CISCO-VOICE-TONE-CADENCE-MIB
34 objects
The MIB defines the attributes of the programmable tones specified in ITU-T E.180 Supplement 2. Each country has its own regulation to the generation and detection of the call progressing tones such as dial tone, busy tone, ring back tone. The tone attributes are programmable, for example frequency, amplitude, cadence and duration of the tone.
Imported Objects
| CISCO-MEDIA-GATEWAY-MIB | cmgwIndex CVoiceTonePlanIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CountryCode |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.356 | IdentityciscoVoiceToneCadenceMIB | The MIB defines the attributes of the programmable tones specified in ITU-T E.180 Supplement 2. Each country has its own regulation to the generation and detec… | ||
| 1.3.6.1.4.1.9.9.356.0 | NodeciscoVoiceToneCadenceMIBNotifs | |||
| 1.3.6.1.4.1.9.9.356.1 | NodeciscoVoiceToneCadenceMIBObjects | |||
| 1.3.6.1.4.1.9.9.356.1.1 | NodecVoiceToneCadenceConfig | |||
| 1.3.6.1.4.1.9.9.356.1.1.1 | TablecvtcTonePlanTable | not-accessible | current | This table contains the configuration of tone plans for the programmable tones in different countries. |
| 1.3.6.1.4.1.9.9.356.1.1.1.1 | RowcvtcTonePlanEntry | not-accessible | current | An entry represents one tone plan which defines attributes of the programmable tones for a country. Each country can have more than one tone plans with differe… |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.1 | ColumncvtcTonePlanId | not-accessible | current | This object uniquely identifies the tone plan in the table. |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.2 | ColumncvtcTonePlanVifCount | read-only | current | This object indicates the number of voice interfaces are using the tone plan. |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.3 | ColumncvtcTonePlanCountry | read-create | current | This object specifies the country code (defined in ISO-3166) of the country that the tone plan is used for. The country specified by the country code should be… |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.4 | ColumncvtcTonePlanVersion | read-create | current | This object specifies the version of the tone plan for a country. One country may have many tone plans, therefore they may have the same country name, but the … |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.5 | ColumncvtcTonePlanFileName | read-create | current | This object specifies the valid file name stored on the media gateway's harddisk. The tone plan file can be transferred to the media gateway via FTP text file … |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.6 | ColumncvtcTonePlanStorageType | read-only | current | This object specifies the storage type for this conceptual row. If this conceptual row represents a system built-in tone plan, the value of this object is read… |
| 1.3.6.1.4.1.9.9.356.1.1.1.1.7 | ColumncvtcTonePlanRowStatus | read-create | current | The entries for The system built-in tone plans will be added by the system at start-up, they can not be added, modified or deleted by user. |
| 1.3.6.1.4.1.9.9.356.1.1.2 | TablecvtcToneIdTable | not-accessible | current | This table contains the identification of the programmable tones. |
| 1.3.6.1.4.1.9.9.356.1.1.2.1 | RowcvtcToneIdEntry | not-accessible | current | An entry represents the identification for one programmable tone in a tone plan. |
| 1.3.6.1.4.1.9.9.356.1.1.2.1.1 | ColumncvtcToneId | not-accessible | current | This object uniquely identifies the programmable tone in a tone plan. |
| 1.3.6.1.4.1.9.9.356.1.1.2.1.2 | ColumncvtcToneName | read-create | current | This object specified the name of the programmable tone. |
| 1.3.6.1.4.1.9.9.356.1.1.2.1.3 | ColumncvtcToneIdRowStatus | read-create | current | The entries for ITU defined tones will be added by the system at start-up. |
| 1.3.6.1.4.1.9.9.356.1.1.3 | TablecvtcProgrammableToneTable | not-accessible | current | This table contains the configurable attributes of the programmable tones for tone plan. |
| 1.3.6.1.4.1.9.9.356.1.1.3.1 | RowcvtcProgrammableToneEntry | not-accessible | current | An entry represents the configurable attributes for one programmable tone in a tone plan. The tone attributes are specified in ITU E.180 Supplement 2. |
| 1.3.6.1.4.1.9.9.356.1.1.3.1.1 | ColumncvtcProgrammableToneFrequency | read-create | current | This object specified the frequency of the tone to be played or detected. |
| 1.3.6.1.4.1.9.9.356.1.1.3.1.2 | ColumncvtcProgrammableToneAmplitude | read-create | current | This object specified the amplitude expression of the tone to be played or detected. |
| 1.3.6.1.4.1.9.9.356.1.1.3.1.3 | ColumncvtcProgrammableToneCadence | read-create | current | This object specified the cadence of the tone to be played or detected. |
| 1.3.6.1.4.1.9.9.356.1.1.3.1.4 | ColumncvtcProgrammableToneDuration | read-create | current | This object specified the duration of the tone will be played. The value of 0 indicates that the tone will be played infinitely unless interrupted. |
| 1.3.6.1.4.1.9.9.356.1.1.3.1.5 | ColumncvtcProgrammableToneStorageType | read-create | current | This object specifies the storage type for this conceptual row. If this conceptual row represents a programmable tone in a system built-in tone plan, the value… |
| 1.3.6.1.4.1.9.9.356.1.1.3.1.6 | ColumncvtcProgrammableToneRowStatus | read-create | current | This object is used to add, delete or modify the entry of the table. When an entry is created, the following objects have to be provided: cvtcProgrammableToneF… |
| 1.3.6.1.4.1.9.9.356.3 | NodeciscoVoiceToneCadenceMIBConform | |||
| 1.3.6.1.4.1.9.9.356.3.1 | NodecVoiceToneCadenceCompliances | |||
| 1.3.6.1.4.1.9.9.356.3.1.1 | CompliancecVoiceToneCadenceCompliance | current | The compliance statement for entities which implement the CISCO-VOICE-TONE-CADENCE-MIB | |
| 1.3.6.1.4.1.9.9.356.3.2 | NodecVoiceToneCadenceGroups | |||
| 1.3.6.1.4.1.9.9.356.3.2.1 | GroupcvtcToneConfigGroup | current | The collection of objects providing programmable tones and tone plans. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CToneAmplitude | OCTET STRING (SIZE(2..64)) | current | This Textual Convention defines amplitude expression of the programmable tone to be played or detected. This textual convention is a combination of Amplitude Expression, Amplitude conjuncture and Amplitude delimiter. Am… |
| CToneCadence | OCTET STRING (SIZE(3..64)) | current | This Textual Convention defines cadence of the programmable tone to be played or detected. The format of cadence of the programmable tone is based on ITU E.180 Supplement 2. Cadence string consists of cadence units, dig… |
| CToneFrequency | OCTET STRING (SIZE(1..64)) | current | This Textual Convention defines frequency of the programmable tone to be played or detected. The format of frequency of the programmable tone is based on ITU E.180 Supplement 2. The frequency octet string is a combinati… |