CISCO-TS-STACK-MIB
224 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.32 | NodetsStack | |||
| 1.3.6.1.4.1.9.5.32.1 | NodeciscoTsMain | |||
| 1.3.6.1.4.1.9.5.32.1.1 | NodeciscoTsConfig | |||
| 1.3.6.1.4.1.9.5.32.1.1.1 | ScalarciscoTsIpAddr | read-write | mandatory | The IP address of the current Token Ring Bridge Relay Facility (TrBRF). |
| 1.3.6.1.4.1.9.5.32.1.1.1 | NodeciscoTsStackCfgChange | This trap is generated when there is a change in the stack configuration i.e. when either a new switch is added to the stack or a switch leaves a stack. ciscoT… | ||
| 1.3.6.1.4.1.9.5.32.1.1.2 | ScalarciscoTsNetMask | read-write | mandatory | The subnet mask of the current TrBRF. |
| 1.3.6.1.4.1.9.5.32.1.1.2 | NodeciscoTsStackProStackMatrixChange | This trap is generated when the stack switches over from primary to secondary Matrix or from secondary back to primary Matrix. | ||
| 1.3.6.1.4.1.9.5.32.1.1.3 | ScalarciscoTsDefaultGateway | read-write | mandatory | IP default gateway of the current TrBRF. |
| 1.3.6.1.4.1.9.5.32.1.1.4 | ScalarciscoTsSysCurTime | read-write | mandatory | Current time at the switch. To set the time use the format yyyy mm dd hh mm ss. All fields are required. Setting this object will reset the time in all the swi… |
| 1.3.6.1.4.1.9.5.32.1.1.5 | ScalarciscoTsConfiguration | read-only | mandatory | The stack configuration of the system. A system can exist in three possible configurations. 1. Stand alone mode where the system has only one switch and is not… |
| 1.3.6.1.4.1.9.5.32.1.1.6 | ScalarciscoTsNumSwitches | read-only | mandatory | Total number of switches in the stack. |
| 1.3.6.1.4.1.9.5.32.1.1.7 | ScalarciscoTsStackStatus | read-only | mandatory | Stack status indicates if the stack is going through the Stack Management Update protocol. Management stations should check this status if they receive a genEr… |
| 1.3.6.1.4.1.9.5.32.1.1.8 | ScalarciscoTsTftpServer | read-write | mandatory | TFTP sever's IP address. |
| 1.3.6.1.4.1.9.5.32.1.1.9 | ScalarciscoTsTftpServerTrBRF | read-write | mandatory | TrBRF to which the server is connected. |
| 1.3.6.1.4.1.9.5.32.1.1.10 | ScalarciscoTsTftpFileLoc | read-write | mandatory | Path and filename of the binary file on the server. |
| 1.3.6.1.4.1.9.5.32.1.1.11 | ScalarciscoTsTftpDownload | read-write | mandatory | Setting this to any number between 1 and 8 starts a TFTP download for that box. Setting this to 9 starts a TFTP download for all boxes in a stack. This object … |
| 1.3.6.1.4.1.9.5.32.1.1.12 | ScalarciscoTsTftpDownloadStatus | read-only | mandatory | Reading complete(2) from this object means the write to flash has succeeded and the switch is ready to be rebooted. |
| 1.3.6.1.4.1.9.5.32.1.1.13 | ScalarciscoTsProStackMatrixStatus | read-only | mandatory | Status of the Active Matrix module in the stack. This object is set to none(3) if the switch is not connected to a Matrix. |
| 1.3.6.1.4.1.9.5.32.1.1.14 | ScalarciscoTsNumMatrixModules | read-only | mandatory | Number of Matrix modules in the stack. This object is set to zero if the switch is not connected to a Matrix. |
| 1.3.6.1.4.1.9.5.32.1.1.15 | ScalarciscoTsStackReset | read-write | mandatory | Operational status of the controlling switch in the stack. Setting this value to either coldReset(2) or warmReset(3) will cause all boxes in the stack to cold … |
| 1.3.6.1.4.1.9.5.32.1.1.16 | ScalarciscoTsStackRMONStatistics | read-write | mandatory | Used to enable or disable the collection of RMON statistics on the switch/stack. After changing the state of this object, the switch must be rebooted for the c… |
| 1.3.6.1.4.1.9.5.32.1.1.25 | TableciscoTsTrapRcvrTable | not-accessible | mandatory | Trap Receiver Table for each TrBRF. |
| 1.3.6.1.4.1.9.5.32.1.1.25.1 | RowciscoTsTrapRcvrEntry | not-accessible | mandatory | Definition of each row in the TrBRF specific trap receiver table. |
| 1.3.6.1.4.1.9.5.32.1.1.25.1.1 | ColumnciscoTsTrapRcvrIndex | read-only | mandatory | Trap receiver index for each entry. The switch only allows 20 entries into this table. |
| 1.3.6.1.4.1.9.5.32.1.1.25.1.2 | ColumnciscoTsTrapRcvrStatus | read-write | mandatory | Setting the value of this object to invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. Setting this value to cr… |
| 1.3.6.1.4.1.9.5.32.1.1.25.1.3 | ColumnciscoTsTrapRcvrIpAddress | read-write | mandatory | IP address for an SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.9.5.32.1.1.25.1.4 | ColumnciscoTsTrapRcvrComm | read-write | mandatory | Community string to use in outgoing traps. |
| 1.3.6.1.4.1.9.5.32.1.1.25.1.5 | ColumnciscoTsTrapRcvrTrBRFs | read-write | mandatory | TrBRFs on which traps to this target are sent. Each octet within the value of this object specifies a set of eight TrBRFs, with the first octet specifying TrBR… |
| 1.3.6.1.4.1.9.5.32.2 | NodeciscoTsStack | |||
| 1.3.6.1.4.1.9.5.32.2.1 | TableciscoTsStackTable | not-accessible | mandatory | Stack information table. This table provides the current configuration of the stack. It also provides a mapping of Switch Numbers to their addresses. There is … |
| 1.3.6.1.4.1.9.5.32.2.1.1 | RowciscoTsStackEntry | not-accessible | mandatory | Definition of each row in the Stack Table |
