CISCO-RTTMON-TC-MIB
17 objects
This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not limited to only these MIBs. These textual conventions were originally defined in CISCO-RTTMON-MIB. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery LSP: Label Switched Path MPLS: Multi Protocol Label Switching RTT: Round Trip Time SAA: Service Assurance Agent VPN: Virtual Private Network CFM: Connection Fault Management
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.485 | IdentityciscoRttMonTCMIB | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not limited to only these MIBs. Th… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CipslaPercentileVar | INTEGER { rtt(1), owsd(2), owds(3), jittersd(4), jitterds(5), jitteravg(6) } | current | The following are specific percentile types. These types are supported by UDP Jitter, ICMP Jitter and Ethernet Jitter probes: rtt(1) - Round Trip Time owsd(2) - One way delay - Source to Destination owds(3) - One way de… |
| RttMonCodecType | INTEGER { notApplicable(0), g711ulaw(1), g711alaw(2), g729a(3) } | current | Specifies the codec type to be used with the jitter probe. The following codec types are defined: notApplicable - no CodecType is defined g711ulaw - uses G.711 U Law 64000 bps g711alaw - uses G.711 A Law 64000 bps g729a… |
| RttMonCtrlIndex | Unsigned32 (1..2147483647) | current | The value of this object identifies the row in the ipslaEthernetGrpCtrlTable and ipslaEthernetGrpReactTable. It can be used for other IP SLA control tables. |
| RttMonIdLst | OCTET STRING (SIZE (0..255)) | current | A string that specifies a list of the IP SLA probe identifiers or other numeric identifiers. The identifiers will be specified in the following form. (a) Individual identifiers with comma separated as 1,5,3. (b) Range f… |
| RttMonLSPPingReplyMode | INTEGER { replyIpv4Udp(1), replyIpv4UdpRA(2) } | current | Specifies the Reply mode for the MPLS LSP Echo request packets. The following reply modes are supported: replyIpv4Udp(1) - an mpls echo request will normally have reply via IPv4 UDP packets. replyIpv4UdpRA(2) - reply vi… |
| RttMonOperation | INTEGER { notApplicable(0), httpGet(1), httpRaw(2), ftpGet(3), ftpPassive(4), ftpActive(5), voipDTAlertRinging(6), voipDTConnectOK(7) } | current | The following are specific RTT operations for a particular probe type: notApplicable(0) - This object is not applicable for the probe type. httpGet(1) - HTTP get request httpRaw(2) - HTTP request with user defined paylo… |
| RttMonProtocol | INTEGER { notApplicable(1), ipIcmpEcho(2), ipUdpEchoAppl(3), snaRUEcho(4), snaLU0EchoAppl(5), snaLU2EchoAppl(6), snaLU62Echo(7), snaLU62EchoAppl(8), appleTalkEcho(9), appleTalkEchoAppl(10), decNetEcho(11), decNetEchoAppl(12), ipxEcho(13), ipxEchoAppl(14), isoClnsEcho(15), isoClnsEchoAppl(16), vinesEcho(17), vinesEchoAppl(18), xnsEcho(19), xnsEchoAppl(20), apolloEcho(21), apolloEchoAppl(22), netbiosEchoAppl(23), ipTcpConn(24), httpAppl(25), dnsAppl(26), jitterAppl(27), dlswAppl(28), dhcpAppl(29), ftpAppl(30), mplsLspPingAppl(31), voipAppl(32), rtpAppl(33), icmpJitterAppl(34), ethernetPingAppl(35), ethernetJitterAppl(36), videoAppl(37), y1731dmm(38), y17311dm(39), y1731lmm(40), mcastJitterAppl(41), y1731slm(42), y1731dmmv1(43), fabricPathEchoAppl(44) } | current | Specifies the protocol to be used to perform the timed echo request/response. The following protocols are defined: NOTE: All protocols that end in 'Appl' will support the asymetric request/response (ARR) protocol. See t… |
| RttMonReactVar | INTEGER { rtt(1), jitterSDAvg(2), jitterDSAvg(3), packetLossSD(4), packetLossDS(5), mos(6), timeout(7), connectionLoss(8), verifyError(9), jitterAvg(10), icpif(11), packetMIA(12), packetLateArrival(13), packetOutOfSequence(14), maxOfPositiveSD(15), maxOfNegativeSD(16), maxOfPositiveDS(17), maxOfNegativeDS(18), iaJitterDS(19), frameLossDS(20), mosLQDS(21), mosCQDS(22), rFactorDS(23), successivePacketLoss(24), maxOfLatencyDS(25), maxOfLatencySD(26), latencyDSAvg(27), latencySDAvg(28), packetLoss(29), iaJitterSD(30), mosCQSD(31), rFactorSD(32), lpdGroup(33), lpdTreeTrace(34), lpdAll(35), unavailSD(36), unavailDS(37), pktLossPctSD(38), pktLossPctDS(39), rttPct(40), maxOfLatencySDPct(41), maxOfLatencyDSPct(42), latencySDAvgPct(43), latencyDSAvgPct(44), jitterSDAvgPct(45), jitterDSAvgPct(46), jitterAvgPct(47), overThreshold(48), protocolSpecificError(49) } | current | The following are specific Reaction variables for a particular probe type: rtt(1) - Round Trip Time jitterSDAvg(2) - Jitter average from source to Destination jitterDSAvg(3) - Jitter average from destination to source p… |
