CISCO-SYSTEM-EXT-MIB
100 objects
MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on core files that are generated in the system. GLOSSARY FIPS Federal Information Processing Standards Publication.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | EntPhysicalIndexOrZero TimeIntervalSec |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.305 | IdentityciscoSystemExtMIB | MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on core files that are generated in … | ||
| 1.3.6.1.4.1.9.9.305.0 | NodeciscoSystemExtMIBNotifsPrefix | |||
| 1.3.6.1.4.1.9.9.305.1 | NodeciscoSystemExtMIBObjects | |||
| 1.3.6.1.4.1.9.9.305.1.1 | NodeciscoSysInfoGroup | |||
| 1.3.6.1.4.1.9.9.305.1.1.1 | ScalarcseSysCPUUtilization | read-only | current | The average utilization of CPU on the active supervisor. |
| 1.3.6.1.4.1.9.9.305.1.1.2 | ScalarcseSysMemoryUtilization | read-only | current | The average utilization of memory on the active supervisor. |
| 1.3.6.1.4.1.9.9.305.1.1.3 | ScalarcseSysConfLastChange | read-only | current | The local date and time when the configuration was last changed. This object will be set to zero on power cycle or on reboot of the system. Also, if the clock … |
| 1.3.6.1.4.1.9.9.305.1.1.4 | ScalarcseSysAutoSync | read-write | current | The state of the auto synchronization of images between the active and standby supervisor. Setting the value to sync when the existing value is sync, has no ef… |
| 1.3.6.1.4.1.9.9.305.1.1.5 | ScalarcseSysAutoSyncState | read-only | current | The status of the current auto synchronization process, or if no such process is in progress, then the state of the most recent one. The value 'notStarted' ind… |
| 1.3.6.1.4.1.9.9.305.1.1.6 | ScalarcseWriteErase | read-write | current | This object is used to initiate a write erase on the device's saved configuration file(s) from which the device loads its configuration when it restarts. If th… |
| 1.3.6.1.4.1.9.9.305.1.1.7 | ScalarcseSysConsolePortStatus | read-only | current | This object describes the status of the console port on this device. The status 'connected' means that there is a cable attached to the console port. The statu… |
| 1.3.6.1.4.1.9.9.305.1.1.8 | ScalarcseSysTelnetServiceActivation | read-write | current | Enables or disables the Telnet service on the device. In other words, it enables or disables the telneting to the device. |
| 1.3.6.1.4.1.9.9.305.1.1.9 | ScalarcseSysFIPSModeActivation | read-write | current | The object to enable/disable FIPS mode on the device. FIPS 140-2 is a set of security requirements for cryptographic modules and it details the U.S. Government… |
| 1.3.6.1.4.1.9.9.305.1.1.10 | ScalarcseSysUpTime | read-only | current | The time (in seconds) since the entire system was last re-initialized as a result of reload. The initialization being system loaded and running with a system i… |
| 1.3.6.1.4.1.9.9.305.1.2 | NodeciscoSysErrorGroup | |||
| 1.3.6.1.4.1.9.9.305.1.2.1 | TablecseSnmpErrorTable | not-accessible | current | A table containing information about the errors which have recently caused the generation of a SNMP Response PDU with a non-zero value in its error-status fiel… |
| 1.3.6.1.4.1.9.9.305.1.2.1.1 | RowcseSnmpErrorEntry | not-accessible | current | An entry (conceptual row) in the cseSnmpErrorTable, containing information about an error which has recently caused a SNMP SetRequest to fail. An entry is crea… |
| 1.3.6.1.4.1.9.9.305.1.2.1.1.1 | ColumncseSnmpErrorAddressType | not-accessible | current | The type of address from which the error-ed SetRequest originated. |
| 1.3.6.1.4.1.9.9.305.1.2.1.1.2 | ColumncseSnmpErrorAddress | not-accessible | current | The address from which the error-ed SetRequest originated. |
| 1.3.6.1.4.1.9.9.305.1.2.1.1.3 | ColumncseSnmpErrorRequestId | not-accessible | current | The request-id of the error-ed SetRequest. |
| 1.3.6.1.4.1.9.9.305.1.2.1.1.4 | ColumncseSnmpErrorCode | read-only | current | The code for the Mib object specific error which caused a SetRequest to fail. This error code is platform-specific and for debugging purposes only. For informa… |