| 1.3.6.1.4.1.9.5.32.2.1.1.1 | ColumnciscoTsStackSwitchNumber | read-only | mandatory | Switch number as determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches … |
| 1.3.6.1.4.1.9.5.32.2.1.1.2 | ColumnciscoTsStackSwitchBIAddr | read-only | mandatory | The burned in MAC address of the switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.3 | ColumnciscoTsStackSwitchLAAddr | read-write | mandatory | The locally administered MAC address of the switch. After writing to this object, you must reset the switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.4 | ColumnciscoTsStackSwitchFwVersion | read-only | mandatory | Version number for the firmware running on the switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.5 | ColumnciscoTsStackSwitchHwVersion | read-only | mandatory | Hardware version number for the switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.6 | ColumnciscoTsStackSwitchUptime | read-only | mandatory | Time ticks since the switch was last reset. |
| 1.3.6.1.4.1.9.5.32.2.1.1.7 | ColumnciscoTsStackSwitchStatus | read-write | mandatory | Operational status of the box. Setting this value to either coldReset(2) or warmReset(3) will cause cold start or warm start to occur after a predefined time d… |
| 1.3.6.1.4.1.9.5.32.2.1.1.8 | ColumnciscoTsStackSwitchTemperature | read-only | mandatory | Temperature of each switch reported in degrees Celsius. |
| 1.3.6.1.4.1.9.5.32.2.1.1.9 | ColumnciscoTsStackSwitchMemory | read-only | mandatory | Installed memory on the switch in MB. |
| 1.3.6.1.4.1.9.5.32.2.1.1.10 | ColumnciscoTsStackSwitchSPANPort | read-write | mandatory | Port number to be used for the Switch Port Analyzer. Setting this object to zero turns off the SPAN function. |
| 1.3.6.1.4.1.9.5.32.2.1.1.11 | ColumnciscoTsStackSwitchSPANMonitoredPort | read-write | mandatory | Port monitored by the SPAN function. |
| 1.3.6.1.4.1.9.5.32.2.1.1.12 | ColumnciscoTsStackSwitchFeatureStatus | read-only | mandatory | This object indicates whether the switch is enabled to support enhanced features. |
| 1.3.6.1.4.1.9.5.32.2.1.1.13 | ColumnciscoTsStackSwitchFeatureKey | read-write | mandatory | Feature key to enable enhanced features. See the manual for information pertaining to enabling possible enhanced features. |
| 1.3.6.1.4.1.9.5.32.2.1.1.14 | ColumnciscoTsStackSwitchPorts | read-only | mandatory | A bit mask representing all the ports present in this switch. Each octet within the value of this object specifies a set of eight ports, with the first octet s… |
| 1.3.6.1.4.1.9.5.32.2.1.1.15 | ColumnciscoTsStackSwitchAgingTime | read-write | mandatory | Aging time in minutes for the master address table entries on this switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.16 | ColumnciscoTsStackSwitchAgingLevel | read-write | mandatory | Threshold to demand age the master address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,9… |
| 1.3.6.1.4.1.9.5.32.2.1.1.18 | ColumnciscoTsStackSwitchXmitFrames | read-only | mandatory | Frames transmitted by the CPU. |
| 1.3.6.1.4.1.9.5.32.2.1.1.19 | ColumnciscoTsStackSwitchRcvdFrames | read-only | mandatory | Frames received for processing by the CPU. |
| 1.3.6.1.4.1.9.5.32.2.1.1.20 | ColumnciscoTsStackSwitchRcvdErrFrames | read-only | mandatory | Error frames received by the CPU. |
| 1.3.6.1.4.1.9.5.32.2.1.1.21 | ColumnciscoTsStackSwitchLostFrames | read-only | mandatory | Frames lost by the CPU while trying to transmit. |
| 1.3.6.1.4.1.9.5.32.2.1.1.22 | ColumnciscoTsStackSwitchPendingSendRqsts | read-only | mandatory | Frames queued in the CPU's transmit buffer. |
| 1.3.6.1.4.1.9.5.32.2.1.1.23 | ColumnciscoTsStackSwitchXmitErrFrames | read-only | mandatory | Frames in error due to buffer overflows or drops in the CPU. |
| 1.3.6.1.4.1.9.5.32.2.1.1.24 | ColumnciscoTsStackSwitchCurrActStations | read-only | mandatory | The number of station address entries currently active in the switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.25 | ColumnciscoTsStackSwitchLargestNumStations | read-only | mandatory | The largest number of active stations ever seen on the switch since the last reboot, or clearing of statistics. |
| 1.3.6.1.4.1.9.5.32.2.1.1.26 | ColumnciscoTsStackSwitchMaxAddressChain | read-only | mandatory | The longest chain of addresses anywhere in the CPU's address hash table. |
| 1.3.6.1.4.1.9.5.32.2.1.1.27 | ColumnciscoTsStackSwitchAddressTblFulls | read-only | mandatory | The number of times a hash table chain has filled up. |
| 1.3.6.1.4.1.9.5.32.2.1.1.28 | ColumnciscoTsStackSwitchId | read-only | mandatory | The object ID used to uniquely identify the type of Cisco token ring switch. |
| 1.3.6.1.4.1.9.5.32.2.1.1.29 | ColumnciscoTsStackSwitchSPANMonitoredTrCRFs | read-write | mandatory | Token Ring Concentrator Facilities (TrCRFs) for which traffic on the port specified by ciscoTsStackSwitchSPANMonitoredPort should be monitored. Individual TrCR… |
| 1.3.6.1.4.1.9.5.32.2.1.1.30 | ColumnciscoTsStackSwitchPwrSupplyStatus | read-only | mandatory | The status of the power supply of the switch. The values have the following meanings: unknown(1) : The status is not known. internal-only(2) : The switch is no… |
