CISCO-OPTICAL-MONITORING-MIB
20 objects
This MIB module is used to monitor optical parameters of a network element.This MIB deals with the operating parameters of the optical layer. The optical layer is a term that defines all the devices/systems that deal with the conversion of data in it's electrical form to optical form, transmission of the optical data, reception, and finally re-conversion to electrical signals.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.83 | IdentityciscoOpticalMonitoringMIB | This MIB module is used to monitor optical parameters of a network element.This MIB deals with the operating parameters of the optical layer. The optical layer… | ||
| 1.3.6.1.4.1.9.10.83.1 | NodeciscoOpticalMonMIBObjects | |||
| 1.3.6.1.4.1.9.10.83.1.1 | NodecomParameters | |||
| 1.3.6.1.4.1.9.10.83.1.1.1 | TablecomParametersTable | not-accessible | current | This table lists the instrumented parameters of all interfaces on the network element whose optical parameters are to be monitored. |
| 1.3.6.1.4.1.9.10.83.1.1.1.1 | RowcomParametersEntry | not-accessible | current | Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.1 | ColumncomTxBiasCurrent | read-only | current | This holds the value of the laser diode forward bias current for the interface being instrumented, and is an indication of the Tx optical power. |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.2 | ColumncomTxPowerSupported | read-only | current | Boolean to indicate if the interface being instrumented supports comTxPower. comTxPowerSupported is set to true if the interface supports the comTxPower object… |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.3 | ColumncomTxPower | read-only | current | This object holds the value of the transmitter optical power for the interface being instrumented. The optical is proportional to the laser diode current. This… |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.4 | ColumncomTxLaserTempSupported | read-only | current | Boolean to indicate if the interface being instrumented supports comTxLaserTemp. comTxLaserTempSupported is set to true if the interface supports the comTxLase… |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.5 | ColumncomTxLaserTemp | read-only | current | This object holds the value of the transmitter laser diode temperature for the interface being instrumented. This object indicates the health of the transmitte… |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.6 | ColumncomRxPowerACDC | read-only | current | This object holds the value of the total power (AC + DC) at the optical Rx of the interface. All values must be converted to microWatts. |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.7 | ColumncomRxPowerACSupported | read-only | current | Boolean to indicate if comRxPowerAC is supported by the interface being instrumented. comRxPowerACSupported is set to true if the interface supports the comRxP… |
| 1.3.6.1.4.1.9.10.83.1.1.1.1.8 | ColumncomRxPowerAC | read-only | current | This object holds the value of the AC power at the optical Receiver of the interface. Not all interfaces support this object.This object makes sense only if co… |
| 1.3.6.1.4.1.9.10.83.2 | NodeciscoOpticalMonMIBNotifPrefix | |||
| 1.3.6.1.4.1.9.10.83.2.0 | NodeciscoOpticalMonMIBNotifications | |||
| 1.3.6.1.4.1.9.10.83.3 | NodeciscoOpticalMonMIBConformance | |||
| 1.3.6.1.4.1.9.10.83.3.1 | NodeciscoOpticalMonMIBCompliances | |||
| 1.3.6.1.4.1.9.10.83.3.1.1 | ComplianceciscoOpticalMonMIBCompliance | current | The compliance statement for entities which implement the Cisco Optical Monitoring MIB. | |
| 1.3.6.1.4.1.9.10.83.3.2 | NodeciscoOpticalMonMIBGroups | |||
| 1.3.6.1.4.1.9.10.83.3.2.1 | GroupciscoOpticalMonMIBParamGroup | current | Parameters of the optical interfaces. |