CISCO-QP-LBG-MIB
75 objects
This MIB module represents the Qam-Partition (QP) and Load Balance Group (LBG) parameters in the headend and it is supported by an snmp agent. It defines objects for managing both QP and LBG.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifDescr |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.824 | IdentityciscoQpLbgMIB | This MIB module represents the Qam-Partition (QP) and Load Balance Group (LBG) parameters in the headend and it is supported by an snmp agent. It defines objec… | ||
| 1.3.6.1.4.1.9.9.824.0 | NodeciscoQpLbgNotifs | |||
| 1.3.6.1.4.1.9.9.824.0.1 | NotificationcqlQpStateChange | current | The device generates this notification when a QP state has changed and the value of cqlQpNotifyEnable is 'true'. | |
| 1.3.6.1.4.1.9.9.824.0.2 | NotificationcqlQamAdd | current | The device generates this notification when a qam has been added to QP and the value of cqlQamNotifyEnable is 'true'. | |
| 1.3.6.1.4.1.9.9.824.0.3 | NotificationcqlQamDelete | current | The device generates this notification when a qam has been deleted from QP and the value of cqlQamNotifyEnable is 'true'. | |
| 1.3.6.1.4.1.9.9.824.0.4 | NotificationcqlLbgRouteAdd | current | The device generates this notification when a route has been added to QP and the value of cqlRouteNotifyEnable is 'true'. | |
| 1.3.6.1.4.1.9.9.824.0.5 | NotificationcqlLbgRouteDelete | current | The device generates this notification when a route has been deleted from QP and the value of cqlRouteNotifyEnable is 'true'. | |
| 1.3.6.1.4.1.9.9.824.0.6 | NotificationcqlQamOverSubscribedAlert | current | The device generates this notification when a qam has been oversubscribed or cleared. This will be enabled when the object cqlQamOverSubscribedEnable is set to… | |
| 1.3.6.1.4.1.9.9.824.1 | NodeciscoQpLbgObjects | |||
| 1.3.6.1.4.1.9.9.824.1.1 | TablecqlqamPartitionTable | not-accessible | current | This table describes the various parameters of QP such as QP's state, protocol, management IP, server IP, server state, information related to qam and video ro… |
| 1.3.6.1.4.1.9.9.824.1.1.1 | RowcqlqamPartitionEntry | not-accessible | current | Each entry corresponds to the configuration of a QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.1 | ColumncqlqpIndex | not-accessible | current | Table Index. This index uniquely identifies the QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.2 | ColumncqlqpId | read-only | current | This object specifies the QP Id. |
| 1.3.6.1.4.1.9.9.824.1.1.1.3 | ColumncqlqpMgmtIpAddrType | read-only | current | The type of the Management address as defined inetAddressType. The supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.9.9.824.1.1.1.4 | ColumncqlqpMgmtIp | read-only | current | This object specifies the Management IP address of a QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.5 | ColumncqlqpServerIpAddrType | read-only | current | The type of the Server address as defined inetAddressType. The supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.9.9.824.1.1.1.6 | ColumncqlqpServerIp | read-only | current | Server IP of the QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.7 | ColumncqlqpState | read-only | current | This object specifies the state of the QP. The following are the valid states. inactive(1) QP is in inactive state. init(2) QP is in init state. active(3) QP i… |
| 1.3.6.1.4.1.9.9.824.1.1.1.8 | ColumncqlqpProtocol | read-only | current | This object specifies the QP Protocol. Gqi(1) Ermi(2) |
| 1.3.6.1.4.1.9.9.824.1.1.1.9 | ColumncqlqpKeepAliveTime | read-only | current | This object specifies the keepalive timer in seconds for a QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.10 | ColumncqlqpServerState | read-only | current | This object specifies the Server state of the QP. disconnected(1) Server is in disconnected state. connected(2) Server is in connected state. |
