CISCO-PAGP-MIB
58 objects
The MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features allow two or more physical interfaces to be aggregated together to form a single agport. This agport behaves like a single interface with improved bandwidth and/or availability over each of its component physical interfaces. You can monitor interfaces, agports, and related statistics through the ifStackTable and ifTable entries.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | InterfaceIndexOrZero |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.98 | IdentityciscoPagpMIB | The MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features allow two or more physical inte… | ||
| 1.3.6.1.4.1.9.9.98.1 | NodeciscoPagpMIBObjects | |||
| 1.3.6.1.4.1.9.9.98.1.1 | NodepagpGroupCapabilityConfiguration | |||
| 1.3.6.1.4.1.9.9.98.1.1.1 | TablepagpEtherChannelTable | not-accessible | current | The pagpEtherChannelTable specifies, per physical interface, the Fast Etherchannel operational mode (off, manual, or protocol-controlled) and the capability of… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1 | RowpagpEtherChannelEntry | not-accessible | current | The entry describes the permitted interface aggregation. Entries are created by the managed system for each interface which supports Fast Etherchannel. |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.1 | ColumnpagpEthcOperationMode | read-write | current | The managed device will refuse a request to set pagpEthcOperationMode to the pagpOn(3) state if the device does not implement the PAgP protocol. The managed de… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.2 | ColumnpagpDeviceId | read-only | current | Uniquely identifies a device which implements Fast Etherchannel. The combination of pagpDeviceId and ifIndex must be unique over all interfaces in a network. p… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.3 | ColumnpagpPhysGroupCapability | read-only | current | The values in pagpPhysGroupCapability indicate the aggregation capability of the underlying hardware. The speed, configuration, and status condition of the int… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.4 | ColumnpagpOperGroupCapability | read-only | current | This variable informs the system administrator examining the Fast Etherchannel MIB of the capabilities of the current state of the interface's hardware to form… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.5 | ColumnpagpAdminGroupCapability | read-write | current | pagpAdminGroupCapability is used by the network administrator to control the aggregation of interfaces into agports. The default value of pagpAdminGroupCapabil… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.6 | ColumnpagpPortPriority | read-write | current | The priority of this interface relative to other interfaces when determining which interface is to be used in Hot Standby mode. Among all interfaces aggregated… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.7 | ColumnpagpLearnMethod | read-write | current | This interface's learning method value. Specifies whether this device is able to learn the location of a source MAC address based on the agport on which it was… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.8 | ColumnpagpGroupIfIndex | read-only | current | If pagpGroupIfIndex is 0, then the inteface is not aggregated to an agport, and is unavailable for normal data reception and transmission. If pagpGroupIfIndex … |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.9 | ColumnpagpDistributionProtocol | read-write | current | pagpDistributionProtocol controls the load balancing algorithms used on this interface's agport to distribute outgoing data frames among its component interfac… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.10 | ColumnpagpDistributionAddress | read-write | current | pagpDistributionAddress controls the type of distribution on the configured pagpDistributionProtocol used on this interface's agport to distribute outgoing dat… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.11 | ColumnpagpRate | read-write | current | Specifies the rate at which the PAgP packets are transmitted on this interface. fast(1) : PAgP packets are transmitted at the fast rate on this interface. norm… |
| 1.3.6.1.4.1.9.9.98.1.1.1.1.12 | ColumnpagpInPacketTimeout | read-write | current | Specifies the earliest time at which received PAgP information packets are timed out. |
| 1.3.6.1.4.1.9.9.98.1.2 | NodepagpProtocol | |||
