CISCO-SCSI-FLOW-MIB
99 objects
A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Glossary of terms used in this MIB: ABTS - Abort Sequence. ACA - Acquire Change Authorization. CFS - Cisco Fabric Service is a general mechanism to distribute data within a Storage Area Network. DPP - Data Path Processor. ILC - Intelligent Line Card. LUN - Logical Unit Number is a 64-bit identifier for a logical unit. pWWN - port World Wide Name. nWWN - node World Wide Name. SCSI Initiator - is a device that contains application clients and SCSI initiator ports that originate device service and task management requests to be processed by a target SCSI device. SCSI flow - connection between SCSI initiator and SCSI target. SCSI Target - is a device that contains logical units and SCSI target ports that receive device service and task management requests for processing. SFC - SCSI Flow Client. SFM - SCSI Flow Manager. TCAM - Ternary Content Addressable Memory. VSAN - Virtual Storage Area Network, similar to a VLAN. WWN - World Wide Name. Mechanism of identifying devices in Fibre Channel Networks. It is 8 bytes long.
Imported Objects
| CISCO-SCSI-MIB | ScsiLUNOrZero |
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcNameId VsanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.447 | IdentityciscoScsiFlowMIB | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Glossary of terms used in this MIB:… | ||
| 1.3.6.1.4.1.9.9.447.0 | NodeciscoScsiFlowMIBNotifs | |||
| 1.3.6.1.4.1.9.9.447.0.1 | NotificationciscoScsiFlowVerifyNotify | current | This notification is generated whenever a change occurs in the fabric causing a flow to be valid or invalid. The ciscoScsiFlowNum object specifies the flow and… | |
| 1.3.6.1.4.1.9.9.447.0.2 | NotificationciscoScsiFlowWrAccNotify | current | This notification is generated whenever write acceleration is configured on a flow to indicate the outcome. | |
| 1.3.6.1.4.1.9.9.447.0.3 | NotificationciscoScsiFlowStatsNotify | current | This notification is generated whenever statistics gathering is configured on a flow to indicate the outcome. | |
| 1.3.6.1.4.1.9.9.447.1 | NodeciscoScsiFlowMIBObjects | |||
| 1.3.6.1.4.1.9.9.447.1.1 | NodecsfConfiguration | |||
| 1.3.6.1.4.1.9.9.447.1.1.1 | ScalarciscoScsiFlowNextIndexAvail | read-only | current | This object contains the next available value for the object ciscoScsiFlowId. If all values are exhausted, then this object will contain a 0 value. A managemen… |
| 1.3.6.1.4.1.9.9.447.1.1.2 | TableciscoScsiFlowTable | not-accessible | current | This table allows configuration of SCSI flows. The Initiator should be connected to a port on an Intelligent Line Card on the local switch. The Target device c… |
| 1.3.6.1.4.1.9.9.447.1.1.2.1 | RowciscoScsiFlowEntry | not-accessible | current | An entry, which is uniquely identified by the SCSI flow ID, contains the various attributes of a SCSI flow. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.1 | ColumnciscoScsiFlowId | not-accessible | current | This object represents the flow identifier. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.2 | ColumnciscoScsiFlowIntrWwn | read-create | current | This object represents the pWWN of the Initiator in the flow. This object must be set to a valid value before or concurrently setting the corresponding instanc… |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.3 | ColumnciscoScsiFlowTargetWwn | read-create | current | This object represents the pWWN of the Target in the flow. This object must be set to a valid value before or concurrently setting the corresponding instance o… |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.4 | ColumnciscoScsiFlowIntrVsan | read-create | current | The VSAN ID of the initiator on which the flow is configured. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.5 | ColumnciscoScsiFlowTargetVsan | read-create | current | The VSAN ID of the target on which the flow is configured. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.6 | ColumnciscoScsiFlowAllLuns | read-create | current | If this object is set to 'true', it specifies that all the LUNs on the target are to be included in the flow. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.7 | ColumnciscoScsiFlowWriteAcc | read-create | current | This object specifies if write-acceleration feature is enabled for this flow. If set to 'true' it is enabled. If set to 'false', it is disabled. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.8 | ColumnciscoScsiFlowBufCount | read-create | current | The value of this object is relevant only if the corresponding instance of ciscoScsiFlowWriteAcc has been set to 'true'. It specifies the number of buffers to … |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.9 | ColumnciscoScsiFlowStatsEnabled | read-create | current | This object specifies if the statistics gathering needs to be enabled for this flow. If it is set to 'true', then it is enabled. If it is set to 'false', then … |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.10 | ColumnciscoScsiFlowClearStats | read-create | current | This object assists in clearing the statistics for this flow. If this object is set to 'clear(1)', it results in all statistics for this flow being cleared. No… |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.11 | ColumnciscoScsiFlowIntrVrfStatus | read-only | current | The verification status of the initiator device corresponding to the SCSI Flow. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.12 | ColumnciscoScsiFlowTgtVrfStatus | read-only | current | The verification status of the target device corresponding to the SCSI Flow. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.13 | ColumnciscoScsiFlowIntrLCStatus | read-only | current | The status of the linecard where the SCSI Flow initiator device is located. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.14 | ColumnciscoScsiFlowTgtLCStatus | read-only | current | The status of the linecard where the SCSI Flow target device is located. |
| 1.3.6.1.4.1.9.9.447.1.1.2.1.15 | ColumnciscoScsiFlowRowStatus | read-create | current | The status of this conceptual row. When creating an entry in this table, the management application MUST set values for the corresponding instances of ciscoScs… |
| 1.3.6.1.4.1.9.9.447.1.1.3 | ScalarciscoScsiFlowNum | accessible-for-notify | current | This object indicates the flow ID corresponding to which notifications need to be sent. |
| 1.3.6.1.4.1.9.9.447.1.1.4 | ScalarciscoScsiFlowDeviceType | accessible-for-notify | current | This object indicates whether the notification pertains to an initiator or target. |
| 1.3.6.1.4.1.9.9.447.1.1.5 | ScalarciscoScsiFlowVerifyReasonCode | accessible-for-notify | current | This object indicates the verification reason code to be included in notifications. |
| 1.3.6.1.4.1.9.9.447.1.1.6 | ScalarciscoScsiFlowCfgReasonCode | accessible-for-notify | current | This object indicates the feature configuration reason code to be included in notifications. |
| 1.3.6.1.4.1.9.9.447.1.2 | NodecsfStats | |||
| 1.3.6.1.4.1.9.9.447.1.2.1 | TableciscoScsiFlowStatsTable | not-accessible | current | A table containing statistics related to SCSI flows on active LUNs. Counters in this table pertaining to a flow on a LUN will be populated if the corresponding… |
| 1.3.6.1.4.1.9.9.447.1.2.1.1 | RowciscoScsiFlowStatsEntry | not-accessible | current | An entry (conceptual row) in this table. An entry contains the statistics related to a LUN on a flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.1 | ColumnciscoScsiFlowLunId | not-accessible | current | The LUN ID on this flow on which the statistics are gathered. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.2 | ColumnciscoScsiFlowRdIos | read-only | current | The total number of SCSI read operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.3 | ColumnciscoScsiFlowRdFailedIos | read-only | current | The total number of SCSI read operations that have failed on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.4 | ColumnciscoScsiFlowRdTimeouts | read-only | current | The total number of SCSI read operations that have timed out on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.5 | ColumnciscoScsiFlowRdBlocks | read-only | current | The total number of blocks that have been read on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.6 | ColumnciscoScsiFlowRdMaxBlocks | read-only | current | The maximum number of blocks read across all read operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.7 | ColumnciscoScsiFlowRdMinTime | read-only | current | The minimum response time over all read operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.8 | ColumnciscoScsiFlowRdMaxTime | read-only | current | The maximum response time over all read operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.9 | ColumnciscoScsiFlowRdsActive | read-only | current | The number of read operations that are currently active on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.10 | ColumnciscoScsiFlowWrIos | read-only | current | The total number of SCSI write operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.11 | ColumnciscoScsiFlowWrFailedIos | read-only | current | The total number of SCSI write operations that have failed on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.12 | ColumnciscoScsiFlowWrTimeouts | read-only | current | The total number of SCSI write operations that have timed out on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.13 | ColumnciscoScsiFlowWrBlocks | read-only | current | The total number of blocks that have been written on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.14 | ColumnciscoScsiFlowWrMaxBlocks | read-only | current | The maximum number of