MIB Viewer

CISCO-VOICE-CAS-MODULE-MIB

23 objects
This MIB is used to support Programmable CAS signaling Bit configuration on modules that support voice traffic. This MIB will enable programming of the CAS bits in order to translate incoming/outgoing bit patterns from/to the TDM or packet side interface. Terminology: ABCD - Signaling bits describing off-hook, on-hook, idle, flash, etc events. DSP - Digital Signal Processing CAS - Channal Associated Signaling E&M - Ear and Mouth Protocol TDM - Time Division Multiplexed
Imported Objects
CISCO-SMIciscoMgmt
CISCO-TCEntPhysicalIndexOrZero
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.389IdentityciscoVoiceCasModuleMIBThis MIB is used to support Programmable CAS signaling Bit configuration on modules that support voice traffic. This MIB will enable programming of the CAS bit…
1.3.6.1.4.1.9.9.389.0NodeciscoVoiceCasModuleNotifs
1.3.6.1.4.1.9.9.389.1NodeciscoVoiceCasModuleObjects
1.3.6.1.4.1.9.9.389.1.1NodecvcmCasConfig
1.3.6.1.4.1.9.9.389.1.1.1TablecvcmABCDBitTemplateConfigTablenot-accessiblecurrentThis table is used to configure templates on the module/card. These templates provide mapping information between the incoming CAS ABCD signaling bit patterns …
1.3.6.1.4.1.9.9.389.1.1.1.1RowcvcmABCDBitTemplateConfigEntrynot-accessiblecurrentAn entry in the table. Each entry consists of user defined CAS ABCD bit information to configure a transmit or received signaling channel on a DSP.
1.3.6.1.4.1.9.9.389.1.1.1.1.1ColumncvcmModuleIndexnot-accessiblecurrentThis object uniquely identifies the card/ module where this table resides. It could be the slot number of the module or be 1 where 'module' is not applicable.
1.3.6.1.4.1.9.9.389.1.1.1.1.2ColumncvcmCasTemplateIndexnot-accessiblecurrentThis object will index into the template that is configured in this table.
1.3.6.1.4.1.9.9.389.1.1.1.1.3ColumncvcmABCDPatternIndexnot-accessiblecurrentWill be used to index into a particular pattern mapping in the template that is configured. Since there are only 4 signaling bits (A, B, C, D), there can only …
1.3.6.1.4.1.9.9.389.1.1.1.1.4ColumncvcmModulePhysicalIndexread-onlycurrentThis object represents the entPhysicalIndex of the module where this table is being configured. If the entPhysicalTable is not supported on the SNMP agent, the…
1.3.6.1.4.1.9.9.389.1.1.1.1.5ColumncvcmCasTemplateNameread-createcurrentThis object identifies the name of the template configured. This object needs to be unique among all the instances of the cvcmABCDBitTemplateConfigTable. The S…
1.3.6.1.4.1.9.9.389.1.1.1.1.6ColumncvcmABCDIncomingPatternread-createcurrentThis object identifies the ABCD signaling bits that are received by the module. The actions specified in 'cvcmCasABitAction', 'cvcmCasBBitAction', 'cvcmCasCBit…
1.3.6.1.4.1.9.9.389.1.1.1.1.7ColumncvcmABCDOutgoingPatternread-onlycurrentThis object identifies the ABCD signaling bits defined by user, and downloaded to DSP signaling channel. This pattern is derived from the actions specified in …
1.3.6.1.4.1.9.9.389.1.1.1.1.8ColumncvcmCasABitActionread-createcurrentThis object identifies the action on the 'A' bit of the incoming ABCD bit pattern specified in cvcmABCDIncomingPattern. For this object, 'cvcmInvertBit' is sam…
1.3.6.1.4.1.9.9.389.1.1.1.1.9ColumncvcmCasBBitActionread-createcurrentThis object identifies the action on the 'B' bit of the incoming ABCD bit pattern specified in cvcmABCDIncomingPattern. For this object, 'cvcmInvertBit' is sam…
1.3.6.1.4.1.9.9.389.1.1.1.1.10ColumncvcmCasCBitActionread-createcurrentThis object identifies the action on the 'C' bit of the incoming ABCD bit pattern specified in cvcmABCDIncomingPattern. For this object, 'cvcmInvertBit' is sam…
1.3.6.1.4.1.9.9.389.1.1.1.1.11ColumncvcmCasDBitActionread-createcurrentThis object identifies the action on the 'D' bit of the incoming ABCD bit pattern specified in cvcmABCDIncomingPattern. For this object, 'cvcmInvertBit' is sam…
1.3.6.1.4.1.9.9.389.1.1.1.1.12ColumncvcmCasBitRowStatusread-createcurrentAn entry may be created using the 'createAndGo' option. When the row is successfully created, the object will be set to 'active' by the agent. An entry may be …
1.3.6.1.4.1.9.9.389.2NodecvcmMIBConformance
1.3.6.1.4.1.9.9.389.2.1NodecvcmMIBGroups
1.3.6.1.4.1.9.9.389.2.1.1GroupcvcmCasBitGroupcurrentA collection of objects used for configuring DSP signaling channel.
1.3.6.1.4.1.9.9.389.2.2NodecvcmMIBCompliances
1.3.6.1.4.1.9.9.389.2.2.1ComplianceciscoVoiceCasModuleMIBCompliancecurrentCompliance statement for CISCO-VOICE-CAS-MODULE-MIB.