CISCO-TELEPRESENCE-CALL-MIB
175 objects
The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a person to feel as if they were present, to give the appearance that they were present, or to have an effect, at a location other than their true location. Telepresence call is an audio-video call; however, some Telepresence systems also support audio addin call. Different security levels are supported in some Telepresence systems; security level may be specified from call management system. Some Telepresence systems support Telepresence meeting, the agent of the corresponding systems may also support CISCO-TELEPRESENCE-MEETING-MIB.
Imported Objects
| CISCO-QOS-PIB-MIB | QosLayer2Cos |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned64 |
| DIFFSERV-DSCP-TC | Dscp |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.644 | IdentityciscoTelepresenceCallMIB | The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a person to feel as if they were pr… | ||
| 1.3.6.1.4.1.9.9.644.0 | NodeciscoTelepresenceCallMIBNotifs | |||
| 1.3.6.1.4.1.9.9.644.0.1 | NotificationctpcMgmtSysConnFailNotification | deprecated | This notification is sent when a call management system connection failure occurs. This notification is deprecated in favor of ctpcMgmtSysConnEventNotification… | |
| 1.3.6.1.4.1.9.9.644.0.2 | NotificationctpcStatNotificaion | current | This notification is sent when a call monitoring threshold is crossed. | |
| 1.3.6.1.4.1.9.9.644.0.3 | NotificationctpcMgmtSysConnEventNotification | current | This notification is sent when a call management system connection state change occurs. | |
| 1.3.6.1.4.1.9.9.644.1 | NodeciscoTelepresenceCallMIBObjects | |||
| 1.3.6.1.4.1.9.9.644.1.1 | NodectpcObjects | |||
| 1.3.6.1.4.1.9.9.644.1.1.1 | ScalarctpcStatNotifyEnable | read-write | current | This object controls generation of notifications for the real-time call statistics data monitoring. Call statistics monitoring threshold can be set by creating… |
| 1.3.6.1.4.1.9.9.644.1.1.2 | ScalarctpcMgmtSysConnNotifyEnable | read-write | current | This object controls generation of notifications for call management system connection state changes. When the object is 'true', the agent will generate notifi… |
| 1.3.6.1.4.1.9.9.644.1.2 | NodectpcInfoObjects | |||
| 1.3.6.1.4.1.9.9.644.1.2.1 | ScalarctpcLocalAddrType | read-only | current | This object specifies the type of address contained in the corresponding instance of ctpcLocalAddr. |
| 1.3.6.1.4.1.9.9.644.1.2.2 | ScalarctpcLocalAddr | read-only | current | This object specifies the address of the system in the format given by the corresponding instance of ctpcLocalAddrType. |
| 1.3.6.1.4.1.9.9.644.1.2.3 | TablectpcLocalDirNumTable | not-accessible | current | A table of information about E.164 numbers assigned to the Telepresence system. The directory numbers usually are specified by the call management system. Some… |
| 1.3.6.1.4.1.9.9.644.1.2.3.1 | RowctpcLocalDirNumEntry | not-accessible | current | An entry containing information about one E.164 number. |
| 1.3.6.1.4.1.9.9.644.1.2.3.1.1 | ColumnctpcLocalDirNumIndex | not-accessible | current | The object specifies a unique index for a local directory number entry associates to the system. |
| 1.3.6.1.4.1.9.9.644.1.2.3.1.2 | ColumnctpcLocalDirNum | read-only | current | This object specifies the directory number of the Telepresence system. |
| 1.3.6.1.4.1.9.9.644.1.2.3.1.3 | ColumnctpcExtNumberMask | read-only | current | This object indicates the external number mask that configured in the management system. For example, if ctpcExtNumberMask is configured as 9728XXXXX, and ctpc… |
| 1.3.6.1.4.1.9.9.644.1.2.4 | ScalarctpcMode | read-only | current | This object specifies the system configured call mode. It indicates if the call is processed by call management system or not. nonMgmtSys(1) Telepresence syste… |
| 1.3.6.1.4.1.9.9.644.1.2.5 | ScalarctpcActiveMgmtSysIndex | read-only | current | This object specifies the value of ctpcMgmtSysIndex which the Telepresence system currently connects. If the system is in 'nonMgmtSys' mode, this object will h… |
| 1.3.6.1.4.1.9.9.644.1.2.6 | TablectpcMgmtSysTable | not-accessible | current | A table of configured call management systems. |
| 1.3.6.1.4.1.9.9.644.1.2.6.1 | RowctpcMgmtSysEntry | not-accessible | current | An entry contains information about a call management system. |
| 1.3.6.1.4.1.9.9.644.1.2.6.1.1 | ColumnctpcMgmtSysIndex | not-accessible | current | This object specifies a unique index for a call management system entry. |
