CISCO-SAN-BASE-SVC-MIB
58 objects
Common MIB module to manage services in Storage Area Network (SAN). Service is deployed on service nodes on multiple switches forming a cluster. Nodes in the same cluster pick up the workload of a failed node to provide fault tolerance. An example of service that can be deployed is IO Acceleration (IOA) service. Glossary: The following terms are used in this MIB: pWWN: Port World Wide Name is a identifier assigned to a port in a Fibre Channel fabric. They perform a function equivalent to the MAC address in Ethernet protocol, as it is supposed to be unique identifier in the network. Nx_port: Nx_port is a storage port in Fibre Channel fabric that belongs to host or target.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcNameId |
| IF-MIB | ifDescr InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.702 | IdentityciscoSanBaseSvcMIB | Common MIB module to manage services in Storage Area Network (SAN). Service is deployed on service nodes on multiple switches forming a cluster. Nodes in the s… | ||
| 1.3.6.1.4.1.9.9.702.0 | NodeciscoSanBaseSvcMIBNotifs | |||
| 1.3.6.1.4.1.9.9.702.0.1 | NotificationciscoSanBaseSvcInterfaceCreate | current | This notification is generated when a service interface associated with a local device is created. The generation of this notification is controlled by cSanBas… | |
| 1.3.6.1.4.1.9.9.702.0.2 | NotificationciscoSanBaseSvcInterfaceDelete | current | This notification is generated when a service interface associated with a local device is deleted. The generation of this notification is controlled by cSanBas… | |
| 1.3.6.1.4.1.9.9.702.0.3 | NotificationciscoSanBaseSvcClusterNewMaster | current | This notification is generated when the sending device who is participating in a service cluster has transitioned to be the master of the cluster. The generati… | |
| 1.3.6.1.4.1.9.9.702.1 | NodeciscoSanBaseSvcMIBObjects | |||
| 1.3.6.1.4.1.9.9.702.1.1 | NodecSanBaseSvcConfig | |||
| 1.3.6.1.4.1.9.9.702.1.1.1 | TablecSanBaseSvcClusterTable | not-accessible | current | This table lists all the service clusters that are configured on this device. It is important that any service is provided in a fault-tolerant manner. Base Ser… |
| 1.3.6.1.4.1.9.9.702.1.1.1.1 | RowcSanBaseSvcClusterEntry | not-accessible | current | A conceptual row in the cSanBaseSvcClusterTable. Each row represents a service cluster in the system and provides the runtime and configuration information of … |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.1 | ColumncSanBaseSvcClusterId | not-accessible | current | Globally unique index that identifies a service cluster. This index must be generated in such a way that the same value is never reused even after cluster has … |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.2 | ColumncSanBaseSvcClusterName | read-create | current | The name of the service cluster. |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.3 | ColumncSanBaseSvcClusterState | read-only | current | The operational state of the service cluster. |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.4 | ColumncSanBaseSvcClusterMasterInetAddrType | read-only | current | The type of Internet address of the service cluster master. The Internet address of service cluster master is specified by the value of the corresponding insta… |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.5 | ColumncSanBaseSvcClusterMasterInetAddr | read-only | current | The Internet address of the service cluster master device. The type of this Internet address is determined by the value of the corresponding instance of cSanBa… |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.6 | ColumncSanBaseSvcClusterStorageType | read-create | current | This object specifies the storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.7 | ColumncSanBaseSvcClusterRowStatus | read-create | current | The status of this conceptual row. There is no restriction on the value of other columns before a newly created row can be made active. |
