MIB Viewer

CISCO-TAP2-MIB

67 objects
This module manages Cisco's intercept feature. This MIB replaces CISCO-TAP-MIB. This MIB defines a generic stream table that contains fields common to all intercept types. Specific intercept filters are defined in extension MIBs. They are CISCO-IP-TAP-MIB for IP intercepts, CISCO-802-TAP-MIB for IEEE 802 intercepts and CISCO-USER-CONNECTION-TAP-MIB for RADIUS-based user connection intercepts.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.399IdentityciscoTap2MIBThis module manages Cisco's intercept feature. This MIB replaces CISCO-TAP-MIB. This MIB defines a generic stream table that contains fields common to all inte…
1.3.6.1.4.1.9.9.399.0NodeciscoTap2MIBNotifs
1.3.6.1.4.1.9.9.399.0.1NotificationciscoTap2MIBActivecurrentThis Notification is sent when an intercepting router or switch is first capable of intercepting a packet corresponding to a configured data stream. The value …
1.3.6.1.4.1.9.9.399.0.2NotificationciscoTap2MediationTimedOutcurrentWhen an intercept is autonomously removed by an intercepting device, such as due to the time specified in cTap2MediationTimeout arriving, the device notifies t…
1.3.6.1.4.1.9.9.399.0.3NotificationciscoTap2MediationDebugcurrentWhen there is intervention needed due to some events related to entries configured in cTap2MediationTable, the device notifies the manager of the event. This n…
1.3.6.1.4.1.9.9.399.0.4NotificationciscoTap2StreamDebugcurrentWhen there is intervention needed due to some events related to entries configured in cTap2StreamTable, the device notifies the manager of the event. This noti…
1.3.6.1.4.1.9.9.399.0.5NotificationciscoTap2SwitchovercurrentThis notification is sent when there is a redundant (standby) route processor available on the intercepting device and the current active processor is going do…
1.3.6.1.4.1.9.9.399.1NodeciscoTap2MIBObjects
1.3.6.1.4.1.9.9.399.1.1NodecTap2MediationGroup
1.3.6.1.4.1.9.9.399.1.1.1ScalarcTap2MediationNewIndexread-onlycurrentThis object contains a value which may be used as an index value for a new cTap2MediationEntry. Whenever read, the agent will change the value to a new non-con…
1.3.6.1.4.1.9.9.399.1.1.2TablecTap2MediationTablenot-accessiblecurrentThis table lists the Mediation Devices with which the intercepting device communicates. These may be on the same or different Mediation Devices. This table is …
1.3.6.1.4.1.9.9.399.1.1.2.1RowcTap2MediationEntrynot-accessiblecurrentThe entry describes a single session maintained with an application on a Mediation Device.
1.3.6.1.4.1.9.9.399.1.1.2.1.1ColumncTap2MediationContentIdnot-accessiblecurrentcTap2MediationContentId is a session identifier, from the intercept application's perspective, and a content identifier from the Mediation Device's perspective…
1.3.6.1.4.1.9.9.399.1.1.2.1.2ColumncTap2MediationDestAddressTyperead-createcurrentThe type of cTap2MediationDestAddress.
1.3.6.1.4.1.9.9.399.1.1.2.1.3ColumncTap2MediationDestAddressread-createcurrentThe IP Address of the Mediation Device's network interface to which to direct intercepted traffic.
1.3.6.1.4.1.9.9.399.1.1.2.1.4ColumncTap2MediationDestPortread-createcurrentThe port number on the Mediation Device's network interface to which to direct intercepted traffic.
1.3.6.1.4.1.9.9.399.1.1.2.1.5ColumncTap2MediationSrcInterfaceread-createcurrentThe interface on the intercepting device from which to transmit intercepted data. If zero, any interface may be used according to normal IP practice.
1.3.6.1.4.1.9.9.399.1.1.2.1.6ColumncTap2MediationRtcpPortread-onlycurrentThe port number on the intercepting device to which the Mediation Devices directs RTCP Receiver Reports and Nacks. This object is only relevant when the value …
1.3.6.1.4.1.9.9.399.1.1.2.1.7ColumncTap2MediationDscpread-createcurrentThe Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.
