CISCO-SONET-MIB
134 objects
The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifDescr ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| SONET-MIB | sonetLineCurrentStatus sonetPathCurrentEntry sonetPathCurrentStatus sonetSectionCurrentStatus sonetVTCurrentStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.126 | IdentityciscoSonetMIB | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). | ||
| 1.3.6.1.4.1.9.9.126.0 | NodeciscoSonetMIBNotifs | |||
| 1.3.6.1.4.1.9.9.126.0.1 | NotificationciscoSonetSectionStatusChange | current | This notification is generated whenever the value of sonetSectionCurrentStatus changes. | |
| 1.3.6.1.4.1.9.9.126.0.2 | NotificationciscoSonetLineStatusChange | current | This notification is generated whenever the value of sonetLineCurrentStatus changes. | |
| 1.3.6.1.4.1.9.9.126.0.3 | NotificationciscoSonetPathStatusChange | current | This notification is generated whenever the value of sonetPathCurrentStatus changes. | |
| 1.3.6.1.4.1.9.9.126.0.4 | NotificationciscoSonetVTStatusChange | current | This notification is generated whenever the value of sonetVTCurrentStatus changes. | |
| 1.3.6.1.4.1.9.9.126.1 | NodeciscoSonetMIBObjects | |||
| 1.3.6.1.4.1.9.9.126.1.1 | NodecsConfig | |||
| 1.3.6.1.4.1.9.9.126.1.1.1 | TablecsConfigTable | not-accessible | current | The SONET/SDH configuration table. This table has objects for configuring sonet lines. |
| 1.3.6.1.4.1.9.9.126.1.1.1.1 | RowcsConfigEntry | not-accessible | current | An entry in the table. There is an entry for each SONET line in the table. Entries are automatically created for an ifType value of sonet(39). 'ifAdminStatus' … |
| 1.3.6.1.4.1.9.9.126.1.1.1.1.1 | ColumncsConfigLoopbackType | read-write | current | This object specifies the desired loopback mode configuration of the SONET line. The possible values of this objects are follows: noLoopback : Not in the loopb… |
| 1.3.6.1.4.1.9.9.126.1.1.1.1.2 | ColumncsConfigXmtClockSource | read-write | current | Specifies the source of the transmit clock. loopTiming: indicates that the recovered receive clock is used as the transmit clock. localTiming: indicates that a… |
| 1.3.6.1.4.1.9.9.126.1.1.1.1.3 | ColumncsConfigFrameScramble | read-write | current | This object is used to disable or enable the Scrambling option in SONET line. |
| 1.3.6.1.4.1.9.9.126.1.1.1.1.4 | ColumncsConfigType | read-only | current | This object represents the configured line type. Sts is SONET format. Stm is SDH format. sonetSts3c : OC3 concatenated sonetStm1 : European standard OC3 sonetS… |
| 1.3.6.1.4.1.9.9.126.1.1.1.1.5 | ColumncsConfigRDIVType | read-write | current | This object specifies the type of RDI-V (Remote Defect Indication - Virtual Tributary/Container) sent by this Network Element (NE) to the remote Network Elemen… |
| 1.3.6.1.4.1.9.9.126.1.1.1.1.6 | ColumncsConfigRDIPType | read-write | current | This object represents the type of RDI-P (Remote Defect Indication - Path) sent by this Network Element (NE) to remote Network Element. onebit : use 1 bit RDI-… |
| 1.3.6.1.4.1.9.9.126.1.1.2 | TablecsVTConfigTable | not-accessible | current | This table contains objects to configure the VT/VC (Virtual Tributary / Virtual Container) related properties of SONET/SDH lines. |
| 1.3.6.1.4.1.9.9.126.1.1.2.1 | RowcsVTConfigEntry | not-accessible | current | There is an entry in this table for each SONET line that supports SONET virtual tributaries or SDH virtual containers. Each entry in this table will have a cor… |
| 1.3.6.1.4.1.9.9.126.1.1.2.1.1 | ColumncsTributaryType | read-write | current | Type of the tributary carried within the SONET/SDH signal. vt15vc11 : carries T1 signal vt2vc12 : carries E1 signal |
| 1.3.6.1.4.1.9.9.126.1.1.2.1.2 | ColumncsTributaryMappingType | read-write | current | This object represents the VT/VC mapping type. asynchronous: In this mode, the channel structure of DS1/E1 is neither visible nor preserved. byteSynchronous: I… |
| 1.3.6.1.4.1.9.9.126.1.1.2.1.3 | ColumncsTributaryFramingType | read-write | current | This object represents the framing type to be assigned to the virtual tributaries in byte sync mapping mode. notApplicable : If VT mapping is not byteSynchrono… |