| 1.3.6.1.4.1.9.9.644.1.2.6.1.2 | ColumnctpcMgmtSysAddrType | read-only | current | This object specifies the type of address contained in the corresponding instance of ctpcMgmtSysAddr. |
| 1.3.6.1.4.1.9.9.644.1.2.6.1.3 | ColumnctpcMgmtSysAddr | read-only | current | This object specifies a call management system address which a Telepresence system can connect to if it is in 'mgmtSys' mode. It is in the format given by the … |
| 1.3.6.1.4.1.9.9.644.1.2.6.1.4 | ColumnctpcMgmtSysConnStatus | read-only | current | This object specifies the last connection state between the Telepresence and a call management system. |
| 1.3.6.1.4.1.9.9.644.1.2.6.1.5 | ColumnctpcMgmtSysSIPRespCode | read-only | current | This object specifies the last SIP response code from call management system. |
| 1.3.6.1.4.1.9.9.644.1.2.7 | ScalarctpcTxDscpTelepresenceConfigured | read-only | current | This object specifies the configured DSCP for all outgoing streams for a Telepresence call. |
| 1.3.6.1.4.1.9.9.644.1.2.8 | ScalarctpcTxDscpAudioConfigured | read-only | current | This object specifies the configured DSCP for outgoing streams for audio-only call. |
| 1.3.6.1.4.1.9.9.644.1.3 | NodectpcStatMonitorObjects | |||
| 1.3.6.1.4.1.9.9.644.1.3.1 | TablectpcStatMonitoredTable | not-accessible | current | A table of configuration information for the monitoring of statistics of active Telepresence calls. The monitoring feature has a hysteresis mechanism to limit … |
| 1.3.6.1.4.1.9.9.644.1.3.1.1 | RowctpcStatMonitoredEntry | not-accessible | current | An entry contains a particular threshold configuration on an attribute for a stream type. For example, if latency of video stream is configured; average period… |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.1 | ColumnctpcStatMonitoredType | not-accessible | current | This object specifies a statistical attribute which to be monitored. |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.2 | ColumnctpcStatMonitoredStreamType | not-accessible | current | This object specifies a active Telepresence stream type which to be monitored. If the value of this object is 'all', all stream types are monitored with the co… |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.3 | ColumnctpcStatMonitoredUnit | read-only | current | This object specifies the corresponding unit of a monitoring attribute. The following table lists the possible values of this object, given the value of the co… |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.4 | ColumnctpcStatRisingThreshold | read-create | current | This object specifies the rising threshold of a monitoring attribute. When the call period value of the corresponding attribute is greater than or equal to thi… |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.5 | ColumnctpcStatFallingThreshold | read-create | current | This object specifies the falling threshold of a monitoring attribute. When the call period value of the corresponding attribute is less than or equal to this … |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.6 | ColumnctpcStatStartupAlarm | read-create | current | This object specifies the alarm that may be sent after the entry is first set to valid. If the first sample after this entry becomes valid is greater than or e… |
| 1.3.6.1.4.1.9.9.644.1.3.1.1.7 | ColumnctpcStatMonitoredStatus | read-create | current | This object specifies the status of ctpcStatMonitoredEntry. Once the entry status is set to 'active', the call statistics monitoring will be started. If this o… |
| 1.3.6.1.4.1.9.9.644.1.4 | NodectpcStatObjects | |||
| 1.3.6.1.4.1.9.9.644.1.4.1 | ScalarctpcStatOverallCalls | read-only | current | This object specifies total number of calls since Telepresence system was first in service. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it … |
| 1.3.6.1.4.1.9.9.644.1.4.2 | ScalarctpcStatOverallCallTime | read-only | current | This object specifies elapsed time of calls since Telepresence system was first in service. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it … |
| 1.3.6.1.4.1.9.9.644.1.4.3 | ScalarctpcStatTotalCalls | read-only | current | This object specifies total number of calls since Telepresence system was last rebooted. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wra… |
| 1.3.6.1.4.1.9.9.644.1.4.4 | ScalarctpcStatTotalCallTime | read-only | current | This object specifies elapsed time of calls since Telepresence system was last rebooted. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wra… |
