CISCO-VPC-MIB
74 objects
This MIB module defines MIB objects which provide management information for configuring and monitoring of Virtual Port Channel(VPC) on Cisco devices. The following terms are used throughout this MIB: ISSU: In Service Software Upgrade ToS: Type of Service UDP: User Datagram Protocol VPC: Virtual Port Channel VRF: Virtual Routing and Forwarding
Imported Objects
| CISCO-SMI | ciscoMgmt |
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.807 | IdentityciscoVpcMIB | This MIB module defines MIB objects which provide management information for configuring and monitoring of Virtual Port Channel(VPC) on Cisco devices. The foll… | ||
| 1.3.6.1.4.1.9.9.807.0 | NodeciscoVpcMIBNotifs | |||
| 1.3.6.1.4.1.9.9.807.1 | NodeciscoVpcMIBObjects | |||
| 1.3.6.1.4.1.9.9.807.1.1 | NodecVpcPeerKeepAlive | |||
| 1.3.6.1.4.1.9.9.807.1.1.1 | TablecVpcPeerKeepAliveConfigTable | not-accessible | current | The table contains the VPC peer-keepalive link and message configuration information in the managed device. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1 | RowcVpcPeerKeepAliveConfigEntry | not-accessible | current | An entry containing VPC peer-keepalive link and message configuration information. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.1 | ColumncVpcPeerKeepAliveConfigDomainID | not-accessible | current | An arbitrary value to uniquely identify the VPC management domain on the local system. Value zero indicates no VPC management domain has been configured for th… |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.2 | ColumncVpcPeerKeepAliveDestAddrType | read-write | current | This object specifies type of Internet address of destination address for peer device. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.3 | ColumncVpcPeerKeepAliveDestAddr | read-write | current | This object specifies destination ip address of peer device. The type of this address is determined by the cVpcPeerKeepAliveDestAddrType object. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.4 | ColumncVpcPeerKeepAliveSourceAddrType | read-write | current | This object specifies type of Internet address of source address used for peer-keepalive hello messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.5 | ColumncVpcPeerKeepAliveSourceAddr | read-write | current | This object specifies source address used in this peer-keepalive hello messages. The type of this address is determined by the cVpcPeerKeepAliveSourceAddrType … |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.6 | ColumncVpcPeerKeepAliveUdpPort | read-write | current | This object specifies UDP Port number used for peer-keepalive hello messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.7 | ColumncVpcPeerKeepAliveInterval | read-write | current | This object specifies the interval of peer-keepalive hello messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.8 | ColumncVpcPeerKeepAliveTimeout | read-write | current | This object specifies the timeout of peer-keepalive hello messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.9 | ColumncVpcPeerKeepAliveHoldTimeout | read-write | current | This object specifies hold timeout to ignore stale peer alive messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.10 | ColumncVpcPeerKeepAliveTos | read-write | current | This object specifies the ToS value used for peer-keepalive hello messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.11 | ColumncVpcPeerKeepAlivePrecedence | read-write | current | This object specifies the Precedence value used for peer-keepalive hello messages. |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.12 | ColumncVpcPeerKeepAliveTosByte | read-write | current | This object specifies the ToS-Byte value used for peer-keepalive messages. Only low eight-bit byte of this double word is used. Bit 0 is reserved. Bits 1 to 5 … |
| 1.3.6.1.4.1.9.9.807.1.1.1.1.13 | ColumncVpcPeerKeepAliveVrfName | read-write | current | This object specifies the VRF name to be used for peer-keepalive messages routing. |
| 1.3.6.1.4.1.9.9.807.1.1.2 | TablecVpcPeerKeepAliveTable | not-accessible | current | The table contains the VPC peer-keepalive link status information in the managed device. |
