CISCO-VISM-CONN-MIB
75 objects
The MIB module to contains configuration and connection state information the VISM. For VoIP(Voice over IP) support, VISM needs one active AAL5 bearer PVC and one active AAL5 control PVC between the VISM card and the PXM. The redundant PVC feature is supported for AAL5 PVCs. Each redundant PVC pair has one active PVC and one standby PVC. There can be one AAL5 bearer redundant PVC pair and one AAL5 control redundant PVC pair. All PVCs are added on the ATM virtual port=1. For the AAL2 trunking application, there can be multiple AAL2 bearer PVCs. Also, AAL2 bearer PVC in this case, is between the two media gateways, instead of just between the VISM and the PXM. Up to 64 AAL2 bearer PVCs are supported for this application. Terminologies Used: PVC - Permanent Virtual Circuit OR Permanent Virtual Connection. SPVC - Soft Permanent Virtual Circuits. This is a PVC controlled by PNNI Controller. AAL - ATM Adaption Layer. PXM - Processor Switch Module. VC - Virtual Channel. CAC - Connection Admission Control. LCN - Logical Channel Number. VCI - Virtual Channel Identifier.
Imported Objects
| BASIS-MIB | vismChanCnfGrp vismChanGrp |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.1.1 | TablevismChanCnfGrpTable | not-accessible | current | The channel configuration table for voice traffic. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1 | RowvismChanCnfGrpEntry | not-accessible | current | An entry for each voice channel. An entry is created when the vismChanRowStatus is set to 'add'. An entry is deleted when the vismChanRowStatus is set to 'del'. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.1 | ColumnvismCnfChanNum | read-only | current | Logical Channel Number for the PVC. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.2 | ColumnvismChanRowStatus | read-write | current | An entry is created by setting this object to 'add (1)' : Adds an entry to the table. 'mod (3)' : This is used to modify an existing entry. 'del (2)' : This is… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.3 | ColumnvismChanPortNum | read-write | current | This refers to the virtual port between VISM and PXM. This number is defaulted to the appropriate number for the shelf, in PXM1 the value is 1 and 255 for PXM1… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.4 | ColumnvismChanLocRmtLpbkState | read-write | current | Loopback on cellbus in egress direction. 'enable (1)' : When you enable this option on a connection (channel) then all the cells that are coming from the netwo… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.5 | ColumnvismChanTestType | read-write | current | This object specifies the channel test type on a voice channel connection. 'testcon (1)' : Test Continuity. 'testdelay (2)' : Test Delay. 'notest (3)' : No tes… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.6 | ColumnvismChanTestState | read-only | current | This object identifies the state of the test in the object vismChanTestType. 'passed (1)' : Test passed. 'failed (2)' : Test failed. 'inprogress (3)' : Test is… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.7 | ColumnvismChanRTDResult | read-only | current | This object identifies round trip delay. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.8 | ColumnvismChanPvcType | read-write | current | This object identifies the PVC type. 'aal-5 (1)' - Indicates the PVC type is AAL5. 'aal-2 (2)' - Indicates the PVC type is AAL2. 'aal-1 (3)' - Indicates the PV… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.9 | ColumnvismChanConnType | read-write | current | This object identifies the connection type. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.10 | ColumnvismLocalVpi | read-only | current | This object identifies local VPI, together with the local VCI and NSAP represents the local end point in this connection. GET on this object returns value 0. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.11 | ColumnvismLocalVci | read-only | current | This object identifies local VCI, together with the local VPI and NSAP represents the local end point in this connection. GET on this object returns the vismCn… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.12 | ColumnvismLocalNSAP | read-write | current | This object identifies the local NSAP address. The NSAP is 20 bytes binary and is encoded as follows: 13 bytes : for prefix(node name) 2 bytes : for Cisco ID 1… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.13 | ColumnvismRemoteVpi | read-write | current | This object identifies the remote VPI, together with the remote VCI and NSAP represents the remote end point in this connection. This parameter is required onl… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.14 | ColumnvismRemoteVci | read-write | current | This object identifies the VCI, together with the remote VPI and NSAP represents the remote end point in this connection. This parameter is required only if vi… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.15 | ColumnvismRemoteNSAP | read-write | current | This object identifies the remote NSAP address. The NSAP is 20 bytes binary and is encoded as follows: 13 bytes : for prefix(node name) 2 bytes : for Cisco ID … |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.16 | ColumnvismMastership | read-write | current | 'master (1)' : indicates the connection on the channel is a master. 'slave (2)' : indicates the connection on the channel is a slave. 'unknown (3)' : indicates… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.17 | ColumnvismVpcFlag | read-write | current | This object specifies the connection type which is used by PXM to setup connection. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.18 | ColumnvismConnServiceType | read-write | current | This specifies the class of service or service type 'cbr (1)' : Constant Bit Rate. 'vbr-rt (2)' : Variable Bit Rate 1 (Real Time) although, VISM does not do an… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.19 | ColumnvismRoutingPriority | read-write | current | This object is used by PXM to determine how important this connection is when selecting connections to route. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.20 | ColumnvismMaxCost | read-write | current | Maximum allowed cost. It is related to Cost Based Routing. This is used by PXM so that it won't choose a path with a cost greater than this configured level. T… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.21 | ColumnvismRestrictTrunkType | read-write | current | This object specifies trunk type for routing, used by PXM. 'noresriction (1)' : No routing restriction, it can be done on any trunk. 'terrestrialTrunk (2)' : I… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.22 | ColumnvismConnPCR | read-write | current | This indicates bandwidth(Peak Cell Rate) in cells per second from the local end i.e in the ingress direction of the PVC. For AAL2 PVCs, the PCR to be specified… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.23 | ColumnvismConnPercentUtil | read-write | current | This is the expected long-term utilization of the channel by this end-point. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.24 | ColumnvismConnRemotePCR | read-write | current | This object indicates bandwidth(Peak Cell Rate) from the other end i.e in the egress direction of the PVC. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.25 | ColumnvismConnRemotePercentUtil | read-write | current | This is the expected long-term utilization of the channel by the other end-point. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.26 | ColumnvismChanProtection | read-write | current | This object is used to configure a PVC protection group (or redundant group) with the PVCs protecting each other. Currently only two PVCs are supported in a pr… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.27 | ColumnvismChanPreference | read-write | current | This object is used to identify a PVC as primary or secondary. The primary PVC should be added before the secondary. Similarly secondary should be deleted befo… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.28 | ColumnvismChanActivityState | read-only | current | Indicates whether the PVC is currently used to carry IP traffic or not, and whether it has failed. The possible states are: 'active (1)' : Channel is healthy a… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.29 | ColumnvismChanLockingState | read-write | current | This object is used to control the switchover of protected channels. 'unlock (1)' : Transition state to unlock. A channel which is in lock state has to be brou… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.30 | ColumnvismChanScrIngress | read-write | current | This object identifies the SCR (Sustained Cell Rate) for the PVC in the ingress direction. SCR is used for vbr connection types only. Traffic shaping is not do… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.31 | ColumnvismChanMbsIngress | read-write | current | This object defines the MBS (Max. Burst Size). This object is meaningful for VBR connections only. This object defines the MBS value for the ingress direction … |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.32 | ColumnvismChanClrIngress | read-write | current | This object defines the CLR (Cell Loss Ratio) for the PVC in ingress direction. This field is also meaningful for VBR connections only. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.33 | ColumnvismChanCdvt | read-write | current | This object defines the CDVT (Cell Delay Variation Tolerance) for the connection. CDVT is useful for determining the playout buffer size in the DSPs. This obje… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.34 | ColumnvismConnPCREgress | read-write | current | This object defines the PCR (Peak Cell Rate) for the PVC in egress direction. PCR is applicable to all connection service types ie. CBR, RT-VBR and nRT-VBR. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.35 | ColumnvismChanScrEgress | read-write | current | This object defines the SCR (Sustained Cell Rate) for the PVC in the egress direction. SCR is used for VBR connection types only. No traffic shaping is done on… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.36 | ColumnvismChanMbsEgress | read-write | current | This object defines the MBS (Max. Burst Size) for a PVC in egress direction. This object is meaningful for VBR connections only. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.37 | ColumnvismChanClrEgress | read-write | current | This object defines the CLR (Cell Loss Ratio) for the PVC in egress direction. This field is also meaningful for VBR connections only. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.38 | ColumnvismChanApplication | read-write | current | This object defines the application that the LCN is used for. There are 4 types of PVCs known so far: 'control (1)' : Control PVC used for carrying control tra… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.39 | ColumnvismChanFallbackLcn | read-write | current | This object defines the LCN to be used as a fallback mechanism, in case the primary PVC fails. This is applicable if the PVC is configured for redundancy. The … |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.40 | ColumnvismChanReroute | read-write | current | This is used by the administrator to trigger the re-routing of the connection. The re-routing takes effect, when this object is set to 'true (1)'. When set to … |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.41 | ColumnvismFarEndAddressType | read-write | current | The address type can be one of five types: NSAP, E164, GWID, notapplicable or unspecified. It determines which object contains the scope for the VCCI, i.e. whe… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42 | ColumnvismFarEndE164Address | read-write | current | The E.164 address of the far end peer. The address is expressed as decimal numbers with up to 15 digits. If the vismFarEndAddressType is different from e164, t… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.43 | ColumnvismFarEndGWIDAddress | read-write | current | The gateway ID of the far end peer. The address is expressed as ASCII characters. If the vismFarEndAddressType is different from gwid(4), this object is not ap… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.44 | ColumnvismFarEndNSAPAddress | read-write | current | This object contains the 20 byte NSAP address of the far end peer. If the vismFarEndAddressType is different from 'nsap', this object is not applicable and it … |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.45 | ColumnvismVCCI | read-write | current | The VCCI, or Virtual Circuit Connection Identifier, is a variable that identifies a virtual circuit connection between two nodes. A virtual circuit connection,… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.46 | ColumnvismConnAdminStatus | read-write | current | This object specifies channel administration status. 