CISCO-RADIUS-EXT-MIB
54 objects
This MIB module defines objects describing RADIUS (Remote Access Dialin User Service), serving as an extension of the following MIB modules: - - RADIUS-AUTH-CLIENT-MIB [RFC4668] - RADIUS-AUTH-SERVER-MIB [RFC4669] - RADIUS-ACC-CLIENT-MIB [RFC4670] - RADIUS-ACC-SERVER-MIB [RFC4671] - RADIUS-DYNAUTH-CLIENT-MIB [RFC4672] - RADIUS-DYNAUTH-SERVER-MIB [RFC4673] - [RFC4668] D. Nelson, RADIUS Authentication Client MIB for IPv6, RFC-4668, August 2006. - [RFC4669] D. Nelson, RADIUS Authentication Server MIB for IPv6, RFC-4669, August 2006. - [RFC4670] D. Nelson, RADIUS Accounting Client MIB for IPv6, RFC-4670, August 2006. - [RFC4671] D. Nelson, RADIUS Accounting Server MIB for IPv6, RFC-4671, August 2006. - [RFC4672] S. De Cnodder, N. Jonnala, M. Chiba, RADIUS Dynamic Authorization Client MIB, RFC-4672, September 2006. - [RFC4673] S. De Cnodder, N. Jonnala, M. Chiba, RADIUS Dynamic Authorization Server MIB, RFC-4673, September 2006.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeInterval |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.736 | IdentityciscoRadiusExtMIB | This MIB module defines objects describing RADIUS (Remote Access Dialin User Service), serving as an extension of the following MIB modules: - - RADIUS-AUTH-CL… | ||
| 1.3.6.1.4.1.9.9.736.1 | NodecRadiusExtMIBObjects | |||
| 1.3.6.1.4.1.9.9.736.1.1 | NodecreClientGlobal | |||
| 1.3.6.1.4.1.9.9.736.1.1.1 | ScalarcreClientTotalMaxInQLength | read-only | current | This object indicates the maximum length of the queue which stores the incoming RADIUS packets. |
| 1.3.6.1.4.1.9.9.736.1.1.2 | ScalarcreClientTotalMaxWaitQLength | read-only | current | This object indicates the maximum length of the queue which stores the pending RADIUS packets for which the responses are outstanding. |
| 1.3.6.1.4.1.9.9.736.1.1.3 | ScalarcreClientTotalMaxDoneQLength | read-only | current | This object indicates the maximum length of the queue which stores those RADIUS packets for which the responses are received. |
| 1.3.6.1.4.1.9.9.736.1.1.4 | ScalarcreClientTotalAccessRejects | read-only | current | This object indicates the number of access reject packets received by the RADIUS client. |
| 1.3.6.1.4.1.9.9.736.1.1.5 | ScalarcreClientTotalAverageResponseDelay | read-only | current | This object indicates the overall response delay experienced by RADIUS packets (both authentication and accounting). |
| 1.3.6.1.4.1.9.9.736.1.1.6 | ScalarcreClientSourcePortRangeStart | read-only | current | If the 'extended RADIUS source ports' is configured, multiple source ports are used for sending out RADIUS authentication or accounting requests. This MIB obje… |
| 1.3.6.1.4.1.9.9.736.1.1.7 | ScalarcreClientSourcePortRangeEnd | read-only | current | If the 'extended RADIUS source port' is configured, multiple source ports are used for sending out RADIUS authentication or accounting requests. This MIB objec… |
| 1.3.6.1.4.1.9.9.736.1.1.8 | ScalarcreClientLastUsedSourcePort | read-only | current | If the 'extended RADIUS source ports' is configured, multiple source ports are used for sending out RADIUS authentication or accounting requests. This MIB obje… |
| 1.3.6.1.4.1.9.9.736.1.1.9 | ScalarcreClientLastUsedSourceId | read-only | current | This MIB object indicates the last source identifier that was used to send out a RADIUS packet when 'extended RADIUS source ports' is configured. The source id… |