| 1.3.6.1.4.1.9.9.807.1.1.2.1 | RowcVpcPeerKeepAliveEntry | not-accessible | current | An entry containing VPC peer-keepalive link status information. |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.1 | ColumncVpcPeerKeepAliveDomainID | not-accessible | current | An arbitrary value to uniquely identify the VPC management domain on the local system. Value zero indicates there is no VPC management domain being configured … |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.2 | ColumncVpcPeerKeepAliveStatus | read-only | current | This object indicates VPC peer keep-alive status. disabled(1) : Peer-keepalive is disabled. alive(2) : Peer-keepalive is alive. peerUnreachable(3) : Peer is un… |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.3 | ColumncVpcPeerKeepAliveTime | read-only | current | This object indicates the time (in msec) since the peer became alive. It will hold value 0 if peer-keepalive never becomes alive. |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.4 | ColumncVpcPeerKeepAliveMsgSendStatus | read-only | current | This object indicates VPC peer keep-alive message sending status. |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.5 | ColumncVpcPeerKeepAliveMsgLastSendTime | read-only | current | This object indicates date and time of VPC peer keep-alive message last send. This object contains value 0x0000010100000000, if peer-keepalive message has neve… |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.6 | ColumncVpcPeerKeepAliveMsgSendInterface | read-only | current | This object indicates the ifIndex of interface of VPC peer keep-alive message sent on. |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.7 | ColumncVpcPeerKeepAliveMsgRcvrStatus | read-only | current | This object indicates VPC peer keep-alive message receiving status. |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.8 | ColumncVpcPeerKeepAliveMsgLastReceiveTime | read-only | current | This object indicates date and time of VPC peer keep-alive message last received. This object contains value 0x0000010100000000, if peer-keepalive message has … |
| 1.3.6.1.4.1.9.9.807.1.1.2.1.9 | ColumncVpcPeerKeepAliveMsgReceiveInterface | read-only | current | This object indicates the ifIndex of interface of VPC peer keep-alive message last received. |
| 1.3.6.1.4.1.9.9.807.1.2 | NodecVpcRole | |||
| 1.3.6.1.4.1.9.9.807.1.2.1 | TablecVpcRoleTable | not-accessible | current | The table contains the VPC role status information in the managed device. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1 | RowcVpcRoleEntry | not-accessible | current | An entry containing VPC role information. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.1 | ColumncVpcRoleDomainID | not-accessible | current | An arbitrary value to uniquely identify the VPC management domain on the local system. Value zero indicates there is no VPC management domain being configured … |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.2 | ColumncVpcRoleStatus | read-only | current | This object indicates the VPC role status of the peer device. primarySecondary(1) : primary, and operational secondary. primary(2) : primary, and operational p… |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.3 | ColumncVpcDualActiveDetectionStatus | read-only | current | This object indicates the dual active detection status of peer device. true(1) : indicate that Dual Active is detected. false(2) : indicate that Dual Active is… |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.4 | ColumncVpcSystemAdminMacAddress | read-write | current | This object specifies VPC system MAC address. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.5 | ColumncVpcSystemOperMacAddress | read-only | current | This object indicates VPC system operational MAC address. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.6 | ColumncVpcLocalOperMacAddress | read-only | current | This object indicates VPC local system operational MAC address. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.7 | ColumncVpcSystemAdminPriority | read-write | current | This object specifies VPC system priority. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.8 | ColumncVpcSystemOperPriority | read-only | current | This object indicates VPC system operational priority. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.9 | ColumncVpcLocalRoleAdminPriority | read-write | current | This object specifies VPC local role priority. |
| 1.3.6.1.4.1.9.9.807.1.2.1.1.10 | ColumncVpcLocalRoleOperPriority | read-only | current | This object indicates VPC local role operational priority. |
| 1.3.6.1.4.1.9.9.807.1.3 | NodecVpcStatistics | |||
| 1.3.6.1.4.1.9.9.807.1.3.1 | TablecVpcStatsPeerKeepAliveTable | not-accessible | current | The table contains the statistics of VPC peer-keepalive messages in the managed device. |
