CISCO-SLB-MIB
283 objects
The MIB for managing Server Load Balancing Manager(s), such as the Cisco IOS SLB product. This MIB includes instrumentation for the manager-side implementation of the Dynamic Feedback Protocol (DFP). A DFP uses the DFP protocol to communicate with DFP agents in order to obtain information about Servers. This MIB includes the objects required for implementing the load balancer management side of the Server/Application State Protocol (SASP). The load balancer is responsible for registering Members with a SASP-Agent. A Member is an entity that is defined on the load balancer to service Internet traffic. The responsibility of the Agent is to monitor the Members, and report a recommended weight to the load balancer. The weight is then used in load balancing decisions. Acronyms and terms: DFP Dynamic Feedback Protocol SASP Server to Application State Protocol GGSN Gateway GPRS Support Node GPRS General Packet Radio Service GTP GPRS Tunneling Protocol SASP Server/Application State Protocol SGSN Serving GPRS Support Node
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoIpProtocol CiscoPort |
| ENTITY-MIB | entPhysicalParentRelPos |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus StorageType TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.161 | IdentityciscoSlbMIB | The MIB for managing Server Load Balancing Manager(s), such as the Cisco IOS SLB product. This MIB includes instrumentation for the manager-side implementation… | ||
| 1.3.6.1.4.1.9.9.161.1 | NodeciscoSlbMIBObjects | |||
| 1.3.6.1.4.1.9.9.161.1.1 | NodeslbStats | |||
| 1.3.6.1.4.1.9.9.161.1.1.1 | TableslbStatsTable | not-accessible | current | A table of SLB statistics for all local SLB entities. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1 | RowslbStatsTableEntry | not-accessible | current | A list of SLB statistics for a particular SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.1 | ColumnslbEntity | not-accessible | current | The SLB instance reference number for this server. This allows multiple SLB's to exist on the same SNMP system. This object's value generally corresponds to th… |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.2 | ColumnslbStatsUnassistedSwitchingPkts | read-only | current | The number of packets forwarded by the Software Load Balancing manager's software. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.3 | ColumnslbStatsUnassistedSwitchingHCPks | read-only | current | The number of packets forwarded by the Software Load Balancing manager's software. This is the 64-bit version of slbStatsUnassistedPkts. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.4 | ColumnslbStatsAssistedSwitchingPkts | read-only | current | The number of packets handled by SLB which were switched via the highest-performance switching path. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.5 | ColumnslbStatsAssistedSwitchingHCPkts | read-only | current | The number of packets handled by SLB which were switched via the highest-performance switching path. This is the 64-bit version of slbStatsAssistedSwitchingPkt… |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.6 | ColumnslbStatsCreatedConnections | read-only | current | The number of TCP and UDP connections created since SLB was configured. TCP connections are created after seeing a SYN for a connection. UDP connections are cr… |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.7 | ColumnslbStatsCreatedHCConnections | read-only | current | The number of connections created by SLB since it was configured. TCP connections are created after seeing a SYN for a connection. UDP connections are created … |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.8 | ColumnslbStatsEstablishedConnections | read-only | current | The number of connections established through SLB (reached the ESTAB state). TCP connections reach the ESTAB state after a SYN - SYN/ACK exchange. UDP connecti… |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.9 | ColumnslbStatsEstablishedHCConnections | read-only | current | The number of connections established through SLB (reached the ESTAB state). TCP connections reach the ESTAB state after a SYN - SYN/ACK exchange. UDP connecti… |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.10 | ColumnslbStatsDestroyedConnections | read-only | current | The number of TCP and UDP connections destroyed by SLB, either by TCPIP teardown or timeout. UDP connections can only be timed out. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.11 | ColumnslbStatsDestroyedHCConnections | read-only | current | The number of TCP and UDP connections destroyed by SLB, either by TCPIP teardown or timeout. UDP connections can only be timed out. This is the 64-bit version … |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.12 | ColumnslbStatsReassignedConnections | read-only | current | The number of TCP and UDP connections reassigned from one real server to another. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.13 | ColumnslbStatsReassignedHCConnections | read-only | current | The number of TCP and UDP connections reassigned from one real server to another. This is the 64-bit version of slbStatsReassignedConnections. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.14 | ColumnslbStatsZombies | read-only | current | The number of TCP and UDP connections currently in the zombie state waiting for timers to expire. |
| 1.3.6.1.4.1.9.9.161.1.1.1.1.15 | ColumnslbStatsHCZombies | read-only | current | The number of TCP and UDP connections currently in the zombie state waiting for timers to expire. This is the 64-bit version of slbStatsZombies. |
| 1.3.6.1.4.1.9.9.161.1.2 | NodeslbServerFarms | |||
| 1.3.6.1.4.1.9.9.161.1.2.1 | TableslbServerFarmTable | not-accessible | current | This is a table of server farms, each of which is a group of real servers to be used by SLB for load balancing. Columnar objects can be modified when the row i… |
| 1.3.6.1.4.1.9.9.161.1.2.1.1 | RowslbServerFarmTableEntry | not-accessible | current | Information about a particular server farm served by a particular local SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.2.1.1.1 | ColumnslbServerFarmName | not-accessible | current | The name of server farm. |
| 1.3.6.1.4.1.9.9.161.1.2.1.1.2 | ColumnslbServerFarmPredictor | read-only | current | The load balancing algorithm in use by the server farm for its real servers for the local SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.2.1.1.3 | ColumnslbServerFarmNat | read-create | current | The type of NAT employed by the local SLB entity for servers in this server farm. |
| 1.3.6.1.4.1.9.9.161.1.2.1.1.4 | ColumnslbServerFarmNumberOfRealServers | read-create | current | The number of real servers in this server farm. |
| 1.3.6.1.4.1.9.9.161.1.2.1.1.5 | ColumnslbServerFarmBindId | read-create | current | slbServerFarmBindId is used to identify one or more real servers for which slbDfpRealWeight applies to the real server's slbRealOperWeight. The identification … |
| 1.3.6.1.4.1.9.9.161.1.2.1.1.6 | ColumnslbServerFarmRowStatus | read-create | current | The object is used by a management station to create or delete the row entry in slbServerFarmTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.3 | NodeslbRealServers | |||