1.3.6.1.4.1.9.9.399.1.1.2.1.8ColumncTap2MediationDataTyperead-createcurrentIf RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload…
1.3.6.1.4.1.9.9.399.1.1.2.1.9ColumncTap2MediationRetransmitTyperead-createcurrentIf RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload…
1.3.6.1.4.1.9.9.399.1.1.2.1.10ColumncTap2MediationTimeoutread-createcurrentThe time at which this row and all related Stream Table rows should be automatically removed, and the intercept function cease. Since the initiating network ma…
1.3.6.1.4.1.9.9.399.1.1.2.1.11ColumncTap2MediationTransportread-createcurrentThe protocol used in transferring intercepted data to the Mediation Device. The following protocols may be supported: udp: PacketCable udp format rtpNack: RTP …
1.3.6.1.4.1.9.9.399.1.1.2.1.12ColumncTap2MediationNotificationEnableread-createcurrentThis variable controls the generation of any notifications or informs by the MIB agent for this table entry.
1.3.6.1.4.1.9.9.399.1.1.2.1.13ColumncTap2MediationStatusread-createcurrentThe status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. cTap2MediationTimeout may be modifi…
1.3.6.1.4.1.9.9.399.1.1.3ScalarcTap2MediationCapabilitiesread-onlycurrentThis object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software…
1.3.6.1.4.1.9.9.399.1.2NodecTap2StreamGroup
1.3.6.1.4.1.9.9.399.1.2.1TablecTap2StreamTablenot-accessiblecurrentThe Intercept Stream Table lists the traffic streams to be intercepted. The same data stream may be required by multiple taps, and one might assume that often …
1.3.6.1.4.1.9.9.399.1.2.1.1RowcTap2StreamEntrynot-accessiblecurrentA stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and…
1.3.6.1.4.1.9.9.399.1.2.1.1.1ColumncTap2StreamIndexnot-accessiblecurrentThe index of the stream itself.
1.3.6.1.4.1.9.9.399.1.2.1.1.2ColumncTap2StreamTyperead-createcurrentIdentifies the type of intercept filter associated to this generic stream. The following types of streams are supported: ip: The specific filter is an IP filte…
1.3.6.1.4.1.9.9.399.1.2.1.1.3ColumncTap2StreamInterceptEnableread-createcurrentIf 'true', the tap should intercept matching traffic. The value for this object should be set to 'true' only after an additional filter specification has been …
1.3.6.1.4.1.9.9.399.1.2.1.1.4ColumncTap2StreamInterceptedPacketsread-onlycurrentThe number of packets matching this data stream specification that have been intercepted.
1.3.6.1.4.1.9.9.399.1.2.1.1.5ColumncTap2StreamInterceptDropsread-onlycurrentThe number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process.
1.3.6.1.4.1.9.9.399.1.2.1.1.6ColumncTap2StreamStatusread-createcurrentThe status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTap2StreamInterceptEnable may be modified a…
1.3.6.1.4.1.9.9.399.1.2.1.1.7ColumncTap2StreamInterceptedHCPacketsread-onlycurrentThe number of packets matching this data stream specification that have been intercepted. This object is a 64-bit version of cTap2StreamInterceptedPackets.
1.3.6.1.4.1.9.9.399.1.2.1.1.8ColumncTap2StreamInterceptHCDropsread-onlycurrentThe number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process. This object is a 64-…
1.3.6.1.4.1.9.9.399.1.3NodecTap2DebugGroup
1.3.6.1.4.1.9.9.399.1.3.1ScalarcTap2DebugAgeread-onlycurrentThis object contains the duration in minutes for which an entry in cTap2DebugTable is maintained by the implementing device after which the entry is deleted. T…
1.3.6.1.4.1.9.9.399.1.3.2ScalarcTap2DebugMaxEntriesread-onlycurrentThis object contains the maximum number of debug messages maintained by the implementing device at a time. If this limit is crossed, most recent message will r…
1.3.6.1.4.1.9.9.399.1.3.3TablecTap2DebugTablenot-accessiblecurrentA table that contains Lawful Intercept debug messages generated by the implementing device. This table is used by ciscoTap2MediationDebug and ciscoTap2StreamDe…
1.3.6.1.4.1.9.9.399.1.3.3.1RowcTap2DebugEntrynot-accessiblecurrentA list of the debug messages.
1.3.6.1.4.1.9.9.399.1.3.3.1.1ColumncTap2DebugIndexnot-accessiblecurrentIndex to the debug table.
