CISCO-TAP-MIB
78 objects
This module manages Cisco's intercept feature.
Imported Objects
| CISCO-QOS-PIB-MIB | Dscp |
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.252 | IdentitycTapMIB | This module manages Cisco's intercept feature. | ||
| 1.3.6.1.4.1.9.9.252.0 | NodecTapMIBNotifications | |||
| 1.3.6.1.4.1.9.9.252.0.1 | NotificationcTapMIBActive | current | This Notification is sent when an intercepting router or switch is first capable of intercepting a packet corresponding to a configured data stream. If the con… | |
| 1.3.6.1.4.1.9.9.252.0.2 | NotificationcTapMediationTimedOut | current | When an intercept is autonomously removed by an intercepting device, such as due to the time specified in cTapMediationTimeout arriving, the device notifies th… | |
| 1.3.6.1.4.1.9.9.252.0.3 | NotificationcTapMediationDebug | current | When there is intervention needed due to some events related to entries configured in cTapMediationTable, the device notifies the manager of the event. This no… | |
| 1.3.6.1.4.1.9.9.252.0.4 | NotificationcTapStreamIpDebug | current | When there is intervention needed due to some events related to entries configured in cTapStreamIpTable, the device notifies the manager of the event. This not… | |
| 1.3.6.1.4.1.9.9.252.1 | NodecTapMIBObjects | |||
| 1.3.6.1.4.1.9.9.252.1.1 | NodecTapMediationGroup | |||
| 1.3.6.1.4.1.9.9.252.1.1.1 | ScalarcTapMediationNewIndex | read-only | current | This object contains a value which may be used as an index value for a new cTapMediationEntry. Whenever read, the agent will change the value to a new non-conf… |
| 1.3.6.1.4.1.9.9.252.1.1.2 | TablecTapMediationTable | not-accessible | current | This table lists the Mediation Devices with which the intercepting device communicates. These may be on the same or different Mediation Devices. This table is … |
| 1.3.6.1.4.1.9.9.252.1.1.2.1 | RowcTapMediationEntry | not-accessible | current | The entry describes a single session maintained with an application on a Mediation Device. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.1 | ColumncTapMediationContentId | not-accessible | current | cTapMediationContentId is a session identifier, from the intercept application's perspective, and a content identifier from the Mediation Device's perspective.… |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.2 | ColumncTapMediationDestAddressType | read-create | current | The type of cTapMediationDestAddress. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.3 | ColumncTapMediationDestAddress | read-create | current | The IP Address of the Mediation Device's network interface to which to direct intercepted traffic. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.4 | ColumncTapMediationDestPort | read-create | current | The port number on the Mediation Device's network interface to which to direct intercepted traffic. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.5 | ColumncTapMediationSrcInterface | read-create | current | The interface on the intercepting device from which to transmit intercepted data. If zero, any interface may be used according to normal IP practice. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.6 | ColumncTapMediationRtcpPort | read-only | current | The port number on the intercepting device to which the Mediation Devices directs RTCP Receiver Reports and Nacks. This object is only relevant when the value … |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.7 | ColumncTapMediationDscp | read-create | current | The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.8 | ColumncTapMediationDataType | read-create | current | If RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload… |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.9 | ColumncTapMediationRetransmitType | read-create | current | If RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload… |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.10 | ColumncTapMediationTimeout | read-create | current | The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function cease. Since the initiating network ma… |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.11 | ColumncTapMediationTransport | read-create | current | The protocol used in transferring intercepted data to the Mediation Device. The following protocols may be supported: udp: PacketCable udp format rtpNack: RTP … |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.12 | ColumncTapMediationNotificationEnable | read-create | current | This variable controls the generation of any notifications or informs by the MIB agent for this table entry. |
| 1.3.6.1.4.1.9.9.252.1.1.2.1.13 | ColumncTapMediationStatus | read-create | current | The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. cTapMediationTimeout may be modifie… |
| 1.3.6.1.4.1.9.9.252.1.1.3 | ScalarcTapMediationCapabilities | read-only | current | This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software… |