| 1.3.6.1.4.1.9.9.161.1.3.1 | TableslbRealTable | not-accessible | current | A table of real servers. Columnar objects can be modified when the row is 'active'. Rows can be created and destroyed. Entries are added to this table via slbR… |
| 1.3.6.1.4.1.9.9.161.1.3.1.1 | RowslbRealTableEntry | not-accessible | current | Information about a particular real server in a particular server farm, served by a particular local SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.1 | ColumnslbRealServerFarmName | not-accessible | current | The real server's server farm name. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.2 | ColumnslbRealIpAddress | not-accessible | current | The IP address of real server. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.3 | ColumnslbRealPort | not-accessible | current | The TCP or UDP port of real server. This is used if SLB NAT is configured (see slbServerFarmNat). If SLB is not using NAT, this value will be 0. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.4 | ColumnslbRealState | read-create | current | The current state of real server. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.5 | ColumnslbRealNumberOfConnections | read-only | current | The number TCP and UDP connections currently assigned to this real server. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.6 | ColumnslbRealNumberOfDummyConnections | read-only | current | The current number of idle dummy connections that are not in use but are reserved for this real server to accomplish slow-start. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.7 | ColumnslbRealMaxConnections | read-create | current | The configured maximum number of concurrent connections which SLB will deliver to this real server. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.8 | ColumnslbRealAdminWeight | read-create | current | The user configured weight of the real server for the load-balancing algorithms. A weight of zero indicates that no new connections will be assigned to this re… |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.9 | ColumnslbRealOperWeight | read-only | current | The actual operating weight of the real server used by the load-balancing algorithms. This can be adjusted dynamically by DFP. A weight of zero indicates that … |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.10 | ColumnslbRealMetric | read-only | current | The value used by the least connections load-balancing algorithm. It is the number of connections divided by the actual operating weight. New connections will … |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.11 | ColumnslbRealReassign | read-create | current | The number of consecutive TCP SYNs sent to the real server with no answer before reassigning the connection to another real server. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.12 | ColumnslbRealRetryInterval | read-create | current | The time interval between retries while the server is in the Failed state. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.13 | ColumnslbRealFailedConnections | read-create | current | The number of failed connections after which the real server goes to Failed state. A failed connection is when a SYN timeouts or a RST is received from the rea… |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.14 | ColumnslbRealFailedClients | read-create | current | The number of connections with distinct client IP addresses which need to fail on this real server before it goes to Failed state. A failed connection is when … |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.15 | ColumnslbRealConsecutiveFails | read-only | current | The number of connection failures to this real server without a successful connection. A failed connection is when a SYN timeouts or a RST is received from the… |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.16 | ColumnslbRealTotalFails | read-only | current | The total number of times this real server has failed since the creation of this row. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.17 | ColumnslbRealRowStatus | read-create | current | The object used by a management station to create or delete the row entry in slbRealTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.18 | ColumnslbRealTotalConnections | read-only | current | The number of assigned connections handled by this real server since this server was configured. |
| 1.3.6.1.4.1.9.9.161.1.3.1.1.19 | ColumnslbRealHCTotalConnections | read-only | current | The number of assigned connections handled by this real server since this server was configured. This is the 64-bit version of slbRealTotalConnections. |
| 1.3.6.1.4.1.9.9.161.1.4 | NodeslbVirtualServers | |||
| 1.3.6.1.4.1.9.9.161.1.4.1 | TableslbVirtualServerTable | not-accessible | current | Table of virtual servers. Columnar objects can be modified when the row is 'active'. Rows can be created and destroyed. Entries are added to this table via slb… |
| 1.3.6.1.4.1.9.9.161.1.4.1.1 | RowslbVirtualServerTableEntry | not-accessible | current | Information about a particular virtual server served by a particular local SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.1 | ColumnslbVirtualServerName | not-accessible | current | The name of the virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.2 | ColumnslbVirtualServerState | read-create | current | The state of virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.3 | ColumnslbVirtualIndex | read-only | current | The index assigned to a virtual server, used to correlate connections with virtual servers. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.4 | ColumnslbVirtualIpAddress | read-create | current | The IP address of this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.5 | ColumnslbVirtualPort | read-create | current | The port of this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.6 | ColumnslbVirtualProtocol | read-create | current | The protocol for this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.7 | ColumnslbVirtualService | read-create | current | The service setting for this virtual server. Setting this to other than 'none' results in an association being formed between clients using this service and th… |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.8 | ColumnslbVirtualAdvertise | read-create | current | The setting for virtual address advertising. It is set to 'true' if this virtual server has added a static route to the routing table attracting traffic destin… |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.9 | ColumnslbVirtualFarmName | read-create | current | The name of virtual server farm bound to this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.10 | ColumnslbVirtualDelayTimer | read-create | current | The amount of time this SLB entity will maintain TCP connection context after a connection has terminated. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.11 | ColumnslbVirtualIdleTimer | read-create | current | The amount of time this SLB entity will maintain connection information in the absence of packet activity for a connection. When the service is configured as '… |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.12 | ColumnslbVirtualStickyTimer | read-create | current | The amount of time that a connection's real server is remembered after a connection has terminated. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.13 | ColumnslbVirtualStickyGroup | read-create | current | The group ID associated with the 'sticky group' that this virtual server is placed in. A value of zero indicates that no 'sticky group' is associated with this… |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.14 | ColumnslbVirtualSynguardCount | read-create | current | The number of unanswered SYNs that are allowed to be outstanding to this virtual server. After this number is reached, SYNs are dropped depending on the value … |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.15 | ColumnslbVirtualSynguardPeriod | read-create | current | The interval of time that this virtual server can have outstanding unanswered SYNs. This is used with slbVirtualSynguardCount to limit outstanding SYNs. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.16 | ColumnslbVirtualRowStatus | read-create | current | This object is used by a management station to create or delete the row entry in slbVirtualServerTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.17 | ColumnslbVirtualNumberOfConnections | read-only | current | The number of currently assigned connections being handled by this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.18 | ColumnslbVirtualTotalConnections | read-only | current | The number of assigned connections handled by this virtual server since this server was configured. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.19 | ColumnslbVirtualHCTotalConnections | read-only | current | The number of assigned connections handled by this virtual server since this server was configured. This is the 64-bit version of slbVirtualTotalConnections. |
| 1.3.6.1.4.1.9.9.161.1.4.1.1.20 | ColumnslbVirtualMask | read-create | current | The IP subnet mask which is applied to the address of this virtual server for traffic filtering. |
| 1.3.6.1.4.1.9.9.161.1.4.2 | TableslbVServerInfoTable | not-accessible | current | This table provides information on virtual servers. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1 | RowslbVServerInfoTableEntry | not-accessible | current | An entry in virtual server table. An entry gets created when class map is associated with policy map. An entry gets deleted when a class-map is disassociated w… |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.1 | ColumnslbVServerIndex | not-accessible | current | An unique identifier for the virtual server. This value is unique for a combination of class map and a policy map. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.2 | ColumnslbVServerClassMap | read-only | current | This object contains the class map in which this virtual server is associated with it. A class-map is used to classify a set of traffic with which actions may … |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.3 | ColumnslbVServerPolicyMap | read-only | current | This object identifies the policy map. A policy-map can be used to identify various policies such as security policies or load balancing policies. A class map … |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.4 | ColumnslbVServerState | read-only | current | The state of virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.5 | ColumnslbVServerStateChangeDescr | read-only | current | This object contains the descriptive text qualifying the reason for the value in slbVServerState. Examples: OK Policy not configured Server Farm failed Real Se… |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.6 | ColumnslbVServerNumberOfConnections | read-only | current | The number of currently assigned connections being handled by this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.7 | ColumnslbVServerTotalConnections | read-only | current | The number of assigned connections handled by this virtual server since this server was configured. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.8 | ColumnslbVServerDroppedConnections | read-only | current | The total number of connections dropped by this virtual server due to all reasons. Some of the reasons are - when the interface goes down. - when there are no … |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.9 | ColumnslbVServerClientPacketCounts | read-only | current | The number of packets sent to virtual server from client. Client is a system which sends requests to the virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.10 | ColumnslbVServerPacketCounts | read-only | current | The number of packets sent to virtual server from real server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.11 | ColumnslbVServerClientByteCounts | read-only | current | The number of bytes sent to virtual server from client. Client is a system which sends requests to the virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.12 | ColumnslbVServerByteCounts | read-only | current | The number of bytes sent to virtual-server from real-server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.13 | ColumnslbVServerMaxConnLimitDropCounts | read-only | current | The number of connections dropped after virtual-server reached maximum number of connections. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.14 | ColumnslbVServerConnRateLimitDropCounts | read-only | current | The number of connections dropped if virtual-server receives more number of connections per second than the configured rate limit. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.15 | ColumnslbVServerBWRateLimitDropCounts | read-only | deprecated | The number of connections dropped if accumulated bandwidth in all the connections to virtual-server crosses the configured bandwidth. This object has been depr… |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.16 | ColumnslbVServerBandWidthRateLimitDropCounts | read-only | current | The number of bytes dropped if accumulated bandwidth in all the connections to virtual-server crosses the configured bandwidth. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.17 | ColumnslbVServerL4Decisions | read-only | current | The number of layer4 loadbalance decisions made by this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.18 | ColumnslbVServerL7Decisions | read-only | current | The total number of layer7 loadbalance decisions made by this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.2.1.19 | ColumnslbVServerEstablishedConnections | read-only | current | The total number of successfully established connections to this virtual server. |