| 1.3.6.1.4.1.9.9.644.1.4.5 | ScalarctpcSamplePeriod | read-write | current | This object specifies a sample period by which the following objects are based on: ctpcAvgPeriodLatency, ctpcMaxPeriodLatency, ctpcTxPeriodLostPackets, ctpcRxP… |
| 1.3.6.1.4.1.9.9.644.1.4.6 | ScalarctpcTableSize | read-write | current | This object specifies the maximum number of entries of the ctpcTable. Some agents restrict the maximum value of this object to be less than 500. When the capac… |
| 1.3.6.1.4.1.9.9.644.1.4.7 | ScalarctpcTableLastIndex | read-only | current | This object specifies the value of the ctpcIndex object corresponding to the last entry added to the table. When it reaches a maximum value of 2^32-1 (42949672… |
| 1.3.6.1.4.1.9.9.644.1.4.8 | TablectpcTable | not-accessible | current | A table for Telepresence call information. After management system initialization (i.e. when sysUpTime is reset to zero), this table records all calls until it… |
| 1.3.6.1.4.1.9.9.644.1.4.8.1 | RowctpcEntry | not-accessible | current | An entry contains information of a Telepresence supported call. Some Telepresence systems support both audio-video call and audio-addin call. A management stat… |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.1 | ColumnctpcIndex | not-accessible | current | This object specifies a unique identification of a call entry. If the chosen ctpcIndex value for the row creation is already in use by an existing entry, SNMP … |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.2 | ColumnctpcRemoteDirNum | read-create | current | This object specifies the remote directory number of a call. Once the ctpcRowStatus is set to 'active', the ctpcRemoteDirNum cannot be changed. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.3 | ColumnctpcLocalSIPCallId | read-only | current | This object specifies the local SIP call ID. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.4 | ColumnctpcTxDestAddrType | read-only | current | This object specifies the address type of the corresponding instance of ctpcTxDestAddr. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.5 | ColumnctpcTxDestAddr | read-only | current | This object specifies the address of the media packets forwarded to in the format given by the corresponding instance of ctpcTxDestAddrType. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.6 | ColumnctpcStartDateAndTime | read-only | current | This object specifies the value of local date and time when a call is started. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.7 | ColumnctpcDuration | read-only | current | This object specifies the elapsed time since the call established. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.8 | ColumnctpcType | read-create | current | This object specifies the call type. audioVideo (1) audioOnly (2) unknown (3) Some Telepresence systems only support audio-video call. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.9 | ColumnctpcSecurity | read-create | current | This object specifies the call security level. nonSecured (1) Neither media packets nor signaling packets are encrypted. authenticated (2) Signaling packets ar… |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.10 | ColumnctpcDirection | read-only | current | |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.11 | ColumnctpcState | read-create | current | This object specifies the call state. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.12 | ColumnctpcInitialBitRate | read-create | current | This object specifies the initial bit rate of a Telepresence call. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.13 | ColumnctpcLatestBitRate | read-only | current | This object specifies the current bit rate of a call. Telepresence call's bit rate may be lowered automatically due to network congestion. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.14 | ColumnctpcRowStatus | read-create | current | This object specifies the entry status of ctpcEntry. Once ctpcRowStatus is set to 'active', the call creation cannot be stopped. Changing the value of this obj… |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.15 | ColumnctpcAttributes | read-only | current | This object specifies the connection mode of a call. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.16 | ColumnctpcRemoteDevice | read-only | current | This object specifies the remote device type. |
| 1.3.6.1.4.1.9.9.644.1.4.8.1.17 | ColumnctpcCallTermReason | read-only | current | This object specifies the call termination reason. |