| 1.3.6.1.4.1.9.9.126.1.1.2.1.4 | ColumncsSignallingTransportMode | read-write | current | This object represents the mode used to transport DS0 signalling information for T1 byteSynchronous mapping (GR253). In signallingTransferMode(2), the robbed-b… |
| 1.3.6.1.4.1.9.9.126.1.1.2.1.5 | ColumncsTributaryGroupingType | read-write | current | This object represents the method used to group VCs into an STM-1 signal. Applicable only to SDH. au3Grouping: STM1<-AU-3<-TUG-2<-TU-12<-VC12 or STM1<-AU-3<-TU… |
| 1.3.6.1.4.1.9.9.126.1.2 | NodecsApsConfig | |||
| 1.3.6.1.4.1.9.9.126.1.2.1 | TablecsApsConfigTable | not-accessible | current | This table contains objects to configure APS (Automatic Protection Switching) feature in a SONET Line. APS is the ability to configure a pair of SONET lines fo… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1 | RowcsApsConfigEntry | not-accessible | current | An entry is created when an APS pair is configured. To create an entry, the following objects must be specified: csApsWorkingIndex, csApsProtectionIndex, csAps… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.1 | ColumncsApsWorkingIndex | not-accessible | current | When a pair of APS lines is configured, one line has to be the working line, which is the primary line, and the other has to be the protection line, which is t… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.2 | ColumncsApsProtectionIndex | read-write | current | The protection line indicates that it will become the active line when an APS switch occurs (APS switch could occur because of a failure on the working line). … |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.3 | ColumncsApsEnable | read-write | current | This object is used to enable or disable the APS feature on the working/protection line pairs. When enabled, the hardware will automatically switch the active … |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.4 | ColumncsApsArchMode | read-write | current | This object is used to configure APS architecture mode on the working/protection line pairs. All of the following are supported on single slot. oneToOne(2) is … |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.5 | ColumncsApsActiveLine | read-only | current | This object indicates which line is currently active. It could be the working line(Section 1 for Annex B), the protection line(Section 2 for Annex B) or none i… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.6 | ColumncsApsSigFaultBER | read-write | current | This object contains the Bit Error Rate threshold for Signal Fault detection on the working line. Once this threshold is exceeded, an APS switch will occur. Th… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.7 | ColumncsApsSigDegradeBER | read-write | current | This object contains the Bit Error Rate threshold for Signal Degrade detection on the working line. Once this threshold is exceeded, an APS switch will occur. … |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.8 | ColumncsApsWaitToRestore | read-write | current | This object contains interval in minutes to wait before attempting to switch back to working line. Not applicable if the line is configured in non-revertive mo… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.9 | ColumncsApsDirection | read-write | current | This object is used to configure the switching direction which this APS line supports. Unidirectional : APS switch only in one direction. Bidirectional : APS s… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.10 | ColumncsApsRevertive | read-write | current | This object is used to configure the APS revertive or nonrevertive option. revertive : Will switch the working line back to active state after the Wait-To-rest… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.11 | ColumncsApsDirectionOperational | read-only | current | This object shows the actual APS direction that is implemented on the Near End terminal. APS direction configured through csApsDirection is negotiated with the… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.12 | ColumncsApsArchModeOperational | read-only | current | This object shows