CISCO-STACK-MIB
747 objects
This MIB provides configuration and runtime status for chassis, modules, ports, etc. on the Catalyst systems.
Imported Objects
| CISCO-SMI | workgroup |
| CISCO-VTP-MIB | VlanIndex |
| ENTITY-MIB | PhysicalIndex |
| FDDI-SMT73-MIB | fddimibPORTIndex fddimibPORTSMTIndex |
| IF-MIB | ifIndex ifName OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| TOKEN-RING-RMON-MIB | ringStationMacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.0 | NodeciscoStackNotificationsPrefix | |||
| 1.3.6.1.4.1.9.5.0.1 | NotificationlerAlarmOn | current | A lerAlarmOn trap signifies that the agent entity has detected that the fddimibPORTLerFlag object in the FDDI-SMT73-MIB (RFC 1512) has transitioned to the true… | |
| 1.3.6.1.4.1.9.5.0.2 | NotificationlerAlarmOff | current | A lerAlarmOff trap signifies that the agent entity has detected that the fddimibPORTLerFlag object in the FDDI-SMT73-MIB (RFC 1512) has transitioned to the fal… | |
| 1.3.6.1.4.1.9.5.0.3 | NotificationmoduleUp | current | A moduleUp trap signifies that the agent entity has detected that the moduleStatus object in this MIB has transitioned to the ok(2) state for one of its module… | |
| 1.3.6.1.4.1.9.5.0.4 | NotificationmoduleDown | current | A moduleDown trap signifies that the agent entity has detected that the moduleStatus object in this MIB has transitioned out of the ok(2) state for one of its … | |
| 1.3.6.1.4.1.9.5.0.5 | NotificationchassisAlarmOn | current | A chassisAlarmOn trap signifies that the agent entity has detected the chassisTempAlarm, chassisMinorAlarm, or chassisMajorAlarm object in this MIB has transit… | |
| 1.3.6.1.4.1.9.5.0.6 | NotificationchassisAlarmOff | current | A chassisAlarmOff trap signifies that the agent entity has detected the chassisTempAlarm, chassisMinorAlarm, or chassisMajorAlarm object in this MIB has transi… | |
| 1.3.6.1.4.1.9.5.0.7 | NotificationipPermitDeniedTrap | current | ipPermitDeniedTrap indicates that IP permit denied access happens. The generation of this trap can be controlled by the sysEnableIpPermitTraps object in this M… | |
| 1.3.6.1.4.1.9.5.0.9 | NotificationsysConfigChangeTrap | current | A sysConfigChange trap signifies that the system configuration in NVRAM is changed. The generation of this trap can be controlled by the sysEnableConfigTraps o… | |
| 1.3.6.1.4.1.9.5.0.10 | NotificationtokenRingSoftErrExceededTrap | current | This trap is generated when a station local to a token ring port exceeds its Soft Error Threshold within the configured interval. | |
| 1.3.6.1.4.1.9.5.1 | IdentityciscoStackMIB | This MIB provides configuration and runtime status for chassis, modules, ports, etc. on the Catalyst systems. | ||
| 1.3.6.1.4.1.9.5.1.1 | NodesystemGrp | |||
| 1.3.6.1.4.1.9.5.1.1.1 | ScalarsysMgmtType | read-only | current | Type of network management running on this entity. |
| 1.3.6.1.4.1.9.5.1.1.2 | ScalarsysIpAddr | read-write | deprecated | This entity's IP address. This object is deprecated and replaced by ciiIPAddressType and ciiIPAddress in CISCO-IP-IF-MIB. |
| 1.3.6.1.4.1.9.5.1.1.3 | ScalarsysNetMask | read-write | deprecated | This entity's subnet mask. This object is deprecated and replaced by ciiIPAddressPrefixLength in CISCO-IP-IF-MIB. |
| 1.3.6.1.4.1.9.5.1.1.4 | ScalarsysBroadcast | read-write | deprecated | This entity's broadcast address. This object is deprecated and replaced by ciiIPAddressBroadcast in CISCO-IP-IF-MIB. |
| 1.3.6.1.4.1.9.5.1.1.5 | TablesysTrapReceiverTable | not-accessible | deprecated | The trap receiver table (0 to 20 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this entity whe… |
| 1.3.6.1.4.1.9.5.1.1.5.1 | RowsysTrapReceiverEntry | not-accessible | deprecated | A trap receiver table entry. |
| 1.3.6.1.4.1.9.5.1.1.5.1.1 | ColumnsysTrapReceiverType | read-write | deprecated | Setting this object to invalid(2) removes the corresponding entry from the sysTrapReceiverTable. To add a new entry to the sysTrapReceiverTable, set this objec… |
| 1.3.6.1.4.1.9.5.1.1.5.1.2 | ColumnsysTrapReceiverAddr | read-only | deprecated | IP address for trap receiver. |
| 1.3.6.1.4.1.9.5.1.1.5.1.3 | ColumnsysTrapReceiverComm | read-write | deprecated | Community string used for trap messages to this trap receiver. |
| 1.3.6.1.4.1.9.5.1.1.6 | TablesysCommunityTable | not-accessible | deprecated | The community table (4 entries). This table lists community strings and their access levels. When an SNMP message is received by this entity, the community str… |
| 1.3.6.1.4.1.9.5.1.1.6.1 | RowsysCommunityEntry | not-accessible | deprecated | A community table entry. |
| 1.3.6.1.4.1.9.5.1.1.6.1.1 | ColumnsysCommunityAccess | read-only | deprecated | A value of readWriteAll(4) allows the community to read and write all objects in the MIB. A value of readWrite(3) allows the community to read and write all ob… |
| 1.3.6.1.4.1.9.5.1.1.6.1.2 | ColumnsysCommunityString | read-write | deprecated | Configurable community string with access rights defined by the value of sysCommunityAccess. |
| 1.3.6.1.4.1.9.5.1.1.7 | ScalarsysAttachType | read-write | current | The requested concentrator attachment type. For a dual attachment concentrator which can be connected to the trunk ring, the first FDDI port is configured as A… |
| 1.3.6.1.4.1.9.5.1.1.8 | ScalarsysTraffic | read-only | current | Traffic meter value, i.e. the percentage of bandwidth utilization for the previous polling interval. |
| 1.3.6.1.4.1.9.5.1.1.9 | ScalarsysReset | read-write | deprecated | Writing reset(2) to this object resets the control logic of all modules in the system. Writing resetMinDown(3) to this object resets the system with the minima… |
| 1.3.6.1.4.1.9.5.1.1.10 | ScalarsysBaudRate | read-write | current | The baud rate in bits per second of the RS-232 port. |
| 1.3.6.1.4.1.9.5.1.1.11 | ScalarsysInsertMode | read-write | current | The mode for inserting M-ports into the concentrator ring. |
| 1.3.6.1.4.1.9.5.1.1.12 | ScalarsysClearMacTime | read-write | deprecated | The time (in hundredths of a second) since mac counters were last cleared. Writing a 0 to this object causes the mac counters to be cleared. |
| 1.3.6.1.4.1.9.5.1.1.13 | ScalarsysClearPortTime | read-write | deprecated | The time (in hundredths of a second) since port counters were last cleared. Writing a 0 to this object causes the port counters to be cleared. |
| 1.3.6.1.4.1.9.5.1.1.14 | TablesysFddiRingTable | not-accessible | current | The fddi ring map table. This table lists the nodes in the FDDI ring(s) to which the system belongs. |
| 1.3.6.1.4.1.9.5.1.1.14.1 | RowsysFddiRingEntry | not-accessible | current | A FDDI Ring table entry. |
| 1.3.6.1.4.1.9.5.1.1.14.1.1 | ColumnsysFddiRingSMTIndex | read-only | current | The value of the SMT index associated with this ring. |
| 1.3.6.1.4.1.9.5.1.1.14.1.2 | ColumnsysFddiRingAddress | read-only | current | The MAC address of this node in the FDDI ring. |
| 1.3.6.1.4.1.9.5.1.1.14.1.3 | ColumnsysFddiRingNext | read-only | current | The MAC address of the next node in the FDDI ring. |
| 1.3.6.1.4.1.9.5.1.1.15 | ScalarsysEnableModem | read-write | current | Indicates whether the RS-232 port modem control lines are enabled. |
| 1.3.6.1.4.1.9.5.1.1.16 | ScalarsysEnableRedirects | read-write | current | Indicates whether ICMP redirect messages are sent or received by the system. |
| 1.3.6.1.4.1.9.5.1.1.17 | ScalarsysEnableRmon | read-write | current | Indicates whether the SNMP agent supports the RMON MIB. |
| 1.3.6.1.4.1.9.5.1.1.18 | ScalarsysArpAgingTime | read-write | current | The aging time for the ARP table. |
| 1.3.6.1.4.1.9.5.1.1.19 | ScalarsysTrafficPeak | read-only | current | Peak traffic meter value since the last time port counters were cleared or the system started (see sysClearPortTime). |
| 1.3.6.1.4.1.9.5.1.1.20 | ScalarsysTrafficPeakTime | read-only | current | The time (in hundredths of a second) since the peak traffic meter value occurred. |
| 1.3.6.1.4.1.9.5.1.1.21 | ScalarsysCommunityRwa | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it matches, read-write access is gr… |
| 1.3.6.1.4.1.9.5.1.1.22 | ScalarsysCommunityRw | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it matches, read-write access is g… |
| 1.3.6.1.4.1.9.5.1.1.23 | ScalarsysCommunityRo | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-only access is gra… |
| 1.3.6.1.4.1.9.5.1.1.24 | ScalarsysEnableChassisTraps | read-write | current | Indicates whether chassisAlarmOn and chassisAlarmOff traps in this MIB should be generated. |
| 1.3.6.1.4.1.9.5.1.1.25 | ScalarsysEnableModuleTraps | read-write | current | Indicates whether moduleUp and moduleDown traps in this MIB should be generated. |
| 1.3.6.1.4.1.9.5.1.1.26 | ScalarsysEnableBridgeTraps | read-write | deprecated | Indicates whether newRoot and topologyChange traps in the BRIDGE-MIB (RFC 1493) should be generated. enabled traps are enabled. disabled topologyChange traps a… |
| 1.3.6.1.4.1.9.5.1.1.27 | ScalarsysIpVlan | read-write | current | This entity's IP address Virtual LAN association. |
| 1.3.6.1.4.1.9.5.1.1.28 | ScalarsysConfigChangeTime | read-only | current | The time (in hundredths of a second) since the configuration of the system was last changed. |
| 1.3.6.1.4.1.9.5.1.1.29 | ScalarsysEnableRepeaterTraps | read-write | current | Indicates whether the traps in the REPEATER-MIB (RFC1516) should be generated. |
| 1.3.6.1.4.1.9.5.1.1.30 | ScalarsysBannerMotd | read-write | current | Message of the day banner which is displayed on the Command Line Interface before log in. |
| 1.3.6.1.4.1.9.5.1.1.31 | ScalarsysEnableIpPermitTraps | read-write | current | Indicates whether the IP permit traps in this MIB should be generated. |
| 1.3.6.1.4.1.9.5.1.1.32 | TablesysTrafficMeterTable | not-accessible | current | The system traffic meter table. This table lists the traffic meters available in the system. |
| 1.3.6.1.4.1.9.5.1.1.32.1 | RowsysTrafficMeterEntry | not-accessible | current | A traffic meter table entry. |
| 1.3.6.1.4.1.9.5.1.1.32.1.1 | ColumnsysTrafficMeterType | read-only | current | The type of traffic meter. |
| 1.3.6.1.4.1.9.5.1.1.32.1.2 | ColumnsysTrafficMeter | read-only | current | Traffic meter value, i.e. the percentage of bandwidth utilization for the previous polling interval. |
| 1.3.6.1.4.1.9.5.1.1.32.1.3 | ColumnsysTrafficMeterPeak | read-only | current | Peak traffic meter value since the system started. |
| 1.3.6.1.4.1.9.5.1.1.32.1.4 | ColumnsysTrafficMeterPeakTime | read-only | current | The time (in hundredths of a second) since the peak traffic meter value occurred. |
| 1.3.6.1.4.1.9.5.1.1.33 | ScalarsysEnableVmpsTraps | read-write | current | Indicates whether the vmVmpsChange trap defined in CISCO-VLAN-MEMBERSHIP-MIB should be generated. |
| 1.3.6.1.4.1.9.5.1.1.34 | ScalarsysConfigChangeInfo | read-only | current | Indicates which NVRAM block is changed by whom. |
| 1.3.6.1.4.1.9.5.1.1.35 | ScalarsysEnableConfigTraps | read-write | current | Indicates whether sysConfigChange trap in this MIB should be generated. |
| 1.3.6.1.4.1.9.5.1.1.36 | ScalarsysConfigRegister | read-write | current | The value of configuration register that will be used by the supervisor module when the system is restarted. This MIB object is only supported in systems with … |
| 1.3.6.1.4.1.9.5.1.1.37 | ScalarsysBootVariable | read-write | current | A list of the system boot images in the BOOT environment variable on supervisor modules with ROMMON. The format of sysBootVariable should be: <device>:[<fileNa… |
| 1.3.6.1.4.1.9.5.1.1.38 | ScalarsysBootedImage | read-only | current | The name of the system boot image which the system booted from. This MIB object is only supported in the system with Supervisor module 3 present. |
| 1.3.6.1.4.1.9.5.1.1.39 | ScalarsysEnableEntityTrap | read-write | current | Indicates whether entConfigChange trap in the ENTITY-MIB should be generated. |
| 1.3.6.1.4.1.9.5.1.1.40 | ScalarsysEnableStpxTrap | read-write | deprecated | Indicates whether stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate notifications in CISCO-STP-EXTENSIONS-MIB should be gene… |
| 1.3.6.1.4.1.9.5.1.1.41 | ScalarsysExtendedRmonVlanModeEnable | read-write | current | Indicates whether the Extended RMON VlanMode feature is enabled or not. If it is set to enabled(1), hostTable (rmon 4) will provide the information of a list o… |
| 1.3.6.1.4.1.9.5.1.1.42 | ScalarsysExtendedRmonNetflowPassword | read-write | current | The password for enabling the Extended RMON Netflow feature and this object has to be set before setting sysExtendedRmonNetflowEnable to enabled(1). When readi… |
| 1.3.6.1.4.1.9.5.1.1.43 | ScalarsysExtendedRmonNetflowEnable | read-write | current | Indicates whether the Extended RMON Netflow feature is enabled or not. Setting this object to disabled(2), will clear sysExtendedRmonNetflowPassword automatica… |
| 1.3.6.1.4.1.9.5.1.1.44 | ScalarsysExtendedRmonVlanAgentEnable | read-write | current | Indicates whether the Extended RMON VlanAgent feature is enabled or not. If it is set to enabled(1), the extended RMON will also provide the information on VLA… |
| 1.3.6.1.4.1.9.5.1.1.45 | ScalarsysExtendedRmonEnable | read-write | current | Indicates whether the SNMP agent supports the extended RMON feature. noNAMPresent(3) is a read-only value and the agent will return this value when the sysEnab… |
| 1.3.6.1.4.1.9.5.1.1.46 | ScalarsysConsolePrimaryLoginAuthentication | read-write | deprecated | Indicates whether TACACS+ or RADIUS is the primary login authentication, i.e which method will be tried first for a console session. If tacacsLoginAuthenticati… |
| 1.3.6.1.4.1.9.5.1.1.47 | ScalarsysConsolePrimaryEnableAuthentication | read-write | deprecated | Indicates whether TACACS+ or RADIUS is the primary enable authentication, i.e which method will be tried first for a console session. If tacacsEnableAuthentica… |
| 1.3.6.1.4.1.9.5.1.1.48 | ScalarsysTelnetPrimaryLoginAuthentication | read-write | deprecated | Indicates whether TACACS+ or RADIUS is the primary login authentication, i.e which method will be tried first for a telnet session. If tacacsLoginAuthenticatio… |
| 1.3.6.1.4.1.9.5.1.1.49 | ScalarsysTelnetPrimaryEnableAuthentication | read-write | deprecated | Indicates whether TACACS+ or RADIUS is the primary enable authentication, i.e which method will be tried first for a telnet session. If tacacsEnableAuthenticat… |
| 1.3.6.1.4.1.9.5.1.1.50 | ScalarsysStartupConfigSource | read-write | current | Indicates whether the configuration file(s) specified in sysStartupConfigSourceFile will be used recurringly or not whenever the system resets. Setting this ob… |
| 1.3.6.1.4.1.9.5.1.1.51 | ScalarsysStartupConfigSourceFile | read-write | current | Indicates which configuration file(s) on the flash device will be used during the next system startup. If the value of this MIB object contains one or multiple… |
| 1.3.6.1.4.1.9.5.1.1.52 | ScalarsysConfigSupervisorModuleNo | read-write | current | Indicates the supervisor module (active or standby, if applicable) that the MIB objects sysConfigRegister, sysBootVariable, sysStartupConfigSource, and sysStar… |
| 1.3.6.1.4.1.9.5.1.1.53 | ScalarsysStandbyPortEnable | read-write | current | Indicates whether the standby port feature is enabled or not. If this object is set to enabled(1), the uplink ports on the standby supervisor module are activa… |
| 1.3.6.1.4.1.9.5.1.1.54 | ScalarsysPortFastBpduGuard | read-write | deprecated | Indicates whether BPDU Guard for Spanning Tree Port Fast Start feature is enabled or not. If the value of this object is set to enabled(1), then when the switc… |