| 1.3.6.1.4.1.9.5.32.2.3 | NodeciscoTsStackTempChange | This trap is generated when the temperature in a switch exceeds normal or returns to normal. | ||
| 1.3.6.1.4.1.9.5.32.2.4 | NodeciscoTsStackPwrStatusChange | This trap is generated when the status of the power supply changes. | ||
| 1.3.6.1.4.1.9.5.32.3 | NodeciscoTsModule | |||
| 1.3.6.1.4.1.9.5.32.3.1 | TableciscoTsModTable | not-accessible | mandatory | Module configuration table. There is one entry in the table for each module in a stack. Entries cannot be administratively created/deleted. |
| 1.3.6.1.4.1.9.5.32.3.1.1 | RowciscoTsModEntry | not-accessible | mandatory | Definition of each row in the Module Table |
| 1.3.6.1.4.1.9.5.32.3.1.1.1 | ColumnciscoTsModSwitchNumber | read-only | mandatory | Switch number as determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches … |
| 1.3.6.1.4.1.9.5.32.3.1.1.2 | ColumnciscoTsModNumber | read-only | mandatory | The module number. |
| 1.3.6.1.4.1.9.5.32.3.1.1.3 | ColumnciscoTsModState | read-only | mandatory | The state indicates the current operational state of the module. |
| 1.3.6.1.4.1.9.5.32.3.1.1.4 | ColumnciscoTsModType | read-only | mandatory | The type of module plugged in to the slot. Module type system(1) represents the mother board with the CPU and system memory. Module state none(10) represents a… |
| 1.3.6.1.4.1.9.5.32.3.1.1.5 | ColumnciscoTsModRevision | read-only | mandatory | The module revision number. |
| 1.3.6.1.4.1.9.5.32.3.1.1.6 | ColumnciscoTsModFwVer | read-only | mandatory | The module's firmware version. |
| 1.3.6.1.4.1.9.5.32.3.1.1.7 | ColumnciscoTsModNumPorts | read-only | mandatory | Total number of ports in the module. |
| 1.3.6.1.4.1.9.5.32.3.1.1.8 | ColumnciscoTsModUptime | read-only | mandatory | Time ticks since the module was last reset. |
| 1.3.6.1.4.1.9.5.32.4 | NodeciscoTsPort | |||
| 1.3.6.1.4.1.9.5.32.4.1 | TableciscoTsPortCfgTable | not-accessible | mandatory | A table of configuration information about each port. There is one entry for each port in a stack. Entries cannot be administratively created/deleted. |
| 1.3.6.1.4.1.9.5.32.4.1 | NodeciscoTsPortStrNFwdEntry | This trap is generated when a port automatically enters store and forward mode when the error rate exceeds the threshold. | ||
| 1.3.6.1.4.1.9.5.32.4.1.1 | RowciscoTsPortCfgEntry | not-accessible | mandatory | Definition of rows in the port configuration table. |
| 1.3.6.1.4.1.9.5.32.4.1.1.1 | ColumnciscoTsPortCfgNumber | read-only | mandatory | A unique value for each port entry. The value corresponds the port number. |
| 1.3.6.1.4.1.9.5.32.4.1.1.2 | ColumnciscoTsPortCfgModNumber | read-only | mandatory | Module number of the module that contains this port. |
| 1.3.6.1.4.1.9.5.32.4.1.1.3 | ColumnciscoTsPortCfgIfIndex | read-only | mandatory | A pointer to the entry in the ifTable corresponding to this port. |
| 1.3.6.1.4.1.9.5.32.4.1.1.4 | ColumnciscoTsPortCfgResetStats | read-write | mandatory | Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of ciscoTsPortStatsResetTimer is set to zero. |
| 1.3.6.1.4.1.9.5.32.4.1.1.5 | ColumnciscoTsPortCfgResetAddrs | read-write | mandatory | Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting ciscoTsPortStat… |
| 1.3.6.1.4.1.9.5.32.4.1.1.6 | ColumnciscoTsPortCfgAddrAgingTime | read-write | mandatory | Port level address aging time in minutes. Setting this object to zero disables address aging. |
| 1.3.6.1.4.1.9.5.32.4.1.1.7 | ColumnciscoTsPortCfgDemandAgingLevel | read-write | mandatory | Threshold to demand age the port address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 … |
| 1.3.6.1.4.1.9.5.32.4.1.1.8 | ColumnciscoTsPortCfgErrLoThreshold | read-write | mandatory | Lower error rate threshold which causes the port to transition from store and forward mode to cut-through mode. |
| 1.3.6.1.4.1.9.5.32.4.1.1.9 | ColumnciscoTsPortCfgErrHiThreshold | read-write | mandatory | Upper error rate threshold which causes the port to transition from cut-through mode to store and forward mode. |
| 1.3.6.1.4.1.9.5.32.4.1.1.10 | ColumnciscoTsPortCfgErrSampling | read-write | mandatory | Error sampling interval in minutes. |
| 1.3.6.1.4.1.9.5.32.4.1.1.11 | ColumnciscoTsPortCfgMaxTransmitUnit | read-write | mandatory | MTU size. The valid values for this object are 1500, 4472, 8144 and 17800. The value specified cannot exceed the vtpVlanMTU (see Cisco VTP MIB) for the TrBRF t… |
| 1.3.6.1.4.1.9.5.32.4.1.1.12 | ColumnciscoTsPortCfgMaxExplorerRate | read-write | mandatory | Explorer frame forwarding rate per second throttle. A value of (-1) disables explorer frame throttling. |
| 1.3.6.1.4.1.9.5.32.4.1.1.13 | ColumnciscoTsPortCfgSetACbits | read-write | mandatory | Specifies if the AC bits shall be set unconditionally when a port forwards certain LLC frames. |
| 1.3.6.1.4.1.9.5.32.4.1.1.14 | ColumnciscoTsPortCfgEarlyTokenRlse | read-write | mandatory | Early token release operation. |
| 1.3.6.1.4.1.9.5.32.4.1.1.15 | ColumnciscoTsPortCfgForwardingMode | read-write | mandatory | Operational frame switching mode for the port. When in auto mode the port uses the Direct Cut algorithm to place the port in either cutthru(3) or storeandforwa… |