the actual APS architecture mode that is implemented on the Near End terminal. APS architecture mode configured through csApsArchMode object … |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.13 | ColumncsApsChannelProtocol | read-write | current | This object allows to configure APS channel protocol to be implemented at Near End terminal. K1 and K2 overhead bytes in a SONET signal are used as an APS chan… |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.14 | ColumncsApsFailureStatus | read-only | current | This object indicates APS line failure status. |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.15 | ColumncsApsSwitchReason | read-only | current | This object indicates APS line switch reason. |
| 1.3.6.1.4.1.9.9.126.1.2.1.1.16 | ColumncsApsPrimarySection | read-only | current | This object indicates which working section is the APS primary section. In G.783 AnnexB, the K1/K2 Bytes are received on the secondary Section. All the Switch … |
| 1.3.6.1.4.1.9.9.126.1.2.2 | ScalarcsApsLineFailureCode | read-only | current | The object indicates the APS line failure code. This is the failure encountered by the APS line. Refer to CsApsLineFailureCode TC for failure code definitions.… |
| 1.3.6.1.4.1.9.9.126.1.2.3 | ScalarcsApsLineSwitchReason | read-only | current | This object indicates the APS line switch reason. When the working line on one end fails, its other end is told to do an APS switch. Refer to CsApsLineSwitchRe… |
| 1.3.6.1.4.1.9.9.126.1.3 | NodecsSection | |||
| 1.3.6.1.4.1.9.9.126.1.3.1 | TablecssTotalTable | not-accessible | current | The SONET/SDH Section Total table. It contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. The object '… |
| 1.3.6.1.4.1.9.9.126.1.3.1.1 | RowcssTotalEntry | not-accessible | current | An entry in the SONET/SDH Section Total table. Entries are created automatically for sonet lines. |
| 1.3.6.1.4.1.9.9.126.1.3.1.1.1 | ColumncssTotalESs | read-only | current | The number of Errored Seconds encountered by a SONET/SDH Section in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.3.1.1.2 | ColumncssTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by a SONET/SDH Section in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.3.1.1.3 | ColumncssTotalSEFSs | read-only | current | The number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.3.1.1.4 | ColumncssTotalCVs | read-only | current | The number of Coding Violations encountered by a SONET/SDH Section in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.3.2 | TablecssTraceTable | not-accessible | current | The SONET/SDH Section Trace table. This table contains objects for tracing the sonet section. |
| 1.3.6.1.4.1.9.9.126.1.3.2.1 | RowcssTraceEntry | not-accessible | current | An entry in the trace table. Entries exist for active sonet lines. The objects in this table are used to verify continued connection between the two ends of th… |
| 1.3.6.1.4.1.9.9.126.1.3.2.1.1 | ColumncssTraceToTransmit | read-write | current | Sonet Section Trace To Transmit. This is string that is transmitted to perform Sonet section trace diagnostics. The trace string is repetitively transmited so … |
| 1.3.6.1.4.1.9.9.126.1.3.2.1.2 | ColumncssTraceToExpect | read-write | current | Sonet Section Trace To Expect. The receiving terminal verifies if the incoming string matches this string. The value of 'cssTraceFailure' indicates whether a t… |
| 1.3.6.1.4.1.9.9.126.1.3.2.1.3 | ColumncssTraceFailure | read-only | current | The value of this object is set to 'true' when Sonet Section received trace does not match the 'cssTraceToExpect'. |
| 1.3.6.1.4.1.9.9.126.1.3.2.1.4 | ColumncssTraceReceived | read-only | current | This object is used to view the Sonet Section Trace that is received by the receiving terminal. |
| 1.3.6.1.4.1.9.9.126.1.4 | NodecsLine | |||
| 1.3.6.1.4.1.9.9.126.1.4.1 | TablecslTotalTable | not-accessible | current | The SONET/SDH Line Total table. It contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. The object 'son… |
| 1.3.6.1.4.1.9.9.126.1.4.1.1 | RowcslTotalEntry | not-accessible | current | An entry in the SONET/SDH Line Total table. Entries are created automatically for sonet lines. |
