MIB Viewer

CISCO-VOICE-AALX-PROFILE-MIB

91 objects
This MIB defines the objects specific to voice over ATM or voice over IP. Those objects are related to the following areas: 1. CODEC Negotiation (AAL1/AAL5) 2. AAL2 Profile 3. SVC connection.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.323IdentityciscoVoiceAalxProfileMIBThis MIB defines the objects specific to voice over ATM or voice over IP. Those objects are related to the following areas: 1. CODEC Negotiation (AAL1/AAL5) 2.…
1.3.6.1.4.1.9.9.323.0NodeciscoVoiceAalxProfileMIBNotifs
1.3.6.1.4.1.9.9.323.1NodeciscoVoiceAalxProfileMIBObjects
1.3.6.1.4.1.9.9.323.1.1NodecvapCodecConfig
1.3.6.1.4.1.9.9.323.1.1.1TablecvapCodecTablenot-accessiblecurrentThis table defines attributes of CODEC negotiation. These attributes are used for CODEC negotiation of a call when a call setup request is made by call agent t…
1.3.6.1.4.1.9.9.323.1.1.1.1RowcvapCodecEntrynot-accessiblecurrentAn entry containing management information for CODEC negotiation of the adaptation type for a call in the media gateway.
1.3.6.1.4.1.9.9.323.1.1.1.1.1ColumncvapCodecNegotiationAdaptTypenot-accessiblecurrentThis object specifies the adaptation layer which supports CODEC negotiation of calls and the order of CODECs used in negotiation can be configured as the value…
1.3.6.1.4.1.9.9.323.1.1.1.1.2ColumncvapCodecNegotiationOptionread-writecurrentThis object defines the CODEC negotiation option which determines the order of CODECs used by a call during CODEC negotiation. The possible CODEC negotiation o…
1.3.6.1.4.1.9.9.323.1.1.2TablecvapCodecConfigTablenot-accessiblecurrentThis table contains the attributes whose configuration depends on CODEC types and adaptation types. For each adaptation layer, one entry for each CODEC rate su…
1.3.6.1.4.1.9.9.323.1.1.2.1RowcvapCodecConfigEntrynot-accessiblecurrentAn entry represents a CODEC rate supported for VoIP or VoATM with different adaptation layers in the media gateway.
1.3.6.1.4.1.9.9.323.1.1.2.1.1ColumncvapCodecConfigAdaptTypenot-accessiblecurrentAn unique index identifying the adaptation layer supported by voice applications in the media gateway. The adaptation types include: other :Voice over other me…
1.3.6.1.4.1.9.9.323.1.1.2.1.2ColumncvapCodecConfigTypenot-accessiblecurrentThis object specifies the CODEC rate defined in CvcSpeechCoderRate.
1.3.6.1.4.1.9.9.323.1.1.2.1.3ColumncvapCodecConfigPreferenceread-writecurrentThis object specified the preference configured by the user for each CODEC. Lower the number, higher the preference of the CODEC. If this object is set to 0, t…
1.3.6.1.4.1.9.9.323.1.1.2.1.4ColumncvapCodecConfigVoicePacketPeriodread-writecurrentThis object specifies the packetization period for a particular CODEC in voice application. The packetization period represents the time for the media gateway …
1.3.6.1.4.1.9.9.323.1.1.2.1.5ColumncvapCodecConfigVbdPacketPeriodread-writedeprecatedThis object specifies the packetization period for a particular CODEC in VBD (Voice Band Data) upspeed. The packetization period represents the time for the me…
1.3.6.1.4.1.9.9.323.1.1.2.1.6ColumncvapCodecConfigJitterDelayModeread-writecurrentThe object specifies the jitter buffer mode applied to a call connection. adaptive - means to use cvapCodecConfigNewJtrNomDelay as the initial jitter buffers s…
1.3.6.1.4.1.9.9.323.1.1.2.1.7ColumncvapCodecConfigJitterMaxDelayread-writecurrentThis object specifies the maximum jitter buffer size. If cvapCodecConfigJitterDelayMode is set to adaptive(1), the DSP will dynamically pick an optimal value o…
1.3.6.1.4.1.9.9.323.1.1.2.1.8ColumncvapCodecConfigJitterNomDelayread-writedeprecatedThis object specifies the nominal jitter buffer size. If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is fixed at this value for the du…
1.3.6.1.4.1.9.9.323.1.1.2.1.9ColumncvapCodecConfigJitterMinDelayread-writecurrentThis object specifies the minimum jitter buffer size. If cvapCodecConfigJitterDelayMode is set to adaptive(1), the DSP will dynamically pick an optimal value o…
1.3.6.1.4.1.9.9.323.1.1.2.1.10ColumncvapCodecConfigDtmfRelayread-writecurrentWhen this object is set to 'true', the digits will be sent as peer-to-peer packet in the bearer. When this object is set to 'false', the digits will be sent as…
1.3.6.1.4.1.9.9.323.1.1.2.1.11ColumncvapCodecConfigPayloadTyperead-writecurrentThis object specifies the payload type of the CODEC in voice application as specified in RFC1890. The values (0..95) are static payload type. The values (96..1…
