MIB Viewer

CISCO-SWITCH-MULTICAST-MIB

99 objects
This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of the terms used in this MIB: Multicast Replication - The mechanism by which a system creates one or more copies of a multicast packet for forwarding. Ingress Multicast Replication - A type of multicast replication where the replication engine on the ingress module always performs the whole replication. Egress Multicast Replication - A type of multicast replication where the replication engines on both the ingress and egress modules perform the replication. VPN - Virtual private network. A secure IP-based network that shares resources with one or more physical networks. VRF - VPN Routing and Forwarding instance Consists of an IP routing table, a derived forwarding table, a set of interfaces that use the forwarding table, and a set of rules and routing protocols that determine what goes into the forwarding table. MVPN - Multicast VPN MVRF - Multicast VRF A VRF which has multicast routing enabled. VRF-lite - A feature that enables a service provider to support two or more VPNs, where IP addresses can be overlapped among the VPNs. LTL - Local Target Logic A hardware resource table to aid in switching. OIF - Outgoing Interface The interface through which packets are forwarded out. DF - Designated Forwarder.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.504IdentityciscoSwitchMulticastMIBThis MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of the terms used in this MIB: M…
1.3.6.1.4.1.9.9.504.0NodecswmMIBNotifs
1.3.6.1.4.1.9.9.504.1NodecswmMIBObjects
1.3.6.1.4.1.9.9.504.1.1NodecswmGlobal
1.3.6.1.4.1.9.9.504.1.1.1ScalarcswmMvpnHwSwitchingStatusread-onlycurrentIndicates the MVPN hardware switching status. 'notCapable' - This device is not capable of MVPN hardware switching 'enable' - MVPN hardware switching is enable…
1.3.6.1.4.1.9.9.504.1.1.2ScalarcswmVrfLiteStatusread-onlycurrentIndicates the VRF-Lite switching status. 'notCapable' - This device is not capable of VRF-Lite switching. 'enable' - VRF-Lite switching is enabled. 'disable' -…
1.3.6.1.4.1.9.9.504.1.1.3ScalarcswmMRouteConsistCheckread-writecurrentSpecifies the Multicast Routing(mroute) Table consistency checker support mode. The consistency checker scans the mroute table and assures that multicast-hardw…
1.3.6.1.4.1.9.9.504.1.1.4ScalarcswmProcessorConsistCheckread-writecurrentSpecifies the Processor consistency checker support mode. In a multiple processor device, the consistency checker assures that multicast flow entries are consi…
1.3.6.1.4.1.9.9.504.1.2NodecswmReplication
1.3.6.1.4.1.9.9.504.1.2.1TablecswmReplCapabilityTablenot-accessiblecurrentA table containing multicast replication capability information.
1.3.6.1.4.1.9.9.504.1.2.1.1RowcswmReplCapabilityEntrynot-accessiblecurrentA conceptual row of cswmReplCapabilityTable, containing the multicast replication capability information for per module (identified by entPhysicalIndex) per In…
1.3.6.1.4.1.9.9.504.1.2.1.1.1ColumncswmReplCapabilityread-onlycurrentIndicates the multicast replication capability. The replication capability of a module for a particular address type is dependent on the hardware and software …
1.3.6.1.4.1.9.9.504.1.2.2TablecswmReplConfigTablenot-accessiblecurrentA table containing multicast flow replication information for the device.
1.3.6.1.4.1.9.9.504.1.2.2.1RowcswmReplConfigEntrynot-accessiblecurrentA conceptual row of cswmReplConfigTable, containing multicast flow replication information.
1.3.6.1.4.1.9.9.504.1.2.2.1.1ColumncswmReplConfigAddrTypenot-accessiblecurrentThe Internet address type supporting multicast flow replication.