1.3.6.1.4.1.9.9.399.1.3.3.1.2ColumncTap2DebugMediationIdread-onlycurrentThe value of this object is that of cTap2MediationContentId identifying an entry in cTap2MediationTable. Note this object may contain a value for which an entr…
1.3.6.1.4.1.9.9.399.1.3.3.1.3ColumncTap2DebugStreamIdread-onlycurrentThe value of this object is that of cTap2StreamIndex of an entry in cTap2StreamTable. This object along with cTap2DebugMediationId identifies an entry in cTap2…
1.3.6.1.4.1.9.9.399.1.3.3.1.4ColumncTap2DebugMessageread-onlycurrentA text string contains the debug message.
1.3.6.1.4.1.9.9.399.1.3.3.1.5ColumncTap2DebugStatusread-writecurrentThe status of this conceptual row. A row in this table is created by the implementing device. A management station cannot modify any of the objects in this row…
1.3.6.1.4.1.9.9.399.1.3.4TablecTap2DebugUserTablenot-accessiblecurrentThe User Table lists information of all the users configured in the system who are given permission by different Mediation Devices to access Lawful Intercept C…
1.3.6.1.4.1.9.9.399.1.3.4.1RowcTap2DebugUserEntrynot-accessiblecurrentA conceptual row in the cTap2DebugUserTable. Each row represents name of user on the router to whom Mediation Device with CCCid represented by cTap2MediationCo…
1.3.6.1.4.1.9.9.399.1.3.4.1.1ColumncTap2DebugUserNamenot-accessiblecurrentA human readable string representing the name of debug user who will have access to Lawful Intercept commands.
1.3.6.1.4.1.9.9.399.1.3.4.1.2ColumncTap2DebugUserTimeoutread-createcurrentThis object specifies the time at which the row will be removed from the table by the system. The value of this object is only effective when the value of corr…
1.3.6.1.4.1.9.9.399.1.3.4.1.3ColumncTap2DebugUserStorageTyperead-createcurrentThis object specifies the storage type of this conceptual row. If it is set to 'nonVolatile', this entry can be saved into non-volatile memory.
1.3.6.1.4.1.9.9.399.1.3.4.1.4ColumncTap2DebugUserStatusread-createcurrentThe status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTap2DebugUserTimeout may be modified any ti…
1.3.6.1.4.1.9.9.399.2NodeciscoTap2MIBConform
1.3.6.1.4.1.9.9.399.2.1NodeciscoTap2MIBCompliances
1.3.6.1.4.1.9.9.399.2.1.1ComplianceciscoTap2MIBCompliancedeprecatedThe compliance statement for entities which implement the Cisco Intercept MIB
1.3.6.1.4.1.9.9.399.2.1.2ComplianceciscoTap2MIBComplianceRev2deprecatedThe compliance statement for entities which implement the Cisco Intercept MIB. This compliance deprecates ciscoTap2MIBCompliance.
1.3.6.1.4.1.9.9.399.2.1.3ComplianceciscoTap2MIBComplianceRev3currentThe compliance statement for entities which implement the Cisco Intercept MIB. This compliance deprecates ciscoTap2MIBComplianceRev2.
1.3.6.1.4.1.9.9.399.2.2NodeciscoTap2MIBGroups
1.3.6.1.4.1.9.9.399.2.2.1GroupciscoTap2MediationComplianceGroupcurrentThese objects are necessary for description of the data streams directed to a Mediation Device.
1.3.6.1.4.1.9.9.399.2.2.2GroupciscoTap2StreamComplianceGroupcurrentThese objects are necessary for a description of the packets to select for interception.
1.3.6.1.4.1.9.9.399.2.2.3GroupciscoTap2NotificationGroupcurrentThese notifications are used to present status from the intercepting device to the Mediation Device.
1.3.6.1.4.1.9.9.399.2.2.4GroupciscoTap2MediationCpbComplianceGroupcurrentThese objects are necessary for a description of the mediation device to select for Lawful Intercept.
1.3.6.1.4.1.9.9.399.2.2.5GroupciscoTap2DebugComplianceGroupdeprecatedThese objects are necessary for debug information.
1.3.6.1.4.1.9.9.399.2.2.6GroupciscoTap2StreamHCStatsGroupcurrentThese objects are required for 64 bit version of cTap2StreamInterceptedPackets and cTap2StreamInterceptDrops
1.3.6.1.4.1.9.9.399.2.2.7GroupciscoTap2DebugComplianceGroupRev1currentThese objects are necessary for debug information. This compliance group deprecates ciscoTap2DebugComplianceGroup.
Type Definitions
NameSyntaxStatusDescription
Ctap2DscpINTEGER (0..63)currentAn integer that is in the range of the DiffServ codepoint values.