CISCO-WAN-CES-CONN-MIB
68 objects
The MIB module to configure the Circuit Emulation connections in MGX82xx series products. Terminology: CES : Circuit Emulation Service. The CES defines a method of carrying a traffic from non-ATM telephony devices over an ATM cloud. The CES provides an interworking function(IWF) that allows the two protocols to communicate. channel , endpoint : channel and connection endpoint have same meaning and are used interchangebly. DAX Connection : Digital Access and Cross-connect connection is a connection where master and slave endpoints are with in the same MGX shelf. CAS : Channel Associated Signaling. This is in-band signaling. CCS : Common Channel Signaling. This is is out-of-band signaling.
Imported Objects
| BASIS-MIB | cesmChan circuitEmulation |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.3.2.1 | NodecesmChanCnfGrp | |||
| 1.3.6.1.4.1.351.110.5.3.2.1.1 | TablecesmChanCnfGrpTable | not-accessible | current | This table contains the configuration information for connection endpoints. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1 | RowcesmChanCnfGrpEntry | not-accessible | current | An entry in the cesmChanCnfGrpTable. The each entry corresponds to a connection endpoint identified by following objects: - cesCnfChanNum : Channel Number - ce… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.1 | ColumncesCnfChanNum | read-only | current | This object identifies the channel number of the CESM channel. For CESM-4P the range is 16..19 (only for 4 entries). For CESM-8t1 the range is 16..192 For CESM… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.2 | ColumncesChanRowStatus | read-write | current | This object is used to create,modify or delete an entry in the table. A row need to be created using 'add' option. When the row is successfully created, this o… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.3 | ColumncesMapPortNum | read-only | current | This object provides the mapping from CES channel number and physical line number. In case of CESM-4P this variable specifies the port number to which this cha… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.4 | ColumncesMapVpi | read-only | current | The value of this object is equal to the VPI used for the emulated circuit represented by this connection. In MGX8220( formerly AXIS) Implementaion slot number… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.5 | ColumncesMapVci | read-only | current | This specifies VCI for emulated circuit represented by this VC. Our Implementation cesCnfChanNum will be used for this. In case of CESM-4P valid range is 16..1… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.6 | ColumncesCBRService | read-only | current | This specifies data type supported by the CBR service. unstructured(1) : This is also known as 'clear channel'. This service utilizes the entire T1 bandwidth. … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.7 | ColumncesCBRClockMode | read-write | current | This specifies clocking mode of the CBR service. synchronous(1) : The transmit clock frequency is produced by an external source. srts (2) : Synchronous Residu… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.8 | ColumncesCas | read-write | current | This object specifies whether CAS bits are carried by the service. This also selects which AAL1 format should be used. The possible values are : basic(1) : for… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.9 | ColumncesPartialFill | read-write | current | Specifies the number of user octets per cell, if partial cell fill is used. 47 means partial fill disabled. Partial fill is not supported in CESM-4P Ranges for… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.10 | ColumncesBufMaxSize | read-write | current | Specifies the maximum size in octets of egress buffer. CESM - 4P: Should be at least 0.6*CDVRxT for a T1 line and 0.7 * CDVRxT for a E1 line. 0 can be specifie… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.11 | ColumncesCDVRxT | read-write | current | This object specifies maximum cell arrival jitter that the reassembly process will tolerate. In case of CESM-8P it should be in increment of 125 micro secs and… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.12 | ColumncesCellLossIntegrationPeriod | read-write | current | This object specifies the cell loss integration period. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.13 | ColumncesChanLocRmtLpbkState | read-write | current | Loopback on cellbus in egress direction. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.14 | ColumncesChanTestType | read-write | current | This is the type of the test 1 = Test Continuity 2 = Test Delay 3 = no test is initated 4 = test continuity with sti cell format 5 = test delay with sti cell f… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.15 | ColumncesChanTestState | read-only | current | This shows the state of the test 1 = Passed 2 = Failed 3 = In Progress 4 = Not In Progress |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.16 | ColumncesChanRTDResult | read-only | current | This is round trip delay time. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.17 | ColumncesChanPortNum | read-write | current | This object refers to the CES logical port on which channel is created. The value for this object must be same as the 'cesPortNum' object from cesmPortCnfGrpTa… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.18 | ColumncesChanConnType | read-write | current | This object identifies the type of the connection. The possible values are : pvc(1) : Permanent Virtual Connection svc(2) : Switched Virtual Connection spvc(3)… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.19 | ColumncesChanStrauSciNum | read-write | current | This indicates the type of connection. 1 = Normal Channel (nonStrauChannel(0) ) 2 = SCI 1 i.e bit 1 & 2 3 = SCI 2 i.e bit 3 & 4 4 = SCI 3 i.e bit 5 & 6 5 = SCI… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.20 | ColumncesChanIdleDetEnable | read-write | current | This indicates the type of Idle detection enabled disable(1) : Idle code detection is disabled. enableOnhookDet(2) : Enable Idle detection whenver it detects O… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.21 | ColumncesChanIdleSignalCode | read-write | current | This object identifies the signal code to be sent. The value indicates the idle pattern in DS0 time slots. This object is applicable only when cesChanIdleDetEn… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.22 | ColumncesChanIdleCodeIntgnPeriod | read-write | current | This object indicates the Integration period in seconds This object is applicable only when cesChanIdleDetEnable is set to enableIdlePatternDet(3). |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.23 | ColumncesChanOnhookCode | read-write | current | This object identifies the on-hook code to be sent. This object is applicable only when cesChanIdleDetEnable object is set to enableOnhookDet(2). The value 0..… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.24 | ColumncesChanConditionedData | read-write | current | This byte will indicate Idle data to be sent towards the line whenever channels goes in to Underrun Only applicable for CESM-8T1/E1. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.25 | ColumncesmChanExtTrgIdleSupp | read-write | current | This object is used for disabling/enabling idle suppression on the connection. This can be set by external signalling device. Only applicable to CESM-8T1/E1. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.26 | ColumncesmChanConditionedSigCode | read-write | current | This byte will indicate Signal code to be sent sent towards the line whenever channels goes in to Underrun Only applicable to CESM-8T1/E1. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.27 | ColumncesLocalVpi | read-only | current | This object identifies the internal VPI assigned to a local endpoint, by the switch. The cesLocalVpi, cesLocalVci and cesLocalNSAP form a unique identifier for… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.28 | ColumncesLocalVci | read-only | current | This object identifies the internal VCI assigned to a local endpoint, by the switch. The cesLocalVpi, cesLocalVci and cesLocalNSAP form a unique identifier for… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.29 | ColumncesLocalNSAP | read-write | current | This object identifies the internal NSAP address assigned to local endpoint. The NSAP address is 20 bytes long and follows the format: - 13 bytes as prefix 2 b… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.30 | ColumncesRemoteVpi | read-write | current | This object identifies the VPI value of the peer endpoint. The cesRemoteVpi, cesRemoteVci and the cesRemoteNSAP identify the peer endpoint(remote) in the netwo… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.31 | ColumncesRemoteVci | read-write | current | This object identifies the VCI value of the peer endpoint. The cesRemoteVpi, cesRemoteVci and the cesRemoteNSAP identify the peer endpoint(remote) in the netwo… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.32 | ColumncesRemoteNSAP | read-write | current | This object identifies the NSAP address of the peer endpoint. The NSAP address is 20 bytes long and follows the format: - 13 bytes as prefix 2 bytes for Cisco … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.33 | ColumncesMastership | read-write | current | This is used by PXM to determine if this end point is master or slave, a new type unknown(3) is added to identify the SM in MGX8220(formerly AXIS) shelf and th… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.34 | ColumncesVpcFlag | read-write | current | This represents the connection type, used for PXM to identify VPC/VCC but CESM card doesn't use it always set to vcc for CESM card. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.35 | ColumncesConnServiceType | read-write | current | This specifies the service type 1 ==> Constant Bit Rate 2 ==> Variable Bit Rate 3 ==> Not used 4 ==> Unspecified Bit Rate 5 ==> ATM frame relay 6 ==> standard … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.36 | ColumncesRoutingPriority | read-write | current | This is used by PXM to determine how important this connection is when selecting connections to route. