CISCO-OPTICAL-OLC-MIB
76 objects
This MIB module defines the managed objects for optical line controller applications parameters. Max positive integer value will be displayed for NA values. Glossary: OLC : Optical Line Controller GAIN : Optical Amplifier Gain TX : Transmit RX : Receive dB : Decibel dBm : Decibel-milliwatt.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex ifName InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.1057 | IdentityciscoOpticalOlcMIB | This MIB module defines the managed objects for optical line controller applications parameters. Max positive integer value will be displayed for NA values. Gl… | ||
| 1.3.6.1.4.1.9.9.1057.1 | NodeciscoOpticalOlcMIBObjects | |||
| 1.3.6.1.4.1.9.9.1057.1.1 | NodecooOlcData | |||
| 1.3.6.1.4.1.9.9.1057.1.1.1 | TablecooOlcSpanLossTable | not-accessible | current | This table provides management information for OLC application Span Loss related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1 | RowcooOlcSpanLossEntry | not-accessible | current | An entry containing management information on OLC span loss application related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.1 | ColumncooOlcRxSpanLoss | read-only | current | This object represents the receive power span loss in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.2 | ColumncooOlcApparentRxSpanLoss | read-only | current | This object represents the apparent receive power span loss in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.3 | ColumncooOlcRxSpanLossPumpsOff | read-only | current | This object represents the receive power span loss Pumps Off in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.4 | ColumncooOlcRxSpanLossPumpsOffTimeStamp | read-only | current | This object specifies the timestamp for Rx Spanloss Pumps Off. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.5 | ColumncooOlcEstimatedRxSpanLoss | read-only | current | This object represents the estimated receive span loss in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.6 | ColumncooOlcTxSpanLoss | read-only | current | This object represents the transmit span loss in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.7 | ColumncooOlcApparentTxSpanLoss | read-only | current | This object represents the apparent transmit span loss in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.8 | ColumncooOlcTxSpanLossPumpsOff | read-only | current | This object represents the transmit span loss pumps off in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.9 | ColumncooOlcTxSpanLossPumpsOffTimeStamp | read-only | current | This object specifies the timestamp for Tx Spanloss PumpsOff. |
| 1.3.6.1.4.1.9.9.1057.1.1.1.1.10 | ColumncooOlcEstimatedTxSpanLoss | read-only | current | This object represents the estimated transmit span loss in 1/100 dB on optical OLC. |
| 1.3.6.1.4.1.9.9.1057.1.1.2 | TablecooOlcRamanTuningTable | not-accessible | current | This table provides management information for OLC Application Raman Tuning related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1 | RowcooOlcRamanTuningEntry | not-accessible | current | An entry containing management information for OLC application Raman tuning related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.1 | ColumncooOlcRamanTuningStatus | read-only | current | This object represents the OLC Raman Tuning Status. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.2 | ColumncooOlcRamanTuningBlockedReason | read-only | current | This object represents the OLC Raman Tuning blocked reason. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.3 | ColumncooOlcRamanTuningFailedReason | read-only | current | This object represents the OLC Raman Tuning fail reason. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.4 | ColumncooOlcTuningCompleteTimeStamp | read-only | current | This object represents the OLC Raman Tuning Complete timestamp. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.5 | ColumncooOlcEstimatedMaxPossibleGain | read-only | current | This object represents the estimated maximum possible GAIN in 1/100 dB. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.6 | ColumncooOlcRamanGainTarget | read-only | current | This object represents the GAIN target in 1/100 dB. |
| 1.3.6.1.4.1.9.9.1057.1.1.2.1.7 | ColumncooOlcGainAchievedOnTuningComplete | read-only | current | This object represents the achieved target in 1/100 dBm. |
