CISCO-PORT-CHANNEL-MIB
45 objects
The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will also contain entries for Port Channel ports.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | PortMemberList |
| IF-MIB | ifIndex InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.285 | IdentityciscoPortChannelMIB | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will also contain entries for Port Ch… | ||
| 1.3.6.1.4.1.9.9.285.1 | NodeciscoPortChannelObjects | |||
| 1.3.6.1.4.1.9.9.285.1.1 | NodeportChannelConfig | |||
| 1.3.6.1.4.1.9.9.285.1.1.1 | TableportChannelTable | not-accessible | current | This table facilitates the creation and deletion of a Port Channel interface to achieve higher bandwidths than just one E_port. More than one E_port can be a m… |
| 1.3.6.1.4.1.9.9.285.1.1.1.1 | RowportChannelEntry | not-accessible | current | There is one entry in this table for each created Port Channel port. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.1 | ColumnportChannelIndex | not-accessible | current | An index that uniquely identifies an entry in the portChannelTable table. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.2 | ColumnportChannelIfIndex | read-only | current | The ifIndex of this interface. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.3 | ColumnportChannelAdminChannelMode | read-create | current | The channel mode desired by the network manager. If this object is configured to be auto(1), then the 'portChannelOperChannelMode' will show the current operat… |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.4 | ColumnportChannelOperChannelMode | read-only | current | The current operating channel mode of the port. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.5 | ColumnportChannelAddType | read-create | current | The method to be adopted by the agent to add port(s) to a Port Channel port. If normal(1), then a compatibility check is done on the parameters of the port(s) … |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.6 | ColumnportChannelLastActionStatus | read-only | current | The status of the last operation (add or remove a member) done to change the member list of a Port Channel Port. When no ports are added or the last operation … |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.7 | ColumnportChannelLastActionStatusCause | read-only | current | The cause of failure to last operation (add or remove a member) done to change the member list of a Port Channel port. This object will be zero length string i… |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.8 | ColumnportChannelLastActionTime | read-only | current | The timestamp indicating the time of last action performed on this entry. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.9 | ColumnportChannelMemberList | read-create | current | The list of ifIndex's of the E_ports that are members of this Port Channel port. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.10 | ColumnportChannelCreationTime | read-only | current | The timestamp of this entry's creation time. Note that at this creation time, a discontinuity occurs in the statistic/error counters which are defined in CISCO… |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.11 | ColumnportChannelRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.9.9.285.1.1.1.1.12 | ColumnportChannelMemberOperStatus | read-only | current | The list of port channel forwarding status of the E_ports that are members of this Port Channel port. Every four-byte is a status of the corresponding member p… |
| 1.3.6.1.4.1.9.9.285.1.1.2 | ScalarportChannelProtocolEnable | read-write | current | Enables/disables Port Channel Protocol. If enabled, Port Channel Protocol provides following features: - detection and correction of mis-configurations of inte… |
| 1.3.6.1.4.1.9.9.285.1.1.3 | TableportChannelGrpIfExtTable | not-accessible | current | This table facilitates Channel Group specific interface configurations. |
| 1.3.6.1.4.1.9.9.285.1.1.3.1 | RowportChannelGrpIfExtEntry | not-accessible | current | There is one entry in this table for each created Port Channel port. |