| 1.3.6.1.4.1.9.9.824.1.1.1.11 | ColumncqlqpGqiMacAddr | read-only | current | This object specifies the MAC address of a QP, applicable only for GQI Protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.12 | ColumncqlqpGqiResetInterval | read-only | current | This object specifies Reset interval for a QP. It is applicable only for GQI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.13 | ColumncqlqpNumQams | read-only | current | The total number of qams associated with the QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.14 | ColumncqlqpQamCarrrierList | read-only | current | This object specifies the list of Qam carriers associated with the QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.15 | ColumncqlqpNumRoutes | read-only | current | The total number of routes associated with the QP. |
| 1.3.6.1.4.1.9.9.824.1.1.1.16 | ColumncqlqpRouteDetails | read-only | current | Route details of the QP. It includes the configured IP and also the highest and lowest UDP range. |
| 1.3.6.1.4.1.9.9.824.1.1.1.17 | ColumncqlqpErmiErrpComponentName | read-only | current | Component Name for the QP, applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.18 | ColumncqlqpErmiErrpStreamingZone | read-only | current | Streaming zone for the QP, applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.19 | ColumncqlqpErmiErrpHoldTime | read-only | current | Hold Time in seconds for the QP, applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.20 | ColumncqlqpErmiErrpConnnectTime | read-only | current | Connect Time in seconds for the QP, applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.21 | ColumncqlqpErmiErrpConnectRetry | read-only | current | Connection retry in seconds for the QP. It is applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.22 | ColumncqlqpErmiRtspConnectTime | read-only | current | Connect time in seconds for the QP. It is applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.23 | ColumncqlqpErmiRtspConnectRetry | read-only | current | Connect retry in seconds for the QP, applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.24 | ColumncqlqpErmiRtspKeepAliveTime | read-only | current | Connection timeout in seconds for the QP. It is applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.25 | ColumncqlqpErmiRtspSessionTimeout | read-only | current | Session Timeout in seconds for the QP. It is applicable only for ERMI protocol. |
| 1.3.6.1.4.1.9.9.824.1.1.1.26 | ColumncqlqpQamOversubscribedStatus | read-only | current | This object specifies oversubscription status of a Qam. The value 'True' indicates the Qam is oversubscribed. Otherwise the value 'False' is reported. |
| 1.3.6.1.4.1.9.9.824.1.1.1.27 | ColumncqlqpServerIpList | read-only | current | List of Server IP's for the QP. |
| 1.3.6.1.4.1.9.9.824.1.2 | TablecqlloadBalanceGroupTable | not-accessible | current | This table describes the total bandwidth and the reserved bandwidth of QAM/IP based sessions. |
| 1.3.6.1.4.1.9.9.824.1.2.1 | RowcqlloadBalanceGroupEntry | not-accessible | current | Each entry corresponds to the parameters of a LBG. |
| 1.3.6.1.4.1.9.9.824.1.2.1.1 | ColumncqllbgIndex | not-accessible | current | This index is to identify the LBG group within the slot. |
| 1.3.6.1.4.1.9.9.824.1.2.1.2 | ColumncqllbgTotalBandwidth | read-only | current | This object specifies the total bandwidth in Kbps of a LBG. |
| 1.3.6.1.4.1.9.9.824.1.2.1.3 | ColumncqllbgQamRsvBandwidth | read-only | current | This object specifies the total reserved bandwidth in Kbps for depi sessions. |
| 1.3.6.1.4.1.9.9.824.1.2.1.4 | ColumncqllbgIpRsvBandwidth | read-only | current | This object specifies the total reserved bandwidth in Kbps for video sessions. |
| 1.3.6.1.4.1.9.9.824.1.2.1.5 | ColumncqllbgAvailableBandwidth | read-only | current | This object specifies the available bandwidth in Kbps. This may be calculated as (TotalBandwidth - (QamRsvBandwidth + IpRsvBandwith)). |
| 1.3.6.1.4.1.9.9.824.1.3 | TablecqllbgrouteTable | not-accessible | current | This table describes the route parameters such as QP id,destination ip, low and high udp range, reserved and allocated bandwidth. |
| 1.3.6.1.4.1.9.9.824.1.3.1 | RowcqllbgrouteEntry | not-accessible | current | Each entry corresponds to the parameters of a route. |
| 1.3.6.1.4.1.9.9.824.1.3.1.1 | ColumncqllbgRouteIndex | not-accessible | current | The table index. This is the index which uniquely identifies the route within the LBG group. |
| 1.3.6.1.4.1.9.9.824.1.3.1.2 | ColumncqllbgQpId | read-only | current | This object specifies the QP ID. The range of the QP is between 1 and 50. |