| 1.3.6.1.4.1.9.9.1057.1.1.3 | TablecooOlcGainEstimatorTable | not-accessible | current | This table provides management information for OLC Gain Estimator related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1 | RowcooOlcGainEstimatorEntry | not-accessible | current | An entry containing management information of OLC optical layer gain estimator related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.1 | ColumncooOlcEgressGainEstStatus | read-only | current | This object represents the OLC Egress Gain Estimator status. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.2 | ColumncooOlcEgressEstimatedGain | read-only | current | This object represents the Egress Estimated GAIN in 1/100 dB. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.3 | ColumncooOlcEgressEstimatedGainMode | read-only | current | This object represents the OLC Egress Gain Estimator mode. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.4 | ColumncooOlcEgressGainEstTimeStamp | read-only | current | This object represents the OLC Egress Gain Estimation timestamp. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.5 | ColumncooOlcIngressGainEstStatus | read-only | current | This object represents the OLC Ingress Gain Estimator status. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.6 | ColumncooOlcIngressEstimatedGain | read-only | current | This object represents the Ingress Estimated GAIN in 1/100 dB. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.7 | ColumncooOlcIngressEstimatedGainMode | read-only | current | This object represents the OLC Ingress Gain Estimator mode. |
| 1.3.6.1.4.1.9.9.1057.1.1.3.1.8 | ColumncooOlcIngressGainEstTimeStamp | read-only | current | This object represents the OLC Ingress Gain Estimation timestamp. |
| 1.3.6.1.4.1.9.9.1057.1.1.4 | TablecooOlcApcTable | not-accessible | current | This table provides management information for OLC APC information related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1 | RowcooOlcApcEntry | not-accessible | current | An entry containing management information on OLC optical layer APC Application related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.1 | ColumncooOlcApcAgentDirection | not-accessible | current | This object represents the APC regulation info direction (TX/RX). |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.2 | ColumncooOlcApcDomainManager | read-only | current | This object represents the APC Domain manager Router ID. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.3 | ColumncooOlcApcDomainManagerState | read-only | current | This object represents the APC manager state. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.4 | ColumncooOlcApcDomainManagerBlockedReason | read-only | current | This object represents the APC Domain manager block reason. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.5 | ColumncooOlcApcInternalState | read-only | current | This object represents the APC agent internal state. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.6 | ColumncooOlcApcBlockedReason | read-only | current | This object represents the APC block reason. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.7 | ColumncooOlcApcPsdMin | read-only | current | This object represents the APC agent PSD minimum value (dBm/12.5 GHz). |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.8 | ColumncooOlcApcGainRange | read-write | current | This object represents the APC agent Gain range configured. |
| 1.3.6.1.4.1.9.9.1057.1.1.4.1.9 | ColumncooOlcApcLastCorrectionTimeStamp | read-write | current | This object represents the TimeStamp for last correction by APC. |
| 1.3.6.1.4.1.9.9.1057.1.1.5 | TablecooOlcNeighbourTable | not-accessible | current | This table provides management information for Neighbour related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.5.1 | RowcooOlcNeighbourEntry | not-accessible | current | An entry containing management information on OLC optical layer neighbour information. |
| 1.3.6.1.4.1.9.9.1057.1.1.5.1.1 | ColumncooOlcNbrIpAddr | read-only | current | This object represents the neighbour IP address. |
| 1.3.6.1.4.1.9.9.1057.1.1.5.1.2 | ColumncooOlcNbrInterface | read-only | current | This object represents the neighbour interface name. |
| 1.3.6.1.4.1.9.9.1057.1.1.6 | TablecooOlcPartnerTable | not-accessible | current | This table provides management information for Partner related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.6.1 | RowcooOlcPartnerEntry | not-accessible | current | An entry containing management information on OLC optical layer partner information. |
| 1.3.6.1.4.1.9.9.1057.1.1.6.1.1 | ColumncooOlcPartnerIpAddr | read-only | current | This object represents the partner IP address. |
| 1.3.6.1.4.1.9.9.1057.1.1.6.1.2 | ColumncooOlcPartnerInterface | read-only | current | This object represents the partner interface name. |
| 1.3.6.1.4.1.9.9.1057.1.1.7 | TablecooOlcPartnerBandLossTable | not-accessible | current | This table provides management information for OLC Partner Band Loss information related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.7.1 | RowcooOlcPartnerBandLossEntry | not-accessible | current | An entry containing management information on OLC optical layer partner band loss related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.7.1.1 | ColumncooOlcPathLoss | read-only | current | This object represents the OLC Partner Path Loss in 1/100 dB. |
| 1.3.6.1.4.1.9.9.1057.1.1.7.1.2 | ColumncooOlcPatchcordLoss | read-only | current | This object represents the OLC Partner Patchcord Loss in 1/100 dB. |
