MIB Viewer

CISCO-WAN-CES-CONN-STAT-MIB

30 objects
The MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, MGX88xx products. The channels and connections are used interchangeably in this mib. Terminologies Used: PXM : Processor Switch Service Module. This is the controller card used in MGX switches. CESM : Circuit Emulation Service Module. The Card supporting Circuit Emulation Service.
Imported Objects
BASIS-MIBcesmChan
CISCOWAN-SMIciscoWan
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.351.110.5.3.2.2NodecesmChanCntGrp
1.3.6.1.4.1.351.110.5.3.2.2.1TablecesmChanCntGrpTablenot-accessiblecurrentThe statistics table for CES connections. For every entry in cesmChanCnfGrpTable, there will be an entry in this table.
1.3.6.1.4.1.351.110.5.3.2.2.1.1RowcesmChanCntGrpEntrynot-accessiblecurrentAn entry in the CES connection statistics table.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.1ColumncesCntChanNumread-onlycurrentThis object identifies the channel number of the CESM channel. The value for this object is same as the value specified in 'cesCnfChanNum'.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.2ColumncesChanStateread-onlycurrentThis object indicates the channel/connection status. The possible value(s) are : notConfigured (1) : Channel is not configured okay (2) : channel is ok alarm (…
1.3.6.1.4.1.351.110.5.3.2.2.1.1.3ColumncesXmtATMStateread-onlycurrentThis object indicates the transmit state of channel on the ATM side (towards the network). The possible value(s) are : other(1) : values other than mentioned b…
1.3.6.1.4.1.351.110.5.3.2.2.1.1.4ColumncesRcvATMStateread-onlycurrentThis variable indicates the receive state of channel on the ATM side (from the network). The possible value(s) are : other(1) : values other than mentioned bel…
1.3.6.1.4.1.351.110.5.3.2.2.1.1.5ColumncesCellLossStatusread-onlycurrentWhen cells are lost for the CellLossIntegrationPeriod the value is set to loss ( 2). when cells are no longer lost, the value is set to noLoss(1).
1.3.6.1.4.1.351.110.5.3.2.2.1.1.6ColumncesReassCellsread-onlycurrentThe number of cells played out to T1/E1/T3E3 interface. It excludes cells that were discarded for any reason.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.7ColumncesGenCellsread-onlycurrentThe number of cells generated from T1/E1/T3E3 interface and sent towards network.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.8ColumncesHdrErrorsread-onlycurrentThe number of AAL-1 header errors detected and possibly corrected. Header errors include correctable and uncor- rectable CRC, plus bad parity.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.9ColumncesPointerReframesread-onlycurrentThe number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected and the and the pointer must be reacquired. Not suppor…
1.3.6.1.4.1.351.110.5.3.2.2.1.1.10ColumncesLostCellsread-onlycurrentThe number of cells lost in egress direction due to AAL 1 header errors and missing cells.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.11ColumncesBufUnderflowsread-onlycurrentThe number of buffer underflows in Egress direction Not supported in CESM-8P due limitation in AAL1 SAR.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.12ColumncesBufOverflowsread-onlycurrentThe number of buffer overflows in Egress direction Not supported in CESM-8P due to limitation in AAL1 SAR.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.13ColumncesIngrDiscardedBytesread-onlycurrentThe number of bytes discarded due to shelf alarm in ingress direction from port data. Not supported in CESM-8P.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.14ColumncesUflowInsCellsread-onlycurrentThe number of All 1's cells inserted in case of Egress Buffer Underflow Not supported in CESM-8P.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.15ColumncesOflowDropBytesread-onlycurrentThe number of bytes discarded in Egress direction because of Egress buffer overflow Not supported in CESM-8P.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.16ColumncesCellSeqMismatchCntread-onlycurrentThe number of times SAR received a valid out of sequence AAL-1 cell from CellBus.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.17ColumncounterClrButtonread-writecurrentThis object is used for clearing the counters in this table. If set to resetCounters(2), then counters will be cleared.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.18ColumncesChanSecUptimeread-onlycurrentThe number of seconds channel is in service This object is only applicable for CESM-8P.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.19ColumncesChanSignalingStatusread-onlycurrentThis variable indicates the connection signalling status Connection will be in Idle suppression mode if it in on-hook. Not applicable for T3E3 and CESM-4P.
1.3.6.1.4.1.351.110.5.3.2.2.1.1.20ColumncesChanStatusBitMapread-onlycurrentThis variable indicates the consolidated bit map of the channel alarm state. Individual bit positions are as defined below. Bit position Fail/Alarm Reason 0 Al…
1.3.6.1.4.1.351.150.43IdentityciscoWanCesConnStatMIBThe MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, MGX88xx products. The channe…
1.3.6.1.4.1.351.150.43.2NodecwcConnStatMIBConformance
1.3.6.1.4.1.351.150.43.2.1NodecwcConnStatMIBGroups
1.3.6.1.4.1.351.150.43.2.1.1GroupcwcConnGenStatsGroupcurrentThe objects related to Circuit Emulation connection statistics applicable for multiple cards(Service Modules).
1.3.6.1.4.1.351.150.43.2.1.2GroupcwcConnStatsGroupcurrentThe objects related to Circuit Emulation connection statistics applicable for few cards(Service Module).
1.3.6.1.4.1.351.150.43.2.2NodecwcConnStatMIBCompliances
1.3.6.1.4.1.351.150.43.2.2.1CompliancecwcConnStatCompliancecurrentThe compliance statement for broad band interface Connection Statistics MIB.