A monotonically increasing integer which uniquely identifies an entry in the cnpdThresholdConfigTable. |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.2 | ColumncnpdThresholdConfigIfIndex | read-create | current | This object allows the management station to select the interface, which Protocol Discovery is running on, to be used to create this cnpdThresholdConfigTable e… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.3 | ColumncnpdThresholdConfigInterval | read-create | current | The interval in seconds over which the data is sampled and compared with cnpdThresholdConfigRising and cnpdThresholdConfigFalling thresholds. |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.4 | ColumncnpdThresholdConfigSampleType | read-create | current | The method of sampling the selected statistic and calculating the value to be compared against cnpdThresholdConfigRising or cnpdThresholdConfigFalling threshol… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.5 | ColumncnpdThresholdConfigProtocol | read-create | current | The application or protocol which the management station wishes to configure a threshold on. This object is an index into the SupportedProtocolsTable where det… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.6 | ColumncnpdThresholdConfigProtocolAny | read-create | current | If set to 'true' - this threshold is configured to check for any protocol which meets the threshold criteria. This means that multiple protocols can generate T… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.7 | ColumncnpdThresholdConfigStatsSelect | read-create | current | This object allows the management station to select the statistic used to base the threshold on. For example a cnpdThresholdConfigStatsSelect of bitRateSum mea… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.8 | ColumncnpdThresholdConfigStartup | read-create | current | This controls the type of notification that is sent when this threshold entry is first enabled. Because there is no previous sampling history, choosing one of … |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.9 | ColumncnpdThresholdConfigRising | read-create | current | This is the threshold object which the managment station sets to determine if it gets breached. It indicates the statistic being sampled was rising. When the c… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.10 | ColumncnpdThresholdConfigFalling | read-create | current | This is the threshold object which the management station sets to determine if it gets breached. It indicates the statistic being sampled was falling. When cur… |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.12 | ColumncnpdThresholdConfigStatus | read-create | current | This object is used to create or delete the row entry in cnpdThresholdConfigTable. When creating a row entry the management station is required to specify a va… |
| 1.3.6.1.4.1.9.9.244.1.6 | NodecnpdThresholdHistory | |||
| 1.3.6.1.4.1.9.9.244.1.6.1 | TablecnpdThresholdHistoryTable | not-accessible | current | The Threshold History table. Notifications are unreliable so this table provides a history of the last 5000 threshold breached events. A notification can be tr… |
| 1.3.6.1.4.1.9.9.244.1.6.1.1 | RowcnpdThresholdHistoryEntry | not-accessible | current | This entry is created each time a threshold is breached. Thus there is not necessarily a one to one relationship to cnpdThresholdConfigTable as not every Thres… |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.1 | ColumncnpdThresholdHistoryIndex | not-accessible | current | A monotonically increasing integer which uniquely identifies this cnpdThresholdHistoryEntry in the cnpdThresholdHistory table. |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.2 | ColumncnpdThresholdHistoryConfigIndex | read-only | current | The cnpdThresholdConfigTable entry which generated this entry. Using this object the management station can backtrack to the appropriate cnpdThresholdConfigEnt… |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.3 | ColumncnpdThresholdHistoryValue | read-only | current | The actual value of the statistic when the sampling was made. |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.4 | ColumncnpdThresholdHistoryType | read-only | current | Describes whether this is an event caused by a rising or falling threshold breach. |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.5 | ColumncnpdThresholdHistoryTime | read-only | current | The value of sysUpTime of the running configuration when the event occurred. |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.6 | ColumncnpdThresholdHistoryProtocol | read-only | current | The application or protocol which the management station configured a threshold on. This object is an index into the SupportedProtocolsTable where details of t… |
| 1.3.6.1.4.1.9.9.244.1.6.1.1.7 | ColumncnpdThresholdHistoryStatsSelect | read-only | current | This is the statistic used to base the threshold on. |
| 1.3.6.1.4.1.9.9.244.1.7 | NodecnpdNotificationsConfig | |||
| 1.3.6.1.4.1.9.9.244.1.7.1 | ScalarcnpdNotificationsEnable | read-write | current | This object is used to enable or disable Notifications on a global basis. If set to 'true' - Notifications are enabled. If set to 'false' - Notifications are d… |
| 1.3.6.1.4.1.9.9.244.1.8 | NodecnpdSupportedProtocols | |||
| 1.3.6.1.4.1.9.9.244.1.8.1 | TablecnpdSupportedProtocolsTable | not-accessible | current | The Supported Protocols table lists all the protocols and applications which NBAR is currently capable of recognizing. |
| 1.3.6.1.4.1.9.9.244.1.8.1.1 | RowcnpdSupportedProtocolsEntry | not-accessible | current | A entry in the Supported Protocols table reflecting key information about a protocol. |
| 1.3.6.1.4.1.9.9.244.1.8.1.1.1 | ColumncnpdSupportedProtocolsIndex | not-accessible | current | A unique identifier of a row in this table. Thus it also represents a unique identifier for a protocol or application which NBAR currently recognizes. |
| 1.3.6.1.4.1.9.9.244.1.8.1.1.2 | ColumncnpdSupportedProtocolsName | read-only | current | This object reflects the valid string of a protocol or application which NBAR currently recognizes. |
| 1.3.6.1.4.1.9.9.244.2 | NodecnpdMIBConformance | |||
| 1.3.6.1.4.1.9.9.244.2.1 | NodecnpdMIBCompliances | |||
| 1.3.6.1.4.1.9.9.244.2.1.1 | CompliancecnpdMIBCompliance | current | The compliance statement for entities that implement NBAR Protocol Discovery on a Cisco router. | |
| 1.3.6.1.4.1.9.9.244.2.2 | NodecnpdMIBGroups | |||
| 1.3.6.1.4.1.9.9.244.2.2.1 | GroupcnpdStatsGroup | current | Required objects to provide protocol application discovery info. | |
| 1.3.6.1.4.1.9.9.244.2.2.2 | GroupcnpdTopNGroup | current | The set of objects supported to record notification events. | |
| 1.3.6.1.4.1.9.9.244.2.2.3 | GroupcnpdThresholdGroup | current | The set of objects supported to record notification events. | |
| 1.3.6.1.4.1.9.9.244.2.2.4 | GroupcnpdMIBNotificationsGroup | current | The set of notification events supported. | |
| 1.3.6.1.4.1.9.9.244.2.2.5 | GroupcnpdMIBNotificationsConfigGroup | current | The set of notification configuration events. | |
| 1.3.6.1.4.1.9.9.244.2.2.6 | GroupcnpdSupportedProtocolsGroup | current | The set of objects describing a protocol or application. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoPdDataType | INTEGER { bitRateIn (1), bitRateOut (2), bitRateSum (3), byteCountIn (4), byteCountOut (5), byteCountSum (6), packetCountIn (7), packetCountOut (8), packetCountSum (9) } | current | These are the data types which NBAR can measure a particular protocol by. bitRateIn(1) - incoming bitrate. bitRateOut(2) - outgoing bitrate. bitRateSum(3) - sum of incoming and outgoing bitrate. byteCountIn(4) - incomin… |
| CiscoPdProtocolIndex | Unsigned32 | current | An object which represents a unique identifier for a protocol or application which NBAR currently recognizes. The value of this object is defined in the cnpdSupportedProtocolsTable. |
| CiscoPdProtocolName | OCTET STRING (SIZE (1..255)) | current | Name of an application or protocol, which NBAR is capable of recognizing. For example: ftp, vdolive and citrix. |