| 1.3.6.1.4.1.9.9.305.1.2.1.1.5 | ColumncseSnmpErrorDescription | read-only | current | The error description for the error happened for the SetRequest. |
| 1.3.6.1.4.1.9.9.305.1.3 | NodeciscoHaGroup | |||
| 1.3.6.1.4.1.9.9.305.1.3.2 | ScalarcseHaRestartReason | accessible-for-notify | current | The reason for most recent restart of a service on the 'active' supervisor. |
| 1.3.6.1.4.1.9.9.305.1.3.3 | ScalarcseHaRestartStateless | accessible-for-notify | current | Tells if the most recent restart of a service on the 'active' supervisor was 'stateless' or not. A 'stateless' restart of a service is where no runtime informa… |
| 1.3.6.1.4.1.9.9.305.1.3.4 | ScalarcseHaRestartService | accessible-for-notify | current | Name of the service (or process) that was restarted on the 'active' supervisor. |
| 1.3.6.1.4.1.9.9.305.1.3.5 | NodecseHaNotification | |||
| 1.3.6.1.4.1.9.9.305.1.3.5.0 | NodecseHaNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.305.1.3.5.0.1 | NotificationcseHaRestartNotify | current | A service restart notification is generated whenever a service (or a process) on the 'active' supervisor is restarted. | |
| 1.3.6.1.4.1.9.9.305.1.3.5.0.2 | NotificationcseShutDownNotify | current | A system shutdown notification is generated whenever a system is going to shut down. The cseHaShutDownReason, describes the reason as to why the system is goin… | |
| 1.3.6.1.4.1.9.9.305.1.3.6 | ScalarcseHaShutDownReason | accessible-for-notify | current | The description of the reason as to why the system is going to go down. |
| 1.3.6.1.4.1.9.9.305.1.4 | NodeciscoSwFailureGroup | |||
| 1.3.6.1.4.1.9.9.305.1.4.1 | ScalarcseSwCorePath | read-only | current | Provides the path where the software cores are stored on the system. The management application can use this path to copy the cores from the system using CISCO… |
| 1.3.6.1.4.1.9.9.305.1.4.2 | TablecseSwCoresTable | not-accessible | current | A table containing information about the system cores that have been generated as an effect of some system failures. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1 | RowcseSwCoresEntry | not-accessible | current | An entry (conceptual row) in the cseSwCoresTable, containing information about cores that have been generated. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.1 | ColumncseSwCoresModule | not-accessible | current | The physical module on which the process crashed. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.2 | ColumncseSwCoresProcName | not-accessible | current | The name of the process that crashed and generated core. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.3 | ColumncseSwCoresInstance | not-accessible | current | The instance of the core for a process identified by cseSwCoresProcName and on the module identified by cseSwCoresModule. To uniquely identify a core, the modu… |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.4 | ColumncseSwCoresPID | read-only | current | The process identifier of the process that dumped the core. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.5 | ColumncseSwCoresTimeCreated | read-only | current | The time at which the core was created. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.6 | ColumncseSwCoresSlotNum | read-only | current | The slot number corresponding to the cseSwCoresModule in this chassis. |
| 1.3.6.1.4.1.9.9.305.1.4.2.1.7 | ColumncseSwCoresFileName | read-only | current | This object contains the core file-name(including the path, relative to the value in the cseSwCorePath object). If the cseSwCorePath contains zero length octet… |
| 1.3.6.1.4.1.9.9.305.1.4.3 | NodecseFailNotification | |||
| 1.3.6.1.4.1.9.9.305.1.4.3.0 | NodecseFailNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.305.1.4.3.0.1 | NotificationcseFailSwCoreNotify | current | A notification is generated whenever a software crash occurs and a core file is generated. | |