| 1.3.6.1.4.1.9.9.644.1.4.9 | TablectpcStatStreamTypeTable | not-accessible | current | A table of stream type information of a call. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1 | RowctpcStatStreamTypeEntry | not-accessible | current | An entry contains information on a particular stream type of a call. The entry will be deleted when the corresponding ctpcEntry specified by ctpcIndex is remov… |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.1 | ColumnctpcStreamType | not-accessible | current | This object specifies the call stream type. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.2 | ColumnctpcAvgPeriodLatency | read-only | current | This object specifies the average latency for the last sample period specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.3 | ColumnctpcAvgCallLatency | read-only | current | This object specifies the average latency for the duration of a call. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.4 | ColumnctpcMaxPeriodLatency | read-only | current | This object specifies the maximum latency among all the sample periods. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.5 | ColumnctpcMaxCallLatency | read-only | current | This object specifies the maximum latency for the duration of a call. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.6 | ColumnctpcMaxCallLatencyRecTime | read-only | current | This object specifies the elapsed time since the call is established when the maximum latency of a call is recorded. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.7 | ColumnctpcMediaSrcPort | read-only | current | This object specifies the source port to transmit and receive the media. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.8 | ColumnctpcMediaDestPort | read-only | current | This object specifies the dest port to transmit and receive the media. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.9 | ColumnctpcRxDscpCurrent | read-only | current | This object specifies the DSCP marking for the current call's incoming stream. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.10 | ColumnctpcRxDscpPrevious | read-only | current | This object specifies the previous DSCP marking for the current call's incoming stream. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.11 | ColumnctpcRxCoSCurrent | read-only | current | This object specifies the COS marking for the current call's incoming stream. |
| 1.3.6.1.4.1.9.9.644.1.4.9.1.12 | ColumnctpcRxCoSPrevious | read-only | current | This object specifies the previous COS marking for the current call's incoming stream. |
| 1.3.6.1.4.1.9.9.644.1.4.10 | TablectpcStatStreamSourceTable | not-accessible | current | A table for call stream source information. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1 | RowctpcStatStreamSourceEntry | not-accessible | current | An entry contains a stream source information of a call. The entry will be deleted when the corresponding ctpcEntry specified by ctpcIndex is removed. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.1 | ColumnctpcStreamSource | not-accessible | current | This object specifies the call stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.2 | ColumnctpcTxActive | read-only | current | This object is set to 'true' if data transmit from a stream source is 'active'. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.3 | ColumnctpcTxTotalBytes | read-only | current | This object specifies the total number of bytes transmitted from a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.4 | ColumnctpcTxTotalPackets | read-only | current | This object specifies the total number of packets transmitted from a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.5 | ColumnctpcTxLostPackets | read-only | current | This object specifies the number packets failed to deliver from a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.6 | ColumnctpcTxPeriodLostPackets | read-only | current | This object specifies the micropercent of packets failed to deliver from a stream source within the last sample period specified in ctpcSamplePeriod. When a ca… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.7 | ColumnctpcTxCallLostPackets | read-only | current | This object specifies the micropercent of packets failed to deliver from a stream source for the duration of a call. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.8 | ColumnctpcTxIDRPackets | read-only | current | This object specifies the number of IDR packets transmitted from a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.9 | ColumnctpcTxShapingWindow | read-only | current | This object specifies the time span between the last video packet and first video packet of a transmitted video frame. This object is only applicable for video… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.10 | ColumnctpcRxActive | read-only | current | This object is set to 'true' if data received by a stream source is 'active'. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.11 | ColumnctpcRxTotalBytes | read-only | current | This object specifies the total number of bytes received by a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.12 | ColumnctpcRxTotalPackets | read-only | current | This object specifies the total number of packets received by a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.13 | ColumnctpcRxLostPackets | read-only | current | This object specifies the number packets failed to reach a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.14 | ColumnctpcRxPeriodLostPackets | read-only | current | This object specifies the micropercent of packets failed to reach a stream source within the last sample period specified in ctpcSamplePeriod. When a call is t… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.15 | ColumnctpcRxCallLostPackets | read-only | current | This object specifies the micropercent of packets failed to reach a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.16 | ColumnctpcRxOutOfOrderPackets | read-only | current | This object specifies the number packets received out of order by a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.17 | ColumnctpcRxDuplicatePackets | read-only | current | This object specifies the number duplicated packets received by a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.18 | ColumnctpcRxLatePackets | read-only | current | This object specifies the number late packets received by a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.19 | ColumnctpcRxIDRPackets | read-only | current | This object specifies the number of IDR packets received by a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.20 | ColumnctpcRxShapingWindow | read-only | current | This object specifies the time span between the last video packet and first video packet of a received video frame. This object is only applicable for video st… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.21 | ColumnctpcRxCallAuthFailure | read-only | current | This object specifies the number of authenticated packets for which verification failed. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.22 | ColumnctpcAvgPeriodJitter | read-only | current | This object specifies the average jitter of a stream source for a Telepresence call from the most recent sample period specified in ctpcSamplePeriod. When a ca… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.23 | ColumnctpcAvgCallJitter | read-only | current | This object specifies the average jitter of a stream source for a Telepresence call among all the sample periods specified in ctpcSamplePeriod. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.24 | ColumnctpcMaxPeriodJitter | read-only | current | This object specifies the maximum jitter of a stream source for a Telepresence call for any sample period specified in ctpcSamplePeriod. When a call is termina… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.25 | ColumnctpcMaxCallJitter | read-only | current | This object specifies the maximum average jitter of a stream source for a Telepresence call among all the sample periods specified in ctpcSamplePeriod. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.26 | ColumnctpcMaxCallJitterRecTime | read-only | current | This object specifies the elapsed time since the call is established when the maximum jitter of a stream source is recorded. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.27 | ColumnctpcTxCodec | read-only | current | This object specifies the transmitted media codec type of a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.28 | ColumnctpcTxFrameRate | read-only | current | This object specifies the transmitted frame rate of a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.29 | ColumnctpcRxCodec | read-only | current | This object specifies the received media codec type of a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.30 | ColumnctpcRxFrameRate | read-only | current | This object specifies the received frame rate of a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.31 | ColumnctpcTxVideoHorzPixels | read-only | current | This object specifies the number of horizontal pixels in the outgoing video stream. When a call is terminated, the value will be the last recorded number of ho… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.32 | ColumnctpcTxVideoVertPixels | read-only | current | This object specifies the number of vertical pixels in the outgoing video stream. When a call is terminated, the value will be the last recorded number of vert… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.33 | ColumnctpcRxVideoHorzPixels | read-only | current | This object specifies the number of horizontal pixels in the incoming video stream. When a call is terminated, the value will be the last recorded number of ho… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.34 | ColumnctpcRxVideoVertPixels | read-only | current | This object specifies the number of vertical pixels in the incoming video streams. When a call is terminated, the value will be the last recorded number of ver… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.35 | ColumnctpcTxCallBitRate | read-only | current | This object indicates the bit rate transmitted from a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.36 | ColumnctpcTxPeriodBitRate | read-only | current | This object indicates the bit rate transmitted from a stream source within the last sample period that specified in ctpcSamplePeriod. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.37 | ColumnctpcRxCallBitRate | read-only | current | This object indicates the bit rate received from a stream source. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.38 | ColumnctpcRxPeriodBitRate | read-only | current | This object indicates the bit rate received from a stream source within the last sample period that specified in ctpcSamplePeriod. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.39 | ColumnctpcRxMaxPeriodLostPackets | read-only | current | This object indicates the maximum micropercent of packets failed to reach a stream source within the last sample period that specified in ctpcSamplePeriod. Whe… |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.40 | ColumnctpcRxMaxCallLostPackets | read-only | current | This object indicates the maximum micropercent of packets failed to reach a stream source for the duration of a call. |
| 1.3.6.1.4.1.9.9.644.1.4.10.1.41 | ColumnctpcRxMaxCallLostPacketsRecTime | read-only | current | This object indicates the elapsed time since the call is established when the maximum packet loss of a call is recorded. |
| 1.3.6.1.4.1.9.9.644.1.5 | NodectpcStatEventHistory | |||
| 1.3.6.1.4.1.9.9.644.1.5.1 | ScalarctpcStatEventHistTableSize | read-write | current | This object specifies the number of entries that the ctpcStatEventHistoryTable can contain. When the capacity of the ctpcStatEventHistoryTable has reached, the… |
| 1.3.6.1.4.1.9.9.644.1.5.2 | ScalarctpcStatEventHistLastIndex | read-only | current | This object specifies the value of the ctpcStatEventHistIndex object corresponding to the last entry added to the table by the agent. If the management client … |
| 1.3.6.1.4.1.9.9.644.1.5.3 | TablectpcStatEventHistoryTable | not-accessible | current | This table contains a history of Telepresence call monitoring thresholds crossed events. After management system initialization (i.e. when sysUpTime is reset t… |
| 1.3.6.1.4.1.9.9.644.1.5.3.1 | RowctpcStatEventHistoryEntry | not-accessible | current | An entry contains information about a Telepresence call monitoring threshold crossed event. |
| 1.3.6.1.4.1.9.9.644.1.5.3.1.1 | ColumnctpcStatEventHistoryIndex | not-accessible | current | A unique non-zero integer value that identifies a row in this table. The value of this table starts from '1' and monotonically increases for each threshold cro… |
| 1.3.6.1.4.1.9.9.644.1.5.3.1.2 | ColumnctpcStatEventMonObjectInst | read-only | current | This object specifies a complete OID of a monitoring object which was crossed. For example, the OID of ctpcAvgPeriodLatency.1.video would represent video laten… |
| 1.3.6.1.4.1.9.9.644.1.5.3.1.3 | ColumnctpcStatEventCrossedValue | read-only | current | This object specifies the value of monitoring object when the threshold was crossed. |
| 1.3.6.1.4.1.9.9.644.1.5.3.1.4 | ColumnctpcStatEventCrossedType | read-only | current | This object specifies the type of threshold which was crossed and thereby triggered this event. |
| 1.3.6.1.4.1.9.9.644.1.5.3.1.5 | ColumnctpcStatEventTimeStamp | read-only | current | This object specifies the value of the sysUpTime object at the time the notification was generated. |
| 1.3.6.1.4.1.9.9.644.1.6 | NodectpcMgmtSysConnEventHistory | |||
| 1.3.6.1.4.1.9.9.644.1.6.1 | ScalarctpcMgmtSysConnEventHistTableSize | read-write | current | This object specifies the number of entries that the ctpcMgmtSysConnEventHistoryTable can contain. When the capacity of the ctpcMgmtSysConnEventHistoryTable ha… |