| 1.3.6.1.4.1.9.5.32.4.1.1.16 | ColumnciscoTsPortCfgActualForwardingMode | read-only | mandatory | Actual operational frame switching mode for the port. |
| 1.3.6.1.4.1.9.5.32.4.1.1.17 | ColumnciscoTsPortCfgPortMode | read-write | mandatory | Port operation mode. Only the HDX and FDX modes can be auto detected. Note, that passive-probe(7) mode can not be set with this object. The passive-probe(7) mo… |
| 1.3.6.1.4.1.9.5.32.4.1.1.18 | ColumnciscoTsPortCfgActualPortMode | read-only | mandatory | The actual port operation mode. If the port is in auto mode, this object will return the mode that the port opened in. |
| 1.3.6.1.4.1.9.5.32.4.1.1.19 | ColumnciscoTsPortCfgPriorityThres | read-write | mandatory | The highest token-ring frame priority that shall go to the low-priority transmit queue. |
| 1.3.6.1.4.1.9.5.32.4.1.1.20 | ColumnciscoTsPortCfgMinXmitPriority | read-write | mandatory | The minimum token priority that will be used for transmit. |
| 1.3.6.1.4.1.9.5.32.4.1.1.21 | ColumnciscoTsPortCfgCfgLossThres | read-write | mandatory | Number of configuration loss events (described in TsPortCfgLossRC) during the sample period which, if exceeded, should cause the port to be disabled. If the po… |
| 1.3.6.1.4.1.9.5.32.4.1.1.22 | ColumnciscoTsPortCfgCfgLossInterval | read-write | mandatory | The sampling period, in minutes, for which the port monitors to determine if the configuration loss threshold has been exceeded. |
| 1.3.6.1.4.1.9.5.32.4.1.1.23 | ColumnciscoTsPortCfgBcastSuppresion | read-write | mandatory | The number of broadcast frames per second allowed to be forwarded by this port. Any broadcast frames exceeding this watermark will not be forwarded by the port… |
| 1.3.6.1.4.1.9.5.32.4.1.1.24 | ColumnciscoTsPortCfgCDPTimeToLive | read-write | mandatory | The advertised time-to-live parameter on all CDP messages generated by this switch on this port. |
| 1.3.6.1.4.1.9.5.32.4.1.1.25 | ColumnciscoTsPortCfgSpanningTreeMode | read-write | mandatory | Used when configuring manual spanning tree. Setting this object to forwarding(2) or blocking(3) overrides the TrCRF's spanning tree's algorithm for this port. |
| 1.3.6.1.4.1.9.5.32.4.1.1.26 | ColumnciscoTsPortCfgSecurityMode | read-write | mandatory | Port security mode is used to disable address learning at a port where an allow-source or allow-destination MAC address filter is configured. A value of normal… |
| 1.3.6.1.4.1.9.5.32.4.1.1.27 | ColumnciscoTsPortCfgSoftErrThreshold | read-write | mandatory | The number of soft errors reported from a station connected to this port which, if exceeded, should cause a soft error exceeded trap to be issued. The error co… |
| 1.3.6.1.4.1.9.5.32.4.1.1.28 | ColumnciscoTsPortCfgSoftErrReportInterval | read-write | mandatory | The sampling period, in seconds, in which each station connected to this port will be monitored for excessive soft error reports. If a station reports more tha… |
| 1.3.6.1.4.1.9.5.32.4.1.1.29 | ColumnciscoTsPortCfgSoftErrorMonitoring | read-write | mandatory | Used to enable or disable, for this port, the collection of soft error statistics and the sending of traps when the configured error threshold is exceeded. If … |
| 1.3.6.1.4.1.9.5.32.4.2 | NodeciscoTsPortCfgLossTrap | This trap occurs when a port is disabled because it has exceeded its Configuration Loss Threshold within the configured Sampling Period. | ||
| 1.3.6.1.4.1.9.5.32.4.2 | TableciscoTsPortStatsTable | not-accessible | mandatory | A table of statistical information about each port. There is one entry for each port in a stack. Entries cannot be administratively created/deleted |
| 1.3.6.1.4.1.9.5.32.4.2.1 | RowciscoTsPortStatsEntry | not-accessible | mandatory | Definition of rows in the port statistics table. |
| 1.3.6.1.4.1.9.5.32.4.2.1.1 | ColumnciscoTsPortStatsNumber | read-only | mandatory | A unique value for each port entry. The value corresponds the port number. |
| 1.3.6.1.4.1.9.5.32.4.2.1.2 | ColumnciscoTsPortStatsModNumber | read-only | mandatory | Module number of the module that contains this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.3 | ColumnciscoTsPortStatsIfIndex | read-only | mandatory | A pointer to the entry in the ifTable corresponding to this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.4 | ColumnciscoTsPortStatsRcvLocalFrames | read-only | mandatory | Number of frames received where the destination station address is on this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.5 | ColumnciscoTsPortStatsForwardedFrames | read-only | mandatory | Number of frames received on this port and forwarded to another port or to the system module for processing. |
| 1.3.6.1.4.1.9.5.32.4.2.1.6 | ColumnciscoTsPortStatsStations | read-only | mandatory | Number of active stations in the address table for this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.7 | ColumnciscoTsPortStatsSWHandledFrames | read-only | mandatory | Number of frames received on this port and delivered to the system module for processing. |
| 1.3.6.1.4.1.9.5.32.4.2.1.8 | ColumnciscoTsPortStatsLocalStations | read-only | mandatory | Number of stations on this port which belong to the local segment. |