| RttMonRttType | INTEGER { echo(1), pathEcho(2), fileIO(3), script(4), udpEcho(5), tcpConnect(6), http(7), dns(8), jitter(9), dlsw(10), dhcp(11), ftp(12), voip(13), rtp(14), lspGroup(15), icmpjitter(16), lspPing(17), lspTrace(18), ethernetPing(19), ethernetJitter(20), lspPingPseudowire(21), video(22), y1731Delay(23), y1731Loss(24), mcastJitter(25), fabricPathEcho(26), pathJitter(27) } | current | Specifies the type of RTT operation to be performed. The value 'echo' will cause the RTT application to perform a timed echo request/response operation directed at the 'RttMonTargetAddress'. The value 'pathEcho' will ca… |
| RttMonScheduleStartType | INTEGER { pending(1), now(2), random(3), after(4), specific(5) } | current | These are defined values for scheduling the start time of a probe pending(1) - Pending state now(2) - Schedule the start time of probe to current time and probe is immediately started random(3) - Schedule the start time… |
| RttMonTargetAddress | OCTET STRING | current | A string which specifies the address of the target for the RTT operation; a value of RttMonTargetAddress which corresponds to a 'broadcast' address is disallowed. The interpretation of this string depends on the type of… |
| RttMplsVpnMonLpdFailureSense | INTEGER { unknown(1), noPath(2), allPathsBroken(3), allPathsUnexplorable(4), allPathsBrokenOrUnexplorable(5), timeout(6), error(7) } | current | These are the defined values for the causes of failure in LSP Path Discovery. unknown(1) - The cause of failure for the LSP Path Discovery cannot be determined. The discovery for the target PE may not have started. noPa… |
| RttMplsVpnMonLpdGrpStatus | INTEGER { unknown(1), up(2), partial(3), down(4) } | current | These are the defined values for the status of the LPD Group. unknown(1) - This indicates that some/all of the probes which are part of the LPD group have not completed even a single operation, so the group status canno… |
| RttMplsVpnMonRttType | INTEGER { jitter(1), echo(2), pathEcho(3) } | current | Specifies the type of RTT operation to be performed for Auto SAA L3 MPLS VPN. The value 'jitter' will cause the Auto SAA L3 MPLS VPN to automatically configure jitter operations. The value 'echo' will cause the Auto SAA… |
| RttReset | INTEGER { ready(1), reset(2) } | current | When the value set to 'reset', the entire RTT application goes through a reset sequence, making a best effort to revert to its startup condition. At other times, the value is 'ready'. |
| RttResponseSense | INTEGER { other(0), ok(1), disconnected(2), overThreshold(3), timeout(4), busy(5), notConnected(6), dropped(7), sequenceError(8), verifyError(9), applicationSpecific(10), dnsServerTimeout(11), tcpConnectTimeout(12), httpTransactionTimeout(13), dnsQueryError(14), httpError(15), error(16), mplsLspEchoTxError(17), mplsLspUnreachable(18), mplsLspMalformedReq(19), mplsLspReachButNotFEC(20), enableOk(21), enableNoConnect(22), enableVersionFail(23), enableInternalError(24), enableAbort(25), enableFail(26), enableAuthFail(27), enableFormatError(28), enablePortInUse(29), statsRetrieveOk(30), statsRetrieveNoConnect(31), statsRetrieveVersionFail(32), statsRetrieveInternalError(33), statsRetrieveAbort(34), statsRetrieveFail(35), statsRetrieveAuthFail(36), statsRetrieveFormatError(37), statsRetrievePortInUse(38) } | current | These are the defined values for a completion status of a RTT operation. other(0) - the operation is not started or completed or this object is not applicable for the probe type. ok(1) - a valid completion occurred and … |