CISCO-OAM-MIB
50 objects
A MIB module for invoking OAM loopback Ping on ATM connections.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| RMON-MIB | OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.15 | IdentityciscoOamPingMIB | A MIB module for invoking OAM loopback Ping on ATM connections. | ||
| 1.3.6.1.4.1.9.10.15.1 | NodeciscoOamPingMIBObjects | |||
| 1.3.6.1.4.1.9.10.15.1.1 | TableoamLoopbackPingTable | not-accessible | current | A table of OAM loopback request entries. (This table is similar to the CISCO-PING-MIB.) |
| 1.3.6.1.4.1.9.10.15.1.1.1 | RowoamLoopbackPingEntry | not-accessible | current | A OAM loopback request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to th… |
| 1.3.6.1.4.1.9.10.15.1.1.1.1 | ColumnoamLoopbackPingSerialNumber | not-accessible | current | Object which identifies a unique entry in the oamLoopbackPingTable. A management station wishing to initiate a OAM-loopback operation should use a pseudo-rando… |
| 1.3.6.1.4.1.9.10.15.1.1.1.2 | ColumnoamLoopbackPingInterface | read-create | current | The interface of the connection on which OAM loopbacks are to be sent. Once an instance of this object is created, its value can not be changed. The value spec… |
| 1.3.6.1.4.1.9.10.15.1.1.1.3 | ColumnoamLoopbackPingVpi | read-create | current | The VPI of the connection on which OAM loopbacks are to be sent. Once an instance of this object is created, its value can not be changed. |
| 1.3.6.1.4.1.9.10.15.1.1.1.4 | ColumnoamLoopbackPingVci | read-create | current | Either -1 or the VCI of the connection on which F5 OAM loopback cells are to be sent. If the value of this object is -1, then an F4 OAM loopback cells will be … |
| 1.3.6.1.4.1.9.10.15.1.1.1.5 | ColumnoamLoopbackPingType | read-create | current | The type of OAM loopback to be performed. |
| 1.3.6.1.4.1.9.10.15.1.1.1.6 | ColumnoamLoopbackPingLocation | read-create | current | The value to be placed in the 'Loopback Location ID' field of the OAM loopback cell. If this value is less than 16 octets in length, then it will be appended w… |
| 1.3.6.1.4.1.9.10.15.1.1.1.7 | ColumnoamLoopbackPingLocationFlag | read-create | current | Specifies what kind of information is embedded into the oamLoopbackPingLocation string. This flag is ignored when oamLoopbackPingType is set to segment. |
| 1.3.6.1.4.1.9.10.15.1.1.1.8 | ColumnoamLoopbackPingCount | read-create | current | Specifies the number of OAM loopback cells to send to the target in this sequence. |
| 1.3.6.1.4.1.9.10.15.1.1.1.9 | ColumnoamLoopbackPingTimeout | read-create | current | Specifies the amount of time to wait for a response to a transmitted OAM loopback cells before declaring the OAM loopback cells as 'dropped.' |
| 1.3.6.1.4.1.9.10.15.1.1.1.10 | ColumnoamLoopbackPingDelay | read-create | current | Specifies the minimum amount of time to wait before sending the next OAM loopback cell in a sequence after receiving a response or declaring a timeout for a pr… |
| 1.3.6.1.4.1.9.10.15.1.1.1.11 | ColumnoamLoopbackPingTrapOnCompletion | read-create | current | Specifies whether or not a oamLoopbackPingCompletion trap should be issued on completion of the sequence of OAM loopback cells. If such a trap is desired, it i… |
| 1.3.6.1.4.1.9.10.15.1.1.1.12 | ColumnoamLoopbackPingSentCells | read-only | current | The number of OAM loopback cells that have been sent to the target in this sequence. |
| 1.3.6.1.4.1.9.10.15.1.1.1.13 | ColumnoamLoopbackPingReceivedCells | read-only | current | The number of OAM loopback cells that have been received from the target in this sequence. |
| 1.3.6.1.4.1.9.10.15.1.1.1.14 | ColumnoamLoopbackPingMinRtt | read-only | current | The minimum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback re… |
| 1.3.6.1.4.1.9.10.15.1.1.1.15 | ColumnoamLoopbackPingAvgRtt | read-only | current | The average round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback re… |
| 1.3.6.1.4.1.9.10.15.1.1.1.16 | ColumnoamLoopbackPingMaxRtt | read-only | current | The maximum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback re… |
| 1.3.6.1.4.1.9.10.15.1.1.1.17 | ColumnoamLoopbackPingCompleted | read-only | current | Set to true when all the OAM loopback cells in this sequence have been either responded to or timed out. |
| 1.3.6.1.4.1.9.10.15.1.1.1.18 | ColumnoamLoopbackPingEntryOwner | read-create | current | The entity that configured this entry. |
| 1.3.6.1.4.1.9.10.15.1.1.1.19 | ColumnoamLoopbackPingEntryStatus | read-create | current | The status of this table entry. Once the entry status is set to active, the associate entry cannot be modified until the sequence completes (oamLoopbackPingCom… |