1.3.6.1.4.1.9.9.323.1.1.2.1.12ColumncvapCodecConfigNewJtrNomDelayread-writecurrentThis object specifies the nominal jitter buffer size. If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is fixed at this value for the du…
1.3.6.1.4.1.9.9.323.1.2NodecvapAal2Config
1.3.6.1.4.1.9.9.323.1.3NodecvapSvcConfig
1.3.6.1.4.1.9.9.323.1.3.1TablecvapSvcConfigTablenot-accessiblecurrentThis table contains the SVC (both in AAL1 and AAL2) configuration which is used for call connection establishment between the PNNI controller and the media gat…
1.3.6.1.4.1.9.9.323.1.3.1.1RowcvapSvcConfigEntrynot-accessiblecurrentAn entry containing management information for SVC connection in the media gateway. An entry of this table is created when a new media gateway is detected by m…
1.3.6.1.4.1.9.9.323.1.3.1.1.1ColumncvapSvcAtmQosCellDelayread-writecurrentThis object identifies end-to-end cell delay in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is appli…
1.3.6.1.4.1.9.9.323.1.3.1.1.2ColumncvapSvcAtmQosCtdread-writecurrentThis object identifies end-to-end maximum cell transfer in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. …
1.3.6.1.4.1.9.9.323.1.3.1.1.3ColumncvapSvcAtmQosClrread-writecurrentThis object identifies maximum Cell Loss Ratio (CLR) in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It …
1.3.6.1.4.1.9.9.323.1.3.1.1.4ColumncvapSvcTrfScalingFactorread-writecurrentThis object specifies Traffic Scaling Factor in computing factored bandwidth which is used in ATM signaling in voice SVC establishment. When this value is less…
1.3.6.1.4.1.9.9.323.1.3.1.1.5ColumncvapSvcAal2CidNumberread-writecurrentThis object specifies the default AAL2 CID (Channel Identification) number used for AAL2 SVC connections. 0-7 is reserved.
1.3.6.1.4.1.9.9.323.1.3.1.1.6ColumncvapSvcAggTrafficClippingread-writecurrentThis object defines the aggregate traffic clipping policy. This object specifies if the aggregate traffic clipping policy is applicable to all bearer traffic g…
1.3.6.1.4.1.9.9.323.1.3.1.1.7ColumncvapSvcAggLinkStateread-onlycurrentThis object provides the state of the SVC link between PNNI controller and the media gateway. When the SVC software module fails to register NSAP address with …
1.3.6.1.4.1.9.9.323.1.3.1.1.8ColumncvapSvcPartialFillSupportedread-writecurrentThis object indicates the fill level of cells in case of AAL1 adaptation . The value of this object will be used if the call agent does not specify partial fil…
1.3.6.1.4.1.9.9.323.1.3.1.1.9ColumncvapSvcMgcpSelectorByteValueread-writecurrentThis object specifies the selector byte value of the NSAP address for MGCP protocol. When a SVC call setup indication from the network is received, it will loo…
1.3.6.1.4.1.9.9.323.1.3.1.1.10ColumncvapSvcH248SelectorByteValueread-writecurrentThis object specifies the selector byte value of the NSAP address for H.248 protocol. When a SVC call setup indication from the network is received, it will lo…
1.3.6.1.4.1.9.9.323.1.3.1.1.11ColumncvapSvcDelNotifGuardTimerread-writecurrentA timer, for a duration as specified by this object, will be started when the SVC call is released from the network side. Upon expiration of this timer, the ca…
1.3.6.1.4.1.9.9.323.1.3.1.1.12ColumncvapSvcMultiCIDPerSvcread-writecurrentThis object enables the user to disable or enable the Multi-CID SVC feature on the gateway. When this object is set to 'true', multiple CIDs can be established…
1.3.6.1.4.1.9.9.323.1.3.1.1.13ColumncvapSvcMultiCIDFillTimerread-writecurrentThis object defines the time (millisecs) to wait for filling up the cell when the next packet is not ready. After waiting for the time configured in this objec…
1.3.6.1.4.1.9.9.323.1.3.1.1.14ColumncvapSvcMultiCIDCACSCRread-writecurrentThis object specifies the SCR (Sustained Cell Rate) per Multi-CID SVC. The value of this object will be used for CAC (Call Admission Control) processing, and w…
1.3.6.1.4.1.9.9.323.1.3.1.1.15ColumncvapSvcMultiCIDCACPCRread-writecurrentThis object specifies the PCR (Peak Cell Rate) per Multi-CID SVC. The value of this object will be used for CAC (Call Admission Control) processing, and will d…
1.3.6.1.4.1.9.9.323.1.3.1.1.16ColumncvapSvcMultiCIDOriginatDelTimerread-writecurrentThis object specifies the time to wait to delete an Originated -SVC in the case where a CID delete just occurred and the SVC has no more CIDs after the deletio…
1.3.6.1.4.1.9.9.323.1.3.1.1.17ColumncvapSvcMultiCIDTerminatDelTimerread-writecurrentThis object specifies the time that the Terminating end can attempt to add a new CID into the Terminated-SVC after the last CID in a slave-end SVC is deleted. …