| 1.3.6.1.4.1.9.9.807.1.3.1.1 | RowcVpcStatsPeerKeepAliveEntry | not-accessible | current | An entry containing statistics of the VPC peer-keepalive messages. |
| 1.3.6.1.4.1.9.9.807.1.3.1.1.1 | ColumncVpcStatsPeerKeepAliveDomainID | not-accessible | current | An arbitrary value to uniquely identify the VPC management domain on the local system. Value zero indicates there is no VPC management domain being configured … |
| 1.3.6.1.4.1.9.9.807.1.3.1.1.2 | ColumncVpcStatsPeerKeepAliveMsgsSent | read-only | current | This object indicates the number of peer-keepalive messages sent to peer. |
| 1.3.6.1.4.1.9.9.807.1.3.1.1.3 | ColumncVpcStatsPeerKeepAliveMsgsRcved | read-only | current | This object indicates the number of peer-keepalive messages received from peer. |
| 1.3.6.1.4.1.9.9.807.1.3.1.1.4 | ColumncVpcStatsPeerKeepAliveAvgInterval | read-only | current | This object indicates the average interval for the peer-keepalive messages received from peer. |
| 1.3.6.1.4.1.9.9.807.1.3.1.1.5 | ColumncVpcStatsPeerStatusChangeCount | read-only | current | This object indicates the number of times that the peer status gets changed. |
| 1.3.6.1.4.1.9.9.807.1.4 | NodecVpcStatus | |||
| 1.3.6.1.4.1.9.9.807.1.4.1 | TablecVpcStatusPeerLinkTable | not-accessible | current | The table contains the list of VPC peer-links in the managed device. |
| 1.3.6.1.4.1.9.9.807.1.4.1.1 | RowcVpcStatusPeerLinkEntry | not-accessible | current | An entry containing VPC peer-link management information applicable to a particular VPC domain. |
| 1.3.6.1.4.1.9.9.807.1.4.1.1.1 | ColumncVpcStatusPeerLinkDomainID | not-accessible | current | An arbitrary value to uniquely identify the VPC management domain. |
| 1.3.6.1.4.1.9.9.807.1.4.1.1.2 | ColumncVpcStatusPeerLinkIfIndex | read-only | current | The value of the ifIndex corresponding to the peer link of this VPC domain. |
| 1.3.6.1.4.1.9.9.807.1.4.2 | TablecVpcStatusHostLinkTable | not-accessible | current | The table contains the VPC host-link summary information in the managed device. |
| 1.3.6.1.4.1.9.9.807.1.4.2.1 | RowcVpcStatusHostLinkEntry | not-accessible | current | An entry containing VPC host-link summary information. |
| 1.3.6.1.4.1.9.9.807.1.4.2.1.1 | ColumncVpcStatusHostLinkDomainID | not-accessible | current | An arbitrary value to uniquely identify the VPC management domain. |
| 1.3.6.1.4.1.9.9.807.1.4.2.1.2 | ColumncVpcStatusHostLinkVpcID | not-accessible | current | An arbitrary value to uniquely identify a VPC link between the host and the switch for a given VPC management domain. |
| 1.3.6.1.4.1.9.9.807.1.4.2.1.3 | ColumncVpcStatusHostLinkIfIndex | read-only | current | The value of the ifIndex corresponding to a host-link interface. |
| 1.3.6.1.4.1.9.9.807.1.4.2.1.4 | ColumncVpcStatusHostLinkStatus | read-only | current | This object indicates the current status of VPC host-link. down(1) : Host link is down. downStar(2) : Local host link is down, forwarding via vPC peer-link. up… |
| 1.3.6.1.4.1.9.9.807.1.4.2.1.5 | ColumncVpcStatusHostLinkConsistencyStatus | read-only | current | This object indicates the status of configuration consistency check of this VPC host link. |
| 1.3.6.1.4.1.9.9.807.1.4.2.1.6 | ColumncVpcStatusHostLinkConsistencyDetail | read-only | current | This object indicates the reason of consistency check status change detail. |
| 1.3.6.1.4.1.9.9.807.2 | NodeciscoVpcMIBConformance | |||
| 1.3.6.1.4.1.9.9.807.2.1 | NodeciscoVpcMIBCompliances | |||
| 1.3.6.1.4.1.9.9.807.2.1.1 | ComplianceciscoVpcMIBCompliance | read-only | current | The compliance statement for CISCO-VPC-MIB. |
| 1.3.6.1.4.1.9.9.807.2.2 | NodeciscoVpcMIBGroups | |||
| 1.3.6.1.4.1.9.9.807.2.2.1 | GroupcVpcPeerKeepAliveConfigInfoGroup | current | A collection of objects providing peer-keepalive link and messages configuration information. | |
| 1.3.6.1.4.1.9.9.807.2.2.2 | GroupcVpcPeerKeepAliveStatusInfoGroup | current | A collection of objects providing peer-keepalive status information. | |
| 1.3.6.1.4.1.9.9.807.2.2.3 | GroupcVpcMIBRoleGroup | current | A collection of objects providing peer-keepalive role information. | |
| 1.3.6.1.4.1.9.9.807.2.2.4 | GroupcVpcMIBStatisticsGroup | current | A collection of objects providing peer-keepalive statistics information. | |
| 1.3.6.1.4.1.9.9.807.2.2.5 | GroupcVpcMIBPeerLinkStatusGroup | current | A collection of objects providing peer-link status information | |
| 1.3.6.1.4.1.9.9.807.2.2.6 | GroupcVpcMIBHostLinkStatusGroup | current | A collection of objects providing host-link VPC status information. |