| 1.3.6.1.4.1.9.9.161.1.4.3 | TableslbVServerIPTable | not-accessible | current | This table contains the IP Addresses configured for virtual servers. A virtual server can have more than one IP Address configured in it. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1 | RowslbVServerIPTableEntry | not-accessible | current | An entry in the virtual server IP table. Each entry contains virtual server attributes that are used for server loadbalancing decisions. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.1 | ColumnslbVServerObjectIndex | not-accessible | current | The index identifying an entry applicable to the same virtual server identified by slbVServerIndex. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.2 | ColumnslbVServerIpAddressType | read-create | current | The type of IP address configured in slbVServerIpAddress. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.3 | ColumnslbVServerIpAddress | read-create | current | The IP address of the virtual server. The type of IP address is provided in slbVServerIpAddressType. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.4 | ColumnslbVServerIpMask | read-create | current | This object is subnet mask for the slbVServerIpAddress. The IP subnet mask is applied to the address of this virtual server for traffic filtering. The value 0 … |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.5 | ColumnslbVServerProtocol | read-create | current | The protocol for the virtual server IP address. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.6 | ColumnslbVServerPortLow | read-create | current | This object identifies the port number of the virtual server that is used in loadbalancing decisions. This has to be less than or equal to slbVServerPortHigh. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.7 | ColumnslbVServerPortHigh | read-create | current | This object identifies the upper bound of the port number of the virtual server that is used in loadbalancing decisions. This has to be greater than or equal t… |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.8 | ColumnslbVServerStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.161.1.4.3.1.9 | ColumnslbVServerRowStatus | read-create | current | This object is used to create/delete entries in this table. |
| 1.3.6.1.4.1.9.9.161.1.5 | NodeslbConnections | |||
| 1.3.6.1.4.1.9.9.161.1.5.1 | TableslbConnectionTable | not-accessible | current | Table of connections being load-balanced by SLB. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1 | RowslbConnectionTableEntry | not-accessible | current | A list of attributes for a particular SLB connection. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.1 | ColumnslbConnectionIndex | not-accessible | current | The index to internal structures for the connection. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.2 | ColumnslbConnectionVirtualIpAddress | not-accessible | current | The IP address of the virtual server. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.3 | ColumnslbConnectionVirtualPort | not-accessible | current | The port of the virtual server. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.4 | ColumnslbConnectionProtocol | not-accessible | current | The connection protocol. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.5 | ColumnslbConnectionClientIpAddr | not-accessible | current | The client IP address. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.6 | ColumnslbConnectionClientPort | not-accessible | current | The client port. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.7 | ColumnslbConnectionState | read-only | current | The current state of this connection. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.8 | ColumnslbConnectionRealIpAddr | read-only | current | The IP Address of the real server to which this client is being load-balanced. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.9 | ColumnslbConnectionServerPort | read-only | current | The port number at the real server to which this client is being load-balanced. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.10 | ColumnslbConnectionNumCacheEntries | read-only | current | The number of netflow cache entries for this connection. An entry for a terminated connection cannot be deleted while this number is non-zero. |
| 1.3.6.1.4.1.9.9.161.1.5.1.1.11 | ColumnslbConnectionSynCount | read-only | current | The number of SYNs seen from client. |
| 1.3.6.1.4.1.9.9.161.1.6 | NodeslbVirtualClients | |||
| 1.3.6.1.4.1.9.9.161.1.6.1 | TableslbVirtualClientTable | not-accessible | current | Table of virtual clients for a particular virtual server. Columnar objects can be modified when the row is 'active'. Entries are added to this table via slbVir… |
| 1.3.6.1.4.1.9.9.161.1.6.1.1 | RowslbVirtualClientTableEntry | not-accessible | current | Information about a particular client range for a virtual server served by a particular local SLB entity. If client ranges overlap, the entry with the longest … |
| 1.3.6.1.4.1.9.9.161.1.6.1.1.1 | ColumnslbVirtualClientIpAddress | not-accessible | current | The IP address of the client. It is used along with the slbVirtualClientMask to represent subsets of client traffic being handled by the particular virtual ser… |
| 1.3.6.1.4.1.9.9.161.1.6.1.1.2 | ColumnslbVirtualClientMask | not-accessible | current | The general purpose mask of the client. It is used along with the slbVirtualClientIpAddress to represent subsets of client traffic being handled by the particu… |
| 1.3.6.1.4.1.9.9.161.1.6.1.1.3 | ColumnslbVirtualClientExclude | read-create | current | The truth value that determines if the client range should be included or excluded on the virtual server. |
| 1.3.6.1.4.1.9.9.161.1.6.1.1.4 | ColumnslbVirtualClientRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbVirtualClientTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.7 | NodeslbStickyObjects | |||
| 1.3.6.1.4.1.9.9.161.1.7.1 | TableslbStickyObjectTable | not-accessible | current | Table of sticky objects. Sticky objects allow related connections to be sent to the same real server on a per client basis. Sticky objects are useful for FTP a… |
| 1.3.6.1.4.1.9.9.161.1.7.1.1 | RowslbStickyObjectTableEntry | not-accessible | current | Information about a particular sticky object for clients at a particular IP address served by a particular local SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.7.1.1.1 | ColumnslbStickyObjectGroupId | not-accessible | current | The group ID for this sticky object. |
| 1.3.6.1.4.1.9.9.161.1.7.1.1.2 | ColumnslbStickyObjectClientIpAddress | not-accessible | current | The client IP address with which this object is associated. |
| 1.3.6.1.4.1.9.9.161.1.7.1.1.3 | ColumnslbStickyObjectRealIpAddress | read-create | current | The real server IP address selected for all clients bound to this sticky object. |
| 1.3.6.1.4.1.9.9.161.1.7.1.1.4 | ColumnslbStickyObjectConnectionCount | read-only | current | The number of connections currently associated with this sticky object. |
| 1.3.6.1.4.1.9.9.161.1.7.1.1.5 | ColumnslbStickyObjectFtpControlCount | read-only | current | The number of FTP control connections currently associated with this sticky object. |
| 1.3.6.1.4.1.9.9.161.1.7.1.1.6 | ColumnslbStickyObjectRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbStickyObjectTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.8 | NodeslbNotificationObjects | |||
| 1.3.6.1.4.1.9.9.161.1.8.1 | ScalarcSlbVirtStateChangeNotifEnabled | read-write | deprecated | The virtual server notification truth value. 'true' Indicates that ciscoSlbVirtualStateChange notification is to be generated when the state changes. That is, … |