| 1.3.6.1.4.1.9.9.305.1.4.3.0.2 | NotificationcseFailSwCoreNotifyExtended | current | A notification is generated whenever a software crash occurs and a core file is generated. | |
| 1.3.6.1.4.1.9.9.305.1.5 | NodeciscoSwFailureNotifControl | |||
| 1.3.6.1.4.1.9.9.305.1.5.1 | ScalarciscoSwFailureNotifEnable | read-write | current | This object is used for administratively enabling/disabling the cseFailSwCoreNotify or cseFailSwCoreNotifyExtended notifications. |
| 1.3.6.1.4.1.9.9.305.1.6 | NodeciscoSystemSwitchingModeGroup | |||
| 1.3.6.1.4.1.9.9.305.1.6.1 | ScalarciscoSystemSwitchingModeAdmin | read-write | current | Object to specify system's switching mode. 'other' - any other state not covered by below enumerations 'notApplicable' - switching mode configuration is not ap… |
| 1.3.6.1.4.1.9.9.305.1.6.2 | ScalarciscoSystemSwitchingModeOper | read-only | current | Object indicate system's operational switching mode. 'other' - any other state not covered by below enumerations 'notApplicable' - switching mode configuration… |
| 1.3.6.1.4.1.9.9.305.1.6.3 | ScalarciscoSystemSwitchingMode | read-only | current | Object indicate system's operating switching mode. 'cutThrough' - switch begins forwarding the frame as soon as the switch has read the destination details in … |
| 1.3.6.1.4.1.9.9.305.1.7 | NodeciscoSystemMaintModeGroup | |||
| 1.3.6.1.4.1.9.9.305.1.7.1 | ScalarcseMaintModeState | read-only | current | The maintenance mode operational state for the system. |
| 1.3.6.1.4.1.9.9.305.1.7.2 | NodecseMaintModeNotification | |||
| 1.3.6.1.4.1.9.9.305.1.7.2.0 | NodecseMaintModeNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.305.1.7.2.0.1 | NotificationcseNormalModeChangeNotify | current | A normal mode state change is generated when the system is changed from maintenance mode to normal mode. | |
| 1.3.6.1.4.1.9.9.305.1.7.2.0.2 | NotificationcseMaintModeChangeNotify | current | A maintenance mode state change is generated when the system is changed from normal mode to maintenance mode. | |
| 1.3.6.1.4.1.9.9.305.1.8 | NodeciscoSystemMaintModeNotifControl | |||
| 1.3.6.1.4.1.9.9.305.1.8.1 | ScalarciscoSystemNormalModeNotifEnable | read-write | current | This object is used for administratively enabling/disabling the cseNormalModeChangeNotify. |
| 1.3.6.1.4.1.9.9.305.1.8.2 | ScalarciscoSystemMaintModeNotifEnable | read-write | current | This object is used for administratively enabling/disabling the cseMaintModeChangeNotify. |
| 1.3.6.1.4.1.9.9.305.1.9 | NodeciscoSystemReloadGroup | |||
| 1.3.6.1.4.1.9.9.305.1.9.1 | ScalarcseSystemReloadPending | read-only | current | This object is used to indicate if a system reload is needed to make feature configuration change effective. The object returns 'true' if a system reload is re… |
| 1.3.6.1.4.1.9.9.305.2 | NodeciscoSystemExtMIBConformance | |||
| 1.3.6.1.4.1.9.9.305.2.1 | NodeciscoSystemExtMIBCompliances | |||
| 1.3.6.1.4.1.9.9.305.2.1.1 | ComplianceciscoSystemExtMIBCompliance | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.2 | ComplianceciscoSystemExtMIBComplianceRev1 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.3 | ComplianceciscoSystemExtMIBComplianceRev2 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.4 | ComplianceciscoSystemExtMIBComplianceRev3 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.5 | ComplianceciscoSystemExtMIBComplianceRev4 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.6 | ComplianceciscoSystemExtMIBComplianceRev5 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.7 | ComplianceciscoSystemExtMIBComplianceRev6 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.8 | ComplianceciscoSystemExtMIBComplianceRev7 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.9 | ComplianceciscoSystemExtMIBComplianceRev8 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.11 | ComplianceciscoSystemExtMIBComplianceRev9 | deprecated | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.1.12 | ComplianceciscoSystemExtMIBComplianceRev10 | current | The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.305.2.2 | NodeciscoSystemExtMIBGroups | |||
