CISCO-WAN-MODULE-MIB
34 objects
The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM) is defined as any Module which provides services such as ATM, Frame Relay or Voice in a Wide Area Network(WAN) switch.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.145 | IdentityciscoWanModuleMIB | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM) is defined as any Module whi… | ||
| 1.3.6.1.4.1.9.9.145.1 | NodecwmMIBObjects | |||
| 1.3.6.1.4.1.9.9.145.1.1 | NodecwmConfig | |||
| 1.3.6.1.4.1.9.9.145.1.1.1 | TablecwmConfigTable | not-accessible | current | This table contains objects required for configuring module specific parameters. These parameters may be related to the hardware specific parameters which can … |
| 1.3.6.1.4.1.9.9.145.1.1.1.1 | RowcwmConfigEntry | not-accessible | current | Entry containing information for each module. |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.1 | ColumncwmIndex | not-accessible | current | This object's value generally corresponds to the slot number where the module resides. However, system wide uniqueness is the only true requirement. |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.2 | ColumncwmIngressSCTFileId | read-write | current | The file ID of the Service Class Template(SCT) file. The SCT holds the connection specific parameters for this module in the ingress direction(From Network to … |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.3 | ColumncwmIngressSCTFileName | read-write | current | This variable contains the SCT filename. Write access is not required. The filename has cwmIngressSCTFileId value as the suffix. For example, the value SCT.ING… |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.4 | ColumncwmAutoLineDiagEnable | read-write | current | This object enables/disables automatic diagnostic feature of physical lines on module. In case of a line alarm, enabling this feature temporarily suspends traf… |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.5 | ColumncwmSCTFileVerCfg | read-write | current | The Configured version of the Service Class Template(SCT) file. This version applies to both the card SCT and the port SCT files in a service module. The port … |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.6 | ColumncwmSCTFileVerOpr | read-only | current | The operational version of the Service Class Template(SCT) file. This is sct version currently in use. The operational version could be different from the conf… |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.7 | ColumncwmUploadCounter | read-only | current | This counter is used by the management station to determine if any changes(other than ATM/FR connections) have been done on configuration of a card. The use of… |
| 1.3.6.1.4.1.9.9.145.1.2 | NodecwmStatsConfig | |||
| 1.3.6.1.4.1.9.9.145.1.2.1 | TablecwmStatConfigTable | not-accessible | current | This table has objects required for configuring module statistic collection related parameters. The statistics related to interfaces and ATM Connections are st… |
| 1.3.6.1.4.1.9.9.145.1.2.1.1 | RowcwmStatConfigEntry | not-accessible | current | Entry containing statistics configuration information for the module. |
| 1.3.6.1.4.1.9.9.145.1.2.1.1.1 | ColumncwmStatBucketInterval | read-write | current | This object contains the bucket interval in minutes used in collecting statistics. This specifies the interval over which the module accumulates a sample. This… |
| 1.3.6.1.4.1.9.9.145.1.2.1.1.2 | ColumncwmStatCollectionInterval | read-write | current | The collection interval of statistics. Within a sampling interval, as defined by cwmStatBucketInterval, statistics counters are updated every collection interv… |
| 1.3.6.1.4.1.9.9.145.1.2.1.1.3 | ColumncwmStatCollectionStatus | read-write | current | Enables or disables statistics collection on the module. |
| 1.3.6.1.4.1.9.9.145.1.2.1.1.4 | ColumncwmStatCurrentLevel | read-only | current | The current statistics level of the module. A change in the card statistic level can take place only after a module reset. This object shows the current module… |
| 1.3.6.1.4.1.9.9.145.1.2.1.1.5 | ColumncwmStatLevelConfigured | read-write | current | This object is used to configure the statistics level for the module. The statistics level value set in this object will take effect only on reset of the modul… |
| 1.3.6.1.4.1.9.9.145.1.2.1.1.6 | ColumncwmStatMaximumConnections | read-only | current | The maximum number of connections for which the statistics are being collected. |
| 1.3.6.1.4.1.9.9.145.2 | NodeciscoWanModuleMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.145.2.0 | NodeciscoWanModuleMIBNotifications | |||
| 1.3.6.1.4.1.9.9.145.3 | NodeciscoWanModuleMIBConformance | |||
| 1.3.6.1.4.1.9.9.145.3.1 | NodeciscoWanModuleMIBCompliances | |||
| 1.3.6.1.4.1.9.9.145.3.1.1 | ComplianceciscoWanModuleMIBCompliance | read-only | deprecated | The Compliance statement for cwmConfigGroup group. |
| 1.3.6.1.4.1.9.9.145.3.1.2 | ComplianceciscoWanModuleMIBComplianceRev1 | read-only | deprecated | The Compliance statement for cwmConfigGroup group, with addition of SCT file versioning |
| 1.3.6.1.4.1.9.9.145.3.1.3 | ComplianceciscoWanModuleMIBComplianceRev2 | read-only | current | The Compliance statement for cwmConfigGroup group, with addition of SCT file versioning |
| 1.3.6.1.4.1.9.9.145.3.2 | NodeciscoWanModuleMIBGroups | |||
| 1.3.6.1.4.1.9.9.145.3.2.1 | GroupcwmConfigGroup | current | Group containing Module Specific Parameters. | |
| 1.3.6.1.4.1.9.9.145.3.2.2 | GroupcwmStatConfigGroup | current | Group containing statistics configuration. | |
| 1.3.6.1.4.1.9.9.145.3.2.3 | GroupcwmConfigGroup2 | current | Group containing additional Module Specific Parameters. | |
| 1.3.6.1.4.1.9.9.145.3.2.4 | GroupcwmUploadGroup | current | Group containing objects related to configuration changes in a card. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| StatisticsLevel | INTEGER{ notApplicable(0), levelOne(1), levelTwo(2), levelThree(3) } | current | Used to configure level statistics on service module. Statistic level on a module dictates the type and amount of statistics that is collected. There is a predefined set of statistics associated with each level and are … |