| 1.3.6.1.4.1.9.5.1.1.55 | ScalarsysErrDisableTimeoutEnable | read-write | current | Indicates whether errdisable timeout feature is enabled for each of the causes or not. The other(0) is for all causes other than: udld(1), duplexMismatch(2), b… |
| 1.3.6.1.4.1.9.5.1.1.56 | ScalarsysErrDisableTimeoutInterval | read-write | current | Indicates the timeout interval in seconds for errdisable timeout feature. |
| 1.3.6.1.4.1.9.5.1.1.57 | ScalarsysTrafficMonitorHighWaterMark | read-write | current | Indicates the high watermark for the switching bus traffic in percentage. Syslog messages will be generated if the switching bus traffic goes over this object … |
| 1.3.6.1.4.1.9.5.1.1.58 | ScalarsysHighAvailabilityEnable | read-write | current | Indicates whether High System Availability feature is enabled or not. If this feature is enabled, the active supervisor's layer-2 protocol state will be synche… |
| 1.3.6.1.4.1.9.5.1.1.59 | ScalarsysHighAvailabilityVersioningEnable | read-write | current | Indicates whether support for supervisor software image versioning (i.e., the capability to run different images on the active and standby supervisors) for the… |
| 1.3.6.1.4.1.9.5.1.1.60 | ScalarsysHighAvailabilityOperStatus | read-only | current | Indicates the operational status of High System Availability feature. If the value of this object is notRunning(2), then the reason why this feature is actuall… |
| 1.3.6.1.4.1.9.5.1.1.61 | ScalarsysHighAvailabilityNotRunningReason | read-only | current | Indicates the reason why High System Availability feature is not running when the value of sysHighAvailabilityOperStatus is notRunning(2). The value of this ob… |
| 1.3.6.1.4.1.9.5.1.1.62 | ScalarsysExtendedRmonNetflowModuleMask | read-write | current | Indicates Netflow Export Data (NDE) to be sent to which Network Analysis Modules (NAM) in the same chassis. If users set a bit from off to on, the system will … |
| 1.3.6.1.4.1.9.5.1.1.63 | ScalarsshPublicKeySize | read-write | current | Indicates public key size in bits. In write, if a key does not exist, a value between 512 and 2048 will generate a RSA public key with the value as its key siz… |
| 1.3.6.1.4.1.9.5.1.1.64 | ScalarsysMaxRmonMemory | read-write | current | Indicates the maximum percentage of the memory usage for RMON. |
| 1.3.6.1.4.1.9.5.1.1.65 | ScalarsysMacReductionAdminEnable | read-write | current | Indicates whether Mac Reduction feature (to reduce the number of MAC addresses used in bridge identifier) is administratively enabled on the device or not. |
| 1.3.6.1.4.1.9.5.1.1.66 | ScalarsysMacReductionOperEnable | read-only | current | Indicates whether Mac Reduction feature (to reduce the number of MAC addresses used in bridge identifier) is operationaly enabled on the device or not. If the … |
| 1.3.6.1.4.1.9.5.1.1.67 | ScalarsysStatus | read-only | current | The operational status of the system. |
| 1.3.6.1.4.1.9.5.1.2 | NodechassisGrp | |||
| 1.3.6.1.4.1.9.5.1.2.1 | ScalarchassisSysType | read-only | current | The chassis system type. |
| 1.3.6.1.4.1.9.5.1.2.2 | ScalarchassisBkplType | read-only | current | The chassis backplane type. |
| 1.3.6.1.4.1.9.5.1.2.3 | ScalarchassisPs1Type | read-only | current | Type of power supply number 1. |
| 1.3.6.1.4.1.9.5.1.2.4 | ScalarchassisPs1Status | read-only | current | Status of power supply number 1. If the status is not ok, the value of chassisPs1TestResult gives more detailed information about the power supply's failure co… |
| 1.3.6.1.4.1.9.5.1.2.5 | ScalarchassisPs1TestResult | read-only | current | Test result for power supply number 1. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.9.5.1.2.6 | ScalarchassisPs2Type | read-only | current | Type of power supply number 2. |
| 1.3.6.1.4.1.9.5.1.2.7 | ScalarchassisPs2Status | read-only | current | Status of power supply number 2. If the status is not ok, the value of chassisPs2TestResult gives more detailed information about the power supply's failure co… |
| 1.3.6.1.4.1.9.5.1.2.8 | ScalarchassisPs2TestResult | read-only | current | Test result for power supply number 2. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.9.5.1.2.9 | ScalarchassisFanStatus | read-only | current | Status of the chassis fan. If the status is not ok, the value of chassisFanTestResult gives more detailed information about the fan's failure condition(s). |
| 1.3.6.1.4.1.9.5.1.2.10 | ScalarchassisFanTestResult | read-only | current | Test result for the chassis fan. A zero indicates that the fan passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.9.5.1.2.11 | ScalarchassisMinorAlarm | read-only | current | The chassis minor alarm status. |
| 1.3.6.1.4.1.9.5.1.2.12 | ScalarchassisMajorAlarm | read-only | current | The chassis major alarm status. |
| 1.3.6.1.4.1.9.5.1.2.13 | ScalarchassisTempAlarm | read-only | current | The chassis temperature alarm status. |
| 1.3.6.1.4.1.9.5.1.2.14 | ScalarchassisNumSlots | read-only | current | The number of slots in the chassis available for plug-in modules. |
| 1.3.6.1.4.1.9.5.1.2.15 | ScalarchassisSlotConfig | read-only | current | An indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted… |
| 1.3.6.1.4.1.9.5.1.2.16 | ScalarchassisModel | read-only | current | The manufacturer's model number for the chassis. |
| 1.3.6.1.4.1.9.5.1.2.17 | ScalarchassisSerialNumber | read-only | deprecated | The serial number of the chassis in a numeric format. If the chassis uses an alphanumeric serial number, this MIB object will return 0. This object is deprecat… |
| 1.3.6.1.4.1.9.5.1.2.18 | TablechassisComponentTable | not-accessible | deprecated | A list of the chassis related components in the chassis. This table is deprecated and replaced by entPhysicalTable in ENTITY-MIB. |
| 1.3.6.1.4.1.9.5.1.2.18.1 | RowchassisComponentEntry | not-accessible | deprecated | Entry containing information about one component in the chassis. |
| 1.3.6.1.4.1.9.5.1.2.18.1.1 | ColumnchassisComponentIndex | read-only | deprecated | A unique value for each chassis related component within the chassis. |
| 1.3.6.1.4.1.9.5.1.2.18.1.2 | ColumnchassisComponentType | read-only | deprecated | The type of the chassis component. |
| 1.3.6.1.4.1.9.5.1.2.18.1.3 | ColumnchassisComponentSerialNumber | read-only | deprecated | The serial number of the chassis component. |
| 1.3.6.1.4.1.9.5.1.2.18.1.4 | ColumnchassisComponentHwVersion | read-only | deprecated | The hardware version of the chassis component. |
| 1.3.6.1.4.1.9.5.1.2.18.1.5 | ColumnchassisComponentModel | read-only | deprecated | The manufacturer's model number for the chassis component. |
| 1.3.6.1.4.1.9.5.1.2.19 | ScalarchassisSerialNumberString | read-only | current | The serial number of the chassis. This MIB object will return the chassis serial number for any chassis that either a numeric or an alphanumeric serial number … |
| 1.3.6.1.4.1.9.5.1.2.20 | ScalarchassisPs3Type | read-only | current | Type of power supply number 3. This object is only supported by systems that can have 3 or more power supplies. |
| 1.3.6.1.4.1.9.5.1.2.21 | ScalarchassisPs3Status | read-only | current | Status of power supply number 3. If the status is not ok, the value of chassisPs3TestResult gives more detailed information about the power supply's failure co… |
| 1.3.6.1.4.1.9.5.1.2.22 | ScalarchassisPs3TestResult | read-only | current | Test result for power supply number 3. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions. This object is only… |
| 1.3.6.1.4.1.9.5.1.2.23 | ScalarchassisPEMInstalled | read-only | current | Indicates whether Power Entry Module is installed into the Chassis or not. Power Entry Module is a connection into the system for an external power supply of -… |
| 1.3.6.1.4.1.9.5.1.3 | NodemoduleGrp | |||
| 1.3.6.1.4.1.9.5.1.3.1 | TablemoduleTable | not-accessible | current | A list of module entries. The number of entries is the number of modules in the chassis. |
| 1.3.6.1.4.1.9.5.1.3.1.1 | RowmoduleEntry | not-accessible | current | Entry containing information about one module in the chassis. |
| 1.3.6.1.4.1.9.5.1.3.1.1.1 | ColumnmoduleIndex | read-only | current | A unique value for each module within the chassis. |
| 1.3.6.1.4.1.9.5.1.3.1.1.2 | ColumnmoduleType | read-only | current | The type of module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.3 | ColumnmoduleSerialNumber | read-only | deprecated | The serial number of the module in a numeric format. If the module uses an alphanumeric serial number, this MIB object will return 0. This object is deprecated… |
| 1.3.6.1.4.1.9.5.1.3.1.1.4 | ColumnmoduleHwHiVersion | read-only | deprecated | The high part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwHiVersion is 3. This object is deprecate… |
| 1.3.6.1.4.1.9.5.1.3.1.1.5 | ColumnmoduleHwLoVersion | read-only | deprecated | The low part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwLoVersion is 1. This object is deprecated… |
| 1.3.6.1.4.1.9.5.1.3.1.1.6 | ColumnmoduleFwHiVersion | read-only | deprecated | The high part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwHiVersion is 3. This object is deprecated and r… |
| 1.3.6.1.4.1.9.5.1.3.1.1.7 | ColumnmoduleFwLoVersion | read-only | deprecated | The low part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwLoVersion is 1. This object is deprecated and re… |
| 1.3.6.1.4.1.9.5.1.3.1.1.8 | ColumnmoduleSwHiVersion | read-only | deprecated | The high part of the software version number. For example, if the software version is 3.1, the value of moduleSwHiVersion is 3. This object is deprecated and r… |
| 1.3.6.1.4.1.9.5.1.3.1.1.9 | ColumnmoduleSwLoVersion | read-only | deprecated | The low part of the software version number. For example, if the software version is 3.1, the value of moduleSwLoVersion is 1. This object is deprecated and re… |
| 1.3.6.1.4.1.9.5.1.3.1.1.10 | ColumnmoduleStatus | read-only | current | The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure conditi… |
| 1.3.6.1.4.1.9.5.1.3.1.1.11 | ColumnmoduleTestResult | read-only | current | The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.9.5.1.3.1.1.12 | ColumnmoduleAction | read-write | current | This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module curre… |
| 1.3.6.1.4.1.9.5.1.3.1.1.13 | ColumnmoduleName | read-write | current | A descriptive string used by the network administrator to name the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.14 | ColumnmoduleNumPorts | read-only | current | The number of ports supported by the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.15 | ColumnmodulePortStatus | read-only | current | A series of bytes containing status information about the module and each of the ports on the module. The first byte contains the status for the module (same v… |
| 1.3.6.1.4.1.9.5.1.3.1.1.16 | ColumnmoduleSubType | read-only | current | The type of daughterboard attached to this module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.17 | ColumnmoduleModel | read-only | current | The manufacturer's model number for the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.18 | ColumnmoduleHwVersion | read-only | current | The hardware version of the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.19 | ColumnmoduleFwVersion | read-only | current | The firmware version of the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.20 | ColumnmoduleSwVersion | read-only | current | The software version of the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.21 | ColumnmoduleStandbyStatus | read-only | current | Redundant status of a module that supports redundancy. |
| 1.3.6.1.4.1.9.5.1.3.1.1.22 | ColumnmoduleIPAddress | read-only | current | If the module has a separate IP address to reach it by, then it is reported here. Otherwise, this object has a value of '00000000H'. |
| 1.3.6.1.4.1.9.5.1.3.1.1.23 | ColumnmoduleIPAddressVlan | read-only | current | If the moduleIPAddress is valid then this object reports the VLAN to access that IP address on. Otherwise this object has a value of zero. |
| 1.3.6.1.4.1.9.5.1.3.1.1.24 | ColumnmoduleSubType2 | read-only | current | The type of daughterboard attached to this module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.25 | ColumnmoduleSlotNum | read-only | current | This value is determined by the chassis slot number where the module is located. Valid entries are 1 to the value of chassisNumSlots |
| 1.3.6.1.4.1.9.5.1.3.1.1.26 | ColumnmoduleSerialNumberString | read-only | current | The serial number of the module. This MIB object will return the module serial number for any module that either a numeric or an alphanumeric serial number is … |
| 1.3.6.1.4.1.9.5.1.3.1.1.27 | ColumnmoduleEntPhysicalIndex | read-only | current | The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.28 | ColumnmoduleAdditionalStatus | read-only | current | The additional status of the module. fruInstalled(0) indicates that whether or not FRU is installed on the module. powerDenied(1) indicates that whether phones… |
| 1.3.6.1.4.1.9.5.1.4 | NodeportGrp | |||
| 1.3.6.1.4.1.9.5.1.4.1 | TableportTable | not-accessible | current | A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module. |
| 1.3.6.1.4.1.9.5.1.4.1.1 | RowportEntry | not-accessible | current | Entry containing information for a particular port on a module. |
| 1.3.6.1.4.1.9.5.1.4.1.1.1 | ColumnportModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located. |
| 1.3.6.1.4.1.9.5.1.4.1.1.2 | ColumnportIndex | read-only | current | An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to th… |
| 1.3.6.1.4.1.9.5.1.4.1.1.3 | ColumnportCrossIndex | read-only | current | A cross-reference to the port's index within another mib group. The value is dependent on the type of port. For an FDDI port, this corresponds to the snmpFddiP… |
| 1.3.6.1.4.1.9.5.1.4.1.1.4 | ColumnportName | read-write | current | A descriptive string used by the network administrator to name the port. |
| 1.3.6.1.4.1.9.5.1.4.1.1.5 | ColumnportType | read-only | current | The type of physical layer medium dependent interface on the port. |
| 1.3.6.1.4.1.9.5.1.4.1.1.6 | ColumnportOperStatus | read-only | current | The current operational status of the port. |
| 1.3.6.1.4.1.9.5.1.4.1.1.7 | ColumnportCrossGroupIndex | read-only | current | A cross-reference to another mib group for this port. The value is dependent on the type of port. For an FDDI port this corresponds to the snmpFddiPORTSMTIndex. |
| 1.3.6.1.4.1.9.5.1.4.1.1.8 | ColumnportAdditionalStatus | read-only | current | Additional status information for the port. The value is a sum. It initially takes the value zero, then for each state that is true, 2 raised to a power is add… |
| 1.3.6.1.4.1.9.5.1.4.1.1.9 | ColumnportAdminSpeed | read-write | current | The desired speed of the port. The current operational speed of the port can be determined from ifSpeed. |
| 1.3.6.1.4.1.9.5.1.4.1.1.10 | ColumnportDuplex | read-write | current | Indicates whether the port is operating in half- duplex, full-duplex, disagree or auto negotiation mode. If the port could not agree with the far end on port d… |
| 1.3.6.1.4.1.9.5.1.4.1.1.11 | ColumnportIfIndex | read-only | current | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. |
| 1.3.6.1.4.1.9.5.1.4.1.1.12 | ColumnportSpantreeFastStart | read-write | deprecated | Indicates whether the port is operating in spantree fast start mode. A port with fast start enabled is immediately put in spanning tree forwarding state on lin… |