| 1.3.6.1.4.1.9.9.736.1.1.10 | ScalarcreClientTotalAccessAccepts | read-only | current | This object indicates the number of access accept packets\n\ received by the RADIUS client. |
| 1.3.6.1.4.1.9.9.736.1.2 | NodecreClientAuthentication | |||
| 1.3.6.1.4.1.9.9.736.1.2.1 | ScalarcreAuthClientBadAuthenticators | read-only | current | This object indicates the number of RADIUS authentication response packets received which contained invalid authenticators. |
| 1.3.6.1.4.1.9.9.736.1.2.2 | ScalarcreAuthClientUnknownResponses | read-only | current | This object indicates the number of unknown RADIUS authentication responses received. |
| 1.3.6.1.4.1.9.9.736.1.2.3 | ScalarcreAuthClientTotalPacketsWithResponses | read-only | current | This object indicates the number of RADIUS authentication packets that received responses. |
| 1.3.6.1.4.1.9.9.736.1.2.4 | ScalarcreAuthClientBufferAllocFailures | read-only | current | This object indicates the number of buffer allocation failures encountered during RADIUS request formation. |
| 1.3.6.1.4.1.9.9.736.1.2.5 | ScalarcreAuthClientTotalResponses | read-only | current | This object indicates the number of RADIUS authentication response packets received by the RADIUS client. |
| 1.3.6.1.4.1.9.9.736.1.2.6 | ScalarcreAuthClientTotalPacketsWithoutResponses | read-only | current | This object indicates the number of RADIUS authentication packets that never received a response. |
| 1.3.6.1.4.1.9.9.736.1.2.7 | ScalarcreAuthClientAverageResponseDelay | read-only | current | This object indicates the average response delay experienced for RADIUS authentication requests. |
| 1.3.6.1.4.1.9.9.736.1.2.8 | ScalarcreAuthClientMaxResponseDelay | read-only | current | This object indicates the maximum delay experienced for RADIUS authentication requests. |
| 1.3.6.1.4.1.9.9.736.1.2.9 | ScalarcreAuthClientMaxBufferSize | read-only | current | This object indicates the maximum buffer size for RADIUS authentication packet. |
| 1.3.6.1.4.1.9.9.736.1.2.10 | ScalarcreAuthClientTimeouts | read-only | current | This object indicates the number of timeouts that have occurred for RADIUS authentication. After a timeout the client may retry sending the request to the same… |
| 1.3.6.1.4.1.9.9.736.1.2.11 | ScalarcreAuthClientDupIDs | read-only | current | This object indicates the number of times client has received duplicate authentication responses with the same identifier. Out of these two packets, the later … |
| 1.3.6.1.4.1.9.9.736.1.2.12 | ScalarcreAuthClientMalformedResponses | read-only | current | This object indicates the number of malformed RADIUS authentication responses received. Malformed packets include packets with an invalid length. |
| 1.3.6.1.4.1.9.9.736.1.2.13 | ScalarcreAuthClientLastUsedSourceId | read-only | current | This MIB object indicates the last source identifier that was used to send out a RADIUS authentication request when 'extended RADIUS source ports' is configure… |
| 1.3.6.1.4.1.9.9.736.1.3 | NodecreClientAccounting | |||
| 1.3.6.1.4.1.9.9.736.1.3.1 | ScalarcreAcctClientBadAuthenticators | read-only | current | This object indicates the number of RADIUS Accounting-Response packets received with invalid authenticators. |
| 1.3.6.1.4.1.9.9.736.1.3.2 | ScalarcreAcctClientUnknownResponses | read-only | current | This object indicates the number of unknown RADIUS accounting responses received. |