| 1.3.6.1.4.1.9.9.126.1.4.1.1.1 | ColumncslTotalESs | read-only | current | The number of Errored Seconds encountered by a SONET/SDH Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.1.1.2 | ColumncslTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by a SONET/SDH Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.1.1.3 | ColumncslTotalCVs | read-only | current | The number of Coding Violations encountered by a SONET/SDH Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.1.1.4 | ColumncslTotalUASs | read-only | current | The number of Unavailable Seconds encountered by a SONET/SDH Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.2 | TablecslFarEndTotalTable | not-accessible | current | The SONET/SDH Far End Line Total table. It contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. The obj… |
| 1.3.6.1.4.1.9.9.126.1.4.2.1 | RowcslFarEndTotalEntry | not-accessible | current | An entry in the SONET/SDH Far End Line Total table. Entries are created automatically for sonet lines. |
| 1.3.6.1.4.1.9.9.126.1.4.2.1.1 | ColumncslFarEndTotalESs | read-only | current | The number of Errored Seconds encountered by a SONET/SDH Far End Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.2.1.2 | ColumncslFarEndTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by a SONET/SDH Far End Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.2.1.3 | ColumncslFarEndTotalCVs | read-only | current | The number of Coding Violations encountered by a SONET/SDH Far End Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.4.2.1.4 | ColumncslFarEndTotalUASs | read-only | current | The number of Unavailable Seconds encountered by a SONET/SDH Far End Line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5 | NodecsPath | |||
| 1.3.6.1.4.1.9.9.126.1.5.1 | TablecspTotalTable | not-accessible | current | The SONET/SDH Path Total table. It contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.The object 'sone… |
| 1.3.6.1.4.1.9.9.126.1.5.1.1 | RowcspTotalEntry | not-accessible | current | An entry in the SONET/SDH Path Total table. Entries are created automatically for sonet lines. |
| 1.3.6.1.4.1.9.9.126.1.5.1.1.1 | ColumncspTotalESs | read-only | current | The number of Errored Seconds encountered by a SONET/SDH Path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.1.1.2 | ColumncspTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by a SONET/SDH Path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.1.1.3 | ColumncspTotalCVs | read-only | current | The number of Coding Violations encountered by a SONET/SDH Path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.1.1.4 | ColumncspTotalUASs | read-only | current | The number of Unavailable Seconds encountered by a SONET/SDH Path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.2 | TablecspFarEndTotalTable | not-accessible | current | The SONET/SDH Far End Path Total table. Far End is the remote end of the line. The table contains the cumulative sum of the various statistics for the 24 hour … |
| 1.3.6.1.4.1.9.9.126.1.5.2.1 | RowcspFarEndTotalEntry | not-accessible | current | An entry in the SONET/SDH Far End Path Total table. Entries are created automatically for sonet lines. |
| 1.3.6.1.4.1.9.9.126.1.5.2.1.1 | ColumncspFarEndTotalESs | read-only | current | The number of Errored Seconds encountered by a SONET/SDH far end path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.2.1.2 | ColumncspFarEndTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by a SONET/SDH far end path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.2.1.3 | ColumncspFarEndTotalCVs | read-only | current | The number of Coding Violations encountered by a SONET/SDH far end path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.2.1.4 | ColumncspFarEndTotalUASs | read-only | current | The number of Unavailable Seconds encountered by a SONET/SDH far end path in the last 24 hours. |
| 1.3.6.1.4.1.9.9.126.1.5.3 | TablecspTraceTable | not-accessible | current | The SONET/SDH Path Trace table. This table contains objects for tracing the sonet path. |