| 1.3.6.1.4.1.9.10.15.1.1.1.20 | ColumnoamLoopbackPingDir | read-create | current | This object set the traveling direction of the OAM segment loopback cells which are injected to the connection endpoint. |
| 1.3.6.1.4.1.9.10.15.1.1.1.21 | ColumnoamLoopbackPingOperStatus | read-only | current | This object indicates the ping test status. |
| 1.3.6.1.4.1.9.10.15.1.1.1.22 | ColumnoamLoopbackPingExecTime | read-only | current | The value of sysUpTime when the MIB object is created which triggers the loppback ping test. |
| 1.3.6.1.4.1.9.10.15.1.1.1.23 | ColumnoamLoopbackPingMinRttuSec | read-only | current | The minimum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback re… |
| 1.3.6.1.4.1.9.10.15.1.1.1.24 | ColumnoamLoopbackPingAvgRttuSec | read-only | current | The average round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback re… |
| 1.3.6.1.4.1.9.10.15.1.1.1.25 | ColumnoamLoopbackPingMaxRttuSec | read-only | current | The maximum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback re… |
| 1.3.6.1.4.1.9.10.15.1.2 | TableoamLoopbackSegEndPointTable | not-accessible | current | This table contains a list of OAM loopback segment endpoints. When the endpoint is an OAM segment endpoint, it is able to send ATM segment loop back cells or l… |
| 1.3.6.1.4.1.9.10.15.1.2.1 | RowoamLoopbackSegEndPointEntry | not-accessible | current | An entry in the segment endpoint table. |
| 1.3.6.1.4.1.9.10.15.1.2.1.1 | ColumnoamLoopSegVpi | not-accessible | current | The VPI value of a VP or VC connection. |
| 1.3.6.1.4.1.9.10.15.1.2.1.2 | ColumnoamLoopSegVci | not-accessible | current | The VCI value of VC connection. For a VPC connection, the VCI value is 0. |
| 1.3.6.1.4.1.9.10.15.1.2.1.3 | ColumnoamLoopSegRowStatus | read-create | current | To create, delete an OAM segment entry. Only the value 'active', 'createAndGo', and 'destroy' are supported. If the connection endpoint does not exist, the ent… |
| 1.3.6.1.4.1.9.10.15.2 | NodeoamLoopbackPingMIBTrapPrefix | |||
| 1.3.6.1.4.1.9.10.15.2.0 | NodeoamLoopbackPingMIBTraps | |||
| 1.3.6.1.4.1.9.10.15.2.0.1 | NotificationoamLoopbackPingCompletionTrap | current | A oamLoopbackPingCompleted trap is sent at the completion of a sequence of OAM loopback cells if such a trap was requested when the sequence was initiated. | |
| 1.3.6.1.4.1.9.10.15.3 | NodeciscoOamPingMIBConformance | |||
| 1.3.6.1.4.1.9.10.15.3.1 | NodeciscoOamPingMIBCompliances | |||
| 1.3.6.1.4.1.9.10.15.3.1.1 | ComplianceciscoOamPingMIBCompliance | deprecated | The compliance statement for the Cisco OAM MIB. | |
| 1.3.6.1.4.1.9.10.15.3.1.2 | ComplianceciscoOamPingMIBCompliance2 | deprecated | The compliance statement for the Cisco OAM MIB. | |
| 1.3.6.1.4.1.9.10.15.3.1.3 | ComplianceciscoOamPingMIBCompliance3 | current | The compliance statement for the Cisco OAM MIB. | |
| 1.3.6.1.4.1.9.10.15.3.2 | NodeciscoOamPingMIBGroups | |||
| 1.3.6.1.4.1.9.10.15.3.2.1 | GroupciscoOamPingMIBGroup | deprecated | A collection of objects providing the ability to invoke the sending of OAM loopback cells. | |
| 1.3.6.1.4.1.9.10.15.3.2.2 | GroupciscoOamPing2MIBGroup | deprecated | A collection of objects providing the ability to invoke the sending of OAM loopback cells. | |
| 1.3.6.1.4.1.9.10.15.3.2.3 | GroupciscoOamPingSegEndPointGroup | current | A collection of objects providing the ability to provision ATM connection endpoints to be OAM segment loopback endpoint. | |
| 1.3.6.1.4.1.9.10.15.3.2.4 | GroupoamLoopbackNotificationsGroup | current | A collection of notifications for OAM loopback ping test. | |
| 1.3.6.1.4.1.9.10.15.3.2.5 | GroupciscoOamPingMIBGroupRev3 | current | A collection of objects providing the ability to invoke the sending of OAM loopback cells. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoOAMPingDir | INTEGER { forward(1), backward(2) } | current | Direction in which the OAM segment cells are sent: forward : send OAM loopback cells in the direction form the originator towards the destination of the connection. backward : send OAM loopback cells in the direction to… |
| CiscoOAMPingStatus | INTEGER { success(1), timeOut(2), resourceNotAvailable(3), aborted(4), inProgress(5), noResponseData(6), failToStart(7) } | current | Defines possible test status. success(1) - The test has completed. timeOut(2) - The test has been failed because the test does not receive loopback cell response from remote endpoint and it times out. resourceNotAvailab… |