CISCO-SSM-PROV-MIB
27 objects
This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a contiguous set of ports. Each DPP can run one or more features independent of other DPPs on the module. Since the concept of a DPP is transparent to the network manager, ranges of ports are used to configure different features. A start and an end port are specified to identify a DPP and provision a feature.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.448 | IdentityciscoSsmProvMIB | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a contiguous set of ports. Each D… | ||
| 1.3.6.1.4.1.9.9.448.1 | NodeciscoSsmProvMIBObjects | |||
| 1.3.6.1.4.1.9.9.448.1.1 | NodessmProvConfiguration | |||
| 1.3.6.1.4.1.9.9.448.1.1.1 | TablessmProvFeatureTable | not-accessible | current | A table containing list of features that can be provisioned on an SSM. |
| 1.3.6.1.4.1.9.9.448.1.1.1.1 | RowssmProvFeatureEntry | not-accessible | current | An entry in the ssmProvFeatureTable that contains information on the features that can be configured on an SSM. |
| 1.3.6.1.4.1.9.9.448.1.1.1.1.1 | ColumnssmProvFeatureName | not-accessible | current | The name of the feature that can be provisioned on the SSM. |
| 1.3.6.1.4.1.9.9.448.1.1.1.1.2 | ColumnssmProvFeatureNeedsImage | read-only | current | The object indicates if the feature needs an image name to be specified during provisioning. If the value of this object is 'true', then an image needs to be s… |
| 1.3.6.1.4.1.9.9.448.1.1.2 | TablessmProvFeatureIfTable | not-accessible | current | A table containing feature related information for interfaces. This table gives a list of interfaces that are assigned to different features. The interfaces su… |
| 1.3.6.1.4.1.9.9.448.1.1.2.1 | RowssmProvFeatureIfEntry | not-accessible | current | This contains information on the SSM-feature membership of a interface. |
| 1.3.6.1.4.1.9.9.448.1.1.2.1.1 | ColumnssmProvFeatureIfStartPort | not-accessible | current | The starting interface index on the SSM card to which a feature is going to be assigned. A feature is assigned to a DPP by specifying a starting and ending por… |
| 1.3.6.1.4.1.9.9.448.1.1.2.1.2 | ColumnssmProvFeatureIfEndPort | not-accessible | current | The end interface index on the SSM card to which a feature is going to be assigned. A feature is assigned to a DPP by specifying a start and end port. |
| 1.3.6.1.4.1.9.9.448.1.1.2.1.3 | ColumnssmProvFeatureIfFeatureName | not-accessible | current | The SSM feature name bound to the interface. This must be one of the features listed in ssmProvFeatureTable. |
| 1.3.6.1.4.1.9.9.448.1.1.2.1.4 | ColumnssmProvFeatureIfForceRemove | read-create | current | This object indicates if the provisioning should be forcefully removed. The object must be set concurrently with setting the corresponding instance of ssmProvF… |
| 1.3.6.1.4.1.9.9.448.1.1.2.1.5 | ColumnssmProvFeatureIfPartnerImageURI | read-create | current | The object representing the location on the local system, from where the partner image will be picked for installation. The value of this object is only releva… |
| 1.3.6.1.4.1.9.9.448.1.1.2.1.6 | ColumnssmProvFeatureIfRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.9.9.448.1.1.3 | TablessmProvDppTable | not-accessible | current | A table containing DPP information for interfaces. This table gives a list of DPPs for every interface. Entries get added to the table when an SSM comes online… |
| 1.3.6.1.4.1.9.9.448.1.1.3.1 | RowssmProvDppEntry | not-accessible | current | This contains information on the DPP to interface association. |
| 1.3.6.1.4.1.9.9.448.1.1.3.1.1 | ColumnssmProvDppStartPort | not-accessible | current | The starting interface index on the SSM card that corresponds to a DPP. |
| 1.3.6.1.4.1.9.9.448.1.1.3.1.2 | ColumnssmProvDppEndPort | read-only | current | The ending interface index on the SSM card that corresponds to a DPP. |
| 1.3.6.1.4.1.9.9.448.1.1.3.1.3 | ColumnssmProvDppName | read-only | current | The DPP that is associated with the given starting and ending interface. |
| 1.3.6.1.4.1.9.9.448.2 | NodeciscoSsmProvMIBConform | |||
| 1.3.6.1.4.1.9.9.448.2.1 | NodessmProvMIBCompliances | |||
| 1.3.6.1.4.1.9.9.448.2.1.1 | CompliancessmProvMIBCompliance | current | The compliance statement for entities which implement this MIB. | |
| 1.3.6.1.4.1.9.9.448.2.2 | NodessmProvMIBGroups | |||
| 1.3.6.1.4.1.9.9.448.2.2.1 | GroupssmProvFeatureGroup | current | A collection of objects related to SSM features. | |
| 1.3.6.1.4.1.9.9.448.2.2.2 | GroupssmProvFeatureIfGroup | current | A collection of objects related to SSM Feature to Interface mapping . | |
| 1.3.6.1.4.1.9.9.448.2.2.3 | GroupssmProvDppGroup | current | A collection of objects related to DPP to interface mapping. |