| 1.3.6.1.4.1.9.5.32.4.2.1.9 | ColumnciscoTsPortStatsRemoteStations | read-only | mandatory | Number of stations on this port which belong to another segment. |
| 1.3.6.1.4.1.9.5.32.4.2.1.10 | ColumnciscoTsPortStatsUnknownStaFrames | read-only | mandatory | Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in th… |
| 1.3.6.1.4.1.9.5.32.4.2.1.11 | ColumnciscoTsPortStatsResetTimer | read-only | mandatory | Time (in 100th second ticks) since the port counters were reset. |
| 1.3.6.1.4.1.9.5.32.4.2.1.12 | ColumnciscoTsPortStatsInFrames | read-only | mandatory | Total number of frames received on this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.13 | ColumnciscoTsPortStatsOutFrames | read-only | mandatory | Total number of frames transmitted by this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.14 | ColumnciscoTsPortStatsLongFrames | read-only | mandatory | Total number of frames received on this port which were too long. |
| 1.3.6.1.4.1.9.5.32.4.2.1.15 | ColumnciscoTsPortStatsShortFrames | read-only | mandatory | Total number of frames received on this port which were too short. |
| 1.3.6.1.4.1.9.5.32.4.2.1.16 | ColumnciscoTsPortStatsInBufOverflows | read-only | mandatory | Total number of frames received on this port which caused a receive buffer overflow. |
| 1.3.6.1.4.1.9.5.32.4.2.1.17 | ColumnciscoTsPortStatsOutBufOverflows | read-only | mandatory | Total number of frames which could not be transmitted from this port because of transmit buffer overflow. |
| 1.3.6.1.4.1.9.5.32.4.2.1.18 | ColumnciscoTsPortStatsRcvBcasts | read-only | mandatory | Number of broadcast frames received on this port without errors. |
| 1.3.6.1.4.1.9.5.32.4.2.1.19 | ColumnciscoTsPortStatsRcvMcasts | read-only | mandatory | Number of multicast frames received on this port without errors. |
| 1.3.6.1.4.1.9.5.32.4.2.1.20 | ColumnciscoTsPortStatsSwitchedFrames | read-only | mandatory | Number of frames switched on this port. |
| 1.3.6.1.4.1.9.5.32.4.2.1.21 | ColumnciscoTsPortStatsPktsInErrors | read-only | mandatory | Total number of packets received or transmitted from this port in which there was an error. |
| 1.3.6.1.4.1.9.5.32.4.2.1.22 | ColumnciscoTsPortStatsAddrChainOverflows | read-only | mandatory | Number of times an address chain was full when trying to add an entry to the port address table. |
| 1.3.6.1.4.1.9.5.32.4.2.1.23 | ColumnciscoTsPortStatsTableOverflows | read-only | mandatory | Number of times the address table was full when trying to add an entry to the port address table. |
| 1.3.6.1.4.1.9.5.32.4.2.1.24 | ColumnciscoTsPortStatsCfgLoss | read-only | mandatory | Number of events, as described in ciscoTsPortCfgLossRC, after the port has completed the join process and then lost communication. |
| 1.3.6.1.4.1.9.5.32.4.2.1.25 | ColumnciscoTsPortStatsCfgLossRC | read-only | mandatory | Reason code describing the cause of the latest configuration loss. A value of no-cfg-loss(7) will be returned when there has not been a configuration loss. |
| 1.3.6.1.4.1.9.5.32.4.2.1.26 | ColumnciscoTsPortStatsTrCRF | read-only | mandatory | The TrCRF or TrCRFs that a port is assigned to. Only trunk ports such as ISL and ATM can be members of multiple TrCRFs. Each octet within the value of this obj… |
| 1.3.6.1.4.1.9.5.32.4.2.1.27 | ColumnciscoTsPortStatsAutoDisableRC | read-only | mandatory | Reason code describing the cause for a port having been disabled by the switch software. A value of not-disabled(1) will be returned when the port has not been… |
| 1.3.6.1.4.1.9.5.32.4.3 | NodeciscoTsBeaconStart | This trap is generated when a port or a station local to a port begins to beacon. It is sent out only when a ring status change indicates that a station is bea… | ||
| 1.3.6.1.4.1.9.5.32.4.4 | NodeciscoTsBeaconEnd | This trap is generated when the ring status change indicates that a ring is no longer beaconing. This trap only occurs only once when the status actually chang… | ||
| 1.3.6.1.4.1.9.5.32.4.5 | NodeciscoTsDuplicateMACAddr | This trap is generated when a duplicate MAC address is detected on a port in a TrCRF which already has learned that MAC address. | ||
| 1.3.6.1.4.1.9.5.32.4.6 | NodeciscoTsPortSoftErrExceededTrap | This trap is generated when a station local to a port exceeds its Soft Error Threshold within the configured interval. | ||
| 1.3.6.1.4.1.9.5.32.5 | NodeciscoTsProbe | |||
| 1.3.6.1.4.1.9.5.32.5.1 | TableciscoTsPassiveProbeTable | not-accessible | mandatory | Passive probe port configuration table. There are always two entries in the table. These entries cannot be administratively deleted and no rows can be created. |
| 1.3.6.1.4.1.9.5.32.5.1.1 | RowciscoTsPassiveProbeEntry | not-accessible | mandatory | Definition of each row in the table. |
| 1.3.6.1.4.1.9.5.32.5.1.1.1 | ColumnciscoTsPassiveProbeIndex | read-only | mandatory | Index into the Passive Probe port table. The following table describes the configuration options for the ciscoTsPassiveProbeTable. The PortMode column represen… |
| 1.3.6.1.4.1.9.5.32.5.1.1.2 | ColumnciscoTsPassiveProbePort | read-write | mandatory | The port that is configured to mirror traffic from another port in the switch. This is the port to which you can connect an RMON probe. Setting this object to … |
