MIB Viewer

CISCO-OPTICAL-IF-EXTN-MIB

46 objects
A MIB module containing extensions to the IF-MIB for optical interfaces.
Imported Objects
CISCO-SMIciscoExperiment
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.10.66IdentityciscoOpticalIfExtnMIBA MIB module containing extensions to the IF-MIB for optical interfaces.
1.3.6.1.4.1.9.10.66.1NodecoIfExtnMIBObjects
1.3.6.1.4.1.9.10.66.1.1NodecoIfTypeExtnGroup
1.3.6.1.4.1.9.10.66.1.1.1TablecoIfTypeExtnTablenot-accessiblecurrentThis table contains extensions to the ifType object defined in the IF-MIB for optical interfaces.
1.3.6.1.4.1.9.10.66.1.1.1.1RowcoIfTypeExtnEntrynot-accessiblecurrentAn entry contains extensions to the ifType object defined in the IF-MIB for one optical interface.
1.3.6.1.4.1.9.10.66.1.1.1.1.1ColumncoIfTypeExtnread-onlycurrentThis object indicates the type of an optical interface, when the type is not specified in the ifType object in the IF-MIB, i.e., when the ifType object is set …
1.3.6.1.4.1.9.10.66.1.2NodecoIfWavelengthGroup
1.3.6.1.4.1.9.10.66.1.2.1TablecoIfWavelengthTablenot-accessiblecurrentThis table contains wavelength information for optical interfaces.
1.3.6.1.4.1.9.10.66.1.2.1.1RowcoIfWavelengthEntrynot-accessiblecurrentAn entry contains wavelength information for one optical interface.
1.3.6.1.4.1.9.10.66.1.2.1.1.1ColumncoIfDwdmFrequencyread-writecurrentThe nominal central frequency associated with this interface, in GHz. This object is instantiated for interfaces with coIfTypeExtn value of 'wdmChannel' and 'w…
1.3.6.1.4.1.9.10.66.1.3NodecoIfDwdmChannelGroup
1.3.6.1.4.1.9.10.66.1.3.3TablecoIfDwdmChannelGroupTablenot-accessiblecurrentThis table contains information about interfaces representing groups of DWDM channels. This includes interfaces with coIfTypeExtn value of 'wdmChannelGroup'.
1.3.6.1.4.1.9.10.66.1.3.3.1RowcoIfDwdmChannelGroupEntrynot-accessiblecurrentAn entry contains information about one interface that represents a group of DWDM channels. The group can be described as a specified set of DWDM frequencies, …
1.3.6.1.4.1.9.10.66.1.3.3.1.1ColumncoIfDwdmChannelGroupMinFrequencyread-writecurrentThe lowest frequency represented in the bitmap specified in coIfDwdmChannelGroupBitmap, i.e., the frequency represented by bit 0 of octet 1 of coIfDwdmChannelG…
1.3.6.1.4.1.9.10.66.1.3.3.1.2ColumncoIfDwdmChannelGroupSpacingread-writecurrentThe difference in frequency between successive bits in coIfDwdmChannelGroupBitmap. This is typically the frequency difference between adjacent channels in the …
1.3.6.1.4.1.9.10.66.1.3.3.1.3ColumncoIfDwdmChannelGroupBitmapLogicread-writecurrentThis object indicates whether coIfDwdmChannelGroupBitmap identifies channels included in the channel group, or whether it identifies channels excluded from the…
1.3.6.1.4.1.9.10.66.1.3.3.1.4ColumncoIfDwdmChannelGroupBitmapread-writecurrentThe DWDM channel bitmap that indicates those channels that are included or excluded (depending on the value of coIfDwdmChannelBitmapLogic) from the DWDM channe…
1.3.6.1.4.1.9.10.66.1.4NodecoIfXcvrGroup
1.3.6.1.4.1.9.10.66.1.4.1TablecoIfXcvrTablenot-accessiblecurrentThis table contains objects to control transceivers (lasers and optical receivers) at optoelectronic interfaces.
1.3.6.1.4.1.9.10.66.1.4.1.1RowcoIfXcvrEntrynot-accessiblecurrentAn entry contains objects for control of a transceiver at an optoelectronic interface.