| 1.3.6.1.4.1.9.9.98.1.2.1 | TablepagpProtocolConfigTable | not-accessible | current | The table of per-interface Port Aggregation Protocol variables. Physical interfaces that support Fast Etherchannel and PAgP protocol have an entry in this tabl… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1 | RowpagpProtocolConfigEntry | not-accessible | current | The entry describes the operational state of the PAgP protocol on a particular physical interface. Entries in this table are for interfaces that support both F… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.1 | ColumnpagpOperationMode | read-write | current | Controls the operational mode of the PAgP protocol on this interface. |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.2 | ColumnpagpPortState | read-only | current | The state of the PAgP state machine on this interface. Values: portDown(1) - interface's ifOperStatus is not Up; portUp(2) - interface's ifOperStatus is Up, no… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.3 | ColumnpagpLastStateChange | read-only | current | Value of sysUpTime the last time that pagpPortState changed. |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.4 | ColumnpagpHelloFrequency | read-only | current | If pagpHelloFrequency is slow(2), this device uses a 105 second timer on this interface to time out receipt of PAgP packet. If fast(1), this device uses a 3.5 … |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.5 | ColumnpagpDistributionAlgorithm | read-only | current | pagpDistributionAlgorithm describes, in human terms, the method used on this interface's agport to distribute outgoing data frames among its component interfac… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.6 | ColumnpagpPartnerCount | read-only | current | The number of other devices known to be transmitting PAgP packets to this device on this physical interface. If pagpPartnerCount contains none(1), then the val… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.7 | ColumnpagpPartnerDeviceId | read-only | current | MAC Address of the partner, obtained from the PAgP packet last received on this interface. Contains all 0 if pagpPartnerCount contains none(1). |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.8 | ColumnpagpPartnerLearnMethod | read-only | current | The value of the partner's pagpLearnMethod value, obtained from the PAgP packet last received on this interface. undefined(3) if pagpPartnerCount contains none… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.9 | ColumnpagpPartnerPortPriority | read-only | current | The value of the partner's pagpPortPriority, obtained from the PAgP packet last received on this interface. 0 if pagpPartnerCount contains none(1). |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.10 | ColumnpagpPartnerIfIndex | read-only | current | The value of the partner's ifIndex value, obtained from the PAgP packet last received on this interface. 0 if pagpPartnerCount contains none(1). Use CISCO-CDP-… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.11 | ColumnpagpPartnerGroupCapability | read-only | current | The value of the partner's pagpOperGroupCapability obtained from the PAgP packet last received on this interface. 0 if pagpPartnerCount contains none(1) |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.12 | ColumnpagpPartnerGroupIfIndex | read-only | current | The value of the partner's pagpGroupIfIndex obtained from the PAgP packet last received on this interface. 0 if pagpPartnerCount contains none(1). |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.13 | ColumnpagpPartnerDeviceName | read-only | current | The DisplayString obtained from the PAgP packet last received on this interface. 0-length string if pagpPartnerCount contains none(1), or if no device name has… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.14 | ColumnpagpPartnerPortName | read-only | current | The DisplayString obtained from the PAgP packet last received on this interface. 0-length string if pagpPartnerCount contains none(1), or if no port name has b… |
| 1.3.6.1.4.1.9.9.98.1.2.1.1.15 | ColumnpagpPartnerAgportMACAddress | read-only | current | The MacAddress obtained from the PAgP packet last received on this interface. All 0 if pagpPartnerCount contains none(1) or if no agport MacAddress has been re… |
| 1.3.6.1.4.1.9.9.98.1.2.2 | TablepagpProtocolStatsTable | not-accessible | current | The table of per-interface Port Aggregation Protocol statistics. The entries in this table are present only on an interface that is capable both of implementin… |
