CISCO-WAN-RPM-CONN-EXT-MIB
20 objects
This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Module (RPM).
Imported Objects
| CISCO-WAN-ATM-CONN-MIB | cwAtmChanCnfgEntry |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.9 | IdentityciscoWanRpmConnExtMIB | This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Module (RPM). | ||
| 1.3.6.1.4.1.351.150.9.1 | NodecwRpmConnExtMIBObjects | |||
| 1.3.6.1.4.1.351.150.9.1.1 | NodecwRpmConnExt | |||
| 1.3.6.1.4.1.351.150.9.1.1.1 | TablecwRpmChanExtTable | not-accessible | current | This table together with the 'cwAtmChanCnfgTable' support provisioning of PVC endpoints and SPVCs on an RPM. This table contains objects that are specific to R… |
| 1.3.6.1.4.1.351.150.9.1.1.1.1 | RowcwRpmChanExtEntry | not-accessible | current | Each entry contains RPM specific parameters for a connection endpoint on an RPM. |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.1 | ColumncwrChanSubInterface | read-create | current | The RPM's backplane sub-interface for which this channel is configured. Sub-interface 0 means the switch port. |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.2 | ColumncwrChanVcd | read-only | current | Virtual Circuit Descriptor. A unique number which identifies a connection. |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.3 | ColumncwrChanAalEncapType | read-create | current | ATM adaptation layer (AAL) and Encapsulation type. aal5ciscoPPP - For Cisco PPP over ATM. 'cwrChanVirtualTemplate' is required to be set for this type. aal5mux… |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.4 | ColumncwrChanVirtualTemplate | read-create | current | This object identifies the virtual template. The non-zero value need to be specified for Cisco PPP or MUX-type PPP encapsulation (i.e. cwrChanAalEncapType = aa… |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.5 | ColumncwrChanInArpInterval | read-create | current | This specifies how often Inverse ARP datagrams will be sent on this channel. 0 will disable the InArp for this channel. This object is only supported for aal5s… |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.6 | ColumncwrChanOamLoopbkTxInterval | read-create | current | This specifies how often to generate an OAM F5 loopback cell from this channel. 0 will disable generation of OAM F5 loopback cells. |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.7 | ColumncwrChanOamManage | read-create | current | This enables/disables OAM management for this channel. If set to true(1), OAM management is enabled. |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.8 | ColumncwrChanOamRetryUpCount | read-create | current | Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up. This object only applies… |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.9 | ColumncwrChanOamRetryDownCount | read-create | current | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC connection state to down. This object only appli… |
| 1.3.6.1.4.1.351.150.9.1.1.1.1.10 | ColumncwrChanOamRetryInterval | read-create | current | The frequency that end-to-end F5 OAM loopback cells are transmitted when a change in UP/DOWN state of a PVC is being verified. This object only applies if OAM … |
| 1.3.6.1.4.1.351.150.9.2 | NodeciscoWanRpmConnExtMIBConformance | |||
| 1.3.6.1.4.1.351.150.9.2.1 | NodeciscoWanRpmConnExtMIBCompliances | |||
| 1.3.6.1.4.1.351.150.9.2.1.1 | ComplianceciscoWanRpmConnExtMIBCompliance | current | The compliance statement for the Cisco MGX RPM connection management group. | |
| 1.3.6.1.4.1.351.150.9.2.2 | NodeciscoWanRpmConnExtMIBGroups | |||
| 1.3.6.1.4.1.351.150.9.2.2.1 | GroupciscoWanRpmConnExtMIBGroup | current | Objects related to ATM connection in RPM module. |