CISCO-VISM-ATM-TRUNK-MIB
60 objects
The MIB module contain the Bearer and CID (Channel Identifier) connection information.
Imported Objects
| BASIS-MIB | vismChanGrp voice |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.4 | NodevismAal2CidGrp | |||
| 1.3.6.1.4.1.351.110.5.5.3.4.1 | TablevismAal2CidCnfTable | not-accessible | current | This table is defined to establish the binding between an endpoint and a PVC/CID pair in the case of AAL2 adaptation. This table is created and used in trunkin… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1 | RowvismAal2CidEntry | not-accessible | current | Identifies an entry for vismAal2CidCnfTable. |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.1 | ColumnvismAal2CidNum | read-only | current | This attribute defines part of the index for this table. vismAal2CidNum is the CID of a voice channel. CID has to be the same at both endpoints for a connectio… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.2 | ColumnvismAal2CidLcn | read-only | current | This attribute defines part of the index for the vismAal2CidCnfTable. Since CID is unique to a PVC, a combination of LCN and CID uniquely identifies a voice co… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.3 | ColumnvismAal2EndptNum | read-write | current | This attribute defines the endpoint number to which this CID is associated. It is the same as mgEndpointNumber defined in mgEndpointTable of CISCO-WAN-MG-MIB M… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.4 | ColumnvismAal2CidRowStatus | read-write | current | This variable allows to add or delete a CID. A CID can only be added or deleted. Once added, modifying an entry is not allowed. 'createAndGo': Use this to add … |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.5 | ColumnvismAal2CidType3Redundancy | read-write | current | This attribute defines whether the triple redundancy is supported for type 3 packets in AAL2 for this channel. When Triple redundancy is enabled for a channel,… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.6 | ColumnvismAal2CidVad | read-write | current | This attribute defines whether the VAD (Voice Activity Detection) has to be applied on this channel, upon detection of silence. For algorithms that do not have… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.7 | ColumnvismAal2CidProfileType | read-write | current | This attribute defines the profile type. The profile type defines which group of the profile tables the profile number should correspond to. There are three po… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.8 | ColumnvismAal2CidProfileNum | read-write | current | This attribute defines the profile number. A profile is a set of entries, where each entry specifies an encoding format with a UUI(User-to-User Indication) ran… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.9 | ColumnvismAal2CidCodecType | read-write | current | This attribute defines the codec Type used for the connection. 'g711u' represents PCMU with 64 kbps. 'g711a' represents PCMA with 64 kbps. 'g726r32000' represe… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.10 | ColumnvismAal2CidDtmfTransport | read-write | current | This attribute defines whether the DTMF (Dual Tone Multi Frequency) digits need to be transported to the other end-point. |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.11 | ColumnvismAal2CidCasTransport | read-write | current | This attribute defines whether the CAS(Channel Associated Signaling) bits need to be transported to the other endpoint. In the case of switching application, t… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.12 | ColumnvismAal2CidEcanEnable | read-write | current | This attribute defines whether Echo Cancellation has to be enabled on this connection. If it is set to 'true(1)', echo cancellation is enabled. If it is set to… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.13 | ColumnvismAal2InitVadTimer | read-write | current | This attribute defines the hangover time for VAD. Once the voice inactivity is detected, the gateway will wait for this duration before activating silence supp… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.14 | ColumnvismAal2CnfPktPeriod | read-write | current | This object is used to configure the packetization period for a given codec. This packetization period has to be a valid entry in the profile table. Profile ty… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.15 | ColumnvismAal2CidICSEnable | read-write | current | This object is used to enable or disable the ICS(Idle Channel Suppression) for a CID. This can be specified while adding the CID and cannot be modified. When t… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.16 | ColumnvismAal2CidState | read-only | current | Indicates the state of the CID. 'cidStateActive' : The CID is in service and operational. 'cidStateFailed' : The CID is in service but not operational, e.g. be… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.17 | ColumnvismAal2CidFailReason | read-only | current | This object is used to indicate the CID failure reason. 'self': fail because of non-PVC alarm 'highLevel': fail because of PVC alarm 'both': fail because of bo… |
| 1.3.6.1.4.1.351.110.5.5.3.4.1.1.18 | ColumnvismAal2CidAdminState | read-write | current | This attribute defines the operational administrative state of the bearer connection. cidInService: This is an operational state of the bearer connection where… |
| 1.3.6.1.4.1.351.110.5.5.9 | NodebearerConnGrp | |||
| 1.3.6.1.4.1.351.110.5.5.9.1 | TablebearerConnTable | not-accessible | current | This table describes the statistical information available on a per-bearer connection basis. These values are applicable equally to an endpoint. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1 | RowbearerConnEntry | not-accessible | current | Each entry in this table corresponds to a bearer connection, that was setup by binding an endpoint with a VC(Virtual channel)/CID pair, either through CLI or S… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.1 | ColumnbearerEndptNum | read-only | current | This attribute defines the index for the Bearer Connection Table. This refers to the same value as the index to the mgEndpointTable ie. mgEndpointNumber. This … |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.2 | ColumnbearerCid | read-only | current | This attribute defines the CID associated with this bearer connection. This refers to the same value as vismAal2CidNum in the vismAal2CidCnfTable. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.3 | ColumnbearerLcn | read-only | current | This attribute defines the PVC or LCN(Logical Channel Number) number to which this bearer connection is associated with. This refers to the same value as in vi… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.4 | ColumnbearerSentPkts | read-only | current | This attribute defines the count of packets sent towards the network since this connection setup. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.5 | ColumnbearerRcvdPkts | read-only | current | This attribute defines the count of packets received from the network since this connection setup. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.6 | ColumnbearerSentOctets | read-only | current | This attribute defines the count of bytes sent towards the network since this connection setup. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.7 | ColumnbearerRcvdOctets | read-only | current | This attribute defines the count of bytes received from the network since this connection setup. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.8 | ColumnbearerLostPkts | read-only | current | This attribute defines the count of packets lost in the egress direction (from the network). This is a computed number based on the expected number of packets … |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.9 | ColumnbearerJitter | read-only | current | This attribute defines the jitter (a.k.a interarrival jitter) This value is determined by the DSP(Digital Signal Processing) and obtained by the HOST processor… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.10 | ColumnbearerLatency | read-only | current | This attribute defines the latency (a.k.a end-to-end average transmission delay for a voice packet). |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.11 | ColumnbearerAal2ExtAISCnts | read-only | current | This object contains the number of external AIS (Alarm Indication Signal) AAL2 Type3 packets received. External AIS - is associated with a maintenance alarm de… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.12 | ColumnbearerAal2ExtRAICnts | read-only | current | This object contains the number of external RAI (Remote Alarm Indication) AAL2 Type3 packets received. External RAI - is a signal that is transmitted upstream … |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.13 | ColumnbearerAal2ConnAISCnts | read-only | current | This object contains the number of external Conn AIS AAL2 Type2 packets received. External Conn AIS - is transmitted in the downstream direction from the AAL T… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.14 | ColumnbearerAal2ConnRDICnts | read-only | current | This object contains the number of external Conn RDI(Remote Defect Indication) AAL2 Type2 packets received. External Conn RDI - is a signal transmitted upstrea… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.15 | ColumnbearerCntClrButton | read-write | current | This object is used to clear bearerSentPkts, bearerRcvdPkts, bearerSentOctets, and bearerRcvdOctets. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.16 | ColumnbearerPeakXmtCellRate | read-only | current | Peak transmit ATM cell rate is the ATM cells required to transmit peak AAL2 packets on a CID per second since midnight as per system time; the peak cell rate g… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.17 | ColumnbearerCurrentXmtCellRate | read-only | current | Current transmit ATM cell rate is the ATM cells required to transmit current AAL2 packets on a CID per second. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.18 | ColumnbearerPeakRcvCellRate | read-only | current | Peak receive ATM cell rate is the ATM cells required to receive peak AAL2 packets on a CID per second since midnight as per system time; the peak cell rate get… |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.19 | ColumnbearerCurrentRcvCellRate | read-only | current | Current receive ATM cell rate is the ATM cells required to receive current AAL2 packets on a CID per second. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.20 | ColumnbearerCurrentExtAISRcvCnts | read-only | current | This object contains the count of external AIS AAL2 (Type 2) received on this bearerEndptNum since its creation. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.21 | ColumnbearerCurrentExtRAIRcvCnts | read-only | current | This object contains the number of external RAI AAL2 (Type 2) received in this bearerEndptNum since its creation. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.22 | ColumnbearerCurrentConnAISCnts | read-only | current | This object contains count of external Connection AIS AAL2 (Type 2) received in this bearerEndptNum since its creation. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.23 | ColumnbearerCurrentConnRDICnts | read-only | current | This object contains the count of external Connection RDI (Remote Defect Indication) AAL2 (Type 2) received in this bearerEndptNum since its creation. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.24 | ColumnbearerCurrentExtAISXmtCnts | read-only | current | This object contains the count of external AIS AAL2 (Type 2) transmitted in this bearerEndptNum since its creation. |
| 1.3.6.1.4.1.351.110.5.5.9.1.1.25 | ColumnbearerCurrentExtRAIXmtCnts | read-only | current | This object contains the count of external RAI AAL2 (Type 2) transmitted in this bearerEndptNum since its creation. |
| 1.3.6.1.4.1.351.150.87 | IdentityciscoVismAtmTrunkMIB | The MIB module contain the Bearer and CID (Channel Identifier) connection information. | ||
| 1.3.6.1.4.1.351.150.87.2 | NodecvismAtmTrunkMIBConformance | |||
| 1.3.6.1.4.1.351.150.87.2.1 | NodecvismAtmTrunkMIBGroups | |||
| 1.3.6.1.4.1.351.150.87.2.1.1 | GroupciscoVismBearerConnGroup | deprecated | The collection of objects which are used to represent VISM Bearer connection. | |
| 1.3.6.1.4.1.351.150.87.2.1.2 | GroupciscoVismAAl2CidGroup | deprecated | The collection of objects which are used to represent VISM AAL2 CID connection. | |
| 1.3.6.1.4.1.351.150.87.2.1.3 | GroupciscoVismAAl2CidGroupRev1 | current | The collection of objects which are used to represent VISM AAL2 CID connection. | |
| 1.3.6.1.4.1.351.150.87.2.1.4 | GroupciscoVismBearerConnGroupRev1 | current | The collection of objects which are used to represent VISM Bearer connection. | |
| 1.3.6.1.4.1.351.150.87.2.2 | NodecvismAtmTrunkMIBCompliances | |||
| 1.3.6.1.4.1.351.150.87.2.2.1 | CompliancecvismAtmTrunkCompliance | deprecated | The compliance statement for objects related to VISM Bearer and CID Connection. | |
| 1.3.6.1.4.1.351.150.87.2.2.2 | CompliancecvismAtmTrunkComplianceRev1 | deprecated | The compliance statement for objects related to VISM Bearer and CID Connection. | |
| 1.3.6.1.4.1.351.150.87.2.2.3 | CompliancecvismAtmTrunkComplianceRev2 | current | The compliance statement for objects related to VISM Bearer and CID Connection. |