| 1.3.6.1.4.1.9.5.1.4.1.1.13 | ColumnportAdminRxFlowControl | read-write | current | Indicates the receive flow control administrative status set on the port. If the status is set to on(1), the port will require the far end to send flow control… |
| 1.3.6.1.4.1.9.5.1.4.1.1.14 | ColumnportOperRxFlowControl | read-only | current | Indicates the receive flow control operational status of the port. If the port could not agree with the far end on a link protocol, its operational status will… |
| 1.3.6.1.4.1.9.5.1.4.1.1.15 | ColumnportAdminTxFlowControl | read-write | current | Indicates the transmit flow control administrative status set on the port. If the status is set to on(1), the port will send flow control to the far end. If th… |
| 1.3.6.1.4.1.9.5.1.4.1.1.16 | ColumnportOperTxFlowControl | read-only | current | Indicates the transmit flow control operational status of the port. If the port could not agree with the far end on a link protocol, its operational status wil… |
| 1.3.6.1.4.1.9.5.1.4.1.1.17 | ColumnportMacControlTransmitFrames | read-only | current | The total number of MAC control frames passed to the MAC sublayer for transmission. |
| 1.3.6.1.4.1.9.5.1.4.1.1.18 | ColumnportMacControlReceiveFrames | read-only | current | The total number of MAC control frames passed by the MAC sublayer to the MAC Control sublayer on receive. |
| 1.3.6.1.4.1.9.5.1.4.1.1.19 | ColumnportMacControlPauseTransmitFrames | read-only | current | The total number of PAUSE frames passed to the MAC sublayer for transmission. |
| 1.3.6.1.4.1.9.5.1.4.1.1.20 | ColumnportMacControlPauseReceiveFrames | read-only | current | The total number of PAUSE frames passed by the MAC sublayer to the MAC Control sublayer on receive. |
| 1.3.6.1.4.1.9.5.1.4.1.1.21 | ColumnportMacControlUnknownProtocolFrames | read-only | current | The total number of MAC Control frames received with an opcode that is not supported by the device. |
| 1.3.6.1.4.1.9.5.1.4.1.1.22 | ColumnportLinkFaultStatus | read-only | current | Specifies additional link fault status on a gigabit link. noFault: Link is up and operational. nearEndFault: The port is enabled but there is no GBIC present o… |
| 1.3.6.1.4.1.9.5.1.4.1.1.23 | ColumnportAdditionalOperStatus | read-only | current | The current operational status of the port which is showing additional detailed information of the port. |
| 1.3.6.1.4.1.9.5.1.4.1.1.24 | ColumnportInlinePowerDetect | read-only | current | Indicate if the port detects an inline power capable device connected to it. |
| 1.3.6.1.4.1.9.5.1.4.1.1.25 | ColumnportEntPhysicalIndex | read-only | current | The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this port. |
| 1.3.6.1.4.1.9.5.1.4.1.1.26 | ColumnportErrDisableTimeOutEnable | read-write | current | Indicates whether a port that is put into errdisable state by a cause as specified by sysErrDisableTimeoutEnable will be re-enabled automatically during the ti… |
| 1.3.6.1.4.1.9.5.1.5 | NodetftpGrp | |||
| 1.3.6.1.4.1.9.5.1.5.1 | ScalartftpHost | read-write | current | Name of source/destination host for the TFTP transfer or storage device transfer. If the name is for the TFTP transfer, it can be the IP address or the host na… |
| 1.3.6.1.4.1.9.5.1.5.2 | ScalartftpFile | read-write | current | Name of file for the TFTP transfer or for storage device transfer. |
| 1.3.6.1.4.1.9.5.1.5.3 | ScalartftpModule | read-write | current | Which module's code/configuration is being transferred. |
| 1.3.6.1.4.1.9.5.1.5.4 | ScalartftpAction | read-write | current | Setting this object to one of the acceptable values initiates the requested action using the information given in tftpHost, tftpFile, tftpModule. downloadConfi… |
| 1.3.6.1.4.1.9.5.1.5.5 | ScalartftpResult | read-only | current | Contains result of the last tftp action request. |
| 1.3.6.1.4.1.9.5.1.6 | NodebrouterGrp | |||
| 1.3.6.1.4.1.9.5.1.6.1 | ScalarbrouterEnableRip | read-write | current | Indicates whether the RIP protocol is enabled. |
| 1.3.6.1.4.1.9.5.1.6.2 | ScalarbrouterEnableSpantree | read-write | current | Indicates if Spanning Tree protocol is enabled. |
| 1.3.6.1.4.1.9.5.1.6.3 | ScalarbrouterEnableGiantCheck | read-write | current | Indicates whether special handling of giant packets is enabled. |
| 1.3.6.1.4.1.9.5.1.6.4 | ScalarbrouterEnableIpFragmentation | read-write | current | Indicates whether IP fragmentation is enabled. |
| 1.3.6.1.4.1.9.5.1.6.5 | ScalarbrouterEnableUnreachables | read-write | current | Indicates whether ICMP unreachable messages are sent by the system. |
| 1.3.6.1.4.1.9.5.1.6.6 | ScalarbrouterCamAgingTime | read-write | deprecated | The aging time for the CAM table. This duplicate item is the same value as dot1dTpAgingTime. |
| 1.3.6.1.4.1.9.5.1.6.7 | ScalarbrouterCamMode | read-write | current | Mode in which the CAM module is operating. |
| 1.3.6.1.4.1.9.5.1.6.8 | ScalarbrouterIpxSnapToEther | read-write | current | The default translation for IPX packets when bridging from FDDI SNAP to Ethernet. |
| 1.3.6.1.4.1.9.5.1.6.9 | ScalarbrouterIpx8023RawToFddi | read-write | current | The default translation for IPX packets when bridging from Ethernet 802.3 Raw to FDDI. |
| 1.3.6.1.4.1.9.5.1.6.10 | ScalarbrouterEthernetReceiveMax | read-write | current | Maximum number of Ethernet receive buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.11 | ScalarbrouterEthernetTransmitMax | read-write | current | Maximum number of Ethernet transmit buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.12 | ScalarbrouterFddiReceiveMax | read-write | current | Maximum number of FDDI receive buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.13 | ScalarbrouterFddiTransmitMax | read-write | current | Maximum number of FDDI transmit buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.14 | TablebrouterPortTable | not-accessible | current | A list of brouter port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module. |
| 1.3.6.1.4.1.9.5.1.6.14.1 | RowbrouterPortEntry | not-accessible | current | Entry containing bridge/router information for a particular port on a module. |
| 1.3.6.1.4.1.9.5.1.6.14.1.1 | ColumnbrouterPortModule | read-only | current | An index value that uniquely identifies the module index where this port is located. |
| 1.3.6.1.4.1.9.5.1.6.14.1.2 | ColumnbrouterPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.6.14.1.3 | ColumnbrouterPortIpVlan | read-write | current | The IP Virtual LAN to which this port belongs. |
| 1.3.6.1.4.1.9.5.1.6.14.1.4 | ColumnbrouterPortIpAddr | read-write | current | This port's IP address. |
| 1.3.6.1.4.1.9.5.1.6.14.1.5 | ColumnbrouterPortNetMask | read-write | current | This port's subnet mask. |
| 1.3.6.1.4.1.9.5.1.6.14.1.6 | ColumnbrouterPortBroadcast | read-write | current | This port's broadcast address. |
| 1.3.6.1.4.1.9.5.1.6.14.1.7 | ColumnbrouterPortBridgeVlan | read-write | current | The bridge Virtual LAN to which this port belongs. |
| 1.3.6.1.4.1.9.5.1.6.14.1.8 | ColumnbrouterPortIpHelpers | read-write | current | An indication of which other Virtual LANs UDP/IP broadcasts received on this port will be forwarded to. The normal situation is broadcasts NOT forwarded beyond… |
| 1.3.6.1.4.1.9.5.1.6.15 | ScalarbrouterIpx8022ToEther | read-write | current | The default translation for IPX packets when bridging from FDDI 802.2 to Ethernet. |
| 1.3.6.1.4.1.9.5.1.6.16 | ScalarbrouterEnableTransitEncapsulation | read-write | current | Indicates whether Ethernet packets are encapsulated on FDDI via transit encapsulation protocol. Normally this option would be disabled to allow translational b… |
| 1.3.6.1.4.1.9.5.1.6.17 | ScalarbrouterEnableFddiCheck | read-write | current | Indicates whether MAC addresses learned one side of a translational bridge should not be allowed to be learned on the other side of the bridge. The presence ce… |
| 1.3.6.1.4.1.9.5.1.6.18 | ScalarbrouterEnableAPaRT | read-write | current | Indicates whether the Automatic Packet Recognition and Translation feature is enabled on translational bridge(s) in the box. If APaRT is disabled, the default … |
| 1.3.6.1.4.1.9.5.1.7 | NodefilterGrp | |||
| 1.3.6.1.4.1.9.5.1.7.1 | TablefilterMacTable | not-accessible | current | A list of filter mac entries. |
| 1.3.6.1.4.1.9.5.1.7.1.1 | RowfilterMacEntry | not-accessible | current | Entry containing MAC address filter information. |
| 1.3.6.1.4.1.9.5.1.7.1.1.1 | ColumnfilterMacModule | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.7.1.1.2 | ColumnfilterMacPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.7.1.1.3 | ColumnfilterMacAddress | read-only | current | A MAC address. If the source or destination MAC address equals this value, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. T… |
| 1.3.6.1.4.1.9.5.1.7.1.1.4 | ColumnfilterMacType | read-write | current | Setting this object to invalid(2) removes the corresponding entry from the filterMacTable. To add a new entry to the filterMacTable, set this object to deny(1)… |
| 1.3.6.1.4.1.9.5.1.7.2 | TablefilterVendorTable | not-accessible | current | A list of filter vendor ID entries. |
| 1.3.6.1.4.1.9.5.1.7.2.1 | RowfilterVendorEntry | not-accessible | current | Entry containing vendor ID filter information. |
| 1.3.6.1.4.1.9.5.1.7.2.1.1 | ColumnfilterVendorModule | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.7.2.1.2 | ColumnfilterVendorPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.7.2.1.3 | ColumnfilterVendorId | read-only | current | The vendor ID portion of a MAC address. If the source or destination MAC address has the same vendor ID, a match occurs. The packet is dropped if a match occur… |
| 1.3.6.1.4.1.9.5.1.7.2.1.4 | ColumnfilterVendorType | read-write | current | Setting this object to invalid(2) removes the corresponding entry from the filterVendorTable. To add a new entry to the filterVendorTable, set this object to d… |
| 1.3.6.1.4.1.9.5.1.7.3 | TablefilterProtocolTable | not-accessible | current | A list of filter protocol entries. |
| 1.3.6.1.4.1.9.5.1.7.3.1 | RowfilterProtocolEntry | not-accessible | current | Entry containing PROTOCOL address filter information. |
| 1.3.6.1.4.1.9.5.1.7.3.1.1 | ColumnfilterProtocolModule | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.7.3.1.2 | ColumnfilterProtocolPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.7.3.1.3 | ColumnfilterProtocolValue | read-only | current | A 16-bit protocol value. If the packet's type field or the packet's DSAP/SSAP field is equal to this value, a match occurs. The packet is dropped if a match oc… |
| 1.3.6.1.4.1.9.5.1.7.3.1.4 | ColumnfilterProtocolType | read-create | current | Setting this object to invalid(2) removes the corresponding entry from the filterProtocolTable. To add a new entry to the filterProtocolTable, set this object … |
| 1.3.6.1.4.1.9.5.1.7.4 | TablefilterTestTable | not-accessible | current | A list of filter test entries. |
| 1.3.6.1.4.1.9.5.1.7.4.1 | RowfilterTestEntry | not-accessible | current | Entry containing test filter information. |
| 1.3.6.1.4.1.9.5.1.7.4.1.1 | ColumnfilterTestModule | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.7.4.1.2 | ColumnfilterTestPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.7.4.1.3 | ColumnfilterTestIndex | read-only | current | An index value that uniquely identifies a test for a particular module/port. |
| 1.3.6.1.4.1.9.5.1.7.4.1.4 | ColumnfilterTestType | read-create | current | Setting this object to invalid(2) removes the corresponding entry from the filterTestTable. To add a new entry to the filterTestTable, set this object to valid… |
| 1.3.6.1.4.1.9.5.1.7.4.1.5 | ColumnfilterTestOffset | read-create | current | A byte offset into packet. Must be a 32-bit word aligned offset, i.e. 0, 4, 8, etc. |
| 1.3.6.1.4.1.9.5.1.7.4.1.6 | ColumnfilterTestValue | read-create | current | A 32-bit value to be compared against the packet location specified by filterTestOffset. |
| 1.3.6.1.4.1.9.5.1.7.4.1.7 | ColumnfilterTestMask | read-create | current | A 32-bit value to be bitwise ANDed with the packet location specified by filterTestOffset before being compared to filterTestValue. |
| 1.3.6.1.4.1.9.5.1.7.5 | TablefilterPortTable | not-accessible | current | A list of filter port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module. |
| 1.3.6.1.4.1.9.5.1.7.5.1 | RowfilterPortEntry | not-accessible | current | Entry containing filter information for a particular port on a module. |
| 1.3.6.1.4.1.9.5.1.7.5.1.1 | ColumnfilterPortModule | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.7.5.1.2 | ColumnfilterPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.7.5.1.3 | ColumnfilterPortComplex | read-write | current | A complex expression made up of the numbers 1 through 8 indicating test results from filterTestIndex and using logical operators '&' (and), '|' (or), '!' (not)… |
| 1.3.6.1.4.1.9.5.1.7.5.1.4 | ColumnfilterPortBroadcastThrottle | read-write | current | The maximum number of broadcast packets per second allowed on this port. If the number of incoming broadcast packets in a one second interval exceeds this amou… |
| 1.3.6.1.4.1.9.5.1.7.5.1.5 | ColumnfilterPortBroadcastThreshold | read-write | current | Indicates the integer part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. The associ… |
| 1.3.6.1.4.1.9.5.1.7.5.1.6 | ColumnfilterPortBroadcastDiscards | read-only | current | The number of packets discarded due to traffic suppression on this port. |
| 1.3.6.1.4.1.9.5.1.7.5.1.7 | ColumnfilterPortBroadcastThresholdFraction | read-write | current | Indicates the fraction part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. The assoc… |
| 1.3.6.1.4.1.9.5.1.7.5.1.8 | ColumnfilterPortSuppressionOption | read-write | current | Indicates the traffic types that traffic suppression feature is enabled for. multicast(0) is set when multicast suppression is enabled. unicast(1) is set when … |
| 1.3.6.1.4.1.9.5.1.7.5.1.9 | ColumnfilterPortSuppressionViolation | read-write | current | Indicates the action that will be taken on this port when the percentage of either broadcast, multicast or unicast traffic exceeds the limit as indicated by fi… |
| 1.3.6.1.4.1.9.5.1.8 | NodemonitorGrp | |||
| 1.3.6.1.4.1.9.5.1.8.1 | ScalarmonitorSourceModule | read-write | deprecated | An index value that uniquely identifies the module where the monitoring source port is located. A value of 0 indicates that the monitorSourcePort is really a s… |
| 1.3.6.1.4.1.9.5.1.8.2 | ScalarmonitorSourcePort | read-write | deprecated | An index value that uniquely identifies the monitoring source port within a module or the monitoring source Virtual LAN. To monitor multiple source ports, this… |
| 1.3.6.1.4.1.9.5.1.8.3 | ScalarmonitorDestinationModule | read-write | deprecated | An index value that uniquely identifies the module where the monitoring destination port is located. |
| 1.3.6.1.4.1.9.5.1.8.4 | ScalarmonitorDestinationPort | read-write | deprecated | An index value that uniquely identifies the monitoring destination port within a module. |
| 1.3.6.1.4.1.9.5.1.8.5 | ScalarmonitorDirection | read-write | deprecated | The type of packets to be monitored at the source port. |
| 1.3.6.1.4.1.9.5.1.8.6 | ScalarmonitorEnable | read-write | deprecated | Indicates whether port monitoring is in progress. |
| 1.3.6.1.4.1.9.5.1.8.7 | ScalarmonitorAdminSourcePorts | read-write | deprecated | Indicates the administrative status of which ports are monitored. All the monitored ports have to be non-trunking port and belong to the same Virtual LAN. The … |