| 1.3.6.1.4.1.9.9.98.1.2.2.1 | RowpagpProtocolStatsEntry | not-accessible | current | The entry describes the accumulated statistics of the PAgP protocol operation on the aggregated interface. |
| 1.3.6.1.4.1.9.9.98.1.2.2.1.3 | ColumnpagpInPackets | read-only | current | Number of PAgP information packets received on this interface. |
| 1.3.6.1.4.1.9.9.98.1.2.2.1.4 | ColumnpagpOutPackets | read-only | current | Number of PAgP information packets transmitted on this interface. |
| 1.3.6.1.4.1.9.9.98.1.2.2.1.5 | ColumnpagpInFlushes | read-only | current | Number of PAgP flush packets received and echoed on this interface not matching any pagpDeviceId belonging to the managed device. This counts PAgP flush packet… |
| 1.3.6.1.4.1.9.9.98.1.2.2.1.6 | ColumnpagpReturnedFlushes | read-only | current | Number of PAgP flush packets received on this interface matching some pagpDeviceId belonging to this device. This counts PAgP flush packets which were originat… |
| 1.3.6.1.4.1.9.9.98.1.2.2.1.7 | ColumnpagpOutFlushes | read-only | current | Number of PAgP flush packets generated on this interface. Does not count flush packets counted in pagpInFlushes and returned to the sender. If pagpOutFlushes i… |
| 1.3.6.1.4.1.9.9.98.1.2.2.1.8 | ColumnpagpInErrors | read-only | current | Number of packet received on this interface which were identified by the encapsulation as being PAgP packets (of any type, e.g. information or flush), but whic… |
| 1.3.6.1.4.1.9.9.98.3 | NodeciscoPagpMIBConformance | |||
| 1.3.6.1.4.1.9.9.98.3.1 | NodeciscoPagpMIBCompliances | |||
| 1.3.6.1.4.1.9.9.98.3.1.1 | ComplianceciscoPagpMIBComplianceV1R1 | obsolete | Conformance statement for the Fast Ethernet and Port Aggregation Protocol MIB. | |
| 1.3.6.1.4.1.9.9.98.3.1.2 | ComplianceciscoPagpMIBComplianceV2R2 | deprecated | Conformance statement for the Fast Ethernet and Port Aggregation Protocol MIB. | |
| 1.3.6.1.4.1.9.9.98.3.1.3 | ComplianceciscoPagpMIBComplianceV3R3 | current | Conformance statement for the Fast Ethernet and Port Aggregation Protocol MIB. | |
| 1.3.6.1.4.1.9.9.98.3.2 | NodeciscoPagpMIBGroups | |||
| 1.3.6.1.4.1.9.9.98.3.2.1 | GroupciscoPagpEthcGroupV1R1 | obsolete | The collection of objects which are used to configure and monitor the Fast Etherchannel operation and interface group-capability. | |
| 1.3.6.1.4.1.9.9.98.3.2.2 | GroupciscoPagpPagpGroupV1R1 | current | The collection of objects which are used to configure and monitor the Port Aggregation Protocol (PAgP) for the automatic negotiation and configuration of Fast … | |
| 1.3.6.1.4.1.9.9.98.3.2.3 | GroupciscoPagpEthcGroupV2R2 | current | The collection of objects which are used to configure and monitor the Fast Etherchannel operation and interface group-capability. | |
| 1.3.6.1.4.1.9.9.98.3.2.4 | GroupciscoPagpRateAndTimeOutGroup | current | A collection of objects which provide the information about rate and timeout configuration for PAgP protocol on capable interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PagpEthcOperationMode | INTEGER { off(1), manual(2), pagpOn(3) } | current | The group-capability configuration operation mode of Fast Etherchannel on this interface: off(1) No aggregation of interfaces is allowed. manual(2) Aggregation is under control of the pagpGroupCapabilityConfiguration se… |
| PagpGroupCapability | Integer32 | current | The group-capability value of an interface. Indicates the ability of the interface to aggregate together with other interfaces to form aggregate links, or agports. The value of PagpGroupCapability has no meaning except … |
| PagpLearnMethod | INTEGER { physPort(1), agPort(2), undefined(3) } | current | Indicates the ability of this device to determine the input interface of an incoming data packet received on an aggregated interface. This serves as a request to the sending device for the use or avoidance of different … |
| PagpOperationMode | INTEGER { desirable(1), desirableSilent(2), automatic(3), automaticSilent(4) } | current | The group-capability configuration operation mode of the PAgP protocol on this interface: desirable(1) aggregation is under control of the PAgP protocol. PAgP packets are sent on the interface and those received are act… |
| PagpPortPriority | INTEGER (0..255) | current | The priority of this interface for use as the active port of an aggregation operating in hot-standby mode. The highest numerical value indicates the most-desirable interface. |