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.37 | ColumncesMaxCost | read-write | current | This object is used by the networking entity to select a route based on administrative weight of possible routes. It is related to Cost Based Routing. This is … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.38 | ColumncesRestrictTrunkType | read-write | current | Restricted trunk type for routing, used by PXM. It specifies that the connection either cannot be routed over satelite trunks, or terrestrial trunks, or it can… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.39 | ColumncesConnPCR | read-write | current | This object identifies the Peak Cell Rate(PCR) value. If not provided during the row creation, the value will be computed as follows, For CESM-8T1/E1 - N * 64 … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.40 | ColumncesConnMCR | read-write | current | This object identifies the Minimum Cell Rate(MCR) value. If not provided during the row creation, the value will be computed as follows, For CESM-8T1/E1 - N * … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.41 | ColumncesConnPercentUtil | read-write | current | This is the expected long-term utilization of the channel by theis end-point. For CESM-8T1/E1/T3/E3 , the value is 100% |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.42 | ColumncesmConnRemotePCR | read-write | current | The PCR value of the remote end. If not set, the value for this object is derived from the end point parameter. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.43 | ColumncesmConnRemoteMCR | read-write | current | The MCR value of the remote end. If not set, the value for this object is derived from the end point parameter. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.44 | ColumncesmConnRemotePercentUtil | read-write | current | This is the expected long-term utilization of the channel by the other end-point. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.45 | ColumncesmConnForeSightEnable | read-write | current | This object is used by the controller(PAR/PNNI/TAG) to set up the Qbin for the connection. This is notapplicable to CESM-8T1/E1/T3/E3. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.46 | ColumncesmConnFGCRAEnable | read-write | current | enables/disables Frame based GCRA (early packet discard). This is not applicable to CESM-8T1/E1/T3/E3. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.47 | ColumncesmChanReroute | read-write | current | This is used by the administrator to trigger the re-routing of the connection. The rerouting takes effect, when this object is set to true(1). When set to fals… |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.48 | ColumncesmConnAdminStatus | read-write | current | This object specifies administrative status of the connection endpoint. This object is not applicable to MGX Release 1.x. |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.49 | ColumncesmChanPrefRouteId | read-write | current | This object serves to to associate a preferred route with a connection. The value '0' means no preferred route is associated with this connection. Usage: - If … |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.50 | ColumncesmChanDirectRoute | read-write | current | This object serves to associate a prefer route as directed route (correspond to the prefer route object cesmChanPrefRouteId). A directed route specifies that t… |
| 1.3.6.1.4.1.351.110.5.3.2.1.2 | ScalarcesmChanNumNextAvailable | read-only | current | This variable contains the next unused channel number of the possible 248. This number can be used in channel config table. cesChanNumNextAvailable gets update… |
| 1.3.6.1.4.1.351.110.5.3.3 | NodecesmEndPtMapGrp | |||
| 1.3.6.1.4.1.351.110.5.3.3.1 | TablecesmEndPtMapGrpTable | not-accessible | current | This is the Endpoint mapping table for CES connection. |
| 1.3.6.1.4.1.351.110.5.3.3.1.1 | RowcesmEndPtMapGrpEntry | not-accessible | current | An entry for cesmEndPtMapGrpEntry. |
| 1.3.6.1.4.1.351.110.5.3.3.1.1.1 | ColumncesEndPortNum | read-only | current | This object identifies the CES logical port. The value for this object must be same as 'cesPortNum' object from cesmPortCnfGrpTable. |
| 1.3.6.1.4.1.351.110.5.3.3.1.1.2 | ColumncesEndChanNum | read-only | current | This object identifies the CES connection number. The value of this object is same as the value of 'cesCnfChanNum' object in cesmChanCnfGrpTable. |
| 1.3.6.1.4.1.351.110.5.3.3.1.1.3 | ColumncesEndLineNum | read-only | current | This object identifies the physical line on which connection is provisioned. The value in this object object must match with the value specified in 'cesPortLin… |
| 1.3.6.1.4.1.351.150.42 | IdentityciscoWanCesConnMIB | The MIB module to configure the Circuit Emulation connections in MGX82xx series products. Terminology: CES : Circuit Emulation Service. The CES defines a metho… | ||
| 1.3.6.1.4.1.351.150.42.2 | NodeciscoWanCesConnMIBConformance | |||
| 1.3.6.1.4.1.351.150.42.2.1 | NodeciscoWanCesConnMIBGroups | |||
| 1.3.6.1.4.1.351.150.42.2.1.1 | GroupciscoWanCesConnGroup | current | A collection of objects providing information applicable to CES Connections. | |
| 1.3.6.1.4.1.351.150.42.2.1.2 | GroupciscoWanCesConnEndptGroup | current | A collection of objects related to End Point mapping in circuit emulation connections. | |
| 1.3.6.1.4.1.351.150.42.2.1.3 | GroupciscoWanCesConnGeneralGroup | current | A collection of objects related to next available channeli number and next available VPI value of connections supported. | |
| 1.3.6.1.4.1.351.150.42.2.2 | NodeciscoWanCesConnMIBCompliances | |||
| 1.3.6.1.4.1.351.150.42.2.2.1 | ComplianceciscoWanCesConnCompliance | current | The compliance statement for SNMP entities which support Frame realy connection MIB. |