| 1.3.6.1.4.1.9.9.252.1.2 | NodecTapStreamGroup | |||
| 1.3.6.1.4.1.9.9.252.1.2.1 | ScalarcTapStreamCapabilities | read-only | current | This object displays what types of intercept streams can be configured on this type of device. This may be dependent on hardware capabilities, software capabil… |
| 1.3.6.1.4.1.9.9.252.1.2.2 | TablecTapStreamIpTable | not-accessible | current | The Intercept Stream IP Table lists the IPv4 and IPv6 streams to be intercepted. The same data stream may be required by multiple taps, and one might assume th… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1 | RowcTapStreamIpEntry | not-accessible | current | A stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.1 | ColumncTapStreamIpIndex | not-accessible | current | The index of the stream itself. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.2 | ColumncTapStreamIpInterface | read-create | current | The ifIndex value of the interface over which traffic to be intercepted is received or transmitted. The interface may be physical or virtual. If this is the on… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.3 | ColumncTapStreamIpAddrType | read-create | current | The type of address, used in packet selection. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.4 | ColumncTapStreamIpDestinationAddress | read-create | current | The Destination address or prefix used in packet selection. This address will be of the type specified in cTapStreamIpAddrType. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.5 | ColumncTapStreamIpDestinationLength | read-create | current | The length of the Destination Prefix. A value of zero causes all addresses to match. This prefix length will be consistent with the type specified in cTapStrea… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.6 | ColumncTapStreamIpSourceAddress | read-create | current | The Source Address used in packet selection. This address will be of the type specified in cTapStreamIpAddrType. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.7 | ColumncTapStreamIpSourceLength | read-create | current | The length of the Source Prefix. A value of zero causes all addresses to match. This prefix length will be consistent with the type specified in cTapStreamIpAd… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.8 | ColumncTapStreamIpTosByte | read-create | current | The value of the TOS byte, when masked with cTapStreamIpTosByteMask, of traffic to be intercepted. If cTapStreamIpTosByte & (~cTapStreamIpTosByteMask) != 0, co… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.9 | ColumncTapStreamIpTosByteMask | read-create | current | The value of the TOS byte in an IPv4 or IPv6 header is ANDed with cTapStreamIpTosByteMask and compared with cTapStreamIpTosByte. If the values are equal, the c… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.10 | ColumncTapStreamIpFlowId | read-create | current | The flow identifier in an IPv6 header. -1 indicates that the Flow Id is unused. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.11 | ColumncTapStreamIpProtocol | read-create | current | The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. -1 means 'any IP protocol'. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.12 | ColumncTapStreamIpDestL4PortMin | read-create | current | The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specif… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.13 | ColumncTapStreamIpDestL4PortMax | read-create | current | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or grea… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.14 | ColumncTapStreamIpSourceL4PortMin | read-create | current | The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specif… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.15 | ColumncTapStreamIpSourceL4PortMax | read-create | current | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or grea… |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.16 | ColumncTapStreamIpInterceptEnable | read-create | current | If 'true', the tap should intercept matching traffic. If 'false', this entry is used to pre-screen packets for intercept. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.17 | ColumncTapStreamIpInterceptedPackets | read-only | current | The number of packets matching this data stream specification that have been intercepted. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.18 | ColumncTapStreamIpInterceptDrops | read-only | current | The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process. |
| 1.3.6.1.4.1.9.9.252.1.2.2.1.19 | ColumncTapStreamIpStatus | read-create | current | The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTapStreamIpInterceptEnable may be modified … |
| 1.3.6.1.4.1.9.9.252.1.2.3 | TablecTapStream802Table | not-accessible | current | The Intercept Stream 802 Table lists the IEEE 802 data streams to be intercepted. The same data stream may be required by multiple taps, and one might assume t… |
| 1.3.6.1.4.1.9.9.252.1.2.3.1 | RowcTapStream802Entry | not-accessible | current | A stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and… |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.1 | ColumncTapStream802Index | not-accessible | current | The index of the stream itself. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.2 | ColumncTapStream802Fields | read-create | current | This object displays what attributes must be tested to identify traffic which requires interception. The packet matches if all flagged fields match. interface:… |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.3 | ColumncTapStream802Interface | read-create | current | The ifIndex value of the interface over which traffic to be intercepted is received or transmitted. The interface may be physical or virtual. If this is the on… |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.4 | ColumncTapStream802DestinationAddress | read-create | current | The Destination address used in packet selection. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.5 | ColumncTapStream802SourceAddress | read-create | current | The Source Address used in packet selection. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.6 | ColumncTapStream802EthernetPid | read-create | current | The value of the Ethernet Protocol Identifier, which may be found on Ethernet traffic or IEEE 802.2 SNAP traffic. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.7 | ColumncTapStream802DestinationLlcSap | read-create | current | The value of the IEEE 802.2 Destination SAP. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.8 | ColumncTapStream802SourceLlcSap | read-create | current | The value of the IEEE 802.2 Source SAP. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.9 | ColumncTapStream802InterceptEnable | read-create | current | If 'true', the tap enables interception of matching traffic. If cTapStreamCapabilities flag tapEnable is zero, this may not be set to 'false'. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.10 | ColumncTapStream802InterceptedPackets | read-only | current | The number of packets matching this data stream specification that have been intercepted. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.11 | ColumncTapStream802InterceptDrops | read-only | current | The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process. |
| 1.3.6.1.4.1.9.9.252.1.2.3.1.12 | ColumncTapStream802Status | read-create | current | The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTapStream802InterceptEnable can be modified… |
| 1.3.6.1.4.1.9.9.252.1.3 | NodecTapDebugGroup | |||
| 1.3.6.1.4.1.9.9.252.1.3.1 | TablecTapDebugTable | not-accessible | current | A table that contains Lawful Intercept debug information available on this device. This table is used to map an error code to a text message for further inform… |
| 1.3.6.1.4.1.9.9.252.1.3.1.1 | RowcTapDebugEntry | not-accessible | current | A list of the debug messages. |
| 1.3.6.1.4.1.9.9.252.1.3.1.1.1 | ColumncTapDebugIndex | not-accessible | current | Indicates an error code. |
| 1.3.6.1.4.1.9.9.252.1.3.1.1.2 | ColumncTapDebugMessage | read-only | current | A text string contains the description of an error code. |
| 1.3.6.1.4.1.9.9.252.2 | NodecTapMIBConformance | |||
| 1.3.6.1.4.1.9.9.252.2.1 | NodecTapMIBCompliances | |||
| 1.3.6.1.4.1.9.9.252.2.1.1 | CompliancecTapMIBCompliance | current | The compliance statement for entities which implement the Cisco Intercept MIB | |
| 1.3.6.1.4.1.9.9.252.2.2 | NodecTapMIBGroups | |||
| 1.3.6.1.4.1.9.9.252.2.2.1 | GroupcTapMediationComplianceGroup | current | These objects are necessary for description of the data streams directed to a Mediation Device. | |
| 1.3.6.1.4.1.9.9.252.2.2.2 | GroupcTapStreamComplianceGroup | current | These objects are necessary for a description of the packets to select for interception. | |
| 1.3.6.1.4.1.9.9.252.2.2.3 | GroupcTapStreamIpComplianceGroup | current | These objects are necessary for a description of IPv4 and IPv6 packets to select for interception. | |
| 1.3.6.1.4.1.9.9.252.2.2.4 | GroupcTapStream802ComplianceGroup | current | These objects are necessary for a description of IEEE 802 packets to select for interception. | |
| 1.3.6.1.4.1.9.9.252.2.2.5 | GroupcTapNotificationGroup | current | These notifications are used to present status from the intercepting device to the Mediation Device. | |
| 1.3.6.1.4.1.9.9.252.2.2.6 | GroupcTapMediationCpbComplianceGroup | current | These objects are necessary for a description of the mediation device to select for Lawful Intercept. | |
| 1.3.6.1.4.1.9.9.252.2.2.7 | GroupcTapDebugComplianceGroup | current | These objects are necessary for debug information. |