| 1.3.6.1.4.1.9.5.1.8.8 | ScalarmonitorOperSourcePorts | read-only | deprecated | Indicates which ports are actually being monitored. All the monitored ports have to be non-trunking port and belong to the same Virtual LAN. The octet string c… |
| 1.3.6.1.4.1.9.5.1.9 | NodevlanGrp | |||
| 1.3.6.1.4.1.9.5.1.9.2 | TablevlanTable | not-accessible | deprecated | A list of Virtual LAN entries. The number of entries is determined by the number of VLANs supported by the system. |
| 1.3.6.1.4.1.9.5.1.9.2.1 | RowvlanEntry | not-accessible | deprecated | Entry containing information for a particular Virtual LAN. |
| 1.3.6.1.4.1.9.5.1.9.2.1.1 | ColumnvlanIndex | read-only | deprecated | An index value that uniquely identifies the Virtual LAN associated with this information. |
| 1.3.6.1.4.1.9.5.1.9.2.1.2 | ColumnvlanSpantreeEnable | read-write | deprecated | Indicates whether Spanning Tree protocol is enabled for this Virtual LAN. If the device only supports a single global Spanning Tree PVST+ Protocol enable/disab… |
| 1.3.6.1.4.1.9.5.1.9.2.1.3 | ColumnvlanIfIndex | read-only | deprecated | The value of the ifIndex object defined in MIB-II, for the interface corresponding to this VLAN. This object is deprecated and replaced by vtpVlanIfIndex in CI… |
| 1.3.6.1.4.1.9.5.1.9.3 | TablevlanPortTable | not-accessible | current | A list of Virtual LAN port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module. |
| 1.3.6.1.4.1.9.5.1.9.3.1 | RowvlanPortEntry | not-accessible | current | Entry containing Virtual LAN information for a particular port on a module. |
| 1.3.6.1.4.1.9.5.1.9.3.1.1 | ColumnvlanPortModule | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.9.3.1.2 | ColumnvlanPort | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.9.3.1.3 | ColumnvlanPortVlan | read-write | current | The Virtual LAN to which this port belongs. |
| 1.3.6.1.4.1.9.5.1.9.3.1.5 | ColumnvlanPortIslVlansAllowed | read-write | current | An indication of which Virtual LANs are allowed on this Inter-Switch Link. This is an octet string value with bits set to indicate allowed VLANs. It can be int… |
| 1.3.6.1.4.1.9.5.1.9.3.1.6 | ColumnvlanPortSwitchLevel | read-write | current | Indicates the priority level the port uses to access the switching media. If vlanPortSwitchLevel is not applicable to the port, notApplicable(3) will be return… |
| 1.3.6.1.4.1.9.5.1.9.3.1.7 | ColumnvlanPortIslAdminStatus | read-write | current | Indicates the administrative status set on the trunk port while the operational status is the one that indicates whether the port is actually trunking or not. … |
| 1.3.6.1.4.1.9.5.1.9.3.1.8 | ColumnvlanPortIslOperStatus | read-only | current | Indicates if the port is actually trunking or not. In the case of ISL capable ports, the status depends on the success or failure of the negotiation process in… |
| 1.3.6.1.4.1.9.5.1.9.3.1.9 | ColumnvlanPortIslPriorityVlans | read-write | current | An indication of which Virtual LANs have a better dot1dStpPortPriority value. This object can be used to perform load balancing on Inter-Switch Links via spann… |
| 1.3.6.1.4.1.9.5.1.9.3.1.10 | ColumnvlanPortAdminStatus | read-write | current | Indicates whether the port will get assigned to a VLAN statically or dynamically. When it is set to dynamic, the needed information will be accessed from one o… |
| 1.3.6.1.4.1.9.5.1.9.3.1.11 | ColumnvlanPortOperStatus | read-only | current | An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned or that a static … |
| 1.3.6.1.4.1.9.5.1.9.3.1.12 | ColumnvlanPortAuxiliaryVlan | read-write | deprecated | The Voice Virtual Vlan ID (VVID) to which this port belongs to. If the VVID is not supported on the port, this MIB object will not be configurable and will ret… |
| 1.3.6.1.4.1.9.5.1.9.4 | TablevmpsTable | not-accessible | current | This table lists a maximum of 3 IP addresses of Vlan Membership Policy Servers. |
| 1.3.6.1.4.1.9.5.1.9.4.1 | RowvmpsEntry | not-accessible | current | A VMPS table entry. |
| 1.3.6.1.4.1.9.5.1.9.4.1.1 | ColumnvmpsAddr | read-only | current | The IP address of a Vlan Membership Policy Server. To configure the internal VMPS, use the same IP address as specified in sysIpAddr. |
| 1.3.6.1.4.1.9.5.1.9.4.1.2 | ColumnvmpsType | read-create | current | To add a new entry to the vmpsTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be u… |
| 1.3.6.1.4.1.9.5.1.9.5 | ScalarvmpsAction | read-write | current | This object, when read, returns the result of the last action requested: other(1), inProgress(2), success(3), noResponse(3), noPrimaryVmps(5), noDynamicPort(6)… |
| 1.3.6.1.4.1.9.5.1.9.6 | ScalarvmpsAccessed | read-only | current | The IP address of the last Vlan Membership Policy Server accessed. If there was no response from the last VMPS request, the value returned is 0. |
| 1.3.6.1.4.1.9.5.1.9.7 | ScalarvlanTrunkMappingMax | read-only | current | Maximum number of active configurable trunk VLAN mapping entries allowed. A value of zero indicates no limitation on the number of active configurable trunk VL… |
| 1.3.6.1.4.1.9.5.1.9.8 | TablevlanTrunkMappingTable | not-accessible | current | This table contains zero or more rows of trunk VLAN to VLAN associations. The maximum number of active entries is determined by vlanTrunkMappingMax. VLAN above… |
| 1.3.6.1.4.1.9.5.1.9.8.1 | RowvlanTrunkMappingEntry | not-accessible | current | Information about the VLAN mapping of a particular trunk VLAN to another VLAN. |
| 1.3.6.1.4.1.9.5.1.9.8.1.1 | ColumnvlanTrunkMappingFromVlan | not-accessible | current | The VLAN with this VLAN ID will be mapped to the VLAN in the corresponding instance of vlanTrunkMappingToVlan in the device. Agent returns inconsistentValue if… |
| 1.3.6.1.4.1.9.5.1.9.8.1.2 | ColumnvlanTrunkMappingToVlan | read-create | current | The VLAN which the corresponding instance of vlanTrunkMappingFromVlan will be mapped to. Agent returns inconsistentValue if this VLAN exists in the device. Age… |
| 1.3.6.1.4.1.9.5.1.9.8.1.3 | ColumnvlanTrunkMappingType | read-create | current | The type of this trunk VLAN mapping. reservedToNonReserved(1) An user defined association which maps a reserved VLAN to a non-reserved VLAN. dot1qToisl(2) An u… |
| 1.3.6.1.4.1.9.5.1.9.8.1.4 | ColumnvlanTrunkMappingOper | read-only | current | Indicates whether this VLAN mapping is effective or not. |
| 1.3.6.1.4.1.9.5.1.9.8.1.5 | ColumnvlanTrunkMappingStatus | read-create | current | The status of this trunk VLAN mapping. Once a row becomes active, value in any other column within such row cannot be modified except by setting vlanTrunkMappi… |
| 1.3.6.1.4.1.9.5.1.10 | NodesecurityGrp | |||
| 1.3.6.1.4.1.9.5.1.10.1 | TableportSecurityTable | not-accessible | current | A list of port security entries. The number of entries is determined by the number of ports in the system which support the Security feature. |
| 1.3.6.1.4.1.9.5.1.10.1.1 | RowportSecurityEntry | not-accessible | current | Entry containing security information for a particular port. |
| 1.3.6.1.4.1.9.5.1.10.1.1.1 | ColumnportSecurityModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.10.1.1.2 | ColumnportSecurityPortIndex | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.10.1.1.3 | ColumnportSecurityAdminStatus | read-write | current | When security is enabled, source MAC addresses are monitored for all packets received on the port. If an address is detected that does not match the portSecuri… |
| 1.3.6.1.4.1.9.5.1.10.1.1.4 | ColumnportSecurityOperStatus | read-only | current | An indication of whether the port has been shut down as a result of an insecure address being detected on a secure port. |
| 1.3.6.1.4.1.9.5.1.10.1.1.5 | ColumnportSecurityLastSrcAddr | read-only | current | The last source MAC address in a receive packet seen on the port. |
| 1.3.6.1.4.1.9.5.1.10.1.1.6 | ColumnportSecuritySecureSrcAddr | read-write | current | The address to be compared with source MAC addresses of received packets when the portSecurityAdminStatus is enabled(1). Setting this value to 0.0.0.0.0.0 puts… |
| 1.3.6.1.4.1.9.5.1.10.1.1.7 | ColumnportSecurityMaxSrcAddr | read-write | current | The maximum number (N) of MAC address to be secured on the port. The first N MAC addresses learned or configured are made secured. If the user wants to make th… |
| 1.3.6.1.4.1.9.5.1.10.1.1.8 | ColumnportSecurityAgingTime | read-write | current | The interval in which the port is secured. After the expiration of the time, the corresponding portSecuritySecureSrcAddr or portSecurityExtSecureSrcAddr will b… |
| 1.3.6.1.4.1.9.5.1.10.1.1.9 | ColumnportSecurityShutdownTimeOut | read-write | current | The interval in which the port is shutdown due to the violation of security. After the expiration of the time all the security configuration of this port is re… |
| 1.3.6.1.4.1.9.5.1.10.1.1.10 | ColumnportSecurityViolationPolicy | read-write | current | If the value of this object is restrict(1) - the port drops all packets with insecured addresses. shutdown(2) - the port is forced to shut down if there is a v… |
| 1.3.6.1.4.1.9.5.1.10.2 | TableportSecurityExtTable | not-accessible | current | A list of port security entries. The number of entries is determined by the number of ports in the system which support the Security feature and the number of … |
| 1.3.6.1.4.1.9.5.1.10.2.1 | RowportSecurityExtEntry | not-accessible | current | Entry containing security information for a particular port and a particular MAC address. The entry can be configured by the user and can be added by the agent… |
| 1.3.6.1.4.1.9.5.1.10.2.1.1 | ColumnportSecurityExtModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.10.2.1.2 | ColumnportSecurityExtPortIndex | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.10.2.1.3 | ColumnportSecurityExtSecureSrcAddr | read-only | current | An index value that uniquely identifies the MAC address, which is to be secured. |
| 1.3.6.1.4.1.9.5.1.10.2.1.4 | ColumnportSecurityExtControlStatus | read-create | current | This object used to add or remove a secured MAC address of the corresponding port in the row. If setting this object to valid(1), the portSecurityExtSecureSrcA… |
| 1.3.6.1.4.1.9.5.1.11 | NodetokenRingGrp | |||
| 1.3.6.1.4.1.9.5.1.11.1 | TabletokenRingPortTable | not-accessible | current | Table containing token ring configuration information. |
| 1.3.6.1.4.1.9.5.1.11.1.1 | RowtokenRingPortEntry | not-accessible | current | Entry containing token ring configuration information for a particular port. |
| 1.3.6.1.4.1.9.5.1.11.1.1.1 | ColumntokenRingModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.11.1.1.2 | ColumntokenRingPortIndex | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.11.1.1.3 | ColumntokenRingPortSetACbits | read-write | current | Specifies if the AC bits shall be set unconditionally when a port forwards certain LLC frames. |
| 1.3.6.1.4.1.9.5.1.11.1.1.4 | ColumntokenRingPortMode | read-write | current | Specifies the port's mode of operation. auto: Automatically detect the port mode upon insertion. fdxCport: Transmit Immediate (full-duplex) Concentrator Port f… |
| 1.3.6.1.4.1.9.5.1.11.1.1.9 | ColumntokenRingPortEarlyTokenRel | read-write | current | This object provides the ability to enable or disable early token release for a particular port. Early token release only applies to ports operating at 16 Mbps… |
| 1.3.6.1.4.1.9.5.1.11.1.1.10 | ColumntokenRingPortPriorityThresh | read-write | current | The highest token ring frame priority that shall go to the low-priority transmit queue. |
| 1.3.6.1.4.1.9.5.1.11.1.1.11 | ColumntokenRingPortPriorityMinXmit | read-write | current | The minimum token priority that will be used for transmit. |
| 1.3.6.1.4.1.9.5.1.11.1.1.12 | ColumntokenRingPortCfgLossThresh | read-write | current | Number of configuration loss events during the sample interval which, if exceeded, should cause the port to be disabled. If the port is disabled by this functi… |
| 1.3.6.1.4.1.9.5.1.11.1.1.13 | ColumntokenRingPortCfgLossInterval | read-write | current | The sampling interval, in minutes, for which the port monitors to see if the configuration loss threshold has been exceeded. |
| 1.3.6.1.4.1.9.5.1.11.2 | ScalartokenRingDripDistCrfMode | read-write | current | This object reflects whether TR-CRFs can be distributed across ISL topologies. Setting this object to enabled(1) allows TR-CRFs to be distributed. Setting this… |
| 1.3.6.1.4.1.9.5.1.11.3 | ScalartokenRingDripAreReductionMode | read-write | current | This object reflects whether or not All Routes Explorer (ARE) reduction capabilities are enabled or disabled on this system. Setting this object to enabled(1) … |
| 1.3.6.1.4.1.9.5.1.11.4 | ScalartokenRingDripLocalNodeID | read-only | current | The unique system identifier that will be sent in all advertisements generated by this system. It uniquely identifies this system from other DRiP capable syste… |
| 1.3.6.1.4.1.9.5.1.11.5 | ScalartokenRingDripLastRevision | read-only | current | The revision number transmitted in the most recent advertisement. That advertisement may or may not have contained changed data. |
| 1.3.6.1.4.1.9.5.1.11.6 | ScalartokenRingDripLastChangedRevision | read-only | current | The revision number transmitted in the most recent advertisement containing changed data. |
| 1.3.6.1.4.1.9.5.1.11.7 | ScalartokenRingDripAdvertsReceived | read-only | current | The number of DRiP advertisements received by this system. |
| 1.3.6.1.4.1.9.5.1.11.8 | ScalartokenRingDripAdvertsTransmitted | read-only | current | The number of DRiP advertisements transmitted by this system. |
| 1.3.6.1.4.1.9.5.1.11.9 | ScalartokenRingDripAdvertsProcessed | read-only | current | The number of DRiP advertisements processed by this system. |
| 1.3.6.1.4.1.9.5.1.11.10 | ScalartokenRingDripInputQueueDrops | read-only | current | The number of DRiP advertisements dropped from this system's input queue. |
| 1.3.6.1.4.1.9.5.1.11.11 | ScalartokenRingDripOutputQueueDrops | read-only | current | The number of DRiP advertisements dropped from this system's output queue. |
| 1.3.6.1.4.1.9.5.1.11.12 | TabletokenRingDripLocalVlanStatusTable | not-accessible | current | A table containing DRiP VLAN status information local to this system. The existence of an entry indicates that at least one local port is assigned to the assoc… |
| 1.3.6.1.4.1.9.5.1.11.12.1 | RowtokenRingDripLocalVlanStatusEntry | not-accessible | current | Entry containing DRiP related information for a particular TR-CRF VLAN. |
| 1.3.6.1.4.1.9.5.1.11.12.1.1 | ColumntokenRingDripVlan | read-only | current | A TR-CRF VLAN ID. |
| 1.3.6.1.4.1.9.5.1.11.12.1.2 | ColumntokenRingDripLocalPortStatus | read-only | current | This object reflects DRiP's status regarding the overall set of local ports assigned to the TR-CRF VLAN associated with this entry. A value of active(1) indica… |
| 1.3.6.1.4.1.9.5.1.11.12.1.3 | ColumntokenRingDripRemotePortStatus | read-only | current | This object reflects DRiP's status regarding any ports on remote systems. A value of active(1) indicates that at least one remote port is inserted/connected (i… |
| 1.3.6.1.4.1.9.5.1.11.12.1.4 | ColumntokenRingDripRemotePortConfigured | read-only | current | This object reflects whether or not DRiP has detected remote ports assigned to the TR-CRF VLAN associated with this entry. A value of true(1) indicates there i… |
