MIB Viewer

CISCO-VISM-XGCP-EXT

43 objects
The MIB module contain the XGCP MIB feature in VISM
Imported Objects
BASIS-MIBvoice
CISCOWAN-SMIciscoWan
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.351.110.5.5.5NodevismXgcpExtensionGrp
1.3.6.1.4.1.351.110.5.5.5.1NodevismXgcpCoreObjects
1.3.6.1.4.1.351.110.5.5.5.1.1ScalarvismXgcpRequestMaxTimeoutread-writecurrentThis object specifies the maximum timeout value. This timer value is used along with xgcpRequestTimeout and xgcpRequestRetries (in xgcpGrp.my) to determine the…
1.3.6.1.4.1.351.110.5.5.5.1.2ScalarvismXgcpPortread-writecurrentThis object is used to configure the local UDP port on VISM used by the SGCP and MGCP protocols to communicate with the call agent. The UDP port is used togeth…
1.3.6.1.4.1.351.110.5.5.5.1.3TablevismXgcpPeerTablenot-accessiblecurrentThis table is used to provision peer-specific XGCP configuration information. Each table entry corresponds to an XGCP peer name / peer XGCP variant combination.
1.3.6.1.4.1.351.110.5.5.5.1.3.1RowvismXgcpPeerEntrynot-accessiblecurrentEach row is identified by XGCP peer name and peer XGCP protocol number combination. This means, if an MGC uses more than one variant of XGCP (i.e MGCP, SGCP 1.…
1.3.6.1.4.1.351.110.5.5.5.1.3.1.1ColumnvismXgcpPeerNumberread-onlycurrentThe value of this object is the same as mgcNumber from MGMIB.
1.3.6.1.4.1.351.110.5.5.5.1.3.1.2ColumnvismXgcpPeerProtocolNumberread-onlycurrentThe value of this object is the same as mgcProtocolNumber from MGMIB.
1.3.6.1.4.1.351.110.5.5.5.1.3.1.3ColumnvismXgcpPeerPortread-writecurrentThis object is used to configure the local UDP port on VISM used by the SGCP and MGCP protocols to communicate with the call agent. The UDP port is used togeth…
1.3.6.1.4.1.351.110.5.5.5.1.4TablevismXgcpMsgStatTablenot-accessiblecurrentThis table is an extension to the xgcpMsgStatTable contained in the XGCP MIB. This table provides per-message type based detailed statistics information.
1.3.6.1.4.1.351.110.5.5.5.1.4.1RowvismXgcpMsgStatEntrynot-accessiblecurrentThe row of the vismXgcpMsgStatTable contains additional information about XGCP message statistics beyond that provided by the XGCP MIB.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.1ColumnvismXgcpIpAddressread-onlycurrentThis object specifies the IP address of the Media Gateway Controller. The value of this object is the same as xgcpIpAddress of XGCP-MIB.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.2ColumnvismXgcpCrcxCntsread-onlycurrentThis refers to the count of CRCX (Create Connection) messages received from the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.3ColumnvismXgcpCrcxFailCntsread-onlycurrentThis refers to the count of CRCX (Create Connection) messages received from the call agent that were responded to with a failure return code.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.4ColumnvismXgcpMdcxCntsread-onlycurrentThis refers to the count of MDCX (Modify Connection) messages received from the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.5ColumnvismXgcpMdcxFailCntsread-onlycurrentThis refers to the count of MDCX (Modify Connection) messages received from the call agent that were responded to with a failure return code.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.6ColumnvismXgcpDlcxRcvCntsread-onlycurrentThis refers to the count of DLCX (Delete Connection) messages received from the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.7ColumnvismXgcpDlcxRcvFailCntsread-onlycurrentThis refers to the count of DLCX (Delete Connection) messages received from the call agent that were responded to with a failure return code.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.8ColumnvismXgcpDlcxSentCntsread-onlycurrentThis refers to the count of DLCX (Delete Connection) messages sent to the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.9ColumnvismXgcpDlcxSentFailCntsread-onlycurrentThis refers to the count of DLCX (Delete Connection) messages sent to the call agent for which a response with failure return code was received or which timed …
