CISCO-RHINO-MIB
118 objects
-Added enum sixPortDS3 for ciscoLS1010SubModuleType. -Added enum nodeSwitchProcessor2ndGeneration for ciscoLS1010ModuleType. -Added enum ac175W for psType. -Added Group object for Notification objects.
Imported Objects
| CISCO-SMI | workgroup |
| CISCO-TC | Unsigned32 |
| IF-MIB | InterfaceIndex |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.11 | IdentityciscoLS1010ChassisMIB | -Added enum sixPortDS3 for ciscoLS1010SubModuleType. -Added enum nodeSwitchProcessor2ndGeneration for ciscoLS1010ModuleType. -Added enum ac175W for psType. -Ad… | ||
| 1.3.6.1.4.1.9.5.11.1 | NodeciscoLS1010ChassisMIBObjects | |||
| 1.3.6.1.4.1.9.5.11.1.1 | NodeciscoLS1010ChassisGroup | |||
| 1.3.6.1.4.1.9.5.11.1.1.1 | ScalarciscoLS1010ChassisSysType | read-only | current | The chassis system type. |
| 1.3.6.1.4.1.9.5.11.1.1.2 | ScalarciscoLS1010ChassisBkplType | read-only | current | The chassis backplane type. |
| 1.3.6.1.4.1.9.5.11.1.1.3 | ScalarciscoLS1010ChassisPs0Type | read-only | current | Type of power supply number 1. |
| 1.3.6.1.4.1.9.5.11.1.1.4 | ScalarciscoLS1010ChassisPs0AdminStatus | read-write | current | Enable or disable power supply 1. |
| 1.3.6.1.4.1.9.5.11.1.1.5 | ScalarciscoLS1010ChassisPs0Status | read-only | current | Status of power supply number 1. |
| 1.3.6.1.4.1.9.5.11.1.1.6 | ScalarciscoLS1010ChassisPs0Led | read-only | current | LED Status of power supply number 1. |
| 1.3.6.1.4.1.9.5.11.1.1.7 | ScalarciscoLS1010ChassisPs1Type | read-only | current | Type of power supply number 2. |
| 1.3.6.1.4.1.9.5.11.1.1.8 | ScalarciscoLS1010ChassisPs1AdminStatus | read-write | current | Enable or disable power supply 2. |
| 1.3.6.1.4.1.9.5.11.1.1.9 | ScalarciscoLS1010ChassisPs1Status | read-only | current | Status of power supply number 2. |
| 1.3.6.1.4.1.9.5.11.1.1.10 | ScalarciscoLS1010ChassisPs1Led | read-only | current | LED Status of power supply number 2. |
| 1.3.6.1.4.1.9.5.11.1.1.11 | ScalarciscoLS1010ChassisFanStatus | read-only | current | Status of the chassis fan. |
| 1.3.6.1.4.1.9.5.11.1.1.12 | ScalarciscoLS1010ChassisFanLed | read-only | current | LED Status of fan. |
| 1.3.6.1.4.1.9.5.11.1.1.13 | ScalarciscoLS1010ChassisCardStatusLed | read-only | current | LED Status of CPU card. |
| 1.3.6.1.4.1.9.5.11.1.1.14 | ScalarciscoLS1010ChassisEnetLinkLed | read-only | current | Ethernet link status LED of CPU card. |
| 1.3.6.1.4.1.9.5.11.1.1.15 | ScalarciscoLS1010Chassis12VoltStatus | read-only | current | The chassis 12V status. |
| 1.3.6.1.4.1.9.5.11.1.1.16 | ScalarciscoLS1010ChassisTempStatus | read-only | current | The chassis temperature status. The values of minorWarning(3), majorWarning(4) and criticalWarning(5) will be primarily used by C6400 to indicate the core temp… |
| 1.3.6.1.4.1.9.5.11.1.1.17 | ScalarciscoLS1010ChassisPcmciaSlot0Type | read-only | current | Type of PCMCIA slot 0 type. |
| 1.3.6.1.4.1.9.5.11.1.1.18 | ScalarciscoLS1010ChassisPcmciaSlot1Type | read-only | current | Type of PCMCIA slot 1 type. |
| 1.3.6.1.4.1.9.5.11.1.1.19 | ScalarciscoLS1010ChassisNumSlots | read-only | current | The number of slots in the chassis for plug-in modules. |
| 1.3.6.1.4.1.9.5.11.1.1.20 | ScalarciscoLS1010ChassisLastChange | read-only | current | The last time chassis physical content get changed. |
| 1.3.6.1.4.1.9.5.11.1.1.21 | ScalarciscoLS1010ChassisFailureAction | read-write | current | The action to take when there is any chassis failure, which includes either power supply, voltage, temperature and fan failure. |
| 1.3.6.1.4.1.9.5.11.1.1.22 | ScalarciscoLS1010ChassisChangeAction | read-write | current | The action to take when there is any chassis change, which includes either power supply, fan and boards. |