blocks written across all write operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.15 | ColumnciscoScsiFlowWrMinTime | read-only | current | The minimum response time over all write operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.16 | ColumnciscoScsiFlowWrMaxTime | read-only | current | The maximum response time over all write operations on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.17 | ColumnciscoScsiFlowWrsActive | read-only | current | The number of write operations that are currently active on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.18 | ColumnciscoScsiFlowTestUnitRdys | read-only | current | The number of test unit ready SCSI commands sent on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.19 | ColumnciscoScsiFlowRepLuns | read-only | current | The number of Report LUN SCSI commands sent on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.20 | ColumnciscoScsiFlowInquirys | read-only | current | The number of SCSI Inquiry commands sent on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.21 | ColumnciscoScsiFlowRdCapacitys | read-only | current | The number of Read Capacity SCSI commands sent on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.22 | ColumnciscoScsiFlowModeSenses | read-only | current | The number of Mode Sense SCSI commands sent on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.23 | ColumnciscoScsiFlowReqSenses | read-only | current | The number of Request Sense SCSI commands sent on LUN on this this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.24 | ColumnciscoScsiFlowRxFc2Frames | read-only | current | The total number of link-level FC frames received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.25 | ColumnciscoScsiFlowTxFc2Frames | read-only | current | The total number of link-level frames transmitted on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.26 | ColumnciscoScsiFlowRxFc2Octets | read-only | current | The total number of octets received in link-level frames on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.27 | ColumnciscoScsiFlowTxFc2Octets | read-only | current | The total number of octets transmitted in link-level frames on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.28 | ColumnciscoScsiFlowBusyStatuses | read-only | current | The number of busy SCSI statuses received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.29 | ColumnciscoScsiFlowStatusResvConfs | read-only | current | The number of reservation conflicts SCSI status received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.30 | ColumnciscoScsiFlowTskSetFulStatuses | read-only | current | The number of task set full SCSI statuses received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.31 | ColumnciscoScsiFlowAcaActiveStatuses | read-only | current | The number of ACA active statuses received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.32 | ColumnciscoScsiFlowSenseKeyNotRdyErrs | read-only | current | The number of NOT READY SCSI SENSE key errors received on this LUN on this flow. This indicates that the logical unit being addressed cannot be accessed. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.33 | ColumnciscoScsiFlowSenseKeyMedErrs | read-only | current | The number of MEDIUM ERROR SCSI SENSE key errors received on this LUN on this flow. This indicates that the command terminated with a non-recovered error condi… |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.34 | ColumnciscoScsiFlowSenseKeyHwErrs | read-only | current | The number of HARDWARE ERROR SCSI SENSE key errors received on this LUN on this flow. This indicates that the target detected a non-recoverable hardware failur… |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.35 | ColumnciscoScsiFlowSenseKeyIllReqErrs | read-only | current | The number of ILLEGAL REQUEST SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.36 | ColumnciscoScsiFlowSenseKeyUnitAttErrs | read-only | current | The number of UNIT ATTENTION SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.37 | ColumnciscoScsiFlowSenseKeyDatProtErrs | read-only | current | The number of DATA PROTECT SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.38 | ColumnciscoScsiFlowSenseKeyBlankErrs | read-only | current | The number of BLANK CHECK SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.39 | ColumnciscoScsiFlowSenseKeyCpAbrtErrs | read-only | current | The number of COPY ABORTED SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.40 | ColumnciscoScsiFlowSenseKeyAbrtCmdErrs | read-only | current | The number of ABORTED COMMAND SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.41 | ColumnciscoScsiFlowSenseKeyVolFlowErrs | read-only | current | The number of VOLUME OVERFLOW SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.42 | ColumnciscoScsiFlowSenseKeyMiscmpErrs | read-only | current | The number of MISCOMPARE SCSI SENSE key errors received on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.2.1.1.43 | ColumnciscoScsiFlowAbts | read-only | current | The number of ABTSs encountered on this LUN on this flow. |
