CISCO-SANTAP-MIB
31 objects
MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that provides a reliable copy of the data flowing between a set of one or more initiators and a set of one or more targets connected to the fabric. Adminstrator must configure the switch to create the Control Virtual Target (CVT) for the SanTap service. CVTs are used to implement the control path which process all SanTap service requests sent out by an appliance. Prior to requesting for SanTap service the appliance contacts the CVT, specifies the initiator and the target for replicating the data flowing between them. This MIB provides an interface to configure the CVT for the SanTap service on the fibre channel switch modules. Glossary of terms used in this MIB: Fabric - The set of physically connected fibre channel switches. VSAN - Virtual Storage Area Network, similar to a Virtual Fabric as defined by T11. WWN - World Wide Name. Mechanism of uniquely identifying the devices in Fibre Channel Networks. Appliance - It is a storage target, which can requests the SanTap service for the reliable copy of the data flowing between a specific host initiator and a target. CVT - Control Virtual Target. It is a logical target port that resides on the switch and is used for the purpose of communicating control traffic from an appliance. DVT - Data Virtual Target. It is a logical target port that resides on the switch and is used to intercept traffic meant for a real target.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcNameId FcNameIdOrZero VsanIndex |
| CISCO-VSAN-MIB | vsanIndex |
| ENTITY-MIB | PhysicalIndex |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.463 | IdentityciscoSanTapMIB | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that provides a reliable copy of th… | ||
| 1.3.6.1.4.1.9.9.463.1 | NodeciscoSanTapMIBObjects | |||
| 1.3.6.1.4.1.9.9.463.1.1 | TablecstModuleTable | not-accessible | current | A table listing the modules on which SanTap service can be configured and CVT can be created by the user. The entry in the cstServiceConfigTable can only be cr… |
| 1.3.6.1.4.1.9.9.463.1.1.1 | RowcstModuleEntry | not-accessible | current | An entry in this table. The cstModuleId denotes the entPhysicalIndex of the module on which SanTap service can be configured. |
| 1.3.6.1.4.1.9.9.463.1.1.1.1 | ColumncstModuleId | read-only | current | This object specifies the physical index of the entity with entPhysicalClass as 'module' on which SanTap service can be configured by the user. This is same as… |
| 1.3.6.1.4.1.9.9.463.1.2 | TablecstServiceConfigTable | not-accessible | current | This table provides information about the list of all CVTs created and configured in the system. A new entry creation in this table, creates a CVT on the modul… |
| 1.3.6.1.4.1.9.9.463.1.2.1 | RowcstServiceConfigEntry | not-accessible | current | An entry containing information about a CVT configuration for the SanTap service. The 'cstModuleId' denotes the module on which the user wants the SanTap servi… |
| 1.3.6.1.4.1.9.9.463.1.2.1.1 | ColumncstCVTNodeWwn | read-only | current | This object represents the Node World-Wide Name of the CVT created on the module represented by the corresponding entity index 'cstModuleId'. |
| 1.3.6.1.4.1.9.9.463.1.2.1.2 | ColumncstCVTPortWwn | read-only | current | This object represents the Port World-Wide Name of the CVT created on the module represented by the corresponding entity index 'cstModuleId'. |
| 1.3.6.1.4.1.9.9.463.1.2.1.3 | ColumncstServiceConfigRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.9.9.463.1.2.1.4 | ColumncstCVTName | read-create | current | The administratively assigned name for this CVT. |
| 1.3.6.1.4.1.9.9.463.1.3 | TablecstDVTConfigTable | not-accessible | current | This table provides information about the list of all DVTs created and configured in the system. A new entry creation in this table, creates a DVT correspondin… |
| 1.3.6.1.4.1.9.9.463.1.3.1 | RowcstDVTConfigEntry | not-accessible | current | An entry containing information about a DVT configuration for the SanTap service. |
| 1.3.6.1.4.1.9.9.463.1.3.1.1 | ColumncstDVTPortWwn | not-accessible | current | This object represents the port world-wide name of the created DVT. It will be the same as the port world-wide name of the real target for which data is to be … |
| 1.3.6.1.4.1.9.9.463.1.3.1.2 | ColumncstDVTTargetVsan | read-create | current | This object represents the VSAN of the real target for which this DVT is being created. This object MUST be set to a valid value concurrently with setting the … |
| 1.3.6.1.4.1.9.9.463.1.3.1.3 | ColumncstDVTPort | read-create | current | This object represents the port on the module where the DVT will be created. This object MUST be set to a valid value concurrently with setting the correspondi… |
| 1.3.6.1.4.1.9.9.463.1.3.1.4 | ColumncstDVTName | read-create | current | The administratively assigned name for this DVT. |
| 1.3.6.1.4.1.9.9.463.1.3.1.5 | ColumncstDVTRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.9.9.463.1.3.1.6 | ColumncstDVTLunSizeHandling | read-create | current | This object indicates if the DVT should use the real target LUN size for the virtual LUN or the max LUN size supported which is 2TB. A value of false for this … |
| 1.3.6.1.4.1.9.9.463.1.3.1.7 | ColumncstDVTIOTimeout | read-create | current | This object represents the IO timeout value associated with the DVT. This object should be set during the DVT creation time and cannot be modified later. |
| 1.3.6.1.4.1.9.9.463.2 | NodeciscoSanTapMIBConformance | |||
| 1.3.6.1.4.1.9.9.463.2.1 | NodeciscoSanTapMIBCompliances | |||
| 1.3.6.1.4.1.9.9.463.2.1.1 | ComplianceciscoSanTapMIBCompliance | deprecated | Compliance statement for entites which implement the CISCO SANTAP MIB. | |
| 1.3.6.1.4.1.9.9.463.2.1.2 | ComplianceciscoSanTapMIBComplianceRev1 | deprecated | Compliance statement for entites which implement the CISCO SANTAP MIB. | |
| 1.3.6.1.4.1.9.9.463.2.1.3 | ComplianceciscoSanTapMIBComplianceRev2 | current | Compliance statement for entites which implement the CISCO SANTAP MIB. | |
| 1.3.6.1.4.1.9.9.463.2.2 | NodeciscoSanTapMIBGroups | |||
| 1.3.6.1.4.1.9.9.463.2.2.1 | GroupciscoSanTapServiceConfigGroup | deprecated | A Collection of objects to configure the CVT for SanTap service. | |
| 1.3.6.1.4.1.9.9.463.2.2.2 | GroupciscoSanTapServiceConfigGroupRev1 | current | A Collection of objects to configure the CVT for SanTap service. | |
| 1.3.6.1.4.1.9.9.463.2.2.3 | GroupciscoSanTapDVTConfigGroup | deprecated | A Collection of objects to configure the DVT for SanTap service. | |
| 1.3.6.1.4.1.9.9.463.2.2.4 | GroupciscoSanTapDVTConfigGroup1 | current | A Collection of objects to configure the DVT for SanTap service. | |
| 1.3.6.1.4.1.9.9.463.3 | NodeciscoSanTapNotifications |