| 1.3.6.1.4.1.9.5.11.1.1.23 | ScalarciscoLS1010ChassisClockingMode | read-write | current | The clocking mode of the ls1010 system. By default, the mode is non-revertive, which means that the clock will stick to the current priority, even though highe… |
| 1.3.6.1.4.1.9.5.11.1.1.24 | Scalarciscols1010SystemClockSourceStatus | read-only | current | The network clock source status of 'system' source: 'notSelected' indicates 'system' not selected as the network clock source. 'selected' indicates ASP freerun… |
| 1.3.6.1.4.1.9.5.11.1.1.25 | Scalarciscols1010SystemClockSourcePriority | read-write | current | The highest priority at which 'system' is configured as a network clock source. |
| 1.3.6.1.4.1.9.5.11.1.1.26 | ScalarciscoLS1010ChassisInletTempStatus | read-only | current | C6400 has two temperature sensors: core and inlet. C6400 use this object to represent the inlet temperature and use the object ciscoLS1010ChassisTempStatus to … |
| 1.3.6.1.4.1.9.5.11.1.2 | NodeciscoLS1010ModuleGroup | |||
| 1.3.6.1.4.1.9.5.11.1.2.1 | TableciscoLS1010ModuleTable | not-accessible | current | A list of module entries. The number of entries is given by the value of ciscoLS1010ChassisNumSlots. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1 | RowciscoLS1010ModuleEntry | not-accessible | current | Entry containing information about one module in a slot of the chassis. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.1 | ColumnciscoLS1010ModuleIndex | not-accessible | current | A unique value for each module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.2 | ColumnciscoLS1010ModuleType | read-only | current | The type of module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.3 | ColumnciscoLS1010ModuleSerialNumber | read-only | deprecated | The serial number of the module. Deprecated in favor of object ciscoLS1010ModuleSerialNumberString. This object returns 0 for modules using an alphanumeric num… |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.4 | ColumnciscoLS1010ModuleHwVersion | read-only | current | The hardware version of the module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.5 | ColumnciscoLS1010ModuleSwVersion | read-only | current | The software version number. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.6 | ColumnciscoLS1010ModuleDescr | read-only | current | A descriptive string used by the agent to describe the module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.7 | ColumnciscoLS1010ModuleNumSubModules | read-only | current | The max number of sub-modules supported by this module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.8 | ColumnciscoLS1010ModuleAdminStatus | read-write | current | This object, when read, always returns a value of ok(1). Setting this object to one of the acceptable values gives the following results: reset: reset the modu… |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.9 | ColumnciscoLS1010ModuleOperStatus | read-only | current | Operational status of the module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.10 | ColumnciscoLS1010ModuleHwVersionMinor | read-only | current | The minor hardware version of the module. |
| 1.3.6.1.4.1.9.5.11.1.2.1.1.11 | ColumnciscoLS1010ModuleSerialNumberString | read-only | current | The serial number of the module. |
| 1.3.6.1.4.1.9.5.11.1.3 | NodeciscoLS1010SubModuleGroup | |||