'up (1)' : Indicates the status channel is up. 'down (2)' : Indicates the channel is down or out of servic… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.47 | ColumnvismChanPrefRouteId | read-write | current | This object serves to associate a preferred route with a connection. The value of '0' means no preferred route is associated with this connection. Usage: - If … |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.48 | ColumnvismChanDirectRoute | read-write | current | This object serves to associate a preferred route as directed route (corresponds to the preferred route object vismChanPrefRouteId). A directed route specifies… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.49 | ColumnvismChanAisSuppression | read-write | current | AIS suppression can be enabled(true) or disabled(false). When AIS suppression is disabled on a PVC, ATM network alarms on that PVC will immediately propagate t… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.50 | ColumnvismChanAisDelayTime | read-write | current | This object defines the duration for which ATM network alarms on this PVC will be prevented from propagating onto the TDM side when AIS suppression is enabled. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.51 | ColumnvismChanUserMaxPCRBandwidth | read-write | current | This indicates a user configured bandwidth (Peak Cell Rate) in cells per second from the local end i.e in the ingress direction of the PVC. For a VoIP bearer P… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.52 | ColumnvismChanUserMaxScrIngress | read-write | current | This object defines a user configured SCR (Sustained Cell Rate) for the PVC. SCR is used for vbr connection types only. Although, based on the value of SCR, an… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.53 | ColumnvismChanUserMaxMbsIngress | read-write | current | This object defines the user configured MBS (Maximum Burst Size). This object is meaningful for VBR connections only. This object defines the MBS value for the… |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.54 | ColumnvismChanUserMinPCRBandwidth | read-write | current | This indicates a user configured minimum number of cells that will be required to keep the connection up. |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.55 | ColumnvismChanUserPcrNumber | read-write | current | This indicates which bandwidth value the user has chosen. This value cannot be specified when adding the connection. It can be modified once the connection has… |
| 1.3.6.1.4.1.351.110.5.5.3.1.2 | ScalarvismChanNumNextAvailable | read-only | current | This object contains the next unused channel number. When channels are available the range is 32..510. This number can be used in channel config table. Value 0… |
| 1.3.6.1.4.1.351.110.5.5.3.2 | NodevismChanStateGrp | |||
| 1.3.6.1.4.1.351.110.5.5.3.2.1 | TablevismChanStateGrpTable | not-accessible | current | voice connection state table. |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1 | RowvismChanStateGrpEntry | not-accessible | current | An entry for each channel (PVC). |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1.1 | ColumnvismStateChanNum | read-only | current | Refers to the channel Number LCN. |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1.2 | ColumnvismChanState | read-only | current | This object indicates the channel status. 'notConfigured (1)' : Indicates the channel is not configured. 'okay (2)' : Indicates the channel is healthy, i.e not… |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1.3 | ColumnvismChanXmtATMState | read-only | current | This object indicates the transmit state of channel on the ATM side(towards the network). 'other (1)' : Indicates the transmit channel is in unknown state. 'no… |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1.4 | ColumnvismChanRcvATMState | read-only | current | This object indicates the receive state of channel on the ATM side(from the network). 'other (1)' : Indicates the receive channel is in unknown state. 'normal … |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1.5 | ColumnvismChanStatusBitMap | read-only | current | This object indicates the consolidated bit map of the channel alarm state. Individual bit positions are as defined below, all reserved bits will be set to zero… |
| 1.3.6.1.4.1.351.150.86 | IdentityciscoVismConnMIB | The MIB module to contains configuration and connection state information the VISM. For VoIP(Voice over IP) support, VISM needs one active AAL5 bearer PVC and … | ||
| 1.3.6.1.4.1.351.150.86.2 | NodeciscoVismConnMIBConformance | |||
| 1.3.6.1.4.1.351.150.86.2.1 | NodeciscoVismConnMIBGroups | |||
| 1.3.6.1.4.1.351.150.86.2.1.1 | GroupciscoVismConnGroup | deprecated | A collection of objects providing information applicable to connections in VISM Module. | |
| 1.3.6.1.4.1.351.150.86.2.1.2 | GroupciscoVismConnStateGroup | current | A collection of objects related to state of VISM connections. | |
| 1.3.6.1.4.1.351.150.86.2.1.3 | GroupciscoVismConnGroupRev1 | current | A collection of objects providing information applicable to connections in VISM Module. | |
| 1.3.6.1.4.1.351.150.86.2.2 | NodeciscoVismConnMIBCompliances | |||
| 1.3.6.1.4.1.351.150.86.2.2.1 | ComplianceciscoVismConnCompliance | deprecated | The compliance statement for SNMP entities which support Connections in VISM Module. | |
| 1.3.6.1.4.1.351.150.86.2.2.2 | ComplianceciscoVismConnComplianceRev1 | current | The compliance statement for SNMP entities which support Connections in VISM Module. |