| 1.3.6.1.4.1.9.9.736.1.3.3 | ScalarcreAcctClientTotalPacketsWithResponses | read-only | current | This object indicates the number of RADIUS accounting packets that received responses. |
| 1.3.6.1.4.1.9.9.736.1.3.4 | ScalarcreAcctClientBufferAllocFailures | read-only | current | This object indicates the number of buffer allocation failures encountered for RADIUS accounting request. |
| 1.3.6.1.4.1.9.9.736.1.3.5 | ScalarcreAcctClientTotalResponses | read-only | current | This object indicates the number of RADIUS accounting response packets received by the RADIUS client. |
| 1.3.6.1.4.1.9.9.736.1.3.6 | ScalarcreAcctClientTotalPacketsWithoutResponses | read-only | current | This object indicates the number of RADIUS accounting packets that never received a response. |
| 1.3.6.1.4.1.9.9.736.1.3.7 | ScalarcreAcctClientAverageResponseDelay | read-only | current | This object indicates the average response delay experienced for RADIUS accounting. |
| 1.3.6.1.4.1.9.9.736.1.3.8 | ScalarcreAcctClientMaxResponseDelay | read-only | current | This object indicates the maximum delay experienced for RADIUS accounting. |
| 1.3.6.1.4.1.9.9.736.1.3.9 | ScalarcreAcctClientMaxBufferSize | read-only | current | This object indicates the maximum buffer size for RADIUS accounting packets. |
| 1.3.6.1.4.1.9.9.736.1.3.10 | ScalarcreAcctClientTimeouts | read-only | current | This object indicates the number of timeouts that have occurred for RADIUS accounting. After a timeout the client may retry sending the request to the same ser… |
| 1.3.6.1.4.1.9.9.736.1.3.11 | ScalarcreAcctClientDupIDs | read-only | current | This object indicates the number of times client has received duplicate accounting responses with the same identifier. Out of these two packets, the later pack… |
| 1.3.6.1.4.1.9.9.736.1.3.12 | ScalarcreAcctClientMalformedResponses | read-only | current | This object indicates the number of malformed RADIUS accounting responses received. Malformed packets include packets with an invalid length. |
| 1.3.6.1.4.1.9.9.736.1.3.13 | ScalarcreAcctClientLastUsedSourceId | read-only | current | This MIB object indicates the last source identifier that was used to send out a RADIUS accounting request when 'extended RADIUS source ports' is configured. T… |
| 1.3.6.1.4.1.9.9.736.1.4 | NodecreClientDynAuth | |||
| 1.3.6.1.4.1.9.9.736.1.5 | NodecreServerGlobal | |||
| 1.3.6.1.4.1.9.9.736.1.6 | NodecreServerAuthentication | |||
| 1.3.6.1.4.1.9.9.736.1.7 | NodecreServerAccounting | |||
| 1.3.6.1.4.1.9.9.736.1.8 | NodecreServerDynAuth | |||
| 1.3.6.1.4.1.9.9.736.2 | NodecRadiusExtMIBConformance | |||
| 1.3.6.1.4.1.9.9.736.2.1 | NodecreMIBCompliances | |||
| 1.3.6.1.4.1.9.9.736.2.1.1 | CompliancecreMIBCompliance | current | The compliance statement for entities which implement the CISCO RADIUS Extention MIB | |
| 1.3.6.1.4.1.9.9.736.2.2 | NodecreMIBGroups | |||
| 1.3.6.1.4.1.9.9.736.2.2.1 | GroupcreClientGlobalGroup | current | Objects for providing aggregated statistics of RADIUS client. | |
| 1.3.6.1.4.1.9.9.736.2.2.2 | GroupcreClientAuthenenticationGroup | current | Objects for providing statistics of RADIUS client authentication packets. | |
| 1.3.6.1.4.1.9.9.736.2.2.3 | GroupcreClientAccountingGroup | current | Objects for providing statistics of RADIUS client accounting packets. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RadiusSourceIdentifier | Unsigned32 (0..255) | current | This textual convention represents the range of identifers used when 'extended RADIUS source port' is configured. |