1.3.6.1.4.1.9.9.504.1.2.2.1.2ColumncswmReplConfigCurModeread-writecurrentSpecifies the current mode of multicast flow replication for this address type. 'notCapable' - This device is not capable of Multicast flow replication for thi…
1.3.6.1.4.1.9.9.504.1.2.2.1.3ColumncswmReplConfigAutoDetectread-writecurrentSpecifies the auto-detection of multicast replication mode for this address type. 'notCapable' - This device is not capable of Auto-detection of multicast repl…
1.3.6.1.4.1.9.9.504.1.2.3ScalarcswmGlobalReplcationModeread-writecurrentSpecifies the current mode of multicast flow replication for all Internet address types supporting multicast flow replication. 'notCapable' - This device is no…
1.3.6.1.4.1.9.9.504.1.3NodecswmMvrfStats
1.3.6.1.4.1.9.9.504.1.3.1TablecswmMvrfStatsTablenot-accessiblecurrentA table containing multicast flow statistics information on each Multicast VPN routing/forwarding instance (MVRF).
1.3.6.1.4.1.9.9.504.1.3.1.1RowcswmMvrfStatsEntrynot-accessiblecurrentA conceptual row of cswmMvrfStatsTable, containing multicast flow statistics for each MVRF.
1.3.6.1.4.1.9.9.504.1.3.1.1.1ColumncswmMvrfNamenot-accessiblecurrentThe human-readable name of this VPN.
1.3.6.1.4.1.9.9.504.1.3.1.1.2ColumncswmMvrfTotalFlowsread-onlycurrentIndicates the total number of multicast flow entries installed for this MVRF.
1.3.6.1.4.1.9.9.504.1.3.1.1.3ColumncswmMvrfPartialFlowsread-onlycurrentIndicates the total number of multicast partial short cut flow entries installed for this MVRF.
1.3.6.1.4.1.9.9.504.1.3.1.1.4ColumncswmMvrfRpfMfdFlowsread-onlycurrentIndicates the total number of Reverse Path Forwarding(RPF) Multicast Fast Drop(MFD) flow entries installed for this MVRF.
1.3.6.1.4.1.9.9.504.1.4NodecswmBiDirPimDfStats
1.3.6.1.4.1.9.9.504.1.4.1ScalarcswmBiDirPimDfUsedread-onlycurrentThe number of Bi-directional PIM Designated Forwarder entries currently in use by the default MVRF on the device.
1.3.6.1.4.1.9.9.504.1.4.2ScalarcswmBiDirPimDfTotalread-onlycurrentThe total number of Bi-directional PIM Designated Forwarder entries for the default MVRF on the device.
1.3.6.1.4.1.9.9.504.1.4.3TablecswmMvrfBiDirPimDfUsageTablenot-accessiblecurrentA table containing multicast Bi-directional PIM Designated Forwarder usage information on each Multicast VPN routing/forwarding instance (MVRF) for every Inter…
1.3.6.1.4.1.9.9.504.1.4.3.1RowcswmMvrfBiDirPimDfUsageEntrynot-accessiblecurrentA conceptual row of cswmMvrfBiDirPimDfUsageTable, containing multicast Bi-directional PIM Designated Forwarder usage information on each MVRF per Internet addr…
1.3.6.1.4.1.9.9.504.1.4.3.1.1ColumncswmMvrfBiDirPimDfAddrTypenot-accessiblecurrentThis object indicates the internet address type for which the multicast Bi-directional PIM Designated Forwarder usage information is collected.
1.3.6.1.4.1.9.9.504.1.4.3.1.2ColumncswmMvrfBiDirPimDfUsedread-onlycurrentThe number of Bi-directional PIM Designated Forwarder entries currently in use.
1.3.6.1.4.1.9.9.504.1.4.3.1.3ColumncswmMvrfBiDirPimDfTotalread-onlycurrentThe total number of Bi-directional PIM Designated Forwarder entries.
1.3.6.1.4.1.9.9.504.1.5NodecswmLtlStats
1.3.6.1.4.1.9.9.504.1.5.1ScalarcswmLtlUsedread-onlycurrentThis object indicates the number of Multicast LTL entries currently used by this device.
1.3.6.1.4.1.9.9.504.1.5.2ScalarcswmLtlTotalread-onlycurrentThis object indicates the total number of Multicast LTL entries available for this device.
1.3.6.1.4.1.9.9.504.1.6NodecswmForwarding
1.3.6.1.4.1.9.9.504.1.6.1TablecswmForwardingTablenot-accessiblecurrentA table containing multicast forwarding information.
1.3.6.1.4.1.9.9.504.1.6.1.1RowcswmForwardingEntrynot-accessiblecurrentA conceptual row of cswmForwardingTable, containing multicast forwarding information on a particular interface for every Internet address type supported.