| 1.3.6.1.4.1.9.9.305.2.2.1 | GroupciscoSystemExtInfoGroup | deprecated | A collection of objects for system information. ciscoSystemExtInfoGroup object is superseded by ciscoSystemExtInfoGroupRev1. | |
| 1.3.6.1.4.1.9.9.305.2.2.2 | GroupciscoSystemExtErrorGroup | current | A collection of objects for logging SNMP set error. | |
| 1.3.6.1.4.1.9.9.305.2.2.3 | GroupciscoSystemExtHaGroup | current | A collection of objects for High Availability. | |
| 1.3.6.1.4.1.9.9.305.2.2.4 | GroupciscoSystemExtNotificationGroup | current | A collection of notifications for the High Availability. | |
| 1.3.6.1.4.1.9.9.305.2.2.5 | GroupciscoSystemExtInfoGroupRev1 | deprecated | A collection of objects for system information. ciscoSystemExtInfoGroupRev1 object is superseded by ciscoSystemExtInfoGroupRev3. | |
| 1.3.6.1.4.1.9.9.305.2.2.6 | GroupciscoSystemExtInfoGroupOptional | current | A collection of objects for system information which are optional. | |
| 1.3.6.1.4.1.9.9.305.2.2.7 | GroupciscoSystemExtSwFailureGroup | current | A collection of objects for system software failure information which are optional. | |
| 1.3.6.1.4.1.9.9.305.2.2.8 | GroupciscoSystemExtInfoGroupRev2 | current | A collection of objects for system information. | |
| 1.3.6.1.4.1.9.9.305.2.2.9 | GroupciscoSystemExtSwFailureGroup2 | current | A collection of objects for system software failure information which are optional. | |
| 1.3.6.1.4.1.9.9.305.2.2.10 | GroupciscoSystemExtNotificationGroupSup1 | current | A collection of notifications for the system MIB. | |
| 1.3.6.1.4.1.9.9.305.2.2.11 | GroupciscoSystemExtHaGroupRev1 | current | A collection of objects for High Availability. | |
| 1.3.6.1.4.1.9.9.305.2.2.12 | GroupciscoSystemExtInfoTelnetGroup | current | A collection of objects related to telnet support to the device. | |
| 1.3.6.1.4.1.9.9.305.2.2.13 | GroupciscoSystemExtNotificationGroupSup2 | current | A collection of notification related to core file creation. | |
| 1.3.6.1.4.1.9.9.305.2.2.14 | GroupciscoSystemExtSwFailureGroup3 | current | A collection of objects related to the core file. | |
| 1.3.6.1.4.1.9.9.305.2.2.15 | GroupciscoSystemExtSwFailureControlGroup | current | This group of objects controls the sending of notifications defined in this MIB module. | |
| 1.3.6.1.4.1.9.9.305.2.2.16 | GroupciscoSystemExtInfoFIPSGroup | current | A collection of objects related to FIPS support to the device. | |
| 1.3.6.1.4.1.9.9.305.2.2.17 | GroupciscoSystemExtInfoGroupRev3 | current | A collection of objects for system information. | |
| 1.3.6.1.4.1.9.9.305.2.2.18 | GroupciscoSystemSwitchingModeObjectsGroup | current | A collection of objects to support Switching Mode feature. | |
| 1.3.6.1.4.1.9.9.305.2.2.19 | GroupciscoSystemMaintModeObjectsGroup | current | A collection of objects to support Maint mode state feature. | |
| 1.3.6.1.4.1.9.9.305.2.2.20 | GroupciscoSystemMaintModeNotificationGroup | current | A collection of notification related to core file creation. | |
| 1.3.6.1.4.1.9.9.305.2.2.21 | GroupciscoSystemReloadObjectsGroup | current | A collection of objects to support system reload. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoMaintModeState | INTEGER { normal(1), maintenance(2), unplannedMaint(3) } | current | Maintenance Mode state for the system. normal (1) - normal operational state maintenance (2) - maintenance mode operational state unplannedMaint (3) - unplanned maintenance state |
| CseHaRestartReason | INTEGER { unknown(1), ungracefulExit(2), otherSignal(3), sigterm(4), softwareUpgrade(5), configUpdate(6), configRemove(7), shutdown(8), aborted(9), heartbeatFailure(10), userTerminate(11), gracefulExit(12), noCallHomeFailure(13), serviceTimeout(14) } | current | Reason codes for the restart of a service. unknown (1) - ungraceful exit ungracefulExit (2) - ungraceful exit otherSignal (3) - service got some other signal sigterm (4) - received SIGTERM softwareUpgrade (5) - software… |