CISCO-WAN-CES-PORT-MIB
31 objects
The MIB module to configure the Circuit Emulation Service(CES) ports.
Imported Objects
| BASIS-MIB | circuitEmulation |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.3.1 | NodecesmPort | |||
| 1.3.6.1.4.1.351.110.5.3.1.1 | NodecesmPortCnfGrp | |||
| 1.3.6.1.4.1.351.110.5.3.1.1.1 | TablecesmPortCnfGrpTable | not-accessible | current | The config table is for CES logical port. This is used for configuring the port type and number of DS0s and number of Subcircuits in DS0 on the CES port. |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1 | RowcesmPortCnfGrpEntry | not-accessible | current | An entry for each logical port. Each entry contains information on the port type, DS0s configured and number of DS0 subcircuits. |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.1 | ColumncesPortNum | read-only | current | This object identifies the logical port number. The range support depends upon the type of the service module(Card). - 8 port T1 Card, range is 1..192. - 8 por… |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.2 | ColumncesPortRowStatus | read-write | current | This variable enables or modifies the port 1 - add : Add a logical port 2 - del : Delete a logical port 3 - mod : Modify a logical port. |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.3 | ColumncesPortLineNum | read-write | current | This object represents the line number to which this port is associated. The supported range depends upon the type of service module(card). |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.4 | ColumncesPortType | read-write | current | This object represents port type whether it is carrying subrate circuits. structured : This is for SDT(Structured Data Transfer). This type of port supports fo… |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.5 | ColumncesPortDs0ConfigBitMap | read-write | current | This represents bit map of DS0s for a line which are used to form this logical port. Bit 0 represents DS0-1. |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.6 | ColumncesPortNumOfDs0Slot | read-write | current | This represents number of DS0 time slots configured to this Port. If the cesPortType is strau(4), then this can not have more than 1 DS0 time slot. |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.7 | ColumncesPortNumOfSCIPerDS0 | read-write | current | This object represents number of subcircuit in the DS0 time slot. This is applicable only when cesPortType is strau(4). 8 = there are 8 no .of 8kbps links (1 b… |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.8 | ColumncesPortSpeed | read-only | current | This object identifies the configured speed of port. Max speed for T1 = 1544 Max speed for E1 = 2038 Max speed for T3 = 44736 Max speed for E3 = 34368. |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.9 | ColumncesPortState | read-only | current | This variable indicates the state of the logical port. The possible values are : notConfigured (1) : Port is not configured active (2) : Port is in active stat… |
| 1.3.6.1.4.1.351.110.5.3.1.1.1.1.10 | ColumncesPortBERTEnable | read-write | current | This variable enables/disables BERT. This object is not supported in CESM-T3E3. |
| 1.3.6.1.4.1.351.110.5.3.1.1.2 | ScalarcesPortNextAvailable | read-only | current | This variable contains the next UNUSED logical port number of the possible 32 DS0s * n ports. This number can be used in channel config table, the cesportNextA… |
| 1.3.6.1.4.1.351.110.5.3.1.1.3 | ScalarcesPortsUsedLine1 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.110.5.3.1.1.4 | ScalarcesPortsUsedLine2 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.110.5.3.1.1.5 | ScalarcesPortsUsedLine3 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.110.5.3.1.1.6 | ScalarcesPortsUsedLine4 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1. This is for lin… |
| 1.3.6.1.4.1.351.110.5.3.1.1.7 | ScalarcesPortsUsedLine5 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.110.5.3.1.1.8 | ScalarcesPortsUsedLine6 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.110.5.3.1.1.9 | ScalarcesPortsUsedLine7 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.110.5.3.1.1.10 | ScalarcesPortsUsedLine8 | read-only | current | Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1 This is for line… |
| 1.3.6.1.4.1.351.150.40 | IdentityciscoWanCesPortMIB | The MIB module to configure the Circuit Emulation Service(CES) ports. | ||
| 1.3.6.1.4.1.351.150.40.2 | NodeciscoWanCesPortMIBConformance | |||
| 1.3.6.1.4.1.351.150.40.2.1 | NodeciscoWanCesPortMIBGroups | |||
| 1.3.6.1.4.1.351.150.40.2.1.1 | GroupciscoWanCesPortsUsedGroup | current | The collection of objects which are applicable for general information about logical ports. | |
| 1.3.6.1.4.1.351.150.40.2.1.2 | GroupciscoWanCesPortConfGroup | current | The collection of objects which are used to represent Circuit Emulation Service Port information. | |
| 1.3.6.1.4.1.351.150.40.2.1.3 | GroupciscoWanCesPortDs0InDs1Group | current | The collection of objects related to information on DS0 time slots used in each DS1 line. | |
| 1.3.6.1.4.1.351.150.40.2.2 | NodeciscoWanCesPortMIBCompliances | |||
| 1.3.6.1.4.1.351.150.40.2.2.1 | ComplianceciscoWanCesPortCompliance | current | The compliance statement for objects related to CES Logical Ports. |