MIB Viewer

CISCO-OSCP-MIB

49 objects
The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wavelength connectivity with remote nodes. OSCP includes support for bundles of wavelengths to a common remote node, including dynamic selection of the message channel on one wavelength to carry control and management traffic for the entire wavelength bundle.
Imported Objects
CISCO-SMIciscoMgmt
IF-MIBInterfaceIndex
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.202IdentityciscoOscpMIBThe MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wavelength connectivity with remo…
1.3.6.1.4.1.9.9.202.1NodeciscoOscpMIBObjects
1.3.6.1.4.1.9.9.202.1.1NodeciscoOscpBaseGroup
1.3.6.1.4.1.9.9.202.1.1.1ScalarcoscpHighestVersionread-onlycurrentThe highest version of OSCP that the software in this switch is capable of executing. If the version of a received hello packet is greater than coscpHighestVer…
1.3.6.1.4.1.9.9.202.1.1.2ScalarcoscpLowestVersionread-onlycurrentThe lowest version of OSCP that the software in this switch is capable of executing. If the version of a received hello packet is smaller than coscpLowestVersi…
1.3.6.1.4.1.9.9.202.1.1.3ScalarcoscpSwitchIdread-writecurrentThe value this switch is using to represent itself as a network node. This should be a globally unique identifier. Typically this value is a MAC address precon…
1.3.6.1.4.1.9.9.202.1.1.4ScalarcoscpPriorityChangeModeread-writecurrentThis value defines how OSCP will react to a change in the configured value of coscpLinkSelPriority. If the value is set to 'immediate', the reevaluation of the…
1.3.6.1.4.1.9.9.202.1.1.5ScalarcoscpHelloHoldDownread-writecurrentIn OSCP, some hello packets are generated periodically while others are triggered by events. Specifically, event-triggered hellos are sent upon every state cha…
1.3.6.1.4.1.9.9.202.1.1.6ScalarcoscpHelloIntervalread-writecurrentThe average time interval between successive hellos sent by this switch on each link running OSCP, in the absence of triggered hellos.
1.3.6.1.4.1.9.9.202.1.1.7ScalarcoscpHelloInactivityFactorread-writecurrentThe value for the Hello Inactivity factor that this switch will use to determine when a link has gone down. A link will be returned to the 'attempt' state if t…
1.3.6.1.4.1.9.9.202.1.1.8ScalarcoscpNotifiesEnabledread-writecurrentNotifications that OSCP has gone down on a link are enabled if this value is set to 'true'.
1.3.6.1.4.1.9.9.202.1.2TablecoscpLinkTablenot-accessiblecurrentThis table contains the objects necessary to describe the operation of OSCP over wavelengths that terminate at this switch. There is one entry for each wavelen…
1.3.6.1.4.1.9.9.202.1.2.1RowcoscpLinkEntrynot-accessiblecurrentAn entry in the table, containing information about a link attached to a switch running OSCP.
1.3.6.1.4.1.9.9.202.1.2.1.1ColumncoscpLinkPortIdnot-accessiblecurrentThe Port Identifier of the link as selected by the local switch. This value has meaning only within the context of the switch to which the port is attached. Th…
1.3.6.1.4.1.9.9.202.1.2.1.2ColumncoscpLinkTyperead-onlycurrentThis object indicates the type of link being described. A link type of 'dedicatedWavelength' represents a wavelength that is dedicated to carrying control and …
1.3.6.1.4.1.9.9.202.1.2.1.3ColumncoscpLinkVersionread-onlycurrentThis object indicates the version of OSCP used to exchange information over this link. If communication with the remote switch has not yet been established, th…
1.3.6.1.4.1.9.9.202.1.2.1.4ColumncoscpLinkHelloStateread-onlycurrentThis object indicates the state of the Hello protocol exchange over this link. The 'down' state is the initial state of the OSCP Hello finite state machine. Th…
1.3.6.1.4.1.9.9.202.1.2.1.5ColumncoscpLinkRemoteSwitchIdread-onlycurrentThis object indicates the switch identifier of the remote switch on the other end of the link.
1.3.6.1.4.1.9.9.202.1.2.1.6ColumncoscpLinkRemotePortIdread-onlycurrentThis object indicates the port identifier of the port at the remote end of the link as assigned by the remote switch.
1.3.6.1.4.1.9.9.202.1.2.1.7ColumncoscpLinkDerivedBundleIdread-onlycurrentThis object identifies the wavelength bundle to the remote switch that this link belongs to. All links with the same value of coscpLinkRemoteSwitchId and the s…
1.3.6.1.4.1.9.9.202.1.2.1.8ColumncoscpLinkConfigBundleIdread-writecurrentThis object specifies the identifier of the wavelength bundle to the remote switch configured for this link. The configured bundle identifier is carried in the…
1.3.6.1.4.1.9.9.202.1.2.1.9ColumncoscpLinkIfIndexread-onlycurrentThe interface index identifying this link.