| 1.3.6.1.4.1.9.9.824.1.3.1.3 | ColumncqllbgDstIpAddrType | read-only | current | The type of the destination address as defined inetAddressType. The supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.9.9.824.1.3.1.4 | ColumncqllbgDstIpAddr | read-only | current | Destination IP address of the route to which the incoming packets are routed to. |
| 1.3.6.1.4.1.9.9.824.1.3.1.5 | ColumncqllbgUdpPortRangeMin | read-only | current | The lowest UDP port of the UDP port range that can be used. |
| 1.3.6.1.4.1.9.9.824.1.3.1.6 | ColumncqllbgUdpPortRangeMax | read-only | current | The highest UDP port of the UDP port range that can be used. |
| 1.3.6.1.4.1.9.9.824.1.3.1.7 | ColumncqllbgGqiIngressPort | read-only | current | Ingress port of a QP, applicable only for GQI protocol. |
| 1.3.6.1.4.1.9.9.824.1.3.1.8 | ColumncqllbgRsvBandwidth | read-only | current | Reserved bandwidth is the total bitrate reserved on this route in Kbps. |
| 1.3.6.1.4.1.9.9.824.1.3.1.9 | ColumncqllbgAllocatedBandwidth | read-only | current | The total bandwidth being used by sessions using this route in Kbps. |
| 1.3.6.1.4.1.9.9.824.1.3.1.10 | ColumncqllbgNumFlows | read-only | current | Number of sessions currently use this route to forward this traffic in Kbps. |
| 1.3.6.1.4.1.9.9.824.1.4 | ScalarcqlQpNotifyEnable | read-write | current | This object specifies whether the system generates cqlQpStateChange notifications. A false value will prevent cqlQpStateChange notifications from being generat… |
| 1.3.6.1.4.1.9.9.824.1.5 | ScalarcqlQamNotifyEnable | read-write | current | This object specifies whether the system generates cqlQamAdd or cqlQamDelete notifications. A false value will prevent cqlQamAdd or cqlQamDelete notifications … |
| 1.3.6.1.4.1.9.9.824.1.6 | ScalarcqlRouteNotifyEnable | read-write | current | This object specifies whether the system produces cqlRouteAdd or cqlRouteDelete notifications. A false value will prevent cqlRouteAdd or cqlRouteDelete notific… |
| 1.3.6.1.4.1.9.9.824.1.7 | ScalarcqlQamOverSubscribedEnable | read-write | current | This object specifies whether the system produces cqlQamOverSubscribedAlert notifications. A false value will prevent cqlQamOverSubscribedAlert notifications f… |
| 1.3.6.1.4.1.9.9.824.2 | NodeciscoQpLbgConform | |||
| 1.3.6.1.4.1.9.9.824.2.1 | NodeciscoQpLbgCompliances | |||
| 1.3.6.1.4.1.9.9.824.2.1.1 | CompliancecqlciscoQpLbgCompliance | deprecated | These objects describe the support level for QP and LBG. | |
| 1.3.6.1.4.1.9.9.824.2.1.2 | CompliancecqlciscoQpLbgCompliance1 | current | These objects describe the support level for QP and LBG. | |
| 1.3.6.1.4.1.9.9.824.2.2 | NodeciscoQpLbgGroups | |||
| 1.3.6.1.4.1.9.9.824.2.2.1 | GroupcqlciscoQpNotifsGroup | deprecated | A collection of QP notifications that may optionally be implemented. cqlciscoQpNotifsGroup object is superseded by cqlciscoQpNotifsGroup1. | |
| 1.3.6.1.4.1.9.9.824.2.2.2 | GroupcqlciscoLbgNotifsGroup | current | A collection of LBG notifications that may optionally be implemented. | |
| 1.3.6.1.4.1.9.9.824.2.2.3 | GroupcqlciscoQpObjectGroup | deprecated | A collection of objects providing information about the QP parameters. cqlciscoQpObjectGroup object is superseded by cqlciscoQpObjectGroup1. | |
| 1.3.6.1.4.1.9.9.824.2.2.4 | GroupcqlciscoLbgObjectGroup | current | A collection of objects providing information about the LBG parameters. | |
| 1.3.6.1.4.1.9.9.824.2.2.5 | GroupcqlciscoLbgRouteObjectGroup | current | A collection of objects providing information about the LBG route parameters. | |
| 1.3.6.1.4.1.9.9.824.2.2.6 | GroupcqlciscoQpLbgNotifsControlGroup | deprecated | A collection of objects providing information about the notification enables. cqlciscoQpLbgNotifsControlGroup object is superseded by cqlciscoQpLbgNotifsContro… | |
| 1.3.6.1.4.1.9.9.824.2.2.7 | GroupcqlciscoQpNotifsGroup1 | current | A collection of QP notifications that may optionally be implemented. | |
| 1.3.6.1.4.1.9.9.824.2.2.8 | GroupcqlciscoQpObjectGroup1 | current | A collection of objects providing information about the QP parameters. | |
| 1.3.6.1.4.1.9.9.824.2.2.9 | GroupcqlciscoQpLbgNotifsControlGroup1 | current | A collection of objects providing information about the notification enables. |