| 1.3.6.1.4.1.9.5.32.5.1.1.3 | ColumnciscoTsPassiveProbeMonitoredPort | read-write | mandatory | The port that will have its traffic mirrored onto the probe port. Set this object to a non-zero value to have that port's traffic copied to the monitoring port… |
| 1.3.6.1.4.1.9.5.32.5.1.1.4 | ColumnciscoTsPassiveProbeDirection | read-only | mandatory | Direction of traffic flow that is being monitored. |
| 1.3.6.1.4.1.9.5.32.6 | NodeciscoTsVLANS | |||
| 1.3.6.1.4.1.9.5.32.6.1 | TableciscoTsTrCRFInfoTable | not-accessible | mandatory | TrCRF information table. There is one entry for each TrCRF in a stack. Entries are administratively created and deleted via the vtpEditControlTable. |
| 1.3.6.1.4.1.9.5.32.6.1 | NodeciscoTsTrCRFNewRoot | This trap is a TrCRF specific version of the newRoot trap as described in RFC1493. The newRoot trap indicates that the sending agent has become the new root of… | ||
| 1.3.6.1.4.1.9.5.32.6.1.1 | RowciscoTsTrCRFInfoEntry | not-accessible | mandatory | Definition of each row in the TrCRF Table |
| 1.3.6.1.4.1.9.5.32.6.1.1.1 | ColumnciscoTsTrCRFInfoTrCRFNumber | read-only | mandatory | Unique identifier for this entry in the TrCRF table. Corresponds to the TrCRF number. It is also the index into the vtpVLANEntry table which is in the VTP MIB. |
| 1.3.6.1.4.1.9.5.32.6.1.1.2 | ColumnciscoTsTrCRFInfoName | read-only | mandatory | User defined name of the TrCRF. The name can only be set in the VTP MIB. |
| 1.3.6.1.4.1.9.5.32.6.1.1.3 | ColumnciscoTsTrCRFInfoSpanningTreeProtoSpecification | read-write | mandatory | The Spanning Tree Protocol to run on this TrCRF. |
| 1.3.6.1.4.1.9.5.32.6.1.1.4 | ColumnciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay | read-write | mandatory | The value used as the Forwarding Delay in this TrCRF. The range for this parameter is 400 to 3000 and is related to the value of dtrSpanningTreeBridgeMaxAge. S… |
| 1.3.6.1.4.1.9.5.32.6.1.1.5 | ColumnciscoTsTrCRFInfoSpanningTreeBridgeHelloTime | read-write | mandatory | The value to be used as the Hello Time in this TrCRF. The range for this parameter is 100 to 1000. The granularity of this timer is specified to be 1/100 of a … |
| 1.3.6.1.4.1.9.5.32.6.1.1.6 | ColumnciscoTsTrCRFInfoSpanningTreeBridgeMaxAge | read-write | mandatory | The value to be used as the Max Age in this TrCRF. The range for this parameter is 600 to 4000 and is related to the value of dtrSpanningTreeBridgeHelloTime. S… |
| 1.3.6.1.4.1.9.5.32.6.1.1.7 | ColumnciscoTsTrCRFInfoSpanningTreeInternalPortMode | read-write | mandatory | Used when configuring manual spanning tree. Setting this object to forwarding(2) or blocking(3) overrides the spanning tree's algorithm for TrCRF's logical int… |
| 1.3.6.1.4.1.9.5.32.6.2 | TableciscoTsTrBRFInfoTable | not-accessible | mandatory | TrBRF information table. There is one entry for each TrBRF in a stack. Entries are administratively created and deleted via the vtpEditControlTable. |
| 1.3.6.1.4.1.9.5.32.6.2 | NodeciscoTsTrCRFTopologyChange | This trap is a TrCRF specific version of the topologyChange trap as described in RFC1493. A topologyChange trap is sent by a bridge when any of its configured … | ||
| 1.3.6.1.4.1.9.5.32.6.2.1 | RowciscoTsTrBRFInfoEntry | not-accessible | mandatory | Definition of each row in the TrBRF Table |
| 1.3.6.1.4.1.9.5.32.6.2.1.1 | ColumnciscoTsTrBRFInfoTrBRFNumber | read-only | mandatory | Unique identifier for this entry in the TrBRF table. Corresponds to the TrBRF number. It is also the index into the vtpVLANEntry table which is in the VTP MIB. |
| 1.3.6.1.4.1.9.5.32.6.2.1.2 | ColumnciscoTsTrBRFInfoName | read-only | mandatory | User defined name of the TrBRF. The name can only be set in the VTP MIB. |
| 1.3.6.1.4.1.9.5.32.6.2.1.3 | ColumnciscoTsTrBRFInfoIpState | read-write | mandatory | IP configuration for this TrBRF. |
| 1.3.6.1.4.1.9.5.32.6.2.1.4 | ColumnciscoTsTrBRFInfoIpAddress | read-write | mandatory | IP Address assigned to this TrBRF. Changes to the IP Address of the TrBRF to which the management station belongs cause loss of connectivity until the manageme… |
| 1.3.6.1.4.1.9.5.32.6.2.1.5 | ColumnciscoTsTrBRFInfoIpSubnetMask | read-write | mandatory | The subnet mask for this TrBRF. |
| 1.3.6.1.4.1.9.5.32.6.2.1.6 | ColumnciscoTsTrBRFInfoIpDefaultGateway | read-write | mandatory | The IP Address of the default gateway for this TrBRF. |
| 1.3.6.1.4.1.9.5.32.6.2.1.7 | ColumnciscoTsTrBRFInfoStpMode | read-write | mandatory | This object is used to enable or disable the Spanning Tree Protocol for this TrBRF. |
| 1.3.6.1.4.1.9.5.32.6.2.1.8 | ColumnciscoTsTrBRFInfoIEEEStpUsesBridgeFuncAddr | read-write | mandatory | Enables the IEEE Spanning Tree Protocol at the TrBRF level to use the IBM bridge functional address instead of the default IEEE functional address. |
| 1.3.6.1.4.1.9.5.32.6.3 | NodeciscoTsTrBRFNewRoot | This trap is a TrBRF specific version of the newRoot trap as described in RFC1493. The newRoot trap indicates that the sending agent has become the new root of… | ||
| 1.3.6.1.4.1.9.5.32.6.3 | ScalarciscoTsTransitedConfiguredTrCRFs | read-write | mandatory | A string of octets containing one bit per TrCRF in the management domain. The first octet corresponds to TrCRFs with ciscoTsTrCRFInfoTrCRFNumber 1 through 8; t… |