| 1.3.6.1.4.1.9.5.11.1.3.1 | TableciscoLS1010SubModuleTable | not-accessible | current | A list of sub-module entries. The number of entries is given by the value of ciscoLS1010SlotNumSubModules. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1 | RowciscoLS1010SubModuleEntry | not-accessible | current | Entry containing information about one sub-module in a sub-slot of the module. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.1 | ColumnciscoLS1010SubModuleIndex | not-accessible | current | A unique value for each sub-module within the module. This value is determined by sub-slot number where the sub-module is inserted. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.2 | ColumnciscoLS1010SubModuleType | read-only | current | The type of sub-module. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.3 | ColumnciscoLS1010SubModuleSerialNumber | read-only | deprecated | The serial number of the sub-module. Deprecated in favor of object ciscoLS1010SubModuleSerialNumberString. This object returns 0 for submodules using an alphan… |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.4 | ColumnciscoLS1010SubModuleHwVersion | read-only | current | The major hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersionMinor, this completely specifies the hardware version of the sub-modul… |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.5 | ColumnciscoLS1010SubModuleSwVersion | read-only | current | The software version number. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.6 | ColumnciscoLS1010SubModuleDescr | read-only | current | A descriptive string used by the agent to describe the module. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.7 | ColumnciscoLS1010SubModuleNumPorts | read-only | current | The maximum number of ports supported by this sub-module. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.8 | ColumnciscoLS1010SubModuleAdminStatus | read-write | current | This object can be read/written as reset or ok. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.9 | ColumnciscoLS1010SubModuleHwVersionMinor | read-only | current | The minor hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersion, this completely specifies the hardware version of the sub-module. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.10 | ColumnciscoLS1010SubModuleOperStatus | read-only | current | Operational status of the submodule. |
| 1.3.6.1.4.1.9.5.11.1.3.1.1.11 | ColumnciscoLS1010SubModuleSerialNumberString | read-only | current | The serial number of the sub-module. |
| 1.3.6.1.4.1.9.5.11.1.4 | NodeciscoLS1010PortGroup | |||
| 1.3.6.1.4.1.9.5.11.1.4.1 | TableciscoLS1010PortTable | not-accessible | current | A list of port entries. The number of entries is determined by the number of modules in the chassis, the number of sub-module in the module and the number of p… |
| 1.3.6.1.4.1.9.5.11.1.4.1.1 | RowciscoLS1010PortEntry | not-accessible | current | Entry containing information for a particular port on a sub-module. |
| 1.3.6.1.4.1.9.5.11.1.4.1.1.1 | ColumnciscoLS1010PortIndex | not-accessible | current | An index value that uniquely identifies this port within a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are… |
| 1.3.6.1.4.1.9.5.11.1.4.1.1.2 | ColumnciscoLS1010PortIfIndex | read-only | current | The ifIndex value assigned to this port. |
| 1.3.6.1.4.1.9.5.11.1.5 | NodeciscoLS1010CpuSwitchGroup | |||
| 1.3.6.1.4.1.9.5.11.1.5.1 | ScalarciscoAtmCpuAdminStatus | read-write | current | Reset will reload the CPU board. |
| 1.3.6.1.4.1.9.5.11.1.5.2 | ScalarciscoAtmSwitchTotalBuffer | read-only | current | The total cell buffer count in switch's shared memory. |
| 1.3.6.1.4.1.9.5.11.1.5.3 | ScalarciscoAtmSwitchFreeBuffer | read-only | current | The free cell buffer count in switch's shared memory. |
| 1.3.6.1.4.1.9.5.11.1.5.4 | ScalarciscoAtmSwitchDiscardCells | read-only | current | The total discarded cells of the switch. |
| 1.3.6.1.4.1.9.5.11.1.5.5 | ScalarciscoAtmSwitchInvalidCells | read-only | current | The total invalid cells of the switch. |
| 1.3.6.1.4.1.9.5.11.1.5.6 | TableciscoAtmSwitchInvalidCellHeaderTable | not-accessible | current | A list of invalid cell header entries. |
| 1.3.6.1.4.1.9.5.11.1.5.6.1 | RowciscoAtmSwitchInvalidCellHeaderEntry | not-accessible | current | a entry of invalid cell header. |