| 1.3.6.1.4.1.9.5.1.11.12.1.5 | ColumntokenRingDripDistributedCrf | read-only | current | This object reflects whether DRiP considers the TR-CRF VLAN associated with this entry to be distributed across systems. A value of true(1) indicates the TR-CR… |
| 1.3.6.1.4.1.9.5.1.11.12.1.6 | ColumntokenRingDripBackupCrf | read-only | current | This object reflects whether or not the TR-CRF VLAN associated with this entry is configured as a backup TR-CRF. A value of true(1) indicates the TR-CRF is a c… |
| 1.3.6.1.4.1.9.5.1.11.12.1.7 | ColumntokenRingDripOwnerNodeID | read-only | current | The unique identifier of the system that has advertised that it has local ports assigned to the TR-CRF VLAN associated with this entry. |
| 1.3.6.1.4.1.9.5.1.11.14 | TabletokenRingPortSoftErrTable | not-accessible | current | Table containing token ring soft error monitoring configuration information. |
| 1.3.6.1.4.1.9.5.1.11.14.1 | RowtokenRingPortSoftErrEntry | not-accessible | current | Entry containing token ring soft error monitoring configuration information for a particular port. |
| 1.3.6.1.4.1.9.5.1.11.14.1.1 | ColumntokenRingPortSoftErrThresh | read-write | current | The number of soft errors reported from a station connected to this port which, if exceeded, should cause a soft error exceeded trap to be issued. The error co… |
| 1.3.6.1.4.1.9.5.1.11.14.1.2 | ColumntokenRingPortSoftErrReportInterval | read-write | current | The sampling period, in seconds, in which each station connected to this port will be monitored for excessive soft error reports. If a station reports more tha… |
| 1.3.6.1.4.1.9.5.1.11.14.1.3 | ColumntokenRingPortSoftErrResetCounters | read-write | current | When this object is set to reset(2), all Soft Error Monitoring related counters on this port will be set to 0. |
| 1.3.6.1.4.1.9.5.1.11.14.1.4 | ColumntokenRingPortSoftErrLastCounterReset | read-only | current | The time (in hundredths of a second) since Soft Error Monitoring counters for this port were last cleared. |
| 1.3.6.1.4.1.9.5.1.11.14.1.5 | ColumntokenRingPortSoftErrEnable | read-write | current | Indicates whether the Token Ring Soft Error Monitoring feature is enabled on this port or not. The detailed soft error statistics are provided by Token Ring RM… |
| 1.3.6.1.4.1.9.5.1.12 | NodemulticastGrp | |||
| 1.3.6.1.4.1.9.5.1.12.1 | TablemcastRouterTable | not-accessible | current | A list of multicast router port entries. The number of entries is determined by the number of ports in the system. |
| 1.3.6.1.4.1.9.5.1.12.1.1 | RowmcastRouterEntry | not-accessible | current | Entry containing multicast router information for a particular port. |
| 1.3.6.1.4.1.9.5.1.12.1.1.1 | ColumnmcastRouterModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.12.1.1.2 | ColumnmcastRouterPortIndex | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.12.1.1.3 | ColumnmcastRouterAdminStatus | read-write | current | And indication of whether the presence of an IP multicast router on this port is to be determined statically or dynamically. The value routerPresent(1) indicat… |
| 1.3.6.1.4.1.9.5.1.12.1.1.4 | ColumnmcastRouterOperStatus | read-only | current | An indication of whether an IP multicast router is present on this port. |
| 1.3.6.1.4.1.9.5.1.12.2 | ScalarmcastEnableCgmp | read-write | current | Indicates whether Cisco Group Management Protocol is enabled on the device or not. When CGMP is enabled in conjunction with Cisco routers running CGMP, only th… |
| 1.3.6.1.4.1.9.5.1.12.3 | ScalarmcastEnableIgmp | read-write | current | Indicates whether Internet Group Management Protocol is enabled on the device or not. When IGMP is enabled in conjunction with Cisco routers running CGMP, only… |
| 1.3.6.1.4.1.9.5.1.12.4 | ScalarmcastEnableRgmp | read-write | current | Indicates whether Router Group Management Protocol is enabled on the device or not. When RGMP is enabled in conjunction with Cisco routers running RGMP, multic… |
| 1.3.6.1.4.1.9.5.1.13 | NodednsGrp | |||
| 1.3.6.1.4.1.9.5.1.13.1 | ScalardnsEnable | read-write | current | Indicates if the DNS feature is enabled or disabled. |
| 1.3.6.1.4.1.9.5.1.13.2 | TablednsServerTable | not-accessible | current | This table lists a maximum of 3 DNS servers. |
| 1.3.6.1.4.1.9.5.1.13.2.1 | RowdnsServerEntry | not-accessible | current | A DNS server table entry. |
| 1.3.6.1.4.1.9.5.1.13.2.1.1 | ColumndnsServerAddr | read-only | current | The IP address of a DNS server. |
| 1.3.6.1.4.1.9.5.1.13.2.1.2 | ColumndnsServerType | read-create | current | To add a new entry to the dnsServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will… |
| 1.3.6.1.4.1.9.5.1.13.3 | ScalardnsDomainName | read-write | current | DNS domain name. |
| 1.3.6.1.4.1.9.5.1.14 | NodesyslogGrp | |||
| 1.3.6.1.4.1.9.5.1.14.1 | TablesyslogServerTable | not-accessible | current | This table lists a maximum of 3 system log servers. |
| 1.3.6.1.4.1.9.5.1.14.1.1 | RowsyslogServerEntry | not-accessible | current | A system log server table entry. |
| 1.3.6.1.4.1.9.5.1.14.1.1.1 | ColumnsyslogServerAddr | read-only | current | The IP address of a system log Server. |
| 1.3.6.1.4.1.9.5.1.14.1.1.2 | ColumnsyslogServerType | read-create | current | To add/remove a new entry to the syslogServerTable, setting to invalid(2) removes the corresponding entry from the syslogServerTable. To add a new entry into s… |
| 1.3.6.1.4.1.9.5.1.14.2 | ScalarsyslogConsoleEnable | read-write | current | Indicate whether the system log messages should be sent to console. |
| 1.3.6.1.4.1.9.5.1.14.3 | ScalarsyslogHostEnable | read-write | current | Indicate whether the system log messages should be sent to syslog servers. |
| 1.3.6.1.4.1.9.5.1.14.4 | TablesyslogMessageControlTable | not-accessible | current | This table contains the information about what system log messages should be sent to syslog host, console, login session, and/or logged into the internal buffe… |
| 1.3.6.1.4.1.9.5.1.14.4.1 | RowsyslogMessageControlEntry | not-accessible | current | A system log message control table entry. |
| 1.3.6.1.4.1.9.5.1.14.4.1.1 | ColumnsyslogMessageFacility | read-only | current | System log message facility. |
| 1.3.6.1.4.1.9.5.1.14.4.1.2 | ColumnsyslogMessageSeverity | read-create | current | System log message severity. |
| 1.3.6.1.4.1.9.5.1.14.5 | ScalarsyslogTimeStampOption | read-write | current | Indicates whether syslog Time Stamp Option is enabled or not. If it is set to enabled(1), the Time Stamp will be in the beginning of each syslog message. |
| 1.3.6.1.4.1.9.5.1.14.6 | ScalarsyslogTelnetEnable | read-write | current | Indicate whether the system log messages should be sent to telnet sessions. |
| 1.3.6.1.4.1.9.5.1.15 | NodentpGrp | |||
| 1.3.6.1.4.1.9.5.1.15.1 | ScalarntpBcastClient | read-write | current | Entry which tells if Cat5000 should act as a Broadcast client or not. |
| 1.3.6.1.4.1.9.5.1.15.2 | ScalarntpBcastDelay | read-write | current | Estimated Round trip time (in micro seconds) for NTP broadcasts. The range is from 1 to 999999. |
| 1.3.6.1.4.1.9.5.1.15.3 | ScalarntpClient | read-write | current | Entry which tells if the device can act as a NTP client (in a client-server configuration type). |
| 1.3.6.1.4.1.9.5.1.15.4 | TablentpServerTable | not-accessible | current | A list of NTP Server entries. This table lists a maximum of 10 Entries. |
| 1.3.6.1.4.1.9.5.1.15.4.1 | RowntpServerEntry | not-accessible | current | Entry containing NTP information for a particular entry. |
| 1.3.6.1.4.1.9.5.1.15.4.1.1 | ColumnntpServerAddress | read-only | current | Entry containing NTP Server's IP address. |
| 1.3.6.1.4.1.9.5.1.15.4.1.2 | ColumnntpServerType | read-write | current | To add or remove an entry to ntpServerTable. Setting to 1 adds the entry and setting to 2 clears the entry. |
| 1.3.6.1.4.1.9.5.1.15.4.1.3 | ColumnntpServerPublicKey | read-write | current | The key to be used when communicating with this server. A key with a value of zero indicates an invalid ntpServerPublicKey. When the authentication feature is … |
| 1.3.6.1.4.1.9.5.1.15.5 | ScalarntpSummertimeStatus | read-write | current | Enabling or Disabling will set the clock ahead or behind 1 hour respectively.(daylight savings time in USA). This command gets active only in Summer time. |
| 1.3.6.1.4.1.9.5.1.15.6 | ScalarntpSummerTimezoneName | read-write | current | Summertime time zone name for display purposes. |
| 1.3.6.1.4.1.9.5.1.15.7 | ScalarntpTimezoneName | read-write | current | Time zone name for display purposes. |
| 1.3.6.1.4.1.9.5.1.15.8 | ScalarntpTimezoneOffsetHour | read-write | current | Time offset (Hour) from Greenwich Mean Time. |
| 1.3.6.1.4.1.9.5.1.15.9 | ScalarntpTimezoneOffsetMinute | read-write | current | Time offset (Minutes) from Greenwich Mean Time. |
| 1.3.6.1.4.1.9.5.1.15.10 | ScalarntpAuthenticationEnable | read-write | current | Specifies if authentication feature is enabled or disabled in the system. |
| 1.3.6.1.4.1.9.5.1.15.11 | TablentpAuthenticationTable | not-accessible | current | A list of NTP Authentication Key entries. This table lists a maximum of 10 Entries |
| 1.3.6.1.4.1.9.5.1.15.11.1 | RowntpAuthenticationEntry | not-accessible | current | An entry in the ntpAuthenticationTable, containing values of an NTP authentication key pair. |
| 1.3.6.1.4.1.9.5.1.15.11.1.1 | ColumnntpAuthenticationPublicKey | read-only | current | A unique value to identify the authentication key. When the authentication feature is enabled and the ntpAuthenticationPublicKey matches with the NTP packet's … |
| 1.3.6.1.4.1.9.5.1.15.11.1.2 | ColumnntpAuthenticationSecretKey | read-write | current | An arbitrary string known as the secret key used for encrypting of the NTP packet. This key is useful when the ntpAuthenticationTrustedMode is set to trusted(1… |
| 1.3.6.1.4.1.9.5.1.15.11.1.3 | ColumnntpAuthenticationTrustedMode | read-write | current | A flag indicates whether the ntpAuthenticationSecretKey is trusted or untrusted. Setting a ntpAuthenticationSecretKey to trusted(1) allows authentication on NT… |
| 1.3.6.1.4.1.9.5.1.15.11.1.4 | ColumnntpAuthenticationType | read-write | current | To add or remove an entry to ntpAuthenticationTable. Setting to 1 adds the entry and setting to 2 clears the entry. |
| 1.3.6.1.4.1.9.5.1.16 | NodetacacsGrp | |||
| 1.3.6.1.4.1.9.5.1.16.1 | ScalartacacsLoginAuthentication | read-write | deprecated | Indicates whether the login authentication using the TACACS+ feature is enabled or disabled for console sessions and/or telnet sessions. Setting this object to… |
| 1.3.6.1.4.1.9.5.1.16.2 | ScalartacacsEnableAuthentication | read-write | deprecated | Indicates whether the enable authentication using the TACACS+ feature is enabled or disabled for console sessions and/or telnet sessions based on the value. Se… |
| 1.3.6.1.4.1.9.5.1.16.3 | ScalartacacsLocalLoginAuthentication | read-write | deprecated | Indicates whether the login authentication using local password is enabled or disabled for Console session and/or Telnet session based on the value. Setting th… |
| 1.3.6.1.4.1.9.5.1.16.4 | ScalartacacsLocalEnableAuthentication | read-write | deprecated | Indicates whether the enable authentication using local password is enabled or disabled for Console session and/or Telnet sessions. Setting this object to enab… |
| 1.3.6.1.4.1.9.5.1.16.5 | ScalartacacsNumLoginAttempts | read-write | deprecated | The number of login attempts allowed. This object is deprecated and replaced by cacMaxLoginAttempt in CISCO-AAA-CLIENT-MIB. |
| 1.3.6.1.4.1.9.5.1.16.6 | ScalartacacsDirectedRequest | read-write | current | Indicates whether the directed-request feature of TACACS+ is enabled or disabled. |
| 1.3.6.1.4.1.9.5.1.16.7 | ScalartacacsTimeout | read-write | deprecated | The duration in seconds to wait for a response from the TACACS+ server host. This object is deprecated and replaced by cacLockoutPeriodExt in CISCO-AAA-CLIENT-… |
| 1.3.6.1.4.1.9.5.1.16.8 | ScalartacacsAuthKey | read-write | current | The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. Note that this i… |
| 1.3.6.1.4.1.9.5.1.16.9 | TabletacacsServerTable | not-accessible | current | This table lists a maximum of 3 TACACS+ servers. |
| 1.3.6.1.4.1.9.5.1.16.9.1 | RowtacacsServerEntry | not-accessible | current | A TACACS+ server table entry. |
| 1.3.6.1.4.1.9.5.1.16.9.1.1 | ColumntacacsServerAddr | read-only | current | The IP address of a TACACS+ Server. |
| 1.3.6.1.4.1.9.5.1.16.9.1.2 | ColumntacacsServerType | read-create | current | To add a new entry to the tacacsServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry w… |
| 1.3.6.1.4.1.9.5.1.17 | NodeipPermitListGrp | |||
| 1.3.6.1.4.1.9.5.1.17.1 | ScalaripPermitEnable | read-write | deprecated | This is deprecated and replaced by ipPermitAccessTypeEnable. Indicate whether the IP permit feature is enabled or disabled for Telnet and/or SNMP. Setting this… |
| 1.3.6.1.4.1.9.5.1.17.2 | TableipPermitListTable | not-accessible | current | This table lists a maximum of 100 IP Addresses with net masks of IP permit hosts. If ipPermitEnable is set to enabled(1), the system will only accept inbound a… |
| 1.3.6.1.4.1.9.5.1.17.2.1 | RowipPermitListEntry | not-accessible | current | A IP permit list table entry. |
| 1.3.6.1.4.1.9.5.1.17.2.1.1 | ColumnipPermitAddress | read-only | current | The IP address of a IP permit host. |
| 1.3.6.1.4.1.9.5.1.17.2.1.2 | ColumnipPermitMask | read-only | current | The IP net mask of a IP permit host. |
| 1.3.6.1.4.1.9.5.1.17.2.1.3 | ColumnipPermitType | read-create | current | Setting this object to invalid(2), removes the corresponding entry from the ipPermitListTable. To add a new entry into ipPermitListTable, set this object to va… |
| 1.3.6.1.4.1.9.5.1.17.2.1.4 | ColumnipPermitAccessType | read-create | current | The IP access type of a IP permit host. At least one access type has to be set. |
| 1.3.6.1.4.1.9.5.1.17.2.1.5 | ColumnipPermitTelnetConnectLimit | read-create | current | Indicates the telnet connection limit that will be applied when accepting new telnet connections for a specific host. A value of zero means no limit will be ap… |
| 1.3.6.1.4.1.9.5.1.17.2.1.6 | ColumnipPermitSshConnectLimit | read-create | current | Indicates the ssh connection limit that will be applied when accepting new ssh connections for a specific host. A value of zero means no limit will be applied … |
| 1.3.6.1.4.1.9.5.1.17.3 | TableipPermitDeniedListTable | not-accessible | current | This table lists up to 10 the most recently denied IP addresses with the access type. |
| 1.3.6.1.4.1.9.5.1.17.3.1 | RowipPermitDeniedListEntry | not-accessible | current | A IP permit denied list table entry. |
| 1.3.6.1.4.1.9.5.1.17.3.1.1 | ColumnipPermitDeniedAddress | read-only | current | The IP address of a IP permit denied access. |
| 1.3.6.1.4.1.9.5.1.17.3.1.2 | ColumnipPermitDeniedAccess | read-only | current | The denied access type. |
| 1.3.6.1.4.1.9.5.1.17.3.1.3 | ColumnipPermitDeniedTime | read-only | current | The time (in hundredths of a second) since the IP permit denied access happens. |
| 1.3.6.1.4.1.9.5.1.17.4 | ScalaripPermitAccessTypeEnable | read-write | current | This is to replace ipPermitEnable. Indicates whether the IP permit feature is enabled or disabled for Telnet, SNMP, ssh and http. If a bit is set the corespond… |
| 1.3.6.1.4.1.9.5.1.18 | NodeportChannelGrp | |||
| 1.3.6.1.4.1.9.5.1.18.1 | TableportChannelTable | not-accessible | deprecated | A list of port channel entries. The number of entries is determined by the number of ports in the system which support the Ethernet Channelling feature. This t… |