1.3.6.1.4.1.351.110.5.5.5.1.4.1.10ColumnvismXgcpRqntCntsread-onlycurrentThis refers to the count of RQNT (Request Notify) messages received from the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.11ColumnvismXgcpRqntFailCntsread-onlycurrentThis refers to the count of RQNT (Request Notify) messages received from the call agent that were responded to with a failure return code.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.12ColumnvismXgcpNtfyCntsread-onlycurrentThis refers to the count of NTFY (Notify) messages sent to the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.13ColumnvismXgcpNtfyFailCntsread-onlycurrentThis refers to the count of NTFY (Notify) messages sent to the call agent for which a response with failure return code was received or which timed out waiting…
1.3.6.1.4.1.351.110.5.5.5.1.4.1.14ColumnvismXgcpAuepCntsread-onlycurrentThis refers to the count of AUEP (Audit Endpoint) messages received from the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.15ColumnvismXgcpAuepFailCntsread-onlycurrentThis refers to the count of AUEP (Audit Endpoint) messages received from the call agent that were responded to with a failure return code.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.16ColumnvismXgcpAucxCntsread-onlycurrentThis refers to the count of AUCX (Audit Connection) messages received from the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.17ColumnvismXgcpAucxFailCntsread-onlycurrentThis refers to the count of AUCX (Audit Connection) messages received from the call agent that were responded to with a failure return code.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.18ColumnvismXgcpRsipCntsread-onlycurrentThis refers to the count of RSIP (Restart In Progress) messages sent to the call agent since reset.
1.3.6.1.4.1.351.110.5.5.5.1.4.1.19ColumnvismXgcpRsipFailCntsread-onlycurrentThis refers to the count of RSIP (Restart In Progress) messages sent to the call agent for which a response with failure return code was received or which time…
1.3.6.1.4.1.351.110.5.5.5.2NodevismXgcpEnhancementsObjects
1.3.6.1.4.1.351.110.5.5.5.2.1ScalarvismXgcpRestartInProgressTdinitread-writecurrentThe endpoint becomes disconnected when it tries to communicate with the call agent and the retransmission procedure times out after retrying. The endpoint in d…
1.3.6.1.4.1.351.110.5.5.5.2.2ScalarvismXgcpRestartInProgressTdminread-writecurrentThe endpoint becomes disconnected when it tries to communicate with the call agent and the retransmission procedure times out after retrying. The endpoint in d…
1.3.6.1.4.1.351.110.5.5.5.2.3ScalarvismXgcpRestartInProgressTdmaxread-writecurrentThe maximum waiting delay (Tdmax) timeout value used by the Media Gateway to send the Restart In Progress with the restart method as RM:disconnected to the Med…
1.3.6.1.4.1.351.150.94IdentityciscoVismXgcpExtMIBThe MIB module contain the XGCP MIB feature in VISM
1.3.6.1.4.1.351.150.94.2NodeciscoVismXgcpExtMIBConformance
1.3.6.1.4.1.351.150.94.2.1NodeciscoVismXgcpExtMIBGroups
1.3.6.1.4.1.351.150.94.2.1.1GroupciscoVismXgcpExtensionGroupcurrentThe collection of objects which are used to represent VISM XGCP MIB.
1.3.6.1.4.1.351.150.94.2.1.2GroupciscoVismXgcpCoreGroupcurrentThe collection of objects which are used to represent VISM peer XGCP MIB configuration.
1.3.6.1.4.1.351.150.94.2.1.3GroupciscoVismXgcpStatsGroupcurrentThe collection of objects which are used to represent VISM peer XGCP MIB Statistics information.
1.3.6.1.4.1.351.150.94.2.1.4GroupciscoVismXgcpEnhancementGroupcurrentThe collection of objects which are used to represent VISM XGCP Enhancement.
1.3.6.1.4.1.351.150.94.2.2NodeciscoVismXgcpExtMIBCompliances
1.3.6.1.4.1.351.150.94.2.2.1ComplianceciscoVismXgcpExtCompliancecurrentThe compliance statement for objects related to VISM-XGCP-MIB.