CISCO-VOICE-IF-MIB
25 objects
Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN interfaces.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CountryCode |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.64 | IdentityciscoVoiceInterfaceMIB | Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN interfaces. | ||
| 1.3.6.1.4.1.9.9.64.1 | NodecvIfObjects | |||
| 1.3.6.1.4.1.9.9.64.1.1 | NodecvIfCfgObjects | |||
| 1.3.6.1.4.1.9.9.64.1.1.1 | TablecvIfCfgTable | not-accessible | current | The Voice Common Configuration Table. It contains information about the voice related configuration parameters for both analog and digital telephony interfaces. |
| 1.3.6.1.4.1.9.9.64.1.1.1.1 | RowcvIfCfgEntry | not-accessible | current | An entry in the configuration table for each voice analog interface or voice feature associated ISDN D channel. The entry is automatically created when a voice… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.1 | ColumncvIfCfgNoiseRegEnable | read-write | current | The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is enabled. |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.2 | ColumncvIfCfgNonLinearProcEnable | read-write | current | The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is enabled. |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.3 | ColumncvIfCfgMusicOnHoldThreshold | read-write | current | The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm. |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.4 | ColumncvIfCfgInGain | read-write | current | This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB se… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.5 | ColumncvIfCfgOutAttn | read-write | current | This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to t… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.6 | ColumncvIfCfgEchoCancelEnable | read-write | current | The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is enabled. |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.7 | ColumncvIfCfgEchoCancelCoverage | read-write | current | The object specifies the Echo Canceller coverage for the interface. This object is valid if the cvIfCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 … |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.8 | ColumncvIfCfgConnectionMode | read-write | current | The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface act… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.9 | ColumncvIfCfgConnectionNumber | read-write | current | This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the cvIfCfgConnectionMode is 'normal', then this object… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.10 | ColumncvIfCfgInitialDigitTimeOut | read-write | current | This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.11 | ColumncvIfCfgInterDigitTimeOut | read-write | current | This is the inter-digit timeout that indicates the amount of time the managed system waits for a subsequent input digit from the caller. The timer is started u… |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.12 | ColumncvIfCfgRegionalTone | read-write | current | This object contains the country specific setting for the tone, ring, cadence parameters to be used by this interface. |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.13 | ColumncvIfCfgEchoCancelWorstERL | read-write | current | The object specifies the worst case Echo Return Loss for which the echo canceller must operate. To some echo cancellers this object may not apply. This object … |
| 1.3.6.1.4.1.9.9.64.1.1.1.1.14 | ColumncvIfCfgEchoCanceller | read-only | current | The object specifies which echo canceller is present on the interface. echoCancellerStandard - for this echo canceller valid values of cvIfCfgEchoCancelCoverag… |
| 1.3.6.1.4.1.9.9.64.2 | NodecvIfConformance | |||
| 1.3.6.1.4.1.9.9.64.2.1 | NodecvIfCompliances | |||
| 1.3.6.1.4.1.9.9.64.2.1.1 | CompliancecvIfCompliance | read-only | current | The compliance statement for entities which implement the Cisco Voice Interface MIB |
| 1.3.6.1.4.1.9.9.64.2.2 | NodecvIfGroups | |||
| 1.3.6.1.4.1.9.9.64.2.2.1 | GroupcvIfGroup | current | A collection of objects providing the Common Voice parameter related configuration for both analog and digital voice interfaces. | |
| 1.3.6.1.4.1.9.9.64.2.2.2 | GroupcvIfConnectionGroup | current | A collection of objects providing trunking or PLAR (private line automatic ringdown) related configuration for voice analog interfaces. |