| 1.3.6.1.4.1.9.9.161.1.8.2 | ScalarcSlbRealStateChangeNotifEnabled | read-write | deprecated | The real server notification truth value. 'true' Indicates that ciscoSlbRealStateChange notification is to be generated when the state changes. That is, the no… |
| 1.3.6.1.4.1.9.9.161.1.8.3 | ScalarcSlbVServerStateChangeNotifEnabled | read-write | current | The virtual server notification truth value. This object controls the generation of following notifications: ciscoSlbVServerStateChange ciscoSlbVServerVIPState… |
| 1.3.6.1.4.1.9.9.161.1.8.4 | ScalarcSlbVirtualServerStateChangeNotifEnabled | read-write | current | The virtual server notification truth value. 'true' Indicates that ciscoSlbVirtualServerStateChange notification is to be generated when the state changes. Tha… |
| 1.3.6.1.4.1.9.9.161.1.8.5 | ScalarcSlbRealServerStateChangeNotifEnabled | read-write | current | The real server notification truth value. 'true' Indicates that ciscoSlbRealServerStateChange notification is to be generated when the state changes. That is, … |
| 1.3.6.1.4.1.9.9.161.1.8.6 | ScalarslbInetAddressType | accessible-for-notify | current | The type of IP address configured in slbInetAddress. |
| 1.3.6.1.4.1.9.9.161.1.8.7 | ScalarslbInetAddress | accessible-for-notify | current | This object contains IP address of slb object. Slb object can be a real server identified by slbRealIpAddress or virtual server identified by slbVirtualServerN… |
| 1.3.6.1.4.1.9.9.161.1.8.8 | ScalarslbName | accessible-for-notify | current | This object contains the name of slb object. Slb object can be a real server identified by slbRealIpAddress or virtual server identified by slbVirtualServerNam… |
| 1.3.6.1.4.1.9.9.161.1.8.9 | ScalarslbPort | accessible-for-notify | current | This object contains port value of slb object. Slb object can be a real server identified by slbRealIpAddress or virtual server identified by slbVirtualServerN… |
| 1.3.6.1.4.1.9.9.161.1.9 | NodeslbDfpPassword | |||
| 1.3.6.1.4.1.9.9.161.1.9.1 | TableslbDfpPasswordTable | not-accessible | current | A table of password values which a local Server Load Balancing Manager uses so that it can communicate with remote DFP agents. Entries are added to this table … |
| 1.3.6.1.4.1.9.9.161.1.9.1.1 | RowslbDfpPasswordTableEntry | not-accessible | current | An entry in this table represents the password used by a particular DFP manager (identified by slbEntity) when it exchanges messages with DFP agents. |
| 1.3.6.1.4.1.9.9.161.1.9.1.1.1 | ColumnslbDfpPasswordPending | read-create | current | The pending password which will be used by DFP for MD5 authentication within password timeout ticks. When read, this object returns a zero-length string and wr… |
| 1.3.6.1.4.1.9.9.161.1.9.1.1.2 | ColumnslbDfpPasswordTimeout | read-create | current | The time interval between the setting of the pending password and the removal of the current password. |
| 1.3.6.1.4.1.9.9.161.1.9.1.1.3 | ColumnslbDfpPasswordRowStatus | read-create | current | The object is used by a management station to create or delete the row entry in slbDfpPasswordTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.10 | NodeslbDfpAgents | |||
| 1.3.6.1.4.1.9.9.161.1.10.1 | TableslbDfpAgentTable | not-accessible | current | A table of remote DFP agents with which the local DFP managers communicate. Rows can be created and destroyed. Columnar objects can be modified when the row is… |
| 1.3.6.1.4.1.9.9.161.1.10.1.1 | RowslbDfpAgentTableEntry | not-accessible | current | Information about the communication between a local DFP manager and a particular remote DFP agent. |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.1 | ColumnslbDfpAgentIpAddress | not-accessible | current | The DFP agent's IP address. |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.2 | ColumnslbDfpAgentPort | not-accessible | current | The DFP agent's port. |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.3 | ColumnslbDfpAgentState | read-only | current | The state of the DFP agent. |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.4 | ColumnslbDfpAgentTimeout | read-create | current | Time interval during which the agent must send at least one message to the manager. |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.5 | ColumnslbDfpAgentRetryCount | read-create | current | The number of times the manager will attempt to re-establish a connection with the agent. If this value is exceeded, the agent is placed in 'failed' state, and… |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.6 | ColumnslbDfpAgentInterval | read-create | current | Time interval before SLB retries connecting to a DFP agent. |
| 1.3.6.1.4.1.9.9.161.1.10.1.1.7 | ColumnslbDfpAgentRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbDfpAgentTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.11 | NodeslbDfpReal | |||
| 1.3.6.1.4.1.9.9.161.1.11.1 | TableslbDfpRealTable | not-accessible | current | A table containing information about Real Servers obtained through communications between local DFP manager and remote DFP agents. Rows can be created and dest… |
| 1.3.6.1.4.1.9.9.161.1.11.1.1 | RowslbDfpRealTableEntry | not-accessible | current | Information about a particular real server, within one or more server farms (identified with 'bindId'), reported by a DFP agent for a particular local SLB enti… |
| 1.3.6.1.4.1.9.9.161.1.11.1.1.1 | ColumnslbDfpRealIpAddress | not-accessible | current | The DFP agent's IP address |
| 1.3.6.1.4.1.9.9.161.1.11.1.1.2 | ColumnslbDfpRealProtocol | not-accessible | current | The protocol of the real server. |
| 1.3.6.1.4.1.9.9.161.1.11.1.1.3 | ColumnslbDfpRealPort | not-accessible | current | The port number of the real server. |
| 1.3.6.1.4.1.9.9.161.1.11.1.1.4 | ColumnslbDfpRealBindId | not-accessible | current | The Bind ID identifies one or more server farms to which the real server belongs. The real servers are identified by finding rows in slbServerFarmTable for whi… |
| 1.3.6.1.4.1.9.9.161.1.11.1.1.5 | ColumnslbDfpRealWeight | read-create | current | The weight of the real server reported from a DFP agent. The weight represents a relative capacity to accept new connections. |
| 1.3.6.1.4.1.9.9.161.1.11.1.1.6 | ColumnslbDfpRealRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbDfpRealTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.12 | NodeslbSasp | |||
| 1.3.6.1.4.1.9.9.161.1.12.1 | TableslbSaspTable | not-accessible | current | An entry containing information about the Server Application State Protocol (SASP). There is only one entry for each load balancer. This entry is created by th… |
| 1.3.6.1.4.1.9.9.161.1.12.1.1 | RowslbSaspTableEntry | not-accessible | current | Information for a particular local SLB entity using the SASP functionality. The SASP entry is identified by the slbEntity. The SASP entry includes all of the r… |
| 1.3.6.1.4.1.9.9.161.1.12.1.1.1 | ColumnslbSaspIdentifier | read-write | current | The unique identifier required by SASP for all load balancers. In a redundant system, where there is a master and backup load balancer, each load balancer must… |
| 1.3.6.1.4.1.9.9.161.1.12.1.1.2 | ColumnslbSaspEnabled | read-write | current | Indicates whether the SASP functionality is currently in use by the load balancer. 'true' The SASP functionality is enabled on the load balancer. 'false' The S… |