| 1.3.6.1.4.1.9.5.32.6.4 | NodeciscoTsTrBRFTopologyChange | This trap is a TrBRF specific version of the topologyChange trap as described in RFC1493. A topologyChange trap is sent by a bridge when any of its configured … | ||
| 1.3.6.1.4.1.9.5.32.6.4 | ScalarciscoTsTransitedTrCRFs | read-only | mandatory | A string of octets containing one bit per TrCRF in the management domain. The first octet corresponds to TrCRFs with ciscoTsTrCRFInfoTrCRFNumber 1 through 8; t… |
| 1.3.6.1.4.1.9.5.32.6.5 | ScalarciscoTsTransitedConfiguredTrBRFs | read-write | mandatory | A string of octets containing one bit per TrBRF in the management domain. The first octet corresponds to TrBRFs with ciscoTsTrBRFInfoTrBRFNumber 1 through 8; t… |
| 1.3.6.1.4.1.9.5.32.6.6 | ScalarciscoTsTransitedTrBRFs | read-only | mandatory | A string of octets containing one bit per TrBRF in the management domain. The first octet corresponds to TrBRFs with ciscoTsTrBRFInfoTrBRFNumber 1 through 8; t… |
| 1.3.6.1.4.1.9.5.32.7 | NodeciscoTsTChannel | |||
| 1.3.6.1.4.1.9.5.32.7.1 | TableciscoTsTCTable | not-accessible | mandatory | The TokenChannel table. There are always eight entries in the table, one for each possible channel. These entries cannot be administratively deleted and no ent… |
| 1.3.6.1.4.1.9.5.32.7.1 | NodeciscoTsTokenChannelFailed | This trap is sent when one of the links in an TokenChannel fail. The variable ciscoTsTCPorts contains the ports which are operational in the TokenChannel. | ||
| 1.3.6.1.4.1.9.5.32.7.1.1 | RowciscoTsTCEntry | not-accessible | mandatory | Definition of each row in the TokenChannel table. |
| 1.3.6.1.4.1.9.5.32.7.1.1.1 | ColumnciscoTsTCSwitchNumber | read-only | mandatory | Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are… |
| 1.3.6.1.4.1.9.5.32.7.1.1.2 | ColumnciscoTsTCNumber | read-only | mandatory | The unique identifier for this row. Corresponds to the TokenChannel number. |
| 1.3.6.1.4.1.9.5.32.7.1.1.3 | ColumnciscoTsTCPorts | read-write | mandatory | The set of ports in this switch which are active in this channel. Each octet within the value of this object specifies a set of eight ports, with the first oct… |
| 1.3.6.1.4.1.9.5.32.7.1.1.4 | ColumnciscoTsTCStatus | read-only | mandatory | The current running status of the channel. |
| 1.3.6.1.4.1.9.5.32.7.1.1.5 | ColumnciscoTsTCActivePorts | read-only | mandatory | The set of ports in this switch which are active in this channel. Each octet within the value of this object specifies a set of eight ports, with the first oct… |
| 1.3.6.1.4.1.9.5.32.7.2 | NodeciscoTsTokenChannelStatus | This trap is sent to report a TokenChannel or ISLChannel status change. The variable ciscoTsTCStatus contains the current channel status. The variable ciscoTsT… | ||
| 1.3.6.1.4.1.9.5.32.8 | NodeciscoTsFilter | |||
| 1.3.6.1.4.1.9.5.32.8.1 | TableciscoTsProtocolClassFilterTable | not-accessible | mandatory | DSAP and SNAP Filter Class table. This table is global for the entire stack. |
| 1.3.6.1.4.1.9.5.32.8.1.1 | RowciscoTsProtocolClassFilterEntry | not-accessible | mandatory | Definition of each row in the filter class table. There are 15 entries in the table, one for each protocol class. These entries cannot be administratively dele… |
| 1.3.6.1.4.1.9.5.32.8.1.1.1 | ColumnciscoTsProtocolClassFilterIndex | read-only | mandatory | Protocol class table index. |
| 1.3.6.1.4.1.9.5.32.8.1.1.2 | ColumnciscoTsProtocolClassFilterEtype | read-write | mandatory | This is the two byte ether-type for this protocol class. Only one ether type may be set per protocol class. Setting an illegal ether type will result in a 'bad… |
| 1.3.6.1.4.1.9.5.32.8.1.1.3 | ColumnciscoTsProtocolClassFilterDSAPs | read-write | mandatory | This is the list of DSAPs associated with a protocol class. Up to sixteen DSAPs may be specified per protocol class. If any DSAP is an illegal value the entire… |
| 1.3.6.1.4.1.9.5.32.8.2 | TableciscoTsProtocolFilterTable | not-accessible | mandatory | DSAP and SNAP Filter table. This table allows you to assign protocol classes and settings for each port. There is one entry in the table for each protocol clas… |
| 1.3.6.1.4.1.9.5.32.8.2.1 | RowciscoTsProtocolFilterEntry | not-accessible | mandatory | Definition of each row in the filter table. |
| 1.3.6.1.4.1.9.5.32.8.2.1.1 | ColumnciscoTsProtocolFilterPort | read-only | mandatory | This is the port in the switch to which this table entry corresponds. |
| 1.3.6.1.4.1.9.5.32.8.2.1.2 | ColumnciscoTsProtocolFilterBlockingMode | read-write | mandatory | This determines the frame types that will be blocked for this protocol class on this port. Setting the values causes the following: all(1) - causes all frames … |
| 1.3.6.1.4.1.9.5.32.8.2.1.3 | ColumnciscoTsProtocolFilterTranspMode | read-write | mandatory | If this port is in a SRT configured TrCRF, then setting this object will allow transparent bridging of frames in this protocol class. Setting this object to di… |
| 1.3.6.1.4.1.9.5.32.8.3 | TableciscoTsMACDestFilterTable | not-accessible | mandatory | A table of destination filters set up in the switch. New filters are created by adding entries to this table. Note that values for all of the relevant objects … |
