CISCO-WAN-FEEDER-MIB
26 objects
This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary feature, provides connection management for network with only CISCO nodes such as BPX or IGX. Feeder - An external ATM switch, which does not have PNNI feature, connected to an ATM switch that supports PNNI to provide LMI. LMI - Local Management Interface is an interface to provide a set of enhancements to Frame Relay specification for managing complex internetworks. LMI extensions include global addressing, virtual-circuit status messages, and multicasting. XLMI - The Extended LMI is a type of LMI which is implemented in an AR + PNNI network.
Imported Objects
| CISCOWAN-SMI | ciscoWan |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.15 | IdentityciscoWanFeederMIB | This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary… | ||
| 1.3.6.1.4.1.351.150.15.1 | NodecwfMIBObjects | |||
| 1.3.6.1.4.1.351.150.15.1.1 | NodecwfFeeder | |||
| 1.3.6.1.4.1.351.150.15.1.1.1 | TablecwfFeederTable | not-accessible | current | This table contains the entries for the feeders. It is used for addition or deletion of feeders and to support LMI on the feeders. The information in these ent… |
| 1.3.6.1.4.1.351.150.15.1.1.1.1 | RowcwfFeederEntry | not-accessible | current | An entry in cwfFeederTable. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.1 | ColumncwfFeederIfNum | not-accessible | current | This is an unique interface number of an ATM virtual interface. The value of this object is equal to the ifIndex of the ATM virtual interface interface identif… |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.2 | ColumncwfFeederName | read-only | current | This is the name of the feeder. It contains a string of length zero, if the feeder name is not available. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.3 | ColumncwfLanIP | read-only | current | This is the LAN IP address of the feeder. This IP address is used for ethernet interface. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.4 | ColumncwfNetIP | read-only | current | This is the network IP address of the feeder. This IP address is used for ATM interface. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.5 | ColumncwfRemoteShelf | read-only | current | This is the remote shelf number of the feeder module. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.6 | ColumncwfRemoteSlot | read-only | current | This is the remote slot number of the feeder module. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.7 | ColumncwfRemotePort | read-only | current | This is the remote physical port(line) number of the feeder module. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.8 | ColumncwfFeederType | read-only | current | |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.9 | ColumncwfModelNumber | read-only | current | This identifies the feeder model number. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.10 | ColumncwfLMIAdminStatus | read-create | current | This provides the feeder LMI admin state configuration capabilities for the desired state of interface. The value of this object is ignored during row creation. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.11 | ColumncwfLMIOperStatus | read-only | current | This provides the operational state of the LMI connection. |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.12 | ColumncwfFeederNodeAlarm | read-only | current | This identifies the feeder node alarm status. It provides the alarm status in hierarchical order where by if there are no feeder node alarms, it is signified b… |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.13 | ColumncwfFeederRowStatus | read-create | current | This is used for adding or deleting a feeder entry. The row can be created by setting this object to 'createAndGo(4)'. The row can be deleted by setting this o… |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.14 | ColumncwfLMIType | read-create | current | This identifies the LMI type. It identifies the type of network to which the LMI port is connected to. |
| 1.3.6.1.4.1.351.150.15.3 | NodecwfMIBConformance | |||
| 1.3.6.1.4.1.351.150.15.3.1 | NodecwfMIBCompliances | |||
| 1.3.6.1.4.1.351.150.15.3.1.1 | CompliancecwfMIBCompliance | deprecated | The compliance statement for feeder group. | |
| 1.3.6.1.4.1.351.150.15.3.1.2 | CompliancecwfMIBCompliance2 | current | The Compliance statement for feeder group. | |
| 1.3.6.1.4.1.351.150.15.3.2 | NodecwfMIBGroups | |||
| 1.3.6.1.4.1.351.150.15.3.2.1 | GroupcwfFeederGroup | deprecated | The objects related to configuring a feeder. | |
| 1.3.6.1.4.1.351.150.15.3.2.2 | GroupcwfFeederGroup2 | current | The objects related to configuring feeder and non-feeder(XLMI). |