| 1.3.6.1.4.1.9.9.702.1.1.1.1.8 | ColumncSanBaseSvcClusterApplication | read-create | current | This object represents the name of the application that is enabled on this cluster. |
| 1.3.6.1.4.1.9.9.702.1.1.2 | TablecSanBaseSvcClusterMembersTable | not-accessible | current | This table lists the information of devices, local or remote, which are members of a service cluster configured on a device. |
| 1.3.6.1.4.1.9.9.702.1.1.2.1 | RowcSanBaseSvcClusterMembersEntry | not-accessible | current | A conceptual row in the cSanBaseSvcClusterMembersTable. Each row represents a member device within a specified service Cluster. |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.1 | ColumncSanBaseSvcClusterMemberInetAddrType | not-accessible | current | The type of Internet address of a cluster member within a specified service cluster. The Internet address of this device is specified by the value of the corre… |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.2 | ColumncSanBaseSvcClusterMemberInetAddr | not-accessible | current | The Internet address of the cluster member device within a specified service cluster. The type of this Internet address is determined by the value of the corre… |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.3 | ColumncSanBaseSvcClusterMemberFabric | read-create | current | This object represents the name of the physical fibre channel fabric in the SAN. A typical SAN deployment consists of a dual fabric topology which corresponds … |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.4 | ColumncSanBaseSvcClusterMemberIsLocal | read-only | current | Identifies if the device is a local or remote member of this cluster. 'true' means this device is a local device. 'false' means this device is a remote device. |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.5 | ColumncSanBaseSvcClusterMemberIsMaster | read-only | current | Indicates if this device is currently the master of the service cluster. The value 'true' means this device is the master. The value 'false' means this device … |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.6 | ColumncSanBaseSvcClusterMemberStorageType | read-create | current | This object specifies the storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.702.1.1.2.1.7 | ColumncSanBaseSvcClusterMemberRowStatus | read-create | current | The status of this conceptual row. There is no restriction on the value of other columns before a newly created row can be made active. When a cluster is delet… |
| 1.3.6.1.4.1.9.9.702.1.1.3 | TablecSanBaseSvcInterfaceTable | not-accessible | current | This table lists all service interfaces on the local device and its corresponding information. |
| 1.3.6.1.4.1.9.9.702.1.1.3.1 | RowcSanBaseSvcInterfaceEntry | not-accessible | current | A conceptual row in the cSanBaseSvcInterfaceTable. Each row represents a particular service interface on a local device. |
| 1.3.6.1.4.1.9.9.702.1.1.3.1.1 | ColumncSanBaseSvcInterfaceIndex | not-accessible | current | A unique Interface index for a service interface on this device. This is the same as ifIndex of the ifTable of RFC1213. |
| 1.3.6.1.4.1.9.9.702.1.1.3.1.2 | ColumncSanBaseSvcInterfaceState | read-only | current | Operational state of this service interface. |
| 1.3.6.1.4.1.9.9.702.1.1.3.1.3 | ColumncSanBaseSvcInterfaceClusterId | read-create | current | Identifies the cluster to which this service interface belongs. |
| 1.3.6.1.4.1.9.9.702.1.1.3.1.4 | ColumncSanBaseSvcInterfaceStorageType | read-create | current | This object specifies the storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.702.1.1.3.1.5 | ColumncSanBaseSvcInterfaceRowStatus | read-create | current | The status of this conceptual row. There is no restriction on the value of other columns before a newly created row can be made active. For example, cSanBaseSv… |
| 1.3.6.1.4.1.9.9.702.1.1.4 | TablecSanBaseSvcDevicePortTable | not-accessible | current | This table lists the devices that are configured to receive storage service. |