| 1.3.6.1.4.1.9.9.126.1.5.3.1 | RowcspTraceEntry | not-accessible | current | An entry in the SONET/SDH Path Trace table. The entries exist for active sonet lines. The objects in this table are used to verify continued connection between… |
| 1.3.6.1.4.1.9.9.126.1.5.3.1.1 | ColumncspTraceToTransmit | read-write | current | Sonet Path Trace To Transmit. The trace string is repetitively transmited so that a trace receiving terminal can verify its continued receiving terminal can ve… |
| 1.3.6.1.4.1.9.9.126.1.5.3.1.2 | ColumncspTraceToExpect | read-write | current | Sonet Path Trace To Expect. The receiving terminal verifies if the incoming string matches this string. The value of 'cspTraceFailure' indicates whether a trac… |
| 1.3.6.1.4.1.9.9.126.1.5.3.1.3 | ColumncspTraceFailure | read-only | current | The value of this object is set to 'true' when Sonet Path received trace does not match the 'cspTraceToExpect'. |
| 1.3.6.1.4.1.9.9.126.1.5.3.1.4 | ColumncspTraceReceived | read-only | current | This object is used to view the Sonet Path Trace that is received by the receiving terminal. |
| 1.3.6.1.4.1.9.9.126.1.6 | NodecsStats | |||
| 1.3.6.1.4.1.9.9.126.1.6.1 | TablecsStatsTable | not-accessible | current | The SONET/SDH Section statistics table. This table maintains the number of times the line encountered Loss of Signal(LOS), Loss of frame(LOF), Alarm Indication… |
| 1.3.6.1.4.1.9.9.126.1.6.1.1 | RowcsStatsEntry | not-accessible | current | An entry in the SONET/SDH statistics table. These are realtime statistics for the Sonet section, line and path layers. The statistics are gathered for each son… |
| 1.3.6.1.4.1.9.9.126.1.6.1.1.1 | ColumncssLOSs | read-only | current | The number of Loss of signals(LOS) encountered by a SONET/SDH Section. A high value for this object may indicate a problem with the Sonet Section layer. |
| 1.3.6.1.4.1.9.9.126.1.6.1.1.2 | ColumncssLOFs | read-only | current | The number of Loss of Frames (LOF) encountered by a SONET/SDH Section. A high value for this object may indicate a problem with the Sonet Section layer. |
| 1.3.6.1.4.1.9.9.126.1.6.1.1.3 | ColumncslAISs | read-only | current | The number of alarm indication signals(AIS) encountered by a SONET/SDH Line. A high value for this object may indicate a problem with the Sonet Line layer. |
| 1.3.6.1.4.1.9.9.126.1.6.1.1.4 | ColumncslRFIs | read-only | current | The number of remote failure indications (RFI) encountered by a SONET/SDH Line. A high value for this object may indicate a problem with the Sonet Line layer. |
| 1.3.6.1.4.1.9.9.126.1.6.1.1.5 | ColumncspAISs | read-only | current | The number of alarm indication signals (AIS) encountered by a SONET/SDH Path. A high value for this object may indicate a problem with the Sonet Path layer. |
| 1.3.6.1.4.1.9.9.126.1.6.1.1.6 | ColumncspRFIs | read-only | current | The number of remote failure indications (RFI) encountered by a SONET/SDH Path. A high value for this object may indicate a problem with the Sonet Path layer. |
| 1.3.6.1.4.1.9.9.126.1.7 | NodecspConfig | |||
| 1.3.6.1.4.1.9.9.126.1.7.1 | TablecspConfigTable | not-accessible | current | Cisco extension to SONET Path current table. |
| 1.3.6.1.4.1.9.9.126.1.7.1.1 | RowcspConfigEntry | not-accessible | current | An entry in Cisco extension to the SONET path current table. |
| 1.3.6.1.4.1.9.9.126.1.7.1.1.1 | ColumncspSonetPathPayload | read-write | current | Specifies the payload carried by the SONET/SDH Path. The payload specification corresponds to C2 (Signal Label) overhead byte in SONET/SDH Path Overhead: unequ… |
| 1.3.6.1.4.1.9.9.126.1.7.1.1.2 | ColumncspTributaryMappingType | read-write | current | This object represents the VT/VC mapping type. asynchronous: In this mode, the channel structure of DS1/E1 is neither visible nor preserved. byteSynchronous: I… |
| 1.3.6.1.4.1.9.9.126.1.7.1.1.3 | ColumncspSignallingTransportMode | read-write | current | This object represents the mode used to transport DS0 Signalling information for T1 byteSynchronous mapping (GR253). In signallingTransferMode(2), the robbed-b… |
| 1.3.6.1.4.1.9.9.126.1.7.1.1.4 | ColumncspTributaryGroupingType | read-write | current | This object represents the method used to group VCs into an STM-1 signal. Applicable only to SDH. au3Grouping: STM1<-AU-3<-TUG-2<-TU-12<-VC12 or STM1<-AU-3<-TU… |