1.3.6.1.4.1.9.9.504.1.6.1.1.1ColumncswmInterfaceIndexnot-accessiblecurrentThis object specifies the ifIndex for interface capable of performing forwarding.
1.3.6.1.4.1.9.9.504.1.6.1.1.2ColumncswmForwardingAddrTypenot-accessiblecurrentThis object specifies the internet address type of the multicast forwarding.
1.3.6.1.4.1.9.9.504.1.6.1.1.3ColumncswmForwardingEnabledread-writecurrentThis object specifies whether multicast forwarding is supported on this interface for a particular internet address type. 'notCapable' - A read-only value whic…
1.3.6.1.4.1.9.9.504.1.7NodecswmFlowQueryResult
1.3.6.1.4.1.9.9.504.1.7.1ScalarcswmFlowMaxQueriesread-onlycurrentMaximum number of query entries allowed to be outstanding at any time, in the cswmFlowQueryTable. The typical value for this object is 5.
1.3.6.1.4.1.9.9.504.1.7.2TablecswmFlowQueryTablenot-accessiblecurrentA control table used to query the switching engine by specifying retrieval criteria for IP multicast L3 flows. Each row instance in the table represents a quer…
1.3.6.1.4.1.9.9.504.1.7.2.1RowcswmFlowQueryEntrynot-accessiblecurrentA conceptual row of the cswmFlowQueryTable used to setup retrieval criteria to search for IP multicast L3 flows on a switching engine entity in the device.
1.3.6.1.4.1.9.9.504.1.7.2.1.1ColumncswmFlowQueryIndexnot-accessiblecurrentAn arbitrary integer in the range of 1 to cswmFlowMaxQueries to identify this control query.
1.3.6.1.4.1.9.9.504.1.7.2.1.2ColumncswmFlowQueryMaskread-createcurrentThis object is used to set up the query criteria for the multicast flows of interest. If any one of the defined BITs is set, then the objects(s) corresponding …
1.3.6.1.4.1.9.9.504.1.7.2.1.3ColumncswmFlowQueryMvrfread-createcurrentThe human-readable name of the Multicast Virtual Private Network (MVPN) routing/forwarding instance (MVRF). When the 'mvrf' bit of cswmFlowQueryMask object in …
1.3.6.1.4.1.9.9.504.1.7.2.1.4ColumncswmFlowQueryAddrTyperead-createcurrentThe Internet address type for this multicast search query.
1.3.6.1.4.1.9.9.504.1.7.2.1.5ColumncswmFlowQuerySourceread-createcurrentThe source Internet address of the IP multicast layer 3 flows. When the 'source' BIT of cswmFlowQueryMask object in the same row is on, an appropriate value sh…
1.3.6.1.4.1.9.9.504.1.7.2.1.6ColumncswmFlowQueryGroupread-createcurrentThe multicast group Internet address of the queried flows. When the 'group' or 'groupmask' bit of cswmFlowQueryMask object in the same row is on, an appropriat…
1.3.6.1.4.1.9.9.504.1.7.2.1.7ColumncswmFlowQueryGroupMaskread-createcurrentThe length of the Prefix associated with cswmFlowQueryGroup. When the 'groupmask' bit of cswmFlowQueryMask object in the same row is on, an appropriate value s…
1.3.6.1.4.1.9.9.504.1.7.2.1.8ColumncswmFlowQueryTyperead-createcurrentThis object is used to set up the query type for the multicast flows of interest. If the 'perFlow' BIT is set, then, the entries matching this query will be re…
1.3.6.1.4.1.9.9.504.1.7.2.1.9ColumncswmFlowQueryEntityIndexread-createcurrentThis object identifies the switching engine for which the query is issued. When the value of this object is 0, the query is performed on the switching engine o…
1.3.6.1.4.1.9.9.504.1.7.2.1.10ColumncswmFlowQuerySkipNFlowsread-createcurrentThe number of searched flows to be skipped before storing any multicast flows in cswmFlowResultTable, when the 'perFlow' bit is set in cswmFlowQueryType. This …
1.3.6.1.4.1.9.9.504.1.7.2.1.11ColumncswmFlowQueryTotalFlowsread-onlycurrentThe number of flows matching the query criteria. The value of this object will be zero when the 'perFlow' bit is set in cswmFlowQueryType.