| 1.3.6.1.4.1.9.5.1.18.1.1 | RowportChannelEntry | not-accessible | deprecated | Entry containing information for a particular port on a module. |
| 1.3.6.1.4.1.9.5.1.18.1.1.1 | ColumnportChannelModuleIndex | read-only | deprecated | An index value that uniquely identifies the module where this port is located. |
| 1.3.6.1.4.1.9.5.1.18.1.1.2 | ColumnportChannelPortIndex | read-only | deprecated | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.18.1.1.3 | ColumnportChannelPorts | read-write | deprecated | The set of ports on a module channelling together. Each Octet within the value of this object specifies a set of eight ports, with the first octet specifying p… |
| 1.3.6.1.4.1.9.5.1.18.1.1.4 | ColumnportChannelAdminStatus | read-write | deprecated | Indicates the administrative status set on the channel ports. If the status is set to on(1), the channelling is enabled. If the status is set to off(2), the ch… |
| 1.3.6.1.4.1.9.5.1.18.1.1.5 | ColumnportChannelOperStatus | read-only | deprecated | Indicates whether the ports current channelling operational status is channel or not. |
| 1.3.6.1.4.1.9.5.1.18.1.1.6 | ColumnportChannelNeighbourDeviceId | read-only | deprecated | Indicates the neighbors device id. |
| 1.3.6.1.4.1.9.5.1.18.1.1.7 | ColumnportChannelNeighbourPortId | read-only | deprecated | Indicates the neighbor ports' Id. |
| 1.3.6.1.4.1.9.5.1.18.1.1.8 | ColumnportChannelProtInPackets | read-only | deprecated | Indicates the number of protocol packets received on the ports. |
| 1.3.6.1.4.1.9.5.1.18.1.1.9 | ColumnportChannelProtOutPackets | read-only | deprecated | Indicates the number of protocol packets transmitted on the ports. |
| 1.3.6.1.4.1.9.5.1.18.1.1.10 | ColumnportChannelIfIndex | read-only | deprecated | The value of the instance of the ifIndex object defined in MIB-II, for the interface corresponding to the channel which the port belongs to. This object will h… |
| 1.3.6.1.4.1.9.5.1.19 | NodeportCpbGrp | |||
| 1.3.6.1.4.1.9.5.1.19.1 | TableportCpbTable | not-accessible | current | A list of port capability entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module. |
| 1.3.6.1.4.1.9.5.1.19.1.1 | RowportCpbEntry | not-accessible | current | Entry containing port capability information for a particular port on a module. |
| 1.3.6.1.4.1.9.5.1.19.1.1.1 | ColumnportCpbModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located (see portModuleIndex). |
| 1.3.6.1.4.1.9.5.1.19.1.1.2 | ColumnportCpbPortIndex | read-only | current | An index value that uniquely identifies this port within a module (see portIndex). |
| 1.3.6.1.4.1.9.5.1.19.1.1.3 | ColumnportCpbSpeed | read-only | current | Indicates the port speed capability of a port. |
| 1.3.6.1.4.1.9.5.1.19.1.1.4 | ColumnportCpbDuplex | read-only | current | Indicates the duplex capability of a port. The fdx(4) is specially for tokenring full-duplex and hdx(3) is specially for tokenring half-duplex. |
| 1.3.6.1.4.1.9.5.1.19.1.1.5 | ColumnportCpbTrunkEncapsulationType | read-only | current | Indicates the VLAN encapsulation capability of a port, The dot10(1) is for 801.10 and dot1q(2) is for 801.1Q. |
| 1.3.6.1.4.1.9.5.1.19.1.1.6 | ColumnportCpbTrunkMode | read-only | current | Indicates the trunk capability of a port. |
| 1.3.6.1.4.1.9.5.1.19.1.1.7 | ColumnportCpbChannel | read-only | current | Indicates the channelling capability of a port. |
| 1.3.6.1.4.1.9.5.1.19.1.1.8 | ColumnportCpbBroadcastSuppression | read-only | current | Indicates the broadcast suppression capability of a port. The pps(0) is for ports capable of specifying suppression in packets per second and percentage(1) is … |
| 1.3.6.1.4.1.9.5.1.19.1.1.9 | ColumnportCpbFlowControl | read-only | current | Indicates the flow control capability of a port. |
| 1.3.6.1.4.1.9.5.1.19.1.1.10 | ColumnportCpbSecurity | read-only | current | Indicates whether a port supports security. |
| 1.3.6.1.4.1.9.5.1.19.1.1.11 | ColumnportCpbVlanMembership | read-only | current | Indicates the vlan membership capability of a port. |
| 1.3.6.1.4.1.9.5.1.19.1.1.12 | ColumnportCpbPortfast | read-only | current | Indicates whether a port supports portfast. |
| 1.3.6.1.4.1.9.5.1.19.1.1.13 | ColumnportCpbUdld | read-only | current | Indicates whether the port is capable of UDLD (UniDirectional Link Detection) or not. |
| 1.3.6.1.4.1.9.5.1.19.1.1.14 | ColumnportCpbInlinePower | read-only | current | Indicate the inline power capability of a port. 'auto' denotes the ability that the switch automatically determines whether or not power should be provided. 'o… |
| 1.3.6.1.4.1.9.5.1.19.1.1.15 | ColumnportCpbAuxiliaryVlan | read-only | current | Indicate the voice vlan capability of a port. |
| 1.3.6.1.4.1.9.5.1.19.1.1.16 | ColumnportCpbSpan | read-only | current | Indicates port span capabilities. source(0) denotes the capability of being SPAN source destination(1) denotes the capability of being SPAN destination, reflec… |
| 1.3.6.1.4.1.9.5.1.19.1.1.17 | ColumnportCpbCosRewrite | read-only | current | Indicates whether a port supports CoS rewrite. |
| 1.3.6.1.4.1.9.5.1.19.1.1.18 | ColumnportCpbTosRewrite | read-only | current | Indicates the ToS rewrite capability of a port. dscp(0) denotes the port capability to classify packets according to the DSCP. ipPrecedence(1) denotes the port… |
| 1.3.6.1.4.1.9.5.1.19.1.1.19 | ColumnportCpbCopsGrouping | read-only | current | The set of ports on a module that are configured together as far as the Differentiated Services Cops feature is concerned. Each Octet within the value of this … |
| 1.3.6.1.4.1.9.5.1.19.1.1.20 | ColumnportCpbDot1x | read-only | current | Indicates whether a port supports 802.1x. |
| 1.3.6.1.4.1.9.5.1.19.1.1.21 | ColumnportCpbIgmpFilter | read-only | current | Indicates whether a port supports IGMP filter. |
| 1.3.6.1.4.1.9.5.1.20 | NodeportTopNGrp | |||
| 1.3.6.1.4.1.9.5.1.20.1 | TableportTopNControlTable | not-accessible | current | A list of top N port control entries. |
| 1.3.6.1.4.1.9.5.1.20.1.1 | RowportTopNControlEntry | not-accessible | current | A set of parameters that control the creation of a report of the top N ports according to several metrics. For example, an instance of the portTopNDuration obj… |
| 1.3.6.1.4.1.9.5.1.20.1.1.1 | ColumnportTopNControlIndex | read-only | current | An index that uniquely identifies an entry in the portTopNControl table. Each such entry defines one top N report. |
| 1.3.6.1.4.1.9.5.1.20.1.1.2 | ColumnportTopNRateBase | read-create | current | The variable for all ports in this system based on which portTopNTable/report is ordered. This object may not be modified if the associated portTopNStatus obje… |
| 1.3.6.1.4.1.9.5.1.20.1.1.3 | ColumnportTopNType | read-create | current | The sampling port type. This object may not be modified if the associated portTopNStatus object is equal to active(1). |
| 1.3.6.1.4.1.9.5.1.20.1.1.4 | ColumnportTopNMode | read-create | current | The running mode of this portTopN control entry. portTopNForeground (1) means when portTopNTimeRemaining reaches to 0, the report will show on the CLI at once … |
| 1.3.6.1.4.1.9.5.1.20.1.1.5 | ColumnportTopNReportStatus | read-only | current | The report status of this portTopN control entry. Progressing (1) means that the report of this portTopN control entry is still in progress. The management sta… |
| 1.3.6.1.4.1.9.5.1.20.1.1.6 | ColumnportTopNDuration | read-create | current | The sampling interval in seconds during which statistics are collected for this report. When this is set a value and the corresponding portTopNControlEntry is … |
| 1.3.6.1.4.1.9.5.1.20.1.1.7 | ColumnportTopNTimeRemaining | read-only | current | The number of seconds left in the report currently being collected. When portTopNDuration object is modified by the management station, a new collection is sta… |
| 1.3.6.1.4.1.9.5.1.20.1.1.8 | ColumnportTopNStartTime | read-only | current | The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated portTopNTimeRemaining object was modified … |
| 1.3.6.1.4.1.9.5.1.20.1.1.9 | ColumnportTopNRequestedSize | read-create | current | The maximum number of ports requested for the top N entry. When this object is created or modified, the value of portTopNGrantedSize is set as closely to this … |
| 1.3.6.1.4.1.9.5.1.20.1.1.10 | ColumnportTopNGrantedSize | read-only | current | The maximum number of ports in the top N table. When the associated portTopNRequestedSize object is created or modified, the value of this object should be set… |
| 1.3.6.1.4.1.9.5.1.20.1.1.11 | ColumnportTopNOwner | read-create | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.9.5.1.20.1.1.12 | ColumnportTopNStatus | read-create | current | The status of this portTopNControl entry. The Management station sends the user set values with a portTopNStatus value of createAndGo(4). When the agent receiv… |
| 1.3.6.1.4.1.9.5.1.20.2 | TableportTopNTable | not-accessible | current | A list of top N port entries. |
| 1.3.6.1.4.1.9.5.1.20.2.1 | RowportTopNEntry | not-accessible | current | A set of statistics for a port that is part of a top N report. For example, an instance of the portTopNRateBase object might be named portTopNUtilization.3.10 |
| 1.3.6.1.4.1.9.5.1.20.2.1.1 | ColumnportTopNIndex | read-only | current | An index that uniquely identifies an entry in the portTopN table among those in the same report. This index is between 1 and N, where N is the portTopNGrantedS… |
| 1.3.6.1.4.1.9.5.1.20.2.1.2 | ColumnportTopNModuleNumber | read-only | current | The module number of the port counter data entry. |
| 1.3.6.1.4.1.9.5.1.20.2.1.3 | ColumnportTopNPortNumber | read-only | current | The port number of the port counter data entry. |
| 1.3.6.1.4.1.9.5.1.20.2.1.4 | ColumnportTopNUtilization | read-only | current | The utilization of the port in the system. The utilization is computed in the following methods: Ethernet Utilization: (If Full Duplex, multiply by 2) 10 Mbps … |
| 1.3.6.1.4.1.9.5.1.20.2.1.5 | ColumnportTopNIOOctets | read-only | current | The Input and Output octets of the port in the system. |
| 1.3.6.1.4.1.9.5.1.20.2.1.6 | ColumnportTopNIOPkts | read-only | current | The Input and Output packets of the port in the system. |
| 1.3.6.1.4.1.9.5.1.20.2.1.7 | ColumnportTopNIOBroadcast | read-only | current | The Input and Output broadcast packets of the port in the system. |
| 1.3.6.1.4.1.9.5.1.20.2.1.8 | ColumnportTopNIOMulticast | read-only | current | The Input and Output multicast packets of the port in the system. |
| 1.3.6.1.4.1.9.5.1.20.2.1.9 | ColumnportTopNInErrors | read-only | current | The Input error packets of the port in the system. |
| 1.3.6.1.4.1.9.5.1.20.2.1.10 | ColumnportTopNBufferOverFlow | read-only | current | The number of buffer overflow of the port in the system. |
| 1.3.6.1.4.1.9.5.1.21 | NodemdgGrp | |||
| 1.3.6.1.4.1.9.5.1.21.1 | TablemdgGatewayTable | not-accessible | current | This table lists a maximum of 3 MDG gateways. |
| 1.3.6.1.4.1.9.5.1.21.1.1 | RowmdgGatewayEntry | not-accessible | current | A MDG gateway table entry. |
| 1.3.6.1.4.1.9.5.1.21.1.1.1 | ColumnmdgGatewayAddr | read-only | current | The IP address of a default gateway. |
| 1.3.6.1.4.1.9.5.1.21.1.1.2 | ColumnmdgGatewayType | read-create | current | To add a new entry to the mdgGatewayTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry wil… |
| 1.3.6.1.4.1.9.5.1.22 | NoderadiusGrp | |||
| 1.3.6.1.4.1.9.5.1.22.1 | ScalarradiusLoginAuthentication | read-write | deprecated | Indicates whether the login authentication using RADIUS feature is enabled or disabled for console and/or telnet sessions. Setting this object to enabled(1), t… |
| 1.3.6.1.4.1.9.5.1.22.2 | ScalarradiusEnableAuthentication | read-write | deprecated | Indicates whether the enable authentication using the RADIUS feature is enabled or disabled for Console and telnet sessions. Setting this object to enabled(1),… |
| 1.3.6.1.4.1.9.5.1.22.3 | ScalarradiusDeadtime | read-write | current | Indicates the length of time in minutes that the system will mark the server dead when a RADIUS server does not respond to an authentication request. During th… |
| 1.3.6.1.4.1.9.5.1.22.4 | ScalarradiusAuthKey | read-write | current | The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. Note that this it… |
| 1.3.6.1.4.1.9.5.1.22.5 | ScalarradiusTimeout | read-write | current | This is the time in seconds between retransmissions to the RADIUS server. |
| 1.3.6.1.4.1.9.5.1.22.6 | ScalarradiusRetransmits | read-write | current | Indicates number of times the RADIUS server should be tried before giving up on the server. |
| 1.3.6.1.4.1.9.5.1.22.7 | TableradiusServerTable | not-accessible | deprecated | This table lists a maximum of 3 RADIUS servers. This object is deprecated and replaced by crRadiusServerTable in CISCO-RADIUS-MIB. |
| 1.3.6.1.4.1.9.5.1.22.7.1 | RowradiusServerEntry | not-accessible | deprecated | A RADIUS server table entry. |
| 1.3.6.1.4.1.9.5.1.22.7.1.1 | ColumnradiusServerAddr | read-only | deprecated | The IP address of a RADIUS Server. |
| 1.3.6.1.4.1.9.5.1.22.7.1.2 | ColumnradiusServerAuthPort | read-create | deprecated | This is the destination UDP port number to which RADIUS messages should be sent. The RADIUS server will not be used for authentication if this port number is 0. |
| 1.3.6.1.4.1.9.5.1.22.7.1.3 | ColumnradiusServerType | read-create | deprecated | To add a new entry to the radiusServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry w… |
| 1.3.6.1.4.1.9.5.1.24 | NodetraceRouteGrp | |||
| 1.3.6.1.4.1.9.5.1.24.1 | ScalartraceRouteMaxQueries | read-only | current | Maximum number of query entries allowed to be outstanding at any time, in the traceRouteQueryTable. The typical value for this object is 5. |
| 1.3.6.1.4.1.9.5.1.24.2 | TabletraceRouteQueryTable | not-accessible | current | A control table used to query the information about each gateway along the path to a host by specifying retrieval criteria for the host. The resulting data for… |
| 1.3.6.1.4.1.9.5.1.24.2.1 | RowtraceRouteQueryEntry | not-accessible | current | A conceptual row of the traceRouteQueryTable used to setup retrieval criteria to search for gateways belongs to the path to a particular host identified by its… |
| 1.3.6.1.4.1.9.5.1.24.2.1.1 | ColumntraceRouteQueryIndex | read-only | current | Object which specifies an unique entry in the traceRouteQueryTable. |
| 1.3.6.1.4.1.9.5.1.24.2.1.2 | ColumntraceRouteHost | read-create | current | Network(IP) address in dotted decimal format or the DNS hostname of the host which is tracerouted. |
| 1.3.6.1.4.1.9.5.1.24.2.1.3 | ColumntraceRouteQueryDNSEnable | read-create | current | If this value of this object is true, the traceroute operation will do a DNS lookup for each hop on the path, so the corresponding instance of the traceRouteDa… |
| 1.3.6.1.4.1.9.5.1.24.2.1.4 | ColumntraceRouteQueryWaitingTime | read-create | current | The trace route waiting time in seconds for an ICMP response message. |
| 1.3.6.1.4.1.9.5.1.24.2.1.5 | ColumntraceRouteQueryInitTTL | read-create | current | If this value of this object is set, it allows users skip processing for gateways that are less than traceRouteQueryInitTTL away by sending datagram with the v… |
| 1.3.6.1.4.1.9.5.1.24.2.1.6 | ColumntraceRouteQueryMaxTTL | read-create | current | The maximum TTL value used in outgoing packets. |
| 1.3.6.1.4.1.9.5.1.24.2.1.7 | ColumntraceRouteQueryUDPPort | read-create | current | The base UDP destination port is used in the traceroute datagrams. This value of this object is often larger than 30,000 to make it improbable that this port i… |