| 1.3.6.1.4.1.9.9.126.1.8 | NodecsNotifications | |||
| 1.3.6.1.4.1.9.9.126.1.8.1 | ScalarcsNotificationsEnabled | read-write | current | This object controls if the generation of ciscoSonetSectionStatusChange, ciscoSonetLineStatusChange, ciscoSonetPathStatusChange and ciscoSonetVTStatusChange no… |
| 1.3.6.1.4.1.9.9.126.1.9 | NodecsAu4Tug3Config | |||
| 1.3.6.1.4.1.9.9.126.1.9.1 | TablecsAu4Tug3ConfigTable | not-accessible | current | This table contains objects to configure the VC( Virtual Container) related properties of a TUG-3 within a AU-4 paths. This table allows creation of following … |
| 1.3.6.1.4.1.9.9.126.1.9.1.1 | RowcsAu4Tug3ConfigEntry | not-accessible | current | There is an entry in this table for each TUG-3 within a AU-4 SDH path that supports SDH virtual container VC-4. The ifIndex value represents an entry in ifTabl… |
| 1.3.6.1.4.1.9.9.126.1.9.1.1.1 | ColumncsAu4Tug3 | not-accessible | current | This object represents the TUG-3 number. |
| 1.3.6.1.4.1.9.9.126.1.9.1.1.2 | ColumncsAu4Tug3Payload | read-write | current | This object is used for configuring the payload for the tributary group. The possible values are : vc11 : When set to 'vc11' following things are done: - 28 en… |
| 1.3.6.1.4.1.9.9.126.3 | NodeciscoSonetMIBConformance | |||
| 1.3.6.1.4.1.9.9.126.3.1 | NodeciscoSonetMIBCompliances | |||
| 1.3.6.1.4.1.9.9.126.3.1.1 | ComplianceciscoSonetMIBCompliance | not-accessible | deprecated | The Compliance statement for ciscoSonet management group. |
| 1.3.6.1.4.1.9.9.126.3.1.2 | ComplianceciscoSonetMIBCompliance1 | not-accessible | deprecated | The Compliance statement for ciscoSonet management group. |
| 1.3.6.1.4.1.9.9.126.3.1.3 | ComplianceciscoSonetMIBCompliance2 | not-accessible | deprecated | The Compliance statement for ciscoSonet management group. |
| 1.3.6.1.4.1.9.9.126.3.1.4 | ComplianceciscoSonetMIBCompliance3 | not-accessible | current | The Compliance statement for ciscoSonet management group. |
| 1.3.6.1.4.1.9.9.126.3.2 | NodeciscoSonetMIBGroups | |||
| 1.3.6.1.4.1.9.9.126.3.2.1 | GroupciscoSonetConfMIBGroup | deprecated | Objects used for configuring Sonet lines. | |
| 1.3.6.1.4.1.9.9.126.3.2.2 | GroupciscoSonetStatsMIBGroup | current | These are objects related to Sonet line statistics. | |
| 1.3.6.1.4.1.9.9.126.3.2.3 | GroupciscoSonetTraceMIBGroup | current | Objects related to Sonet line connectivity. | |
| 1.3.6.1.4.1.9.9.126.3.2.4 | GroupciscoSonetApsMIBGroup | deprecated | Objects used for configuring APS over Sonet lines. | |
| 1.3.6.1.4.1.9.9.126.3.2.5 | GroupciscoSonetApsMIBGroup1 | current | Objects used for configuring APS over Sonet lines. This group includes 3 new objects in addition to those in the deprecated group ciscoSonetApsMIBGroup. | |
| 1.3.6.1.4.1.9.9.126.3.2.6 | GroupciscoSonetConfMIBGroup1 | current | Objects used for configuring Sonet lines. | |
| 1.3.6.1.4.1.9.9.126.3.2.7 | GroupciscoSonetVTConfMIBGroup | current | Objects used for configuring Sonet Virtual tributaries. | |
| 1.3.6.1.4.1.9.9.126.3.2.8 | GroupciscoSonetPathConfMIBGroup | current | Objects used for configuring Sonet Paths. | |
| 1.3.6.1.4.1.9.9.126.3.2.9 | GroupciscoSonetNotifEnableGroup | current | The collection of objects which enable notifications. | |
| 1.3.6.1.4.1.9.9.126.3.2.10 | GroupciscoSonetSectionNotifGroup | current | The collection of Section notifications which are required to be implemented. | |
| 1.3.6.1.4.1.9.9.126.3.2.11 | GroupciscoSonetLineNotifGroup | current | The collection of Line notifications which are required to be implemented. | |
| 1.3.6.1.4.1.9.9.126.3.2.12 | GroupciscoSonetPathNotifGroup | current | The collection of Path notifications which are required to be implemented. | |
| 1.3.6.1.4.1.9.9.126.3.2.13 | GroupciscoSonetVTNotifGroup | current | The collection of VT notifications which are required to be implemented. | |
| 1.3.6.1.4.1.9.9.126.3.2.14 | GroupciscoSonetPathConfMIBGroup1 | current | Objects used for configuring Sonet Paths. | |
| 1.3.6.1.4.1.9.9.126.3.2.15 | GroupciscoSonetAu4Tug3Group | current | Objects used for configuring AU-4:TUG-3 paths. |