1.3.6.1.4.1.9.9.504.1.7.2.1.12ColumncswmFlowMcastQueryRowsread-onlycurrentIndicating the status of the query by following values: -1 - Either the query has not been started or the agent is still processing this query instance. It is …
1.3.6.1.4.1.9.9.504.1.7.2.1.13ColumncswmFlowMcastQueryMoreRowsread-onlycurrentIf the value of the object is true when there are more entries available matching this query criteria, than the ones returned in cswmFlowResultTable.
1.3.6.1.4.1.9.9.504.1.7.2.1.14ColumncswmFlowQueryOwnerread-createcurrentThe manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an administratively assigned name of the…
1.3.6.1.4.1.9.9.504.1.7.2.1.15ColumncswmFlowQueryCreateTimeread-onlycurrentTime when this query was created.
1.3.6.1.4.1.9.9.504.1.7.2.1.16ColumncswmFlowQueryStorageread-createcurrentThe storage type for this conceptual row.
1.3.6.1.4.1.9.9.504.1.7.2.1.17ColumncswmFlowQueryStatusread-createcurrentThe status object used to manage rows in this table. When set to 'active', the query to search for l3 multicast flows is initiated. Once a row becomes active, …
1.3.6.1.4.1.9.9.504.1.7.3TablecswmFlowResultTablenot-accessiblecurrentA table containing current IP multicast flow information corresponding to all the completed queries set up in the cswmFlowQueryTable, that were initiated on th…
1.3.6.1.4.1.9.9.504.1.7.3.1RowcswmFlowResultEntrynot-accessiblecurrentA conceptual row of cswmFlowResultTable, containing information about an IP multicast layer 3 flow that matchs the search criteria set in the corresponding row…
1.3.6.1.4.1.9.9.504.1.7.3.1.1ColumncswmFlowResultIndexnot-accessiblecurrentA positive integer which uniquely identify a result entry matching a particular query.
1.3.6.1.4.1.9.9.504.1.7.3.1.2ColumncswmFlowResultMvrfread-onlycurrentThe MVRF to which this flow belongs to.
1.3.6.1.4.1.9.9.504.1.7.3.1.3ColumncswmFlowResultAddrTyperead-onlycurrentThe Internet address type of cswmFlowResultGroup, cswmFlowResultGroupMask and cswmFlowResultSource.
1.3.6.1.4.1.9.9.504.1.7.3.1.4ColumncswmFlowResultGroupread-onlycurrentThe group address of the multicast layer 3 flow.
1.3.6.1.4.1.9.9.504.1.7.3.1.5ColumncswmFlowResultGroupMaskread-onlycurrentThe length of the Prefix associated with cswmFlowResultGroup. A value of zero causes all addresses to match. This prefix length will be consistent with the typ…
1.3.6.1.4.1.9.9.504.1.7.3.1.6ColumncswmFlowResultSourceread-onlycurrentThe source address of the multicast layer 3 flow.
1.3.6.1.4.1.9.9.504.1.7.3.1.7ColumncswmFlowResultFlagsread-onlycurrentThis object indicates the corresponding flags for this flow: 'copy' - indicates that traffic is copied to CPU and forwarded in hardware. 'punt' - indicates tha…
1.3.6.1.4.1.9.9.504.1.7.3.1.8ColumncswmFlowResultRpfInterfaceread-onlycurrentThis object represents either the InterfaceIndex of RPF interface for a RPF flow or 0 (zero). The value of zero means that this flow is a non-RPF flow.
1.3.6.1.4.1.9.9.504.1.7.3.1.11ColumncswmFlowResultPacketsread-onlycurrentThe total number of multicast traffic packets forwarded for this flow.
1.3.6.1.4.1.9.9.504.1.7.3.1.12ColumncswmFlowResultOctetsread-onlycurrentThe total number of multicast traffic octets forwarded for this flow.
1.3.6.1.4.1.9.9.504.1.7.4TablecswmFlowResultOIFTablenot-accessiblecurrentA table containing list of OIF for a flow listed in cswmFlowResultTable.