| 1.3.6.1.4.1.9.9.447.1.3 | NodecsfFeatureStatus | |||
| 1.3.6.1.4.1.9.9.447.1.3.1 | TableciscoScsiFlowWrAccStatusTable | not-accessible | current | A table containing status for flows with write-acceleration configured. |
| 1.3.6.1.4.1.9.9.447.1.3.1.1 | RowciscoScsiFlowWrAccStatusEntry | not-accessible | current | An entry (conceptual row) in this table. An entry contains the status for write-acceleration feature of the flow. |
| 1.3.6.1.4.1.9.9.447.1.3.1.1.1 | ColumnciscoScsiFlowWrAccCfgStatus | read-only | current | The configuration status for write-acceleration feature for this flow. |
| 1.3.6.1.4.1.9.9.447.1.3.1.1.2 | ColumnciscoScsiFlowWrAccIntrCfgStatus | read-only | current | The initiator configuration status for write-acceleration feature for this flow. |
| 1.3.6.1.4.1.9.9.447.1.3.1.1.3 | ColumnciscoScsiFlowWrAccTgtCfgStatus | read-only | current | The target configuration status for write-acceleration feature for this flow. |
| 1.3.6.1.4.1.9.9.447.1.3.2 | TableciscoScsiFlowStatsStatusTable | not-accessible | current | A table containing status for flows with statistics configured. |
| 1.3.6.1.4.1.9.9.447.1.3.2.1 | RowciscoScsiFlowStatsStatusEntry | not-accessible | current | An entry (conceptual row) in this table. An entry contains the status for statistics feature of the flow. |
| 1.3.6.1.4.1.9.9.447.1.3.2.1.1 | ColumnciscoScsiFlowStatsCfgStatus | read-only | current | The configuration status for statistics feature for this flow. |
| 1.3.6.1.4.1.9.9.447.1.3.2.1.2 | ColumnciscoScsiFlowStatsIntrCfgStatus | read-only | current | The initiator configuration status for statistics feature for this flow. |
| 1.3.6.1.4.1.9.9.447.1.3.2.1.3 | ColumnciscoScsiFlowStatsTgtCfgStatus | read-only | current | The target configuration status for statistics feature for this flow. |
| 1.3.6.1.4.1.9.9.447.2 | NodeciscoScsiFlowMIBConform | |||
| 1.3.6.1.4.1.9.9.447.2.1 | NodeciscoScsiFlowMIBCompliances | |||
| 1.3.6.1.4.1.9.9.447.2.1.1 | ComplianceciscoScsiFlowMIBCompliance | current | The compliance statement for entities that implement the CISCO-SCSI-FLOW-MIB. | |
| 1.3.6.1.4.1.9.9.447.2.2 | NodeciscoScsiFlowMIBGroups | |||
| 1.3.6.1.4.1.9.9.447.2.2.1 | GroupciscoScsiFlowGroup | current | A set of objects for configuring SCSI flows. | |
| 1.3.6.1.4.1.9.9.447.2.2.2 | GroupciscoScsiFlowStatsGroup | current | A collection of objects for displaying SCSI flow statistics. | |
| 1.3.6.1.4.1.9.9.447.2.2.3 | GroupciscoScsiFlowInfoGroup | current | A collection of notification information objects for notification generation. | |
| 1.3.6.1.4.1.9.9.447.2.2.4 | GroupciscoScsiFlowNotifyGroup | current | A collection of notifications for monitoring SCSI flows. | |
| 1.3.6.1.4.1.9.9.447.2.2.5 | GroupciscoScsiFlowFeatureStatusGroup | current | A collection of objects for monitoring feature status on SCSI flows. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CSFlowCfgReasonCode | INTEGER { success(1), ipcError(2), ipcTimeout(3), sfmGenericError(4), sfcGenericError(5), cfsError(6), cfsTimeout(7), deviceNotOnIlc(8), lcIpcError(9), tcamError(10), ilcAsicDrvError(11), dppError(12), statusNotChecked(13), sfcDBError(14), sfcNoSuchFlow(15), sfcFlowExists(16), dppNoBuffers(17), dppNoMemory(18), dppFlowExists(19) } | current | Represents the reason code associated with SCSI flow feature configuration notifications. success(1) - successful. ipcError(2) - IPC error. ipcTimeout(3) - IPC timeout. sfmGenericError(4) - SCSI Flow Manager error. sfcG… |
| CSFlowDeviceType | INTEGER { initiator(1), target(2) } | current | Represents the type of SCSI device. initiator(1) - the device is a SCSI initiator. target(2) - the device is a SCSI target. |
| CSFlowFeatureCfgReasonCode | INTEGER { success(1), featureCfgFailure(2), flowVerifFailure(3) } | current | Represents the reason code to be used with SCSI flow feature configuration notifications. success(1) - successful. featureCfgFailure(2) - failure in configuring the feature. flowVerifFailure(3) - flow verification failu… |
| CSFlowVerifyReasonCode | INTEGER { success(1), noLicense(2), generalError(3), notInNameServer(4), notInFlogiServer(5), deviceNotOnIlc(6), deviceNotScsi(7), deviceNotInitiator(8), deviceNotTarget(9), deviceNotFibreChannel(10), ipcTimeout(11), cfsError(12), cfsTimeout(13), portsUnprovisioned(14), initTargetZonedOut(15), statusNotChecked(16), initNotInNameServer(17), tgtNotInNameServer(18), tgtNotInFlogiServer(19) } | current | Represents the reason codes associated with SCSI flow verification notifications. success(1) - successful. noLicense(2) - there was no license available. generalError(3) - generic error. notInNameServer(4) - device was … |