| 1.3.6.1.4.1.9.9.644.1.6.2 | ScalarctpcMgmtSysConnEventHistLastIndex | read-only | current | This object specifies the value of the ctpcMgmtSysConnEventHistIndex object corresponding to the last entry added to the table by the agent. If the management … |
| 1.3.6.1.4.1.9.9.644.1.6.3 | TablectpcMgmtSysConnEventHistoryTable | not-accessible | current | This table contains a history of call management system connection state changes. After management system initialization (i.e. when sysUpTime is reset to zero)… |
| 1.3.6.1.4.1.9.9.644.1.6.3.1 | RowctpcMgmtSysConnEventHistoryEntry | not-accessible | current | An entry contains information about a call management system connection state change event. |
| 1.3.6.1.4.1.9.9.644.1.6.3.1.1 | ColumnctpcMgmtSysConnEventHistoryIndex | not-accessible | current | A unique non-zero integer value that identifies a row in this table. The value of this table starts from '1' and monotonically increases for each management sy… |
| 1.3.6.1.4.1.9.9.644.1.6.3.1.2 | ColumnctpcMgmtSysConnEventStatus | read-only | current | This object specifies a call management system connection state when the event happened. |
| 1.3.6.1.4.1.9.9.644.1.6.3.1.3 | ColumnctpcMgmtSysConnEventSIPRespCode | read-only | current | This object specifies SIP response code from call management system when the event happened. |
| 1.3.6.1.4.1.9.9.644.1.6.3.1.4 | ColumnctpcMgmtSysConnEventTimeStamp | read-only | current | This object specifies the value of the sysUpTime object at the time the notification was generated. |
| 1.3.6.1.4.1.9.9.644.2 | NodeciscoTelepresenceCallMIBConform | |||
| 1.3.6.1.4.1.9.9.644.2.1 | NodeciscoTpCallMIBCompliances | |||
| 1.3.6.1.4.1.9.9.644.2.1.1 | ComplianceciscoTpCallMIBCompliance | read-only | deprecated | The compliance statement for entities which implement the Cisco Telepresence Call MIB. |
| 1.3.6.1.4.1.9.9.644.2.1.2 | ComplianceciscoTpCallMIBComplianceRev1 | read-only | deprecated | The compliance statement for entities which implement the Cisco Telepresence Call MIB. |
| 1.3.6.1.4.1.9.9.644.2.1.3 | ComplianceciscoTpCallMIBComplianceRev2 | read-only | deprecated | The compliance statement for entities which implement the Cisco Telepresence Call MIB. |
| 1.3.6.1.4.1.9.9.644.2.1.4 | ComplianceciscoTpCallMIBComplianceRev3 | read-only | deprecated | The compliance statement for entities which implement the Cisco Telepresence Call MIB. |
| 1.3.6.1.4.1.9.9.644.2.1.5 | ComplianceciscoTpCallMIBComplianceRev4 | read-only | current | The compliance statement for entities which implement the Cisco Telepresence Call MIB. |
| 1.3.6.1.4.1.9.9.644.2.1.6 | ComplianceciscoTpCallMIBComplianceRev5 | read-only | current | The compliance statement for entities which implement the Cisco Telepresence Call MIB. |
| 1.3.6.1.4.1.9.9.644.2.2 | NodeciscoTpCallMIBGroups | |||
| 1.3.6.1.4.1.9.9.644.2.2.1 | GroupciscoTpCallConfigurationGroup | current | A collection of objects providing the call event monitoring and notification configuration. | |
| 1.3.6.1.4.1.9.9.644.2.2.2 | GroupciscoTpCallInformationGroup | current | A collection of objects providing call management system information as well as system caller ID information. | |
| 1.3.6.1.4.1.9.9.644.2.2.3 | GroupciscoTpCallStatisticsGroup | current | A collection of objects providing Telepresence call's statistical information. | |
| 1.3.6.1.4.1.9.9.644.2.2.4 | GroupciscoTpCallEventHistoryGroup | current | A collection of objects providing Telepresence call monitoring crossed event information. | |
| 1.3.6.1.4.1.9.9.644.2.2.5 | GroupciscoTpCallNotificationGroup | obsolete | A collection of event notifications. This ciscoTpCallNotificationGroup object is not used any more. | |
| 1.3.6.1.4.1.9.9.644.2.2.6 | GroupciscoTpCallMgmtSysConnEventHistGroup | current | A collection of objects providing call management system connection changes event information. | |
| 1.3.6.1.4.1.9.9.644.2.2.7 | GroupciscoTpCallInformationGroupSup1 | current | A supplemental group of ciscoTpCallInformationGroup. | |
| 1.3.6.1.4.1.9.9.644.2.2.8 | GroupciscoTpCallStatisticsGroupSup1 | current | A supplemental group of ciscoTpCallStatisticsGroup. | |
| 1.3.6.1.4.1.9.9.644.2.2.9 | GroupciscoTpCallNotificationGroupRev1 | current | A collection of event notifications. | |
| 1.3.6.1.4.1.9.9.644.2.2.10 | GroupciscoTpCallStatisticsGroupSup2 | current | A supplemental group of ciscoTpCallStatisticsGroup. | |
| 1.3.6.1.4.1.9.9.644.2.2.11 | GroupciscoTpCallStatisticsGroupSup3 | current | A supplemental group of ciscoTpCallStatisticsGroup. | |