1.3.6.1.4.1.9.9.504.1.7.4.1RowcswmFlowResultOIFEntrynot-accessiblecurrentA conceptual row of cswmFlowResultOIFTable, containing information about the list of OIF for a flow listed in cswmFlowResultTable. An entry is created only whe…
1.3.6.1.4.1.9.9.504.1.7.4.1.1ColumncswmFlowResultOIFIndexnot-accessiblecurrentA positive integer which uniquely identifies a list of OIF for a particular result flow matching a particular query.
1.3.6.1.4.1.9.9.504.1.7.4.1.2ColumncswmFlowResultOIFIntListread-onlycurrentThe object lists the ifIndex for a set of 64 OIF for a particular flow.
1.3.6.1.4.1.9.9.504.1.7.5TablecswmFlowResultDFTablenot-accessiblecurrentA table containing list of DF interfaces for a flow listed in cswmFlowResultTable.
1.3.6.1.4.1.9.9.504.1.7.5.1RowcswmFlowResultDFEntrynot-accessiblecurrentA conceptual row of cswmFlowResultDFTable, containing information about the list of DF Interfaces for a flow listed in cswmFlowResultTable. An entry is created…
1.3.6.1.4.1.9.9.504.1.7.5.1.1ColumncswmFlowResultDFIndexnot-accessiblecurrentA positive integer which uniquely identifies a list of DF interfaces for a particular flow matching a particular query.
1.3.6.1.4.1.9.9.504.1.7.5.1.2ColumncswmFlowResultDFIntListread-onlycurrentThe object lists the ifIndex for a set of 64 DF interfaces for a particular flow.
1.3.6.1.4.1.9.9.504.2NodecswmMIBConform
1.3.6.1.4.1.9.9.504.2.1NodecswmMIBCompliances
1.3.6.1.4.1.9.9.504.2.1.1CompliancecswmMIBCompliancedeprecatedThe compliance statement for the CISCO-SWITCH-MULTICAST-MIB. OBJECT cswmReplConfigAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION An implement…
1.3.6.1.4.1.9.9.504.2.1.2CompliancecswmMIBCompliance2deprecatedThe compliance statement for the CISCO-SWITCH-MULTICAST-MIB. OBJECT cswmReplConfigAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION An implement…
1.3.6.1.4.1.9.9.504.2.1.3CompliancecswmMIBCompliance3read-onlycurrentThe compliance statement for the CISCO-SWITCH-MULTICAST-MIB. OBJECT cswmReplConfigAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION An implement…
1.3.6.1.4.1.9.9.504.2.2NodecswmMIBGroups
1.3.6.1.4.1.9.9.504.2.2.1GroupcswmGlobalGroupcurrentA collection of objects providing global multicast information and configuration.
1.3.6.1.4.1.9.9.504.2.2.2GroupcswmConsistCheckGroupcurrentA collection of objects providing multicast consitency check information and configuration.
1.3.6.1.4.1.9.9.504.2.2.3GroupcswmReplicationGroupcurrentA collection of objects providing multicast replication information and configuration.
1.3.6.1.4.1.9.9.504.2.2.4GroupcswmMvrfStatsGroupcurrentA collection of objects providing MVRF statistics.
1.3.6.1.4.1.9.9.504.2.2.5GroupcswmBiDirPimDfUsageGroupcurrentA collection of objects providing Bi-directional PIM Designated Forwarder database Usage information.
1.3.6.1.4.1.9.9.504.2.2.6GroupcswmLtlUsageGroupcurrentA collection of objects providing Multicast LTL usage information.
1.3.6.1.4.1.9.9.504.2.2.7GroupcswmGlobalReplicationGroupcurrentA collection of objects providing multicast global replication information and configuration.
1.3.6.1.4.1.9.9.504.2.2.8GroupcswmMvrfBiDirPimDfUsageGroupcurrentA collection of objects providing Bi-directional PIM Designated Forwarder database Usage information for each MVRF available on the device.
1.3.6.1.4.1.9.9.504.2.2.9GroupcswmForwardingGroupcurrentA collection of objects providing multicast forwarding information and configuration.
1.3.6.1.4.1.9.9.504.2.2.10GroupcswmFlowQueryResultGroupcurrentA collection of objects for querying l3 multicast flows.