1.3.6.1.4.1.9.10.66.1.4.1.1.1ColumncoIfXcvrLaserAdminStatusread-writecurrentThe desired state of the laser on this interface. This object differs from ifAdminStatus in the IF-MIB, since in some cases setting ifAdminStatus to 'down' cau…
1.3.6.1.4.1.9.10.66.1.4.1.1.2ColumncoIfXcvrLaserOperStatusread-onlycurrentThis object indicates the current operational status of the laser on this interface. 'transmitting': The laser is on. 'degraded': The laser is on, but there is…
1.3.6.1.4.1.9.10.66.1.4.1.1.3ColumncoIfXcvrMinLaserFrequencyread-writecurrentThe lowest frequency represented in the bitmap specified in coIfXcvrLaserFrequencyBitmap, i.e., the frequency represented by bit 0 of octet 1 of coIfXcvrLaserF…
1.3.6.1.4.1.9.10.66.1.4.1.1.4ColumncoIfXcvrLaserFrequencySpacingread-writecurrentThe difference in frequency between successive bits in coIfXcvrLaserFrequencyBitmap. This is typically the frequency difference between adjacent channels in th…
1.3.6.1.4.1.9.10.66.1.4.1.1.5ColumncoIfXcvrLaserFrequencyBitmapread-onlycurrentThis bitmap indicates the DWDM channel frequencies supported by the tunable laser on this interface. Bit zero of octet one corresponds to the lowest channel (r…
1.3.6.1.4.1.9.10.66.1.4.1.1.6ColumncoIfXcvrForwardLaserControlread-writecurrentThis object is used to enable or disable Forward Laser Control (FLC) on this interface. If Forward Laser Control is enabled, the laser is automatically shut do…
1.3.6.1.4.1.9.10.66.1.4.1.1.7ColumncoIfXcvrLaserSafetyControlread-writecurrentThis object is used to enable or disable Laser Safety Control (LSC) mechanisms such as Automatic Laser Shutdown (ALS) on this interface. Laser Safety Control m…
1.3.6.1.4.1.9.10.66.1.4.1.1.8ColumncoIfXcvrLSCProtocolread-writecurrentThis object identifies the Laser Safety Control protocol that is applied when coIfXcvrLaserSafetyControl is set to 'enable'. 'proprietary': Indicates that the …
1.3.6.1.4.1.9.10.66.1.4.1.1.9ColumncoIfXcvrLSCRestartModeread-writecurrentThis object selects the mechanism used to restore transmission after the fiber has been repaired or reconnected. 'automaticRestart': This mode selects automati…
1.3.6.1.4.1.9.10.66.1.4.1.1.10ColumncoIfXcvrLSCManualRestartread-writecurrentThis object initiates laser activation when the laser is shut down due to Laser Safety Control. When the value is set to 'restart', transmission of a restart p…
1.3.6.1.4.1.9.10.66.1.4.1.1.11ColumncoIfXcvrLSCPulseLengthread-writecurrentThis object specifies the length of restart pulses used to restore transmission when a Laser Safety Control protocol is activated.
1.3.6.1.4.1.9.10.66.1.4.1.1.12ColumncoIfXcvrLSCTestPulseLengthread-writecurrentThis object specifies the length of test restart pulses that are transmitted when coIfXcvrLSCManualRestart is set to 'restartForTest'.
1.3.6.1.4.1.9.10.66.1.4.1.1.13ColumncoIfXcvrLSCPulseRepetitionTimeread-writecurrentThis object specifies the delay interval between transmissions of restart pulses, when coIfXcvrLSCRestartMode is set to 'automaticRestart' and coIfXcvrLaserOpe…
1.3.6.1.4.1.9.10.66.3NodecoIfExtnMIBConformance
1.3.6.1.4.1.9.10.66.3.1NodecoIfExtnMIBCompliances
1.3.6.1.4.1.9.10.66.3.1.1CompliancecoIfExtnMIBComplianceread-onlydeprecatedThe compliance statement for the Cisco Optical Interface Extensions MIB.
1.3.6.1.4.1.9.10.66.3.1.2CompliancecoIfExtnMIBCompliance2read-onlycurrentThe compliance statement for the Cisco Optical Interface Extensions MIB.
1.3.6.1.4.1.9.10.66.3.2NodecoIfExtnMIBGroups
1.3.6.1.4.1.9.10.66.3.2.1GroupcoIfTypeExtnMIBGroupcurrentA collection of managed objects providing extensions to the interface type information found in the IF-MIB.
1.3.6.1.4.1.9.10.66.3.2.2GroupcoIfWavelengthMIBGroupcurrentA collection of managed objects providing information about the wavelength or frequency of optical interfaces.
1.3.6.1.4.1.9.10.66.3.2.3GroupcoIfDwdmChannelGroupMIBGroupcurrentA collection of managed objects providing information about DWDM channel groups.
1.3.6.1.4.1.9.10.66.3.2.4GroupcoIfXcvrBaseMIBGroupcurrentA collection of managed objects for control of transceivers (lasers and optical receivers) at optoelectronic interfaces.
1.3.6.1.4.1.9.10.66.3.2.5GroupcoIfXcvrTunableLaserMIBGroupcurrentA collection of managed objects providing information about tunable lasers.
1.3.6.1.4.1.9.10.66.3.2.6GroupcoIfXcvrLSCMIBGroupcurrentA collection of managed objects for Laser Safety Control (LSC) mechanisms such as Automatic Laser Shutdown (ALS).
Type Definitions
NameSyntaxStatusDescription
CoDwdmFrequencyUnsigned32 (1..1000000)currentThe nominal central frequency of one channel in a DWDM system, in GHz.
CoDwdmFrequencyOrZeroUnsigned32 (0..1000000)currentThe nominal central frequency of one channel in a DWDM system, in GHz, or zero. The value zero either indicates that the frequency is unknown, or indicates that this channel is uncolored.