1.3.6.1.4.1.9.9.202.1.2.1.10ColumncoscpLinkSelPriorityread-writecurrentThis object indicates the priority with which this link gets selected as the active Optical Supervisory Channel (OSC) when multiple links are present in the sa…
1.3.6.1.4.1.9.9.202.1.2.1.11ColumncoscpLinkInHellosread-onlycurrentThis object contains a count of the number of Hello packets received over this link.
1.3.6.1.4.1.9.9.202.1.2.1.12ColumncoscpLinkInDiscardedHellosread-onlycurrentThis object contains a count of the number of Hello packets received over this link that were discarded since the version of the received Hello packet was outs…
1.3.6.1.4.1.9.9.202.1.2.1.13ColumncoscpLinkOutHellosread-onlycurrentThis object contains a count of the number of Hello packets transmitted over this link.
1.3.6.1.4.1.9.9.202.1.2.1.14ColumncoscpLinkTransDownread-onlycurrentThis object contains a count of the number of times this link transitioned from the 'twoWay' state to a hello state other than 'twoWay'.
1.3.6.1.4.1.9.9.202.1.3TablecoscpBundleTablenot-accessiblecurrentThis table contains objects describing the wavelength bundles on this switch.
1.3.6.1.4.1.9.9.202.1.3.1RowcoscpBundleEntrynot-accessiblecurrentEach entry contains information about one wavelength bundle to one remote switch. The wavelength bundle is modeled as a single logical link (identified by cosc…
1.3.6.1.4.1.9.9.202.1.3.1.1ColumncoscpBundleRemoteSwitchIdnot-accessiblecurrentThe switch identifier of the remote switch.
1.3.6.1.4.1.9.9.202.1.3.1.2ColumncoscpBundleIdnot-accessiblecurrentThe bundle identifier value used to distinguish this wavelength bundle from other wavelength bundles to the same remote switch. All entries in coscpLinkTable w…
1.3.6.1.4.1.9.9.202.1.3.1.3ColumncoscpBundleActivePortIdread-onlycurrentThe port identifier of the link currently selected as the active OSC. This link is used to transmit all OSC control and network management traffic to the remot…
1.3.6.1.4.1.9.9.202.1.3.1.4ColumncoscpBundleIfIndexread-onlycurrentThe interface index assigned by the agent to represent the OSC for the wavelength bundle.
1.3.6.1.4.1.9.9.202.1.3.1.5ColumncoscpBundlePortCountread-onlycurrentA count of the total number of component links in the wavelength bundle that have coscpLinkHelloState value 'twoWay'.
1.3.6.1.4.1.9.9.202.1.3.1.6ColumncoscpBundleRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. Each row in the table must be created using this object. Once the…
1.3.6.1.4.1.9.9.202.2NodeciscoOscpMIBNotifications
1.3.6.1.4.1.9.9.202.2.0NodeciscoOscpNotificationsPrefix
1.3.6.1.4.1.9.9.202.2.0.1NotificationcoscpNotifyTransDowncurrentA coscpNotifyTransDown notification is sent when the value of an instance of coscpTransDown increments. This indicates that a link exited the 'twoWay' state an…
1.3.6.1.4.1.9.9.202.3NodeciscoOscpMIBConformance
1.3.6.1.4.1.9.9.202.3.1NodeciscoOscpMIBCompliances
1.3.6.1.4.1.9.9.202.3.1.1ComplianceciscoOscpMIBComplianceread-onlycurrentThe compliance statement for entities which implement the Cisco OSCP MIB.
1.3.6.1.4.1.9.9.202.3.2NodeciscoOscpMIBGroups
1.3.6.1.4.1.9.9.202.3.2.1GroupciscoOscpBasicGroupcurrentA collection of cisco specific MIB objects used for management of OSCP.
1.3.6.1.4.1.9.9.202.3.2.2GroupciscoOscpBundleGroupcurrentA collection of cisco specific MIB objects used for management of wavelength bundles to a common remote node that are controlled by OSCP.
1.3.6.1.4.1.9.9.202.3.2.3GroupciscoOscpNotificationsGroupcurrentA collection of cisco specific notifications used for management of OSCP.
Type Definitions
NameSyntaxStatusDescription
CoscpBundleIdUnsigned32 (0..255)currentAn OSCP bundling identifier - this is used to determine which wavelengths to a given remote switch are to be aggregated and treated as a single logical link with a single control channel. This control channel is called …
CoscpPortIdUnsigned32currentAn OSCP port ID - this is used to identify a point of attachment of an optical wavelength to a given switch. The distinguished value 0 indicates that no port is specified. The terms link and wavelength are used intercha…
CoscpSwitchIdOCTET STRING (SIZE(6))currentA switch identifier - this is used to identify the originator and recipient of the OSCP hello packets. A valid switch identifier has a value different than all zeros. A switch identifier value of all zeros indicates tha…
CoscpVersionINTEGER { unknown(1), version1(2) }currentIndicates a version of OSCP.