MIB Viewer

CISCO-PING-MIB

32 objects
Modified description of ciscoPingAddress object.
Imported Objects
CISCO-SMIciscoMgmt
CISCO-TCCiscoNetworkAddress CiscoNetworkProtocol
IF-MIBOwnerString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCRowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.16IdentityciscoPingMIBModified description of ciscoPingAddress object.
1.3.6.1.4.1.9.9.16.1NodeciscoPingMIBObjects
1.3.6.1.4.1.9.9.16.1.1TableciscoPingTablenot-accessiblecurrentA table of ping request entries.
1.3.6.1.4.1.9.9.16.1.1.1RowciscoPingEntrynot-accessiblecurrentA ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this spars…
1.3.6.1.4.1.9.9.16.1.1.1.1ColumnciscoPingSerialNumbernot-accessiblecurrentObject which specifies a unique entry in the ciscoPingTable. A management station wishing to initiate a ping operation should use a pseudo-random value for thi…
1.3.6.1.4.1.9.9.16.1.1.1.2ColumnciscoPingProtocolread-createcurrentThe protocol to use. Once an instance of this object is created, its value can not be changed.
1.3.6.1.4.1.9.9.16.1.1.1.3ColumnciscoPingAddressread-createcurrentThe address of the device to be pinged. An instance of this object cannot be created until the associated instance of ciscoPingProtocol is created.
1.3.6.1.4.1.9.9.16.1.1.1.4ColumnciscoPingPacketCountread-createcurrentSpecifies the number of ping packets to send to the target in this sequence.
1.3.6.1.4.1.9.9.16.1.1.1.5ColumnciscoPingPacketSizeread-createcurrentSpecifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are protocol-dependent. An instance of…
1.3.6.1.4.1.9.9.16.1.1.1.6ColumnciscoPingPacketTimeoutread-createcurrentSpecifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.'
1.3.6.1.4.1.9.9.16.1.1.1.7ColumnciscoPingDelayread-createcurrentSpecifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response or declaring a timeout for a previous pack…
1.3.6.1.4.1.9.9.16.1.1.1.8ColumnciscoPingTrapOnCompletionread-createcurrentSpecifies whether or not a ciscoPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, it is the responsibilit…
1.3.6.1.4.1.9.9.16.1.1.1.9ColumnciscoPingSentPacketsread-onlycurrentThe number of ping packets that have been sent to the target in this sequence.
1.3.6.1.4.1.9.9.16.1.1.1.10ColumnciscoPingReceivedPacketsread-onlycurrentThe number of ping packets that have been received from the target in this sequence.
1.3.6.1.4.1.9.9.16.1.1.1.11ColumnciscoPingMinRttread-onlycurrentThe minimum round trip time of all the packets that have been sent in this sequence. This object will not be created until the first ping response in a sequenc…
1.3.6.1.4.1.9.9.16.1.1.1.12ColumnciscoPingAvgRttread-onlycurrentThe average round trip time of all the packets that have been sent in this sequence. This object will not be created until the first ping response in a sequenc…
1.3.6.1.4.1.9.9.16.1.1.1.13ColumnciscoPingMaxRttread-onlycurrentThe maximum round trip time of all the packets that have been sent in this sequence. This object will not be created until the first ping response in a sequenc…
1.3.6.1.4.1.9.9.16.1.1.1.14ColumnciscoPingCompletedread-onlycurrentSet to true when all the packets in this sequence have been either responded to or timed out.
1.3.6.1.4.1.9.9.16.1.1.1.15ColumnciscoPingEntryOwnerread-createcurrentThe entity that configured this entry.
1.3.6.1.4.1.9.9.16.1.1.1.16ColumnciscoPingEntryStatusread-createcurrentThe status of this table entry. Once the entry status is set to active, the associate entry cannot be modified until the sequence completes (ciscoPingCompleted…
1.3.6.1.4.1.9.9.16.1.1.1.17ColumnciscoPingVrfNameread-createcurrentThis field is used to specify the VPN name in which the ping will be used. For regular ping this field should not be configured. The agent will use this field …
1.3.6.1.4.1.9.9.16.2NodeciscoPingMIBTrapPrefix
1.3.6.1.4.1.9.9.16.2.0NodeciscoPingMIBTraps
1.3.6.1.4.1.9.9.16.2.0.1NotificationciscoPingCompletioncurrentA ciscoPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated. In addition to the abo…
1.3.6.1.4.1.9.9.16.3NodeciscoPingMIBConformance
1.3.6.1.4.1.9.9.16.3.1NodeciscoPingMIBCompliances
1.3.6.1.4.1.9.9.16.3.1.1ComplianceciscoPingMIBComplianceobsoleteThe compliance statement for entities which implement the Cisco Ping MIB
1.3.6.1.4.1.9.9.16.3.1.2ComplianceciscoPingMIBComplianceVpncurrentThe compliance statement for entities which implement the Cisco Ping MIB
1.3.6.1.4.1.9.9.16.3.2NodeciscoPingMIBGroups
1.3.6.1.4.1.9.9.16.3.2.1GroupciscoPingMIBGroupobsoleteA collection of objects providing ping (echo) ability to a Cisco agent.
1.3.6.1.4.1.9.9.16.3.2.2GroupciscoPingMIBGroupVpncurrentA collection of objects providing ping (echo) ability to a Cisco agent.
1.3.6.1.4.1.9.9.16.3.2.3GroupciscoPingMIBNotificationGroupcurrentSet of notifications implemented in this module.