| 1.3.6.1.4.1.9.5.1.24.2.1.8 | ColumntraceRouteQueryPacketCount | read-create | current | Specifies the number of traceroute packets to send to the target host in this sequence. |
| 1.3.6.1.4.1.9.5.1.24.2.1.9 | ColumntraceRouteQueryPacketSize | read-create | current | Specifies the size of traceroute packets to send to the target host in this sequence. |
| 1.3.6.1.4.1.9.5.1.24.2.1.10 | ColumntraceRouteQueryTOS | read-create | current | The type of service to be set in the IP header of the outgoing packets.This value can set to see if different types-of-service result in different paths. Not a… |
| 1.3.6.1.4.1.9.5.1.24.2.1.21 | ColumntraceRouteQueryResult | read-only | current | The result status of the query. Possible values are: -1 -Either the query has not been initiated or the agent is busy processing this query instance. Time to c… |
| 1.3.6.1.4.1.9.5.1.24.2.1.22 | ColumntraceRouteQueryTime | read-only | current | The value of sysUpTime at the time when the query is configured. |
| 1.3.6.1.4.1.9.5.1.24.2.1.23 | ColumntraceRouteQueryOwner | read-create | current | The manager entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.9.5.1.24.2.1.24 | ColumntraceRouteQueryStatus | read-create | current | The status object used to manage rows in this table. When set this object to valid(1), the query is initiated. Once initiated, all the read-write objects of th… |
| 1.3.6.1.4.1.9.5.1.24.3 | TabletraceRouteDataTable | not-accessible | current | A table containing information about the gateway belongs to the path to the host corresponding to all the completed queries setup in the traceRouteQueryTable. |
| 1.3.6.1.4.1.9.5.1.24.3.1 | RowtraceRouteDataEntry | not-accessible | current | A conceptual row of the traceRouteDataTable used to return information about all the gateway belongs to the host of which search criteria is corresponding inst… |
| 1.3.6.1.4.1.9.5.1.24.3.1.1 | ColumntraceRouteDataIndex | read-only | current | Object which specifies an unique entry in the traceRouteDataTable. |
| 1.3.6.1.4.1.9.5.1.24.3.1.2 | ColumntraceRouteDataGatewayName | read-only | current | The DNS name of the gateway if available. |
| 1.3.6.1.4.1.9.5.1.24.3.1.3 | ColumntraceRouteDataGatewayIp | read-only | current | The ip address of the gateway. If the traceroute packet was sent and timed-out, the ip address is set to 0.0.0.0. |
| 1.3.6.1.4.1.9.5.1.24.3.1.4 | ColumntraceRouteDataRtt | read-only | current | The round trip time of the current packet that have been sent in this sequence. |
| 1.3.6.1.4.1.9.5.1.24.3.1.5 | ColumntraceRouteDataHopCount | read-only | current | The number of hop starting from the place where the traceroute operation is initialized to the gateway which has the traceRouteDataGatewayIp. |
| 1.3.6.1.4.1.9.5.1.24.3.1.6 | ColumntraceRouteDataErrors | read-only | current | The error of the traceroute operation. |
| 1.3.6.1.4.1.9.5.1.25 | NodefileCopyGrp | |||
| 1.3.6.1.4.1.9.5.1.25.1 | ScalarfileCopyProtocol | read-write | current | The protocol to be used for any remote copy. If the config file transfer is to occur locally on the SNMP agent, the method of transfer is left up to the implem… |
| 1.3.6.1.4.1.9.5.1.25.2 | ScalarfileCopyRemoteServer | read-write | current | The IP address or the host name of the tftp/rcp remote server from (or to) which to copy the file. If the copy operation is local on the SNMP agent, this objec… |
| 1.3.6.1.4.1.9.5.1.25.3 | ScalarfileCopySrcFileName | read-write | current | The source file name (including the path, if applicable) of the file. The accepted value of this object is 'cfg1' or 'cfg2' when the requested action is one of… |
| 1.3.6.1.4.1.9.5.1.25.4 | ScalarfileCopyDstFileName | read-write | current | The destination file name (including the path, if applicable) of the file. The accepted value of this object is 'cfg1' or 'cfg2' when the requested action is o… |
| 1.3.6.1.4.1.9.5.1.25.5 | ScalarfileCopyModuleNumber | read-write | current | The module number specified in the copy operation. If the value of this object is 0 and the fileCopyAction object has the value of copyImageFromHostToFlash(4),… |
| 1.3.6.1.4.1.9.5.1.25.6 | ScalarfileCopyUserName | read-write | current | Remote user name for copy via rcp protocol. This object must be specified when the fileCopyProtocol is rcp. |
| 1.3.6.1.4.1.9.5.1.25.7 | ScalarfileCopyAction | read-write | current | Setting this object to one of the acceptable values will initiate the requested action using the information provided by fileCopyProtocol, fileCopyRemoteServer… |
| 1.3.6.1.4.1.9.5.1.25.8 | ScalarfileCopyResult | read-only | current | Contains the result of the last copy action request. If the value of fileCopyResult is rcpError(22), then the detailed rcp error messages are contained in file… |
| 1.3.6.1.4.1.9.5.1.25.9 | ScalarfileCopyResultRcpErrorMessage | read-only | current | Contains the detailed rcp error messages if the value of fileCopyResult is rcpError(22) for the last copy action request; otherwise, this MIB object contains t… |
| 1.3.6.1.4.1.9.5.1.25.10 | ScalarfileCopyRuntimeConfigPart | read-write | current | Indicates the part of runtime configuration to be copied. This object will only take effect when the object value of fileCopyAction is one of the following: co… |
| 1.3.6.1.4.1.9.5.1.26 | NodevoiceGrp | |||
| 1.3.6.1.4.1.9.5.1.26.1 | TablevoicePortIfConfigTable | not-accessible | current | A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports with the voice port interface confi… |
| 1.3.6.1.4.1.9.5.1.26.1.1 | RowvoicePortIfConfigEntry | not-accessible | current | Entry containing voice interface configuration for a particular port. |
| 1.3.6.1.4.1.9.5.1.26.1.1.1 | ColumnvoicePortIfConfigModuleIndex | not-accessible | current | An index value that uniquely identifies the module where this port is located. |
| 1.3.6.1.4.1.9.5.1.26.1.1.2 | ColumnvoicePortIfConfigPortIndex | not-accessible | current | An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. |
| 1.3.6.1.4.1.9.5.1.26.1.1.3 | ColumnvoicePortIfDHCPEnabled | read-write | current | Indicate whether DHCP service is enabled. |
| 1.3.6.1.4.1.9.5.1.26.1.1.4 | ColumnvoicePortIfIpAddress | read-write | current | This port's IP address. This object is configurable only if voicePortIfDHCPEnabled is false. When the value of voicePortIfDHCPEnabled is false, this object sho… |
| 1.3.6.1.4.1.9.5.1.26.1.1.5 | ColumnvoicePortIfIpNetMask | read-write | current | This port's subnet mask. This object is configurable only if voicePortIfDHCPEnabled is false. When the value of voicePortIfDHCPEnabled is false, this object sh… |
| 1.3.6.1.4.1.9.5.1.26.1.1.6 | ColumnvoicePortIfTftpServerAddress | read-write | current | This port's TFTP Server address. This object is configurable only if voicePortIfDHCPEnabled is false. When the value of voicePortIfDHCPEnabled is false, this o… |
| 1.3.6.1.4.1.9.5.1.26.1.1.7 | ColumnvoicePortIfGatewayAddress | read-write | current | This port's router address. This object is configurable only if voicePortIfDHCPEnabled is false. |
| 1.3.6.1.4.1.9.5.1.26.1.1.8 | ColumnvoicePortIfDnsServerAddress | read-write | current | This port's DNS Server address. This object is configurable only if voicePortIfDHCPEnabled is false. |
| 1.3.6.1.4.1.9.5.1.26.1.1.9 | ColumnvoicePortIfDnsDomain | read-write | current | This port's DNS domain name. This object is configurable only if voicePortIfDHCPEnabled is false. |
| 1.3.6.1.4.1.9.5.1.26.1.1.10 | ColumnvoicePortIfOperDnsDomain | read-only | current | This port's operational DNS domain name. If voicePortIfDHCPEnabled is true, this object indicates the domain name taken from the DHCP server. If voicePortIfDHC… |
| 1.3.6.1.4.1.9.5.1.26.2 | TablevoicePortCallManagerTable | not-accessible | current | A list of call manager entries. The number of entries is determined by the number of modules in the chassis and the number of ports with the voice port interfa… |
| 1.3.6.1.4.1.9.5.1.26.2.1 | RowvoicePortCallManagerEntry | not-accessible | current | Entry containing voice interface configuration for a particular port. |
| 1.3.6.1.4.1.9.5.1.26.2.1.1 | ColumnvoicePortModuleIndex | not-accessible | current | An index value that uniquely identifies the module where this port is located. |
| 1.3.6.1.4.1.9.5.1.26.2.1.2 | ColumnvoicePortIndex | not-accessible | current | An index value that uniquely identifies this port within a module. |
| 1.3.6.1.4.1.9.5.1.26.2.1.3 | ColumnvoicePortCallManagerIndex | not-accessible | current | An index value that uniquely identifies this CallManager within a module/port. A port can register up to 5 CallManager. |
| 1.3.6.1.4.1.9.5.1.26.2.1.4 | ColumnvoicePortCallManagerIpAddr | read-only | current | The Call Manager IP Address of this port. A port can register up to 5 call managers. |
| 1.3.6.1.4.1.9.5.1.26.3 | TablevoicePortOperDnsServerTable | not-accessible | current | A list of operational DNS entries used by the voice ports. |
| 1.3.6.1.4.1.9.5.1.26.3.1 | RowvoicePortOperDnsServerEntry | not-accessible | current | Entry containing infomation on DNS servers may be used for a particular voice port. If DHCP is enabled on a port, the DNS server IP address will come from the … |
| 1.3.6.1.4.1.9.5.1.26.3.1.1 | ColumnvoicePortDnsModuleIndex | not-accessible | current | An index value that uniquely identifies the module where this port is located. |
| 1.3.6.1.4.1.9.5.1.26.3.1.2 | ColumnvoicePortDnsPortIndex | not-accessible | current | An index value that uniquely identifies this port within a module. |
| 1.3.6.1.4.1.9.5.1.26.3.1.3 | ColumnvoicePortOperDnsServerIndex | not-accessible | current | An index value that uniquely identifies this DNS server within a module/port. This value indicates the priority order among these DNS servers. |
| 1.3.6.1.4.1.9.5.1.26.3.1.4 | ColumnvoicePortOperDnsServerIpAddr | read-only | current | The operational DNS Server IP Address of this port. |
| 1.3.6.1.4.1.9.5.1.26.3.1.5 | ColumnvoicePortOperDnsServerSource | read-only | current | The source of the Dns Server IP Address of this port. fromDhcp(1) indicates that the DNS server IP address comes from the DHCP server. fromPortConfig(2) indica… |
| 1.3.6.1.4.1.9.5.1.27 | NodeportJumboFrameGrp | |||
| 1.3.6.1.4.1.9.5.1.27.1 | TableportJumboFrameTable | not-accessible | current | A list of port jumbo frame entries. The number of entries is determined by the number of ports in the system which support the Jumbo frame feature. |
| 1.3.6.1.4.1.9.5.1.27.1.1 | RowportJumboFrameEntry | not-accessible | current | Entry containing the jumbo frame configuration for a particular port. |
| 1.3.6.1.4.1.9.5.1.27.1.1.1 | ColumnportJumboFrameModuleIndex | read-only | current | An index value that uniquely identifies the module where this port is located. |
| 1.3.6.1.4.1.9.5.1.27.1.1.2 | ColumnportJumboFramePortIndex | read-only | current | An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to th… |
| 1.3.6.1.4.1.9.5.1.27.1.1.3 | ColumnportJumboFrameEnable | read-write | current | Indicates the jumbo frame status of the port. If enabled, the port supports frame size greater than the standard ethernet frame size of 1518 bytes. |
| 1.3.6.1.4.1.9.5.1.28 | NodeswitchAccelerationGrp | |||
| 1.3.6.1.4.1.9.5.1.28.1 | TableswitchAccelerationModuleTable | not-accessible | current | This table contains a list of the modules for which the switch acceleration capability can be configured. |
| 1.3.6.1.4.1.9.5.1.28.1.1 | RowswitchAccelerationModuleEntry | not-accessible | current | A module for which switch acceleration can be configured. |
| 1.3.6.1.4.1.9.5.1.28.1.1.1 | ColumnswitchAccelerationModuleIndex | read-only | current | The value of moduleIndex for the module where switch acceleration feature can be configured. |
| 1.3.6.1.4.1.9.5.1.28.1.1.2 | ColumnswitchAccelerationModuleEnable | read-write | current | Indicates whether switch acceleration is enabled on this module or not. When this feature is enabled, the system will increase the switching bandwidth, but the… |
| 1.3.6.1.4.1.9.5.1.29 | NodeconfigGrp | |||
| 1.3.6.1.4.1.9.5.1.29.1 | ScalarconfigMode | read-write | current | Configuration mode to store the configuration information. |
| 1.3.6.1.4.1.9.5.1.29.2 | ScalarconfigTextFileLocation | read-write | current | The location of the text configuration file which can be either NVRAM or a file in the FLASH file system. If the location is NVRAM, this object is a zero lengt… |
| 1.3.6.1.4.1.9.5.1.29.3 | ScalarconfigWriteMem | read-write | current | When this object is set to true(1), the current configuration is saved in text format in the location specified by configTextFileLocation. This object is only … |
| 1.3.6.1.4.1.9.5.1.29.4 | ScalarconfigWriteMemStatus | read-write | current | The status of the current or the most recently completed 'write memory' operation. The possible values are: inProgress - 'write' operation in progress; succeed… |
| 1.3.6.1.4.1.9.5.1.31 | NodeciscoStackMIBConformance | |||
| 1.3.6.1.4.1.9.5.1.31.1 | NodeciscoStackMIBCompliances | |||
| 1.3.6.1.4.1.9.5.1.31.1.1 | ComplianceciscoStackgMIBCompliance | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.2 | ComplianceciscoStackgMIBCompliance2 | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.3 | ComplianceciscoStackgMIBCompliance3 | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.4 | ComplianceciscoStackgMIBCompliance4 | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.5 | ComplianceciscoStackgMIBCompliance5 | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.6 | ComplianceciscoStackgMIBCompliance6 | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.7 | ComplianceciscoStackgMIBCompliance7 | deprecated | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.1.8 | ComplianceciscoStackgMIBCompliance8 | current | The compliance statement for entities which implement the Cisco stack MIB. | |
| 1.3.6.1.4.1.9.5.1.31.2 | NodeciscoStackMIBGroups | |||
| 1.3.6.1.4.1.9.5.1.31.2.1 | GroupsystemMiscGroup | deprecated | A collection of objects providing information about the miscellaneous system features. | |
| 1.3.6.1.4.1.9.5.1.31.2.2 | GroupsystemTrapGroup | deprecated | A collection of objects providing information about the SNMP traps feature. | |
| 1.3.6.1.4.1.9.5.1.31.2.3 | GroupchassisGroup | current | A collection of objects providing information about the chassis of the device. Implementation of this group is mandatory. | |
| 1.3.6.1.4.1.9.5.1.31.2.4 | GroupmoduleGroup | current | A collection of objects providing information about the modules on the device. Implementation of this group is mandatory. | |
| 1.3.6.1.4.1.9.5.1.31.2.5 | GroupportGroup | deprecated | A collection of objects providing information about the ports on the device. | |
| 1.3.6.1.4.1.9.5.1.31.2.6 | GroupoptionalSystemMiscGroup | current | A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.7 | GroupoptionalSystemTrapGroup | deprecated | A collection of objects providing information about the SNMP traps feature. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.8 | GroupoptionalChassisGroup | deprecated | A collection of objects providing information about the chassis of the device. | |
| 1.3.6.1.4.1.9.5.1.31.2.9 | GroupoptionalModuleGroup | current | A collection of objects providing information about the modules on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.10 | GroupoptionalPortGroup | deprecated | A collection of objects providing information about the ports on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.11 | GroupsystemTrafficGroup | current | A collection of objects providing information about the traffic meter feature. Implementation of this group is optional. If the traffic meter feature is suppor… | |