| 1.3.6.1.4.1.9.9.161.1.12.1.1.3 | ColumnslbSaspHealth | read-only | current | The health value reported to the SASP Agents via the Set Load Balancer State Message. The value represents the load balancer's ability to handle SASP messages. |
| 1.3.6.1.4.1.9.9.161.1.12.1.1.4 | ColumnslbSaspRedundancy | read-only | current | The Load Balancer's state in a redundant setup. The Load Balancer may still contact the SASP Agents, which are defined in the slbSaspAgentTable, regardless of … |
| 1.3.6.1.4.1.9.9.161.1.12.1.1.5 | ColumnslbSaspMaxAgents | read-only | current | The maximum number of SASP Agents that can be configured on the Load Balancer. The SASP Agents are configured via the slbSaspAgentTable. |
| 1.3.6.1.4.1.9.9.161.1.12.1.1.6 | ColumnslbSaspMaxLbWeight | read-only | current | The maximum weight supported by the Load Balancer. Any weight reported for a SASP Member, which can be found within the slbSaspMemberSaspWeight object, MUST be… |
| 1.3.6.1.4.1.9.9.161.1.13 | NodeslbSaspAgents | |||
| 1.3.6.1.4.1.9.9.161.1.13.1 | TableslbSaspAgentTable | not-accessible | current | A table containing information about the SASP Agents. Rows can be created and destroyed. Columnar objects can be modified when the row is 'active'. Entries are… |
| 1.3.6.1.4.1.9.9.161.1.13.1.1 | RowslbSaspAgentTableEntry | not-accessible | current | The SASP Agent entry provides information for a particular SASP Agent on a local SLB entity. The objects provide the contact information and the current connec… |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.1 | ColumnslbSaspAgentIpAddressType | not-accessible | current | Defines the IP address type used by the slbSaspAgentIpAddress. |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.2 | ColumnslbSaspAgentIpAddress | not-accessible | current | The IP address of the SASP Agent that is used for weight reporting. |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.3 | ColumnslbSaspAgentPort | not-accessible | current | The TCP Port number used when connecting to a SASP Agent. |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.4 | ColumnslbSaspAgentLabel | read-create | current | A label that can be assigned by the user for the SASP Agent during entry creation. The label should be in a human readable form that describes the SASP Agent. … |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.5 | ColumnslbSaspAgentState | read-only | current | The current connection state of the SASP Agent. The load balancer does not give up trying to reach the SASP Agent when it is down. |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.6 | ColumnslbSaspAgentLastStateChange | read-only | current | Displays the date and time of the last state change that was incurred by the Agent. The time that is reported is only local time, so the timezone portion of th… |
| 1.3.6.1.4.1.9.9.161.1.13.1.1.7 | ColumnslbSaspAgentRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbSaspAgentTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.14 | NodeslbSaspGroups | |||
| 1.3.6.1.4.1.9.9.161.1.14.1 | TableslbSaspGroupTable | not-accessible | current | A table containing information about the SASP Groups. Rows can be created and destroyed. Entries are added to this table via slbSaspGroupRowStatus. A SASP Grou… |
| 1.3.6.1.4.1.9.9.161.1.14.1.1 | RowslbSaspGroupTableEntry | not-accessible | current | The SASP Group table provides the information for a particular group associated with a SASP Agent on a local SLB entity. |
| 1.3.6.1.4.1.9.9.161.1.14.1.1.1 | ColumnslbSaspGroupName | not-accessible | current | The SASP group represents the group of SASP Members that have the same functional capabilities. |
| 1.3.6.1.4.1.9.9.161.1.14.1.1.2 | ColumnslbSaspGroupRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbSaspGroupTable following the RowStatus textual convention. Removing the … |
| 1.3.6.1.4.1.9.9.161.1.15 | NodeslbSaspMembers | |||
| 1.3.6.1.4.1.9.9.161.1.15.1 | TableslbSaspMemberTable | not-accessible | current | A table containing information about the SASP Members. Rows can be created and destroyed. Columnar objects can be modified when the row is 'active'. Entries ar… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1 | RowslbSaspMemberTableEntry | not-accessible | current | The SASP Member table provides information about a particular SASP Member associated with a SASP Agent. Each entry contains all of the weight information that … |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.1 | ColumnslbSaspMemberIpAddressType | not-accessible | current | Defines the IP address type of the slbSaspMemberIpAddress. |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.2 | ColumnslbSaspMemberIpAddress | not-accessible | current | The IP address of the member. The IP address, along with the port and protocol type, is registered with the SASP Agent. The SASP Agent includes this informatio… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.3 | ColumnslbSaspMemberPort | not-accessible | current | The TCP or UDP port number associated with the slbSaspMemberIpAddress. The port number, along with the IP address and protocol type, is registered with the SAS… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.4 | ColumnslbSaspMemberProtocol | not-accessible | current | The IP protocol type that is associated with the slbSaspMemberIpAddress and slbSaspMemberPort. The protocol type, along with the IP address and port number, is… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.5 | ColumnslbSaspMemberSaspWeight | read-only | current | The reported weight by the SASP Agent. The weights are reported via the 'Send Weights Message' or in the 'Get Weights Reply'. The reported weight MUST be conve… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.6 | ColumnslbSaspMemberConfidentWeight | read-only | current | Represents the SASP Agent's confidence in the reported weight. 'true' Indicates the slbSaspMemberSaspWeight value is accurate and reflects the up-to-date real-… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.7 | ColumnslbSaspMemberConvertedWeight | read-only | current | The SASP weight converted to the local load balancer weight range. The load balancer's weight range is implementation dependent, as is the formula used to conv… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.8 | ColumnslbSaspMemberDefaultWeight | read-create | current | The default weight assigned to the member if any SASP Agent weight reporting failure occurs. If there is a communication failure or if the slbSaspMemberConfide… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.9 | ColumnslbSaspMemberWeightChanges | read-only | current | The total number of times the weight has been modified by the SASP Agent. |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.10 | ColumnslbSaspMemberLastWeightChange | read-only | current | Displays the date and time of the last weight change. The time that is reported is only local time, so the timezone portion of the DateAndTime TC will not be s… |
| 1.3.6.1.4.1.9.9.161.1.15.1.1.11 | ColumnslbSaspMemberRowStatus | read-create | current | The row status is used by a management station to create or delete the row entry in slbSaspMemberTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.161.1.16 | NodeslbSaspStats | |||