| 1.3.6.1.4.1.9.5.11.1.5.6.1.1 | ColumnciscoAtmSwitchInvalidCellHeaderIndex | not-accessible | current | A sequence number that identifies a invalid cell header entry in the table. |
| 1.3.6.1.4.1.9.5.11.1.5.6.1.2 | ColumnciscoAtmSwitchInvalidCellHeader | read-only | current | The most recently received invalid cells header. octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 i… |
| 1.3.6.1.4.1.9.5.11.1.5.7 | ScalarciscoAtmCpuTerminateOamFlow | read-write | obsolete | Terminate all the incoming OAM cells to the CPU port. |
| 1.3.6.1.4.1.9.5.11.1.5.8 | ScalarciscoAtmInterceptEndToEndOamFlow | read-write | current | Indicates whether incoming end-to-end OAM flow cells are sent to the switch CPU. If the value is 'true', all incoming end-to-end OAM flow cells, including thos… |
| 1.3.6.1.4.1.9.5.11.1.6 | NodeclsEnetPortGroup | |||
| 1.3.6.1.4.1.9.5.11.1.6.1 | TableclsEnetPortTable | not-accessible | current | A list of ethernet port entries. This table is mainly to support ethernet port only. |
| 1.3.6.1.4.1.9.5.11.1.6.1.1 | RowclsEnetPortEntry | not-accessible | current | Entry contains information of a particular ethernet port. |
| 1.3.6.1.4.1.9.5.11.1.6.1.1.1 | ColumnclsEnetPortDuplex | read-write | current | Indicates whether the port is operating in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will b… |
| 1.3.6.1.4.1.9.5.11.1.6.1.1.2 | ColumnclsEnetPortAdminSpeed | read-write | current | Indicates the desired speed of the port in bits per second. The current operational speed of the port is determined by ifSpeed. If the port could not agree wit… |
| 1.3.6.1.4.1.9.5.11.1.6.1.1.3 | ColumnclsEnetPortType | read-only | current | The type of physical layer medium-dependent interface on the port. unknown(1) indicates that the port type is none of those defined. empty(6) indicates that th… |
| 1.3.6.1.4.1.9.5.11.1.6.1.1.4 | ColumnclsEnetPortLinkStatus | read-write | current | This object indicates how the link status of the port came up. autoNegotiate(2) negotiate the link with the partner port. If successful, the link will come up,… |
| 1.3.6.1.4.1.9.5.11.1.7 | NodeclsPortLedGroup | |||
| 1.3.6.1.4.1.9.5.11.1.7.1 | TableclsPortLedTable | not-accessible | current | A list of LED entries associated with a port. |
| 1.3.6.1.4.1.9.5.11.1.7.1.1 | RowclsPortLedEntry | not-accessible | current | Entry contains information of a particular LED associated with a particular port which is identified by ifIndex. |
| 1.3.6.1.4.1.9.5.11.1.7.1.1.1 | ColumnclsPortLedIndex | not-accessible | current | An index that uniquely identifies this LED among all the LEDs associated with the port identified by ifIndex. This value is related to the physical location of… |
| 1.3.6.1.4.1.9.5.11.1.7.1.1.2 | ColumnclsPortLedType | read-only | current | Indicates the type or label of the LED. |
| 1.3.6.1.4.1.9.5.11.1.7.1.1.3 | ColumnclsPortLedStatus | read-only | current | Indicates the status of the LED. Unknown(1) indicates either the LED status is not supported or the status is none of the defined. |
| 1.3.6.1.4.1.9.5.11.2 | NodeciscoLS1010ChassisMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.5.11.2.0 | NodeciscoLS1010ChassisMIBNotifications | |||
| 1.3.6.1.4.1.9.5.11.2.0.1 | NotificationciscoLS1010ChassisFailureNotification | current | Agent detects a change in the status of ps0, ps1, fan, 12V line, and/or chassis temperature. This notification will be generated when the status changes from n… | |
| 1.3.6.1.4.1.9.5.11.2.0.2 | NotificationciscoLS1010ChassisChangeNotification | current | Agent detects any hot-swap component change or changes in the chassis. | |
| 1.3.6.1.4.1.9.5.11.3 | NodeciscoLS1010ChassisMIBConformance | |||
| 1.3.6.1.4.1.9.5.11.3.1 | NodeciscoLS1010ChassisMIBCompliances | |||