1.3.6.1.4.1.9.9.323.1.3.1.1.18ColumncvapSvcMultiCIDGlareThresholdread-writecurrentThis object specifies the threshold at when reached on the SVC-Terminating end, that no more CID's can be added to that Terminated-SVC from the Termination end…
1.3.6.1.4.1.9.9.323.1.4NodecvapSvcStats
1.3.6.1.4.1.9.9.323.1.4.1TablecvapSvcStatsTablenot-accessiblecurrentThis table contains SVC statistics associated with the communication between the media gateway and the PNNI controller.
1.3.6.1.4.1.9.9.323.1.4.1.1RowcvapSvcStatsEntrynot-accessiblecurrentAn entry containing statistics information for a SVC that is associated with the communication between the media gateway and the PNNI controller.
1.3.6.1.4.1.9.9.323.1.4.1.1.1ColumncvapSvcTxSetupsread-onlycurrentThis object indicates the number of 'SETUP' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.2ColumncvapSvcRxSetupsread-onlycurrentThis object indicates the number of 'SETUP' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.3ColumncvapSvcTxCallProcsread-onlycurrentThis object indicates the number of call 'PROCEED' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.4ColumncvapSvcRxCallProcsread-onlycurrentThis object indicates the number of call 'PROCEED' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.5ColumncvapSvcTxConnsread-onlycurrentThis object indicates the number of 'CONNECT' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.6ColumncvapSvcTxConnAcksread-onlycurrentThis object indicates the number of 'CONNECT ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.7ColumncvapSvcRxConnsread-onlycurrentThis object indicates the number of 'CONNECT' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.8ColumncvapSvcRxConnAcksread-onlycurrentThis object indicates the number of 'CONNECT ACK' messages received by the gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.9ColumncvapSvcTxReleasesread-onlycurrentThis object indicates the number of 'RELEASE' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.10ColumncvapSvcTxReleaseComplsread-onlycurrentThis object indicates the number of 'RELEASE COMPLETE' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.11ColumncvapSvcRxReleasesread-onlycurrentThis object indicates the number of RELEASE' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.12ColumncvapSvcRxReleaseComplsread-onlycurrentThis object indicates the number of 'RELEASE COMPLETE' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.13ColumncvapSvcTxRestartsread-onlycurrentThis object indicates the number of 'RESTART' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.14ColumncvapSvcTxRestartAcksread-onlycurrentThis object indicates the number of 'RESTART ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.15ColumncvapSvcRxRestartsread-onlycurrentThis object indicates the number of 'RESTART' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.16ColumncvapSvcRxRestartAcksread-onlycurrentThis object indicates the number of 'RESTART ACK' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.17ColumncvapSvcTxResyncStrtsread-onlycurrentThis object indicates the number of 'RESYNC START' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.18ColumncvapSvcTxResyncStrtAcksread-onlycurrentThis object indicates the number of 'RESYNC START ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.19ColumncvapSvcRxResyncStrtsread-onlycurrentThis object indicates the number of 'RESYNC START' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.20ColumncvapSvcRxResyncStrtAcksread-onlycurrentThis object indicates the number of 'RESYNC START ACK' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.21ColumncvapSvcTxResyncEndsread-onlycurrentThis object indicates the number of 'RESYNC END' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.22ColumncvapSvcTxResyncEndAcksread-onlycurrentThis object indicates the number of 'RESYNC END ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.23ColumncvapSvcRxResyncEndsread-onlycurrentThis object indicates the number of 'RESYNC END ACK' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.24ColumncvapSvcRxResyncEndAcksread-onlycurrentThis object indicates the number of 'RESYNC END ACK' messages received by the media gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.25ColumncvapSvcTxBulkResyncsread-onlycurrentThis object indicates the number of 'BULK RESYNC' messages sent to the PNNI controller from the media gateway since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.26ColumncvapSvcRxBulkResyncsread-onlycurrentThis object indicates the number of 'BULK RESYNC' messages received by the gateway from the PNNI controller since last gateway reset.