| 1.3.6.1.4.1.9.9.1057.1.1.7.1.3 | ColumncooOlcLossMeasurementTimeStamp | read-write | current | This object represents the TimeStamp of Path and Patchord losses calculation. |
| 1.3.6.1.4.1.9.9.1057.1.1.8 | TablecooOlcBandStatusTable | not-accessible | current | This table provides management information for OLC Band Status information related attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.8.1 | RowcooOlcBandStatusEntry | not-accessible | current | An entry containing management information on OLC optical layer band status attributes. |
| 1.3.6.1.4.1.9.9.1057.1.1.8.1.1 | ColumncooOlcNodeNum | not-accessible | current | This object represents Olc Node RID number. |
| 1.3.6.1.4.1.9.9.1057.1.1.8.1.2 | ColumncooOlcNodeRID | read-only | current | This object represents OSPF RID IP address. |
| 1.3.6.1.4.1.9.9.1057.1.1.8.1.3 | ColumncooOlcBandStatus | read-only | current | This object represents the Band Status. |
| 1.3.6.1.4.1.9.9.1057.1.1.8.1.4 | ColumncooOlcBandPSD | read-only | current | This object represents the Band PSD Type. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoOpticalOlcApcAgentDirection | INTEGER { transmit (1), receive (2) } | current | This value indicates the APC agent direction. Valid values are - Transmit (1) : APC agent in TX direction. Receive(2) : APC agent in RX direction |
| CiscoOpticalOlcApcBlockReason | INTEGER { hw-fail(1), edfa-shutdown(2), apr-enabled(3), user-disabled(4), edfa-apr(5), gain-estimation-in-progress(6), band-failure(7), partial-topology(8), node-blocked(9) } | current | This value indicates the Apc block reason. Valid values are - hw-fail(1) : APC is blocked due to node reporting hardware failure. edfa-shutdown(2) : APC is blocked due to EDFA shutdown on node. apr-enabled(3) : APC is b… |
| CiscoOpticalOlcApcInternalState | INTEGER { blocked (1), idle (2), oor (3), discrepancy (4), correcting (5), channel-startup (6) } | current | This value indicates the APC agent internal state. Valid values are - blocked(1) : APC node is Blocked. idle (2) : APC node in Idle state. oor (3) : APC node in Out Of Range state. discrepancy (4) : APC node reporting D… |
| CiscoOpticalOlcApcManagerState | INTEGER { disabled (1), idle (2), blocked (3), working (4), enable (5), paused (6) } | current | This value indicates the APC manager state. Valid values are - disabled(1) : APC current state is Disabled. idle (2) : APC current state is Idle. blocked (3) : APC current state is Blocked. working (4) : APC current sta… |
| CiscoOpticalOlcBandPSDType | INTEGER { unknown-band-psd(1), single-band-psd(2), dual-band-psd(3) } | current | This value indicates the PSD type. Valid values are - unknown-band-psd(1) : Unknown Configured PSD for Single Band single-band-psd(2) : Configured PSD for Single Band dual-band-psd(3) : Configured PSD for Dual Band |
| CiscoOpticalOlcBandStatus | INTEGER { unknown(1), active(2), failed(3), recovering(4) } | current | This value indicates the band status. Valid values are - unknown(1) : Band in Unknown status active(2) : Band in Active status failed(3) : Band in Failed status recovering(4) : Band in Recovering status |
| CiscoOpticalOlcGainEstStatus | INTEGER { blocked (1), disabled( 2), operational(3), idle (4) } | current | This value indicates the Status of Gain Estimator Application. Valid values are - blocked(1) : Gain Estimator current state is Blocked. disabled(2) : Gain Estimator current state is Disabled. operational(3) : Gain Estim… |
| CiscoOpticalOlcGainInDb | Integer32 | current | This value represent the gain setting. An integer value that represents the gain level in 1/100ths of dB. Example: The value 800 represents an gain level of 8.0 dB. |
| CiscoOpticalOlcPower | Integer32 | current | This value indicates the optical power value. An integer value that represents the power in 1/100ths of dB. Example: The value 800 represents a power of 8.0 dB. |
| CiscoOpticalOlcPSDInDbm | Integer32 (-4000..2300) | current | This value represent the power spectral density. An integer value that represents the power spectral density in 1/100ths of dBm. Example: The value 800 represents a PSD Value of 8.0 dBm per 12.5GHz. |
| CiscoOpticalOlcRamanTuningFailReason | INTEGER { measurement(1), calculation(2), optimization(3) } | current | This value indicates the Raman Tuning fail reason. Valid values are - measurement(1) : Raman-Tuning has failed because of failure in measurement collection. calculation(2) : Raman-Tuning has failed because of failure in… |
| CiscoOpticalOlcRamanTuningStatus | INTEGER { startup(1), disabled(2), blocked(3), failed(4), measurementInProgress(5), calculationInProgress(6), optimizationInProgress(7), tuned(8) } | current | This value indicates the Raman Tuning Status. Valid values are - startup(1) : Raman-Tuning current state is in startup. disabled(2) : Raman-Tuning current state is Disabled. blocked(3) : Raman-Tuning current state is Bl… |