| 1.3.6.1.4.1.9.9.161.1.16.1 | TableslbSaspStatsTable | not-accessible | current | A table containing information about the Server Application State Protocol Statistics. Rows are created and destroyed when an entry for the slbSaspAgentTable i… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1 | RowslbSaspStatsTableEntry | not-accessible | current | Each entry corresponds to a SASP Agent from the slbSaspAgentTable. Each entry contains statistics related to the transmitted and received SASP messages. A slbS… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.1 | ColumnslbSaspStatsTxRegMsgs | read-only | current | The total number of SASP Registration Requests transmitted from the load balancer to the SASP Agent. The registration message informs the Agent to start report… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.2 | ColumnslbSaspStatsTxDeregMsgs | read-only | current | The total number of SASP Deregistration Requests transmitted from the load balancer to the SASP Agent. The deregistration message informs the Agent to stop rep… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.3 | ColumnslbSaspStatsTxGetWeightMsgs | read-only | current | The total number of SASP Get Weight Requests transmitted from the load balancer to the SASP Agent. The get weights message is only used when the load balancer … |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.4 | ColumnslbSaspStatsTxSetLBStateMsgs | read-only | current | The total number of SASP Set Load Balancer State Requests transmitted from the load balancer to the SASP Agent. The message is used to inform the SASP Agent of… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.5 | ColumnslbSaspStatsTxSetMemStateMsgs | read-only | current | The total number of SASP Set Member State Requests transmitted from the load balancer to the SASP Agent. This message is used to inform the SASP Agent that a m… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.6 | ColumnslbSaspStatsRxSendWeightMsgs | read-only | current | The total number of SASP Send Weight Messages received from the SASP Agent. This message is used to update the member weights when the load balancer is passive… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.7 | ColumnslbSaspStatsRxRegMsgs | read-only | current | The total number of SASP Registration Replies received from the SASP Agent. This response indicates whether the transmitted registration request was successful… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.8 | ColumnslbSaspStatsRxDeregMsgs | read-only | current | The total number of SASP Deregistration Replies received from the SASP Agent. This response indicates whether the transmitted request was successful, or had a … |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.9 | ColumnslbSaspStatsRxGetWeightMsgs | read-only | current | The total number of SASP Get Weight Replies received from the SASP Agent. This response contains the current weights for the requested members. This message is… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.10 | ColumnslbSaspStatsRxSetLBStateMsgs | read-only | current | The total number of SASP Set Load Balancer State Replies received from the SASP Agent. The response indicates whether the transmitted request was successful, o… |
| 1.3.6.1.4.1.9.9.161.1.16.1.1.11 | ColumnslbSaspStatsRxSetMemStateMsgs | read-only | current | The total number of SASP Set Member State Replies received from the SASP Agent. The response indicates whether the transmitted request was successful, or had a… |
| 1.3.6.1.4.1.9.9.161.2 | NodeciscoSlbMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.161.2.0 | NodeciscoSlbMIBNotifications | |||
| 1.3.6.1.4.1.9.9.161.2.0.1 | NotificationciscoSlbVirtualStateChange | deprecated | The notification generated when a virtual server changes to a new state. The value of slbVirtualServerState indicates the new state. | |
| 1.3.6.1.4.1.9.9.161.2.0.2 | NotificationciscoSlbRealStateChange | deprecated | The notification generated when a real server changes to a new state. The value of slbRealServerState indicates the new state. | |
| 1.3.6.1.4.1.9.9.161.2.0.3 | NotificationciscoSlbSaspStateChange | current | The notification generated when the SASP functionality has been enabled or disabled on the Load Balancer. | |
| 1.3.6.1.4.1.9.9.161.2.0.4 | NotificationciscoSlbSaspAgentStateChange | current | The notification generated when a SASP Agent changes to a new state. | |
| 1.3.6.1.4.1.9.9.161.2.0.5 | NotificationciscoSlbVServerStateChange | current | The notification generated when a virtual server state is changed. | |
| 1.3.6.1.4.1.9.9.161.2.0.6 | NotificationciscoSlbVServerVIPStateChange | current | The notification generated when configuration or association of virtual server IP address(VIP) changes. | |
| 1.3.6.1.4.1.9.9.161.2.0.7 | NotificationciscoSlbVirtualServerStateChange | current | This notification is generated when a virtual server changes to a new state. - entPhysicalParentRelPos contains the slot number of the module. - slbVirtualServ… | |
| 1.3.6.1.4.1.9.9.161.2.0.8 | NotificationciscoSlbRealServerStateChange | current | This notification is generated when a real server changes to a new state. - entPhysicalParentRelPos contains the slot number of the module. - slbRealState cont… | |
| 1.3.6.1.4.1.9.9.161.3 | NodeciscoSlbMIBConformance | |||
| 1.3.6.1.4.1.9.9.161.3.1 | NodeciscoSlbMIBCompliances | |||
| 1.3.6.1.4.1.9.9.161.3.1.1 | ComplianceciscoSlbMIBCompliance | read-only | deprecated | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.1.2 | ComplianceciscoSlbMIBComplianceRev1 | read-only | deprecated | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.1.3 | ComplianceciscoSlbMIBComplianceRev2 | read-only | deprecated | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.1.4 | ComplianceciscoSlbMIBComplianceRev3 | read-only | deprecated | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.1.5 | ComplianceciscoSlbMIBComplianceRev4 | read-only | deprecated | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.1.6 | ComplianceciscoSlbMIBComplianceRev5 | read-only | deprecated | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.1.7 | ComplianceciscoSlbMIBComplianceRev6 | read-only | current | The compliance statement for entities which implement the Cisco SLB MIB |
| 1.3.6.1.4.1.9.9.161.3.2 | NodeciscoSlbMIBGroups | |||