1.3.6.1.4.1.9.9.323.1.4.1.1.27ColumncvapSvcCallProcExpiriesread-onlycurrentThis object indicates the number of call 'PROCEED' messages have been sent from the media gateway and have never received any response from the PNNI controller.
1.3.6.1.4.1.9.9.323.1.4.1.1.28ColumncvapSvcReleasExpiriesread-onlycurrentThis object indicates the number of call 'RELEASE' messages have been sent from the media gateway and have never received any response from the PNNI controller.
1.3.6.1.4.1.9.9.323.1.4.1.1.29ColumncvapSvcConnExpiriesread-onlycurrentThis object indicates the number of call 'CONNECT' messages have been sent from the media gateway and have never received any response from the PNNI controller.
1.3.6.1.4.1.9.9.323.1.4.1.1.30ColumncvapSvcConnAckExpiriesread-onlycurrentThis object indicates the number of call 'CONNECT ACK' messages have been sent from the media gateway and have never received any response from the PNNI contro…
1.3.6.1.4.1.9.9.323.1.4.1.1.31ColumncvapSvcRestartExpiriesread-onlycurrentThis object indicates the number of call 'RESTART' messages have been sent from the media gateway and have never received any response from the PNNI controller.
1.3.6.1.4.1.9.9.323.1.4.1.1.32ColumncvapSvcResyncExpiriesread-onlycurrentThis object indicates the number of call 'RESYNC START' messages have been sent from the media gateway and have never received any response from the PNNI contr…
1.3.6.1.4.1.9.9.323.2NodecvaProfileMIBConformance
1.3.6.1.4.1.9.9.323.2.1NodecvaProfileMIBCompliances
1.3.6.1.4.1.9.9.323.2.1.1CompliancecvaProfileMIBCompliancedeprecatedThe Conformance groups.
1.3.6.1.4.1.9.9.323.2.1.2CompliancecvaProfileMIBComplianceRev1currentThe Conformance groups.
1.3.6.1.4.1.9.9.323.2.2NodecvaProfileMIBGroups
1.3.6.1.4.1.9.9.323.2.2.1GroupcvapCodecConfigGroupdeprecatedThis group contains objects related to CODEC configuration information.
1.3.6.1.4.1.9.9.323.2.2.2GroupcvapSvcConfigGroupcurrentThis group contains objects related to SVC configuration information.
1.3.6.1.4.1.9.9.323.2.2.3GroupcvapSvcStatsGroupcurrentThis group contains objects related to SVC statistics.
1.3.6.1.4.1.9.9.323.2.2.4GroupcvapCodecConfigGroupRev1currentThis group contains objects related to CODEC configuration information.
Type Definitions
NameSyntaxStatusDescription
CiscoAal2ProfileNumberINTEGER { profileITU1 (1), profileITU2 (2), profileITU3 (3), profileITU7 (7), profileITU8 (8), profileITU12 (12), profileCustom100 (100), profileCustom101 (101), profileCustom110 (110), profileCustom200 (200), profileCustom210 (210) }currentThis textual convention defines the profile number. A profile contains a set of entries, each entry specifies an encoding format with an UUI (User-to-User Indicator) range and length. The profile set defines a mapping t…
CiscoAal2ProfileTypeINTEGER { itu (1), custom (2) }currentIn VoATM, an AAL2 profile is used for the parameters of bearer traffic during the call setup between the call agent and the media gateway. In AAL2 profile negotiation, some call agents provide the profile, some do not. …
CiscoCodecPacketPeriodINTEGER { pktPeriod5000us (1), pktPeriod5500us (2), pktPeriod5785us (3), pktPeriod10000us (4), pktPeriod15000us (5), pktPeriod20000us (6), pktPeriod25000us (7), pktPeriod30000us (8), pktPeriod35000us (9), pktPeriod40000us (10), pktPeriod45000us (11), pktPeriod50000us (12), pktPeriod55000us (13), pktPeriod60000us (14), pktPeriod65000us (15), pktPeriod70000us (16), pktPeriod75000us (17), pktPeriod80000us (18), pktPeriod85000us (19), pktPeriod90000us (20) }currentThis type defines the packetization period for a particular CODEC in microseconds. The packetization period represents the time for the gateway to collect the data from TDM side before it sends out the packet.