| 1.3.6.1.4.1.9.9.285.1.1.3.1.1 | ColumnportChannelGrpIfAutoCreation | read-write | current | This object indicates if this interface may be part of automatically created Channel Groups (and therefore Port Channels). |
| 1.3.6.1.4.1.9.9.285.1.1.4 | TableportChannelExtTable | not-accessible | current | This table extends the portChannelTable to support Port Channel Protocol. |
| 1.3.6.1.4.1.9.9.285.1.1.4.1 | RowportChannelExtEntry | not-accessible | current | There is one entry in this table for each created Port Channel port. It contains an entry for every Port Channel that is either automatically created or manual… |
| 1.3.6.1.4.1.9.9.285.1.1.4.1.1 | ColumnportChannelExtChannelGrpMode | read-write | current | The admin channel group mode of this port channel. |
| 1.3.6.1.4.1.9.9.285.1.1.4.1.2 | ColumnportChannelExtAutoCreated | read-only | current | Indicates of this port channel was automatically created. Note that this object is valid only for Fibre Channel port channels. |
| 1.3.6.1.4.1.9.9.285.1.1.4.1.3 | ColumnportChannelExtPersistent | read-write | current | This object converts an auto-created port channel to a persistent port channel when it is set to 'enable'. No action is taken if this object is set to 'noOp'. … |
| 1.3.6.1.4.1.9.9.285.1.1.4.1.4 | ColumnportChannelExtOperChannelGrpMode | read-only | current | The operational channel group mode of this port channel. |
| 1.3.6.1.4.1.9.9.285.1.1.4.1.5 | ColumnportChannelExtFcipEnhanced | read-write | current | This object will enable or disable the FCIP (Fibre Channel over Internet Protocol) enhanced capability for the port-channel. |
| 1.3.6.1.4.1.9.9.285.1.2 | NodeportChannelStatistics | |||
| 1.3.6.1.4.1.9.9.285.1.3 | NodeportChannelNotification | |||
| 1.3.6.1.4.1.9.9.285.1.3.0 | NodeportChannelNotifications | |||
| 1.3.6.1.4.1.9.9.285.2 | NodeportChannelMIBConformance | |||
| 1.3.6.1.4.1.9.9.285.2.1 | NodeportChannelMIBCompliances | |||
| 1.3.6.1.4.1.9.9.285.2.1.1 | ComplianceportChannelMIBCompliance | deprecated | The compliance statement for entities which implement the CISCO-PORT-CHANNEL-MIB mib. | |
| 1.3.6.1.4.1.9.9.285.2.1.2 | ComplianceportChannelMIBCompliance1 | deprecated | The compliance statement for entities which implement the CISCO-PORT-CHANNEL-MIB mib. | |
| 1.3.6.1.4.1.9.9.285.2.1.3 | ComplianceportChannelMIBCompliance2 | deprecated | The compliance statement for entities which implement the CISCO-PORT-CHANNEL-MIB mib. | |
| 1.3.6.1.4.1.9.9.285.2.1.4 | ComplianceportChannelMIBCompliance3 | read-only | deprecated | The compliance statement for entities which implement the CISCO-PORT-CHANNEL-MIB mib. |
| 1.3.6.1.4.1.9.9.285.2.1.5 | ComplianceportChannelMIBCompliance4 | read-only | current | The compliance statement for entities which implement the CISCO-PORT-CHANNEL-MIB mib. |
| 1.3.6.1.4.1.9.9.285.2.2 | NodeportChannelMIBGroups | |||
| 1.3.6.1.4.1.9.9.285.2.2.1 | GroupportChannelGroup | current | A collection of objects related to Port Channel Interface parameters. | |
| 1.3.6.1.4.1.9.9.285.2.2.2 | GroupportChannelGroupRev1 | current | A collection of objects related to Port Channel Interface parameters. | |
| 1.3.6.1.4.1.9.9.285.2.2.3 | GroupportChannelProtocolGroup | current | A collection of objects related to Port Channel Protocol mamagement. | |
| 1.3.6.1.4.1.9.9.285.2.2.4 | GroupportChannelFcipGroup | current | A collection of objects related to FCIP enhanced capability. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortChannelGroupMode | INTEGER { on(1), active(2) } | current | Defines how a Port Channel does channeling. on(1) - the port shall operate as part of a port channel or remain inactive. The port channel protocol is turned off and peer port is assumed to be configured in 'on' mode. ac… |
| PortChannelMode | INTEGER { auto(1), on(2), off(3), desirable(4) } | current | Defines how a Port Channel does channeling. auto(1) - place the port into passive negotiation state, in which the port waits for its peer to initiate negotiation. on(2) - force the port to enable channeling. off(3) - ch… |