| 1.3.6.1.4.1.9.9.702.1.1.4.1 | RowcSanBaseSvcDevicePortEntry | not-accessible | current | A conceptual row in the cSanBaseSvcDevicePortTable. Each row represents a particular device configured to receive storage service in a particular cluster. |
| 1.3.6.1.4.1.9.9.702.1.1.4.1.1 | ColumncSanBaseSvcDevicePortName | not-accessible | current | This object represents Fibre-channel Port name (pWWN) of the Device Nx_Port. |
| 1.3.6.1.4.1.9.9.702.1.1.4.1.2 | ColumncSanBaseSvcDevicePortClusterId | read-create | current | This object represents the cluster identifier of the cluster to which this port belongs. |
| 1.3.6.1.4.1.9.9.702.1.1.4.1.3 | ColumncSanBaseSvcDevicePortStorageType | read-create | current | This object specifies the storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.702.1.1.4.1.4 | ColumncSanBaseSvcDevicePortRowStatus | read-create | current | The status of this conceptual row. There is no restriction on the value of other columns before a newly created row can be made active. |
| 1.3.6.1.4.1.9.9.702.1.1.5 | ScalarcSanBaseSvcConfigTableLastChanged | read-only | current | The value of sysUpTime when a change to any Base Service MIB table other than the cSanBaseSvcDevicePortTable last occurred. |
| 1.3.6.1.4.1.9.9.702.1.1.6 | ScalarcSanBaseSvcDevicePortTableLastChanged | read-only | current | The value of sysUpTime when a change to cSanBaseSvcDevicePortTable last occurred. |
| 1.3.6.1.4.1.9.9.702.1.1.7 | ScalarcSanBaseSvcNotifyEnable | read-write | current | This object specifies if the service notifications should be generated or not. If the value of this object is 'true', then the notifications are generated. If … |
| 1.3.6.1.4.1.9.9.702.1.2 | NodecSanBaseSvcInterface | |||
| 1.3.6.1.4.1.9.9.702.1.2.1 | TablecSanBaseSvcClusterMemberIfTable | not-accessible | current | This table lists the information of service interfaces on all devices, local or remote, which are members of a service cluster configured on a device. |
| 1.3.6.1.4.1.9.9.702.1.2.1.1 | RowcSanBaseSvcClusterMemberIfEntry | not-accessible | current | A conceptual row in the cSanBaseSvcClusterMemberIfTable. Each row represents a participating interface on local/remote device member within the specified servi… |
| 1.3.6.1.4.1.9.9.702.1.2.1.1.1 | ColumncSanBaseSvcClusterInterfaceIndex | not-accessible | current | A unique Interface index for a service interface on a device in this cluster. This is the same as ifIndex of the ifTable of RFC1213. |
| 1.3.6.1.4.1.9.9.702.1.2.1.1.2 | ColumncSanBaseSvcClusterInterfaceState | read-only | current | The operational state of this service interface. |
| 1.3.6.1.4.1.9.9.702.2 | NodeciscoSanBaseSvcMIBConform | |||
| 1.3.6.1.4.1.9.9.702.2.1 | NodeciscoSanBaseSvcMIBCompliances | |||
| 1.3.6.1.4.1.9.9.702.2.1.1 | ComplianceciscoSanBaseSvcMIBCompliance | current | The compliance statement for entities that implement this base service. | |
| 1.3.6.1.4.1.9.9.702.2.2 | NodeciscoSanBaseSvcMIBGroups | |||
| 1.3.6.1.4.1.9.9.702.2.2.1 | GroupciscoSanBaseSvcConfigGroup | current | A collection of objects for storage service configuration. | |
| 1.3.6.1.4.1.9.9.702.2.2.2 | GroupciscoSanBaseSvcNotifControlGroup | current | A collection of objects for controlling storage service notification. | |
| 1.3.6.1.4.1.9.9.702.2.2.3 | GroupciscoSanBaseSvcNotifsGroup | current | A collection of objects for notification of storage service events. | |
| 1.3.6.1.4.1.9.9.702.2.2.4 | GroupciscoSanBaseSvcInterfaceGroup | current | A collection of storage service interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoSanBaseSvcClusterIndex | OCTET STRING (SIZE (8)) | current | This denotes the globally unique index for a service cluster. The value of the CiscoSanBaseSvcClusterIndex is an eight-octet unsigned integer value encoded in a network-byte order. |
| CiscoSanBaseSvcClusterStatus | INTEGER { unknown(1), inactive(2), degraded(3), recovery(4), active(5) } | current | |
| CiscoSanBaseSvcInterfaceStatus | INTEGER { unknown(1), initializing(2), offline(3), online(4) } | current |