| 1.3.6.1.4.1.9.5.32.8.3.1 | RowciscoTsMACDestFilterEntry | not-accessible | mandatory | Definition of each row in the filter table. |
| 1.3.6.1.4.1.9.5.32.8.3.1.1 | ColumnciscoTsMACDestFilterSwitchNumber | read-only | mandatory | Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are… |
| 1.3.6.1.4.1.9.5.32.8.3.1.2 | ColumnciscoTsMACDestFilterStationAddress | read-only | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. |
| 1.3.6.1.4.1.9.5.32.8.3.1.3 | ColumnciscoTsMACDestFilterType | read-write | mandatory | There are three types of destination MAC address filters: (1) Block destination address at specific ports. Indicates that the specified ports must not send fra… |
| 1.3.6.1.4.1.9.5.32.8.3.1.4 | ColumnciscoTsMACDestFilterPorts | read-write | mandatory | The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying po… |
| 1.3.6.1.4.1.9.5.32.8.3.1.5 | ColumnciscoTsMACDestFilterExitMask | read-write | mandatory | The set of output ports to which a limited multicast filter is applied. This object only has a value for Limited Multicast filters. Each octet within the value… |
| 1.3.6.1.4.1.9.5.32.8.3.1.6 | ColumnciscoTsMACDestFilterRemoteBox | read-write | mandatory | The remote switch to be used for a force destination filter. |
| 1.3.6.1.4.1.9.5.32.8.3.1.7 | ColumnciscoTsMACDestFilterRemotePort | read-write | mandatory | The remote port to be used for a force destination filter. |
| 1.3.6.1.4.1.9.5.32.8.3.1.8 | ColumnciscoTsMACDestFilterStatus | read-write | mandatory | A get request always returns valid(1). Set this object to invalid(2) to delete an entry. |
| 1.3.6.1.4.1.9.5.32.8.4 | TableciscoTsMACSourceFilterTable | not-accessible | mandatory | A table of source filters set up in the switch. New filters are created by adding entries to this table. Note that values for all of the relevant objects for a… |
| 1.3.6.1.4.1.9.5.32.8.4.1 | RowciscoTsMACSourceFilterEntry | not-accessible | mandatory | Definition of each row in the filter table. |
| 1.3.6.1.4.1.9.5.32.8.4.1.1 | ColumnciscoTsMACSourceFilterSwitchNumber | read-only | mandatory | Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are… |
| 1.3.6.1.4.1.9.5.32.8.4.1.2 | ColumnciscoTsMACSourceFilterStationAddress | read-only | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. |
| 1.3.6.1.4.1.9.5.32.8.4.1.3 | ColumnciscoTsMACSourceFilterType | read-write | mandatory | There are two types of source address filters: (1) Block source address at specific ports. Indicates that the specific source addresses must not send frames fr… |
| 1.3.6.1.4.1.9.5.32.8.4.1.4 | ColumnciscoTsMACSourceFilterPorts | read-write | mandatory | The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying po… |
| 1.3.6.1.4.1.9.5.32.8.4.1.5 | ColumnciscoTsMACSourceFilterStatus | read-write | mandatory | A get request always returns valid(1). Set this object to invalid(2) to delete an entry. |
| 1.3.6.1.4.1.9.5.32.8.5 | TableciscoTsDupAddrFilterTable | not-accessible | mandatory | A table of MAC addresses that have been identified as duplicates within an address scope. There is one entry in the tale for each such address. Entries cannot … |
| 1.3.6.1.4.1.9.5.32.8.5.1 | RowciscoTsDupAddrFilterEntry | not-accessible | mandatory | Definition of rows in the duplicate address table. |
| 1.3.6.1.4.1.9.5.32.8.5.1.1 | ColumnciscoTsDupAddrFilterSwitchNumber | read-only | mandatory | Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are… |
| 1.3.6.1.4.1.9.5.32.8.5.1.2 | ColumnciscoTsDupAddrFilterStationAddress | read-only | mandatory | The MAC address that has been identified as being a duplicate. All frames having this MAC address as their source address are being discarded at the ports spec… |
| 1.3.6.1.4.1.9.5.32.8.5.1.3 | ColumnciscoTsDupAddrFilterPorts | read-only | mandatory | A bit mask representing all the ports on which this duplicate MAC address is currently being filtered. Each octet within the value of this object specifies a s… |
| 1.3.6.1.4.1.9.5.32.8.6 | TableciscoTsTrunkProtocolFilterTable | not-accessible | mandatory | DSAP and SNAP Filter table for trunk ports which support protocol filters on a per-TrCRF basis. This table allows you to assign protocol classes and settings f… |
| 1.3.6.1.4.1.9.5.32.8.6.1 | RowciscoTsTrunkProtocolFilterEntry | not-accessible | mandatory | Definition of each row in the filter table. |
| 1.3.6.1.4.1.9.5.32.8.6.1.1 | ColumnciscoTsTrunkProtocolFilterPort | read-only | mandatory | This is the port in the switch to which this table entry corresponds. |
| 1.3.6.1.4.1.9.5.32.8.6.1.2 | ColumnciscoTsTrunkProtocolFilterBlockingMode | read-write | mandatory | This determines the frame types that will be blocked for this protocol class on this TrCRF on this port. Setting the values causes the following: all(1) - caus… |
| 1.3.6.1.4.1.9.5.32.8.6.1.3 | ColumnciscoTsTrunkProtocolFilterTranspMode | read-write | mandatory | If this port is in a SRT configured TrCRF, then setting this object will allow transparent bridging of frames in this protocol class. Setting this object to di… |
| 1.3.6.1.4.1.9.5.32.9 | NodeciscoTsUplinkMIBs |