| 1.3.6.1.4.1.9.5.1.31.2.12 | GroupsystemFddiGroup | current | A collection of objects providing information about the FDDI ring feature. Implementation of this group is optional. If the FDDI ring feature is supported, the… | |
| 1.3.6.1.4.1.9.5.1.31.2.13 | GroupsystemRmonGroup | current | A collection of objects providing information about the extended RMON feature. Implementation of this group is optional. If the extended RMON feature is suppor… | |
| 1.3.6.1.4.1.9.5.1.31.2.14 | GroupauthenticationGroup | deprecated | A collection of objects providing information about the authentication features. Implementation of this group is optional. If the authentication features are s… | |
| 1.3.6.1.4.1.9.5.1.31.2.15 | GrouptftpGroup | current | A collection of objects providing information about the tftp upload/download features. Implementation of this group is optional. If the tftp upload/download fe… | |
| 1.3.6.1.4.1.9.5.1.31.2.16 | GroupbrouteEnableGroup | current | A collection of objects providing information about the combined bridging/routing feature. Implementation of this group is optional. If the combined bridging/r… | |
| 1.3.6.1.4.1.9.5.1.31.2.17 | GroupfilterGroup | current | A collection of objects providing information about the port filtering feature. Implementation of this group is optional. If the port filtering feature is supp… | |
| 1.3.6.1.4.1.9.5.1.31.2.18 | GroupmonitorGroup | deprecated | The collection of deprecated objects for managing the Switched Port Analyzer (SPAN) features. | |
| 1.3.6.1.4.1.9.5.1.31.2.19 | GroupvlanGroup | deprecated | A collection of objects providing information about the Virtual LAN features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.20 | GroupvmpsGroup | current | A collection of objects providing information about the Vlan Membership Policy Server feature. Implementation of this group is optional. If the Vlan Membership… | |
| 1.3.6.1.4.1.9.5.1.31.2.21 | GrouptokenRingGroup | current | A collection of objects providing information about the token ring features. Implementation of this group is optional. If the token ring features are supported… | |
| 1.3.6.1.4.1.9.5.1.31.2.22 | GroupmcastGroup | current | A collection of objects providing information about the multicast features. Implementation of this group is optional. If the multicast features are supported, … | |
| 1.3.6.1.4.1.9.5.1.31.2.23 | GroupdnsGroup | current | A collection of objects providing information about the DNS feature. Implementation of this group is optional. If the DNS feature is supported, the entire grou… | |
| 1.3.6.1.4.1.9.5.1.31.2.24 | GroupsyslogGroup | current | A collection of objects providing information about the system log feature. Implementation of this group is optional. If the system log feature is supported, t… | |
| 1.3.6.1.4.1.9.5.1.31.2.25 | GroupntpGroup | current | A collection of objects providing information about the network time protocol feature. Implementation of this group is optional. If the network time protocol f… | |
| 1.3.6.1.4.1.9.5.1.31.2.26 | GroupipPermitGroup | deprecated | A collection of objects providing information about the ip permit list feature. Implementation of this group is optional. If the ip permit list feature is supp… | |
| 1.3.6.1.4.1.9.5.1.31.2.27 | GroupmdgGatewayGroup | current | A collection of objects providing information about the multiple default gateway feature. Implementation of this group is optional. If the multiple default gat… | |
| 1.3.6.1.4.1.9.5.1.31.2.28 | GrouptraceRouteGroup | current | A collection of objects providing information about the trace route feature. Implementation of this group is optional. If the trace route feature is supported,… | |
| 1.3.6.1.4.1.9.5.1.31.2.29 | GroupdeprecatedObjectGroup | deprecated | A collection of objects that have been deprecated. | |
| 1.3.6.1.4.1.9.5.1.31.2.30 | GroupntpAuthenticationGroup | current | A collection of objects providing information about the network time protocol authentication feature. Implementation of this group is optional. If the network … | |
| 1.3.6.1.4.1.9.5.1.31.2.31 | GrouptokenRingSoftErrorMonitorGroup | current | A collection of objects providing information about the token ring port soft error monitoring feature. Implementation of this group is optional. If the token r… | |
| 1.3.6.1.4.1.9.5.1.31.2.32 | GroupportCpbGroup1 | current | A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.33 | GroupportSecurityGroup1 | current | A collection of objects providing additional information for supporting port security feature with the multiple secured source MAC addresses. Implementation of… | |
| 1.3.6.1.4.1.9.5.1.31.2.34 | GroupfileCopyGroup | current | A collection of objects providing information about the tftp/rcp or local file upload/download features. Implementation of this group is optional. If the tftp … | |
| 1.3.6.1.4.1.9.5.1.31.2.35 | GroupoptionalSystemMiscGroup1 | current | A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.36 | GroupipPermitGroup1 | current | A collection of objects providing additional information for allowing the ip permit host with the specified access type. Implementation of this group is option… | |
| 1.3.6.1.4.1.9.5.1.31.2.37 | GroupoptionalSystemMiscGroup2 | deprecated | A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.38 | GroupfilterGroup1 | current | A collection of objects providing information about the port filtering feature. Implementation of this group is optional. If the port filtering feature is supp… | |
| 1.3.6.1.4.1.9.5.1.31.2.39 | GroupmcastGroup1 | current | A collection of objects providing information about the multicast features. Implementation of this group is optional. If the multicast features are supported, … | |
| 1.3.6.1.4.1.9.5.1.31.2.40 | GroupportGroup1 | current | A collection of objects providing information about the ports on the device. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.41 | GroupchassisGroup1 | current | A collection of objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies. | |
| 1.3.6.1.4.1.9.5.1.31.2.42 | GroupmoduleGroup1 | current | A collection of objects providing information about the modules on the device. Implementation of this group is mandatory. | |
| 1.3.6.1.4.1.9.5.1.31.2.43 | GroupportCpbGroup2 | current | A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.44 | GroupvoiceGroup | current | A collection of objects providing information about the voice ports on the device. Implemetation of this group is Optional | |
| 1.3.6.1.4.1.9.5.1.31.2.45 | GroupportGroup2 | current | A collection of objects providing information about the ports on the device. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.46 | GroupvlanGroup1 | deprecated | A collection of objects providing information about the Virtual LAN features. Implementation of this group is optional. If the Virtual LAN features are support… | |
| 1.3.6.1.4.1.9.5.1.31.2.47 | GroupportCpbGroup3 | current | A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.48 | GroupmoduleGroup2 | current | A collection of objects providing information about the modules on the device. Implementation of this group is mandatory. | |
| 1.3.6.1.4.1.9.5.1.31.2.49 | GroupswitchAccelerationModuleGroup | current | A collection of objects providing information about the modules switch acceleration configuration. Implementation of this group is mandatory if the module swit… | |
| 1.3.6.1.4.1.9.5.1.31.2.50 | GroupoptionalSystemMiscGroup3 | current | A collection of objects providing information about the miscellaneous system features. The sysExtendedRmonNetflowModuleMask object is optional object and it wi… | |
| 1.3.6.1.4.1.9.5.1.31.2.51 | GroupoptionalSystemMiscGroup4 | current | A collection of objects providing information about the miscellaneous system features. | |
| 1.3.6.1.4.1.9.5.1.31.2.52 | GroupvlanTrunkMappingGroup | current | A collection of objects providing information about the trunk VLAN to VLAN associations. Implementation of this group is mandatory if the trunk VLAN to VLAN as… | |
| 1.3.6.1.4.1.9.5.1.31.2.53 | GroupportJumboFrameGroup | current | A collection of objects providing information about the port jumbo frame feature on the device. Implementation of this group is mandatory if the port jumbo fra… | |
| 1.3.6.1.4.1.9.5.1.31.2.54 | GroupportCpbGroup4 | current | A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.55 | GroupfileCopyGroup2 | current | A collection of objects providing additional information about tftp/rcp or local file upload/download features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.56 | GroupsystemRmonGroup2 | current | A collection of object providing RMON max memory usage control. | |
| 1.3.6.1.4.1.9.5.1.31.2.57 | GroupfilterGroup2 | current | A collection of objects providing information about the unicast/multicast port filtering feature. | |
| 1.3.6.1.4.1.9.5.1.31.2.58 | GroupoptionalSystemMiscGroup5 | current | A collection of objects providing information about the miscellaneous system features. | |
| 1.3.6.1.4.1.9.5.1.31.2.59 | GroupsyslogGroup2 | current | A collection of object providing control about whether the syslog messages should be sent to telnet sessions. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.60 | GroupsystemStatusGroup | current | A collection of object providing the system LED status. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.61 | GroupconfigurationGroup | current | A collection of object providing the information about the configuration mode to store the configuration information. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.62 | GroupfilterGroup3 | current | A collection of objects providing additional information about about the Broadcast Suppression Violation for port filtering feature. Implementation of this gro… | |
| 1.3.6.1.4.1.9.5.1.31.2.63 | GroupportGroup3 | current | A collection of objects providing additional information about the ports on the device. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.64 | GroupportCpbGroup5 | current | A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.65 | GroupauthenticationGroup1 | deprecated | A collection of objects providing information about the authentication features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.66 | GroupsystemMiscGroup1 | current | A collection of objects providing information about the miscellaneous system features. | |
| 1.3.6.1.4.1.9.5.1.31.2.67 | GroupsystemTrapGroup1 | deprecated | A collection of objects providing information about the SNMP traps feature. | |
| 1.3.6.1.4.1.9.5.1.31.2.68 | GroupoptionalSystemMiscGroup6 | current | A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.69 | GroupoptionalChassisGroup1 | current | A collection of objects providing information about the chassis of the device. | |
| 1.3.6.1.4.1.9.5.1.31.2.70 | GroupportGroup4 | current | A collection of objects providing information about the ports on the device. | |
| 1.3.6.1.4.1.9.5.1.31.2.71 | GroupvlanGroup2 | current | A collection of objects providing information about the Virtual LAN features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.72 | GroupipPermitGroup2 | current | A collection of objects providing information about the ip permit list feature. Implementation of this group is optional. If the ip permit list feature is supp… | |
| 1.3.6.1.4.1.9.5.1.31.2.73 | GroupoptionalPortGroup1 | current | A collection of objects providing information about the ports on the device. Implementation of this group is Optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.74 | GroupoptionalSystemTrapGroup1 | current | A collection of objects providing information about the SNMP traps feature. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.75 | GroupauthenticationGroup2 | current | A collection of objects providing information about the authentication features. Implementation of this group is optional. | |
| 1.3.6.1.4.1.9.5.1.31.2.76 | GroupsystemTrapGroup2 | current | A collection of objects providing information about the SNMP traps feature. | |
| 1.3.6.1.4.1.9.5.1.31.2.77 | GroupnotificationGroup | current | A collection of notifications supported on the device. | |
| 1.3.6.1.4.1.9.5.1.31.2.78 | GroupipPermitGroup3 | current | A collection of objects providing configuration information on ip permit connection limit for a specific host. | |
| 1.3.6.1.4.1.9.5.2 | NodeadapterCard | |||
| 1.3.6.1.4.1.9.5.3 | Nodewsc1000sysID | |||
| 1.3.6.1.4.1.9.5.4 | Nodewsc1100sysID | |||
| 1.3.6.1.4.1.9.5.5 | Nodewsc1200sysID | |||
| 1.3.6.1.4.1.9.5.6 | Nodewsc1400sysID | |||
| 1.3.6.1.4.1.9.5.7 | Nodewsc5000sysID | |||
| 1.3.6.1.4.1.9.5.8 | Nodewsc1600sysID | |||
| 1.3.6.1.4.1.9.5.9 | Nodecpw1600sysID | |||
| 1.3.6.1.4.1.9.5.10 | Nodewsc3000sysID | |||
| 1.3.6.1.4.1.9.5.12 | Nodewsc2900sysID | |||
| 1.3.6.1.4.1.9.5.13 | Nodecpw2200sysID | |||
| 1.3.6.1.4.1.9.5.14 | NodeesStack | |||
| 1.3.6.1.4.1.9.5.15 | Nodewsc3200sysID | |||
| 1.3.6.1.4.1.9.5.16 | Nodecpw1900sysID | |||
| 1.3.6.1.4.1.9.5.17 | Nodewsc5500sysID | |||
| 1.3.6.1.4.1.9.5.18 | Nodewsc1900sysID | |||
| 1.3.6.1.4.1.9.5.19 | Nodecpw1220sysID | |||
| 1.3.6.1.4.1.9.5.20 | Nodewsc2820sysID | |||
| 1.3.6.1.4.1.9.5.21 | Nodecpw1420sysID | |||
| 1.3.6.1.4.1.9.5.22 | Nodedcd | |||
| 1.3.6.1.4.1.9.5.23 | Nodewsc3100sysID | |||
| 1.3.6.1.4.1.9.5.24 | Nodecpw1800sysID | |||
| 1.3.6.1.4.1.9.5.25 | Nodecpw1601sysID | |||
| 1.3.6.1.4.1.9.5.26 | Nodewsc3001sysID | |||
| 1.3.6.1.4.1.9.5.27 | Nodecpw1220csysID | |||
| 1.3.6.1.4.1.9.5.28 | Nodewsc1900csysID | |||
| 1.3.6.1.4.1.9.5.29 | Nodewsc5002sysID | |||
| 1.3.6.1.4.1.9.5.30 | Nodecpw1220isysID | |||
| 1.3.6.1.4.1.9.5.31 | Nodewsc1900isysID | |||
| 1.3.6.1.4.1.9.5.32 | NodetsStack | |||
| 1.3.6.1.4.1.9.5.33 | Nodewsc3900sysID | |||
| 1.3.6.1.4.1.9.5.34 | Nodewsc5505sysID | |||
| 1.3.6.1.4.1.9.5.35 | Nodewsc2926sysID | |||
| 1.3.6.1.4.1.9.5.36 | Nodewsc5509sysID | |||
| 1.3.6.1.4.1.9.5.37 | Nodewsc3920sysID | |||
| 1.3.6.1.4.1.9.5.38 | Nodewsc6006sysID | |||
| 1.3.6.1.4.1.9.5.39 | Nodewsc6009sysID | |||
| 1.3.6.1.4.1.9.5.40 | Nodewsc4003sysID | |||
| 1.3.6.1.4.1.9.5.41 | Nodewsc4912gsysID | |||
| 1.3.6.1.4.1.9.5.42 | Nodewsc2948gsysID | |||
| 1.3.6.1.4.1.9.5.44 | Nodewsc6509sysID | |||
| 1.3.6.1.4.1.9.5.45 | Nodewsc6506sysID | |||
| 1.3.6.1.4.1.9.5.46 | Nodewsc4006sysID | |||
| 1.3.6.1.4.1.9.5.47 | Nodewsc6509nebsysID | |||
| 1.3.6.1.4.1.9.5.48 | Nodewsc6knamsysID | |||
| 1.3.6.1.4.1.9.5.49 | Nodewsc2980gsysID | |||
| 1.3.6.1.4.1.9.5.50 | Nodewsc6513sysID | |||
| 1.3.6.1.4.1.9.5.51 | Nodewsc2980gasysID | |||
| 1.3.6.1.4.1.9.5.53 | Nodecisco7603sysID | |||
| 1.3.6.1.4.1.9.5.54 | Nodecisco7606sysID | |||
| 1.3.6.1.4.1.9.5.55 | Nodecisco7609sysID | |||
| 1.3.6.1.4.1.9.5.56 | Nodewsc6503sysID | |||
| 1.3.6.1.4.1.9.5.58 | Nodewsc4503sysID | |||
| 1.3.6.1.4.1.9.5.59 | Nodewsc4506sysID | |||
| 1.3.6.1.4.1.9.5.60 | Nodecisco7613sysID | |||
| 1.3.6.1.4.1.9.5.61 | Nodewsc6509nebasysID | |||
| 1.3.6.1.4.1.9.5.62 | Nodewsc2948ggetxsysID | |||
| 1.3.6.1.4.1.9.5.63 | Nodecisco7604sysID | |||
| 1.3.6.1.4.1.9.5.64 | Nodewsc6504esysID | |||
| 1.3.6.1.4.1.9.5.175 | Nodewsc1900LiteFxsysID |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VendorIdType | OCTET STRING (SIZE (3)) | current | Vendor ID Type |