| 1.3.6.1.4.1.9.9.161.3.2.1 | GroupciscoSlbStatsGroup | current | SLB Statistic objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.2 | GroupciscoSlbServerFarmsGroup | current | The SLB serverfarm objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.3 | GroupciscoSlbRealServersGroup | current | The SLB real server objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.4 | GroupciscoSlbVirtualServersGroup | current | The SLB virtual server objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.5 | GroupciscoSlbConnectionsGroup | current | The SLB connection objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.6 | GroupciscoSlbVirtualClientsGroup | current | The SLB virtual client objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.7 | GroupciscoSlbStickyObjectsGroup | current | The SLB sticky objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.8 | GroupciscoSlbDfpPasswordGroup | current | SLB DFP password objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.9 | GroupciscoSlbDfpAgentGroup | current | The SLB DFP agent objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.10 | GroupciscoSlbDfpRealGroup | current | The SLB DFP real server objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.11 | GroupciscoSlbNotifEnabledGroup | deprecated | The SLB Notification Truth Value objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.12 | GroupciscoSlbVirtualServersAddGroup | current | A collection of additional SlbVirtualServer objects used to further define an Slb virtual server. | |
| 1.3.6.1.4.1.9.9.161.3.2.13 | GroupciscoSlbNotifGroup | deprecated | A collection of objects providing SLB notifications. | |
| 1.3.6.1.4.1.9.9.161.3.2.14 | GroupciscoSlbSaspGroup | current | The SLB SASP objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.15 | GroupciscoSlbSaspAgentGroup | current | The SLB SASP Agent objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.16 | GroupciscoSlbSaspGroupGroup | current | The SLB SASP Group objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.17 | GroupciscoSlbSaspMemberGroup | current | The SLB SASP Member objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.18 | GroupciscoSlbSaspStatsGroup | current | A collection of objects providing SLB SASP statistics. | |
| 1.3.6.1.4.1.9.9.161.3.2.19 | GroupciscoSlbSaspNotifGroup | current | A collection of objects providing SASP notifications. | |
| 1.3.6.1.4.1.9.9.161.3.2.21 | GroupciscoSlbVServerInfoGroup | deprecated | The list of objects that are applicable to virtual server statistics. | |
| 1.3.6.1.4.1.9.9.161.3.2.22 | GroupciscoSlbVServerIPGroup | current | The list of objects that are applicable to virtual server identified by IP Address/Port. | |
| 1.3.6.1.4.1.9.9.161.3.2.23 | GroupciscoSlbVServerNotifEnabledGroup | current | The object used for enabling/disabling Virtual Server notifications. | |
| 1.3.6.1.4.1.9.9.161.3.2.24 | GroupciscoSlbVServerNotifGroup | current | A collection of objects providing Virtual Server notifications. | |
| 1.3.6.1.4.1.9.9.161.3.2.25 | GroupciscoSlbNotifObjectsGroup | current | A collection of generic objects that are applicable to slb module. | |
| 1.3.6.1.4.1.9.9.161.3.2.26 | GroupciscoSlbNotifEnabledGroupRev2 | current | The SLB Notification Truth Value objects. | |
| 1.3.6.1.4.1.9.9.161.3.2.27 | GroupciscoSlbNotifGroupRev2 | current | A collection of objects providing SLB notifications. | |
| 1.3.6.1.4.1.9.9.161.3.2.28 | GroupciscoSlbVServerInfoGroupRev1 | deprecated | The list of objects that are applicable to virtual server statistics. | |
| 1.3.6.1.4.1.9.9.161.3.2.29 | GroupciscoSlbVServerInfoGroupRev2 | current | The list of objects that are applicable to virtual server statistics. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SlbConnectionState | INTEGER { init(1), synClient(2), synServer(3), synBoth(4), estab(5), finClient(6), finServer(7), closing(8), zombie(9), conclient(10), conserver(11) } | current | The state for TCP, UDP, and WSP connections being load-balanced by the SLB feature. Each protocol uses a subset of these states. 'init' : Connection has seen traffic and is in the process of being load-balanced. 'synCli… |
| SlbDfpAgentState | INTEGER { notOpen(1), trying(2), connecting(3), open(4), failed(5), securityError(6) } | current | The status of a remote Dynamic Feedback Protocol (DFP) agent as it appears to a local DFP manager. 'notOpen' : The initial state when the DFP Agent block is instantiated. 'trying' : The state when the Agent tries to ope… |
| SlbNatSetting | INTEGER { noNat(1), clientNat(2), serverNat(3), clientAndServerNat(4) } | current | The current network address translation (NAT) setting for a server farm. 'noNat' : The server farm is not configured for NAT. 'clientNat' : The server farm is configured to translate client IP addresses. 'serverNat' : T… |
| SlbPasswordString | OCTET STRING (SIZE (0..32)) | current | The string for the Dynamic Feedback Protocol (DFP) password. A zero-length value when writing this object will unset the password. |
| SlbPredictor | INTEGER { roundRobin(1), leastConns(2), ipHash(3), ipHashSrc(4), ipHashDest(5), urlHash(6), forward(7), leastLoaded(8), httpCookieHash(9), httpHeaderHash(10), layer4PayloadHash(11), responseTime(12), leastBandwidth(13), httpContentHash(14) } | current | The predictor represents the load-balancing algorithm being used on a server farm to distribute load evenly among real servers. 'roundRobin' : assign evenly amongst real servers. 'leastConns' : assign to the real server… |
| SlbRealServerState | INTEGER { outOfService(1), inService(2), failed(3), readyToTest(4), testing(5), maxConnsThrottle(6), maxClientsThrottle(7), dfpThrottle(8), probeFailed(9), probeTesting(10), operWait(11), testWait(12), inbandProbeFailed(13), returnCodeFailed(14), arpFailed(15), standby(16), inactive(17), maxLoad(18) } | current | The server state represents the state of a real server being load-balanced by SLB. 'outOfService' : Server is not in use by SLB as a destination for client connections. This state can be written and read. 'inService' : … |
| SlbSaspAgentState | INTEGER { other(1), initialized(2), closed(3), trying(4), connecting(5), established(6), downTrying(7), downDuplicate(8), down(9) } | current | The status of a remote Server Application State Protocol (SASP) Agent as it appears to a local SASP manager. 'other' : The state the Agent enters when none of the other states apply. 'initialized' : The initial state wh… |
| SlbSaspLBHealth | INTEGER { other(1), idle(2), down(3), saturated(4), overUsed(5), msgLimitReached(6), heavyLoad(7), moderateLoad(8), lightLoad(9), healthy(10) } | current | The Load Balancer Health that is reported to the SASP Agent in the Set Load Balancer State Message. This value represents the load balancers ability to handle SASP messages. 'other' : The load balancer health when none … |
| SlbSaspRedundancy | INTEGER { other(1), master(2), backup(3) } | current | The redundancy state of the Load Balancer. 'other' : The redundant state of the Load Balancer when none of the other states apply. 'master' : The redundant state of the Load Balancer if it is not in a redundant setup, o… |
| SlbServerString | OCTET STRING (SIZE (1..96)) | current | The configured name associated with an SLB object. |
| SlbVirtualService | INTEGER { none(1), ftp(2), wsp(3), gtp(4), rtsp(5) } | current | The special service configured for this virtual server. Such a specification ensures that session(s) for a given protocol are tracked and assigned to the same real machine. These services include: 'ftp' : File Transfer … |
| SlbVirtualServState | INTEGER { outOfService(1), inService(2), standby(3), inOperReal(4), stbInOperReal(5), testReal(6), outOfMemory(7) } | current | The state of SLB virtual server 'outOfService' : Virtual server is not active and is not affecting client traffic in any way. 'inService' : Virtual server is active and is load-balancing matching client traffic to avail… |