| 1.3.6.1.4.1.9.5.11.3.1.1 | ComplianceciscoLS1010ChassisMIBCompliance | obsolete | The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev1. | |
| 1.3.6.1.4.1.9.5.11.3.1.2 | ComplianceciscoLS1010ChassisMIBComplianceRev1 | obsolete | The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev2. | |
| 1.3.6.1.4.1.9.5.11.3.1.3 | ComplianceciscoLS1010ChassisMIBComplianceRev2 | obsolete | The compliance statement for entities which implement the Cisco LS1010 Chassis MIB | |
| 1.3.6.1.4.1.9.5.11.3.1.4 | ComplianceciscoLS1010ChassisMIBComplianceRev3 | obsolete | The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. | |
| 1.3.6.1.4.1.9.5.11.3.1.5 | ComplianceciscoLS1010ChassisMIBComplianceRev4 | obsolete | The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. | |
| 1.3.6.1.4.1.9.5.11.3.1.6 | ComplianceciscoLS1010ChassisMIBComplianceRev5 | obsolete | The compliance statement for the Cisco 6400 product. | |
| 1.3.6.1.4.1.9.5.11.3.1.7 | ComplianceciscoLS1010ChassisMIBComplianceRev6 | current | The compliance statement for this MIB. | |
| 1.3.6.1.4.1.9.5.11.3.2 | NodeciscoLS1010ChassisMIBGroups | |||
| 1.3.6.1.4.1.9.5.11.3.2.1 | GroupciscoLS1010ChassisMIBGroup | obsolete | A collection of objects providing rhino chassis information | |
| 1.3.6.1.4.1.9.5.11.3.2.2 | GroupciscoLS1010ChassisMIBObsoleteGroup | obsolete | A collection of objects providing rhino chassis information which are obsolete. | |
| 1.3.6.1.4.1.9.5.11.3.2.3 | GroupciscoLS1010ChassisMIBRev1Group | current | A collection of objects useful for reporting the hardware version of sub-modules in the chassis. | |
| 1.3.6.1.4.1.9.5.11.3.2.4 | GroupciscoLS1010ChassisMIBClockingGroup | current | A collection of objects useful for managing clocking. | |
| 1.3.6.1.4.1.9.5.11.3.2.5 | GroupciscoLS1010ChassisMIBGroup1 | obsolete | A collection of objects for managing the LS1010 chassis. | |
| 1.3.6.1.4.1.9.5.11.3.2.6 | GroupclsEnetPortGroup1 | current | A collection of objects for managing ethernet ports. | |
| 1.3.6.1.4.1.9.5.11.3.2.7 | GroupclsPortLedGroup1 | current | A collection of objects for showing port LEDs. | |
| 1.3.6.1.4.1.9.5.11.3.2.8 | GroupclsOperStatusGroup | current | A collection of objects for displaying operational status of modules and sub-modules in the chassis. | |
| 1.3.6.1.4.1.9.5.11.3.2.9 | GroupclsInletTempGroup | current | A collection of objects for reporting inlet temperature. | |
| 1.3.6.1.4.1.9.5.11.3.2.10 | GroupciscoLS1010ChassisMIBGroup2 | current | A collection of objects for managing the LS1010 chassis. | |
| 1.3.6.1.4.1.9.5.11.3.2.11 | GroupciscoLS1010ChassisMIBDeprecatedGroup | deprecated | A collection of objects providing rhino chassis information which are obsolete. | |
| 1.3.6.1.4.1.9.5.11.3.2.12 | GroupciscoLS1010ChassisMIBNotificationGroup | current | A collection of notifications supported by LS1010 chassis. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdminStatus | INTEGER { enable(1), disable(2), reset(3) } | current | Admin status of a chassis component. |
| Led | INTEGER { off(1), green(2), red(3), yellow(4), blinkgreen(5), blinkyellow(6), blinkred(7), unknown(8) } | current | LED status |
| OperStatus | INTEGER { unknown(1), ok(2), fault(3), fanAlarm(4), partialFault(5), empty(6) } | current | Operational status of a chassis component. fanAlarm(4) is only applicable to the C5500 power supply. A fault(3) supercedes a fanAlarm(4). partialFault(5) & empty(6) are used by the Cisco6400 for the fan status to indica… |
| PcmciaType | INTEGER { unknown(1), empty(2), flash(3), disk(4) } | current | PCMCIA card type |
| PsType | INTEGER { powerone(0), astec(1), minus48VDC(2), empty(3), ac1100W(4), ac1200W(5), dc1200W(6), pem(7), ac1360W(8), dc1360W(9), ac2000W(10), dc2000W(11), acpem(12), ac175W(13) } | current | Power Supply type |