| 1.3.6.1.4.1.9.9.644.2.2.12 | GroupciscoTpCallInformationGroupSup2 | current | A supplemental group of ciscoTpCallInformationGroup. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CtpcAttributes | BITS { interop(0), highDefinitionInterop(1), webEx(2), schedule(3), satellite(4), t1(5), liveDesk(6) } | current | The textual convention identifies the attributes or characteristics of a call. interop (0) The call involves at least one interop party. highDefinitionInterop (1) The call involves at least one high definition interop p… |
| CtpcCallTerminationCode | INTEGER { unknown(1), other(2), internalError(3), localDisconnected(4), remoteDisconnected(5), networkCongestion(6), mediaNegotiationFailure(7), securityConfigMismatched(8), incompatibleRemoteEndPt(9), serviceUnavailable(10), remoteTerminatedWithError(11), incall(12) } | current | The textual convention identifies a call termination reason. unknown (1) Call termination reason is unknown. other (2) Call termination reason is not listed. internalError (3) Telepresence system has internal system err… |
| CtpcCodecType | INTEGER { unknown(1), other(2), aaclc(3), aacld(4), g711A(5), g711U(6), g722(7), g7221(8), g728(9), g729(10), h263(11), h264(12), aacldLatm(13), h265(14) } | current | |
| CtpcE164Address | OCTET STRING (SIZE (1..32)) | current | A UTF-8 string limited to the character set defined for E.164, '0123456789*#,<quote>'. Note that <quote> represents the double quote which cannot be contained in a SMI description clause. |
| CtpcMgmtSysConnStatusCode | INTEGER { unknown(1), other(2), internalError(3), notRegister(4), registered(5), registraionFailure(6) } | current | The textual convention identifies the management system connection status. unknown (1) Call management system connection status is unknown. other (2) Call management system connection status is not listed. internalError… |
| CtpcRemoteDeviceType | INTEGER { unknown(1), other(2), audioDevice(3), videoLegacyDevice(4), highDefinitionLegacyDevice(5), singleTelepresence(6), tripleTelepresence(7), telepresenceMultipointSwitch(8), telepresenceRecordingServer(9), telepresenceTranscodingDevice(10) } | current | The textual convention identifies the remote device type of a call. unknown (1) The remote device type is not known. other (2) The remote device type is not listed. audioDevice (3) Audio device. videoLegacyDevice (4) Vi… |
| CtpcStatAlarmMode | INTEGER { risingAlarm(1), fallingAlarm(2), risingOrFallingAlarm(3) } | current | The textual convention identifies the monitoring alarm mode. risingAlarm (1) Alarm will be generated if first sample is greater than or equal to rising threshold. fallingAlarm (2) Alarm will be generated if first sample… |
| CtpcStateCode | INTEGER { unknown(1), other(2), noMgmtSysConn(3), noDialTone(4), invalidNumber(5), ringing(6), noAnswer(7), inProgress(8), remoteHold(9), shareLineActive(10), inLocalConference(11), terminatedbyError(12), localHold(13), terminatedNormally(14), answer(15), resume(16), busy(17), pause(18), playback(19), recording(20) } | current | The textual convention identifies a call state. unknown (1) The system does not know what state that the call is in. other (2) The call is in a state not listed. noMgmtSysConn (3) The call cannot be dialed out due to no… |
| CtpcStatMonitoredAttribute | INTEGER { latency(1), jitter(2), packetLoss(3), authFailurePacket(4) } | current | The textual convention identifies the monitoring type for a Telepresence call. latency (1) Round trip latency measurement. jitter (2) Jitter of incoming and/or outgoing frames. packetLoss (3) Percentage of packet loss f… |
| CtpcStatMonitoredAttributeUnit | INTEGER { milliseconds(1), micropercent(2), packets(3) } | current | The textual convention identifies a Telepresence call monitoring type's measuring unit which is milliseconds, micropercent (10^-6 percent) or number of packets. |
| CtpcStatThreshCrossedType | INTEGER { risingThreshold(1), fallingThreshold(2) } | current | The textual convention identifies the monitoring threshold cross type. risingThreshold (1) The sample data has crossed the rising threshold. fallingThreshold (2) The sample data has crossed the falling threshold. |
| CtpcStreamMediaType | INTEGER { video(1), audio(2), content(3) } | current | |
| CtpcStreamSourceType | INTEGER { secCodec1(1), priCodec(2), secCodec2(3), auxiliary1(4), secLegacy1(5), priLegacy(6), secLegacy2(7), auxiliary2(8), center(9), left(10), right(11), legacyCtr(12), legacyLeft(13), legacyRight(14